Cant see the changes in portal

Hi..
I cannot see the changes I made to the message pool. To change the texts in the roadmap I did some changes . Then rebuilt it and deployed. went to portal and ran the application but cant see those changes in the road map. Any help would be appreciated. T

Hi Pankaj,
Reload your project and deploy. It will take new messages from Messagepool.
Try cleaning cache in the Explorer.
Regards,
Sridhar

Similar Messages

  • Admin can see changes to the page, but User cant see the changes.

    Hi All,
    I am a brand new SharePoint admin for a school. Faculty/Staff access the site collection as well as the students. Faculty and Staff have higher rights than the students, and can add content as well as view them. 
    As the site collection administrator, I have added a html webpart and added html code to a subsite. (the code is simply hyperlinks that route to a different page when clicked, nothing complex).
    I made these changes and can view them properly as the site collection admin when I check in the site. I then signed out as the site collection admin, and signed in using a dummy student account. I went back to the same page where I made the changes, and
    cannot see them. 
    The url of the site is the same for both administrator/student. 
    Please see photos for a better understanding. 
    I want to edit the subsite and make these changes so everyone can see it. 
    This first image is from the administrator's perspective. (As you can see, even the top navigation bar is different as well)
    This second image below is from the student's perspective. (You can see the hyperlinks don't show, and that the top navigation bar is different)

    Hope you have checked-in and published the page...
    If you don't publish the pages, your students may not see the changes.
    Ram Prasad Meenavalli | MCITP | MCTS SharePoint | MCPD SharePoint | http://www.spdeveloper.co.in

  • My itunes screen is black and i cant see the writing how do i change the colour

    My itunes screen is black when im trying to find music - how do i change the colour as i cant see the writing

    With that one, perhaps try Drgoo's suggestion from the following post:
    Re: Itunes Store - ALL Text Black/Cant See Anything

  • How to see the iview in portal favorite

    Hi,
         It is possible to see the iview in portal favorite without giving content admin role. How to add the iview created in portal to display in portal favorite.
    Thanks,
    Kundan

    Hi,
    Your question is not very clear for me....According to my understanding i am replying u.
    Portal favourites is itself an iview.
    If u want to show some other iview in place of Portal favourites then you need to do some changes in your framework page.
    Go to content admin and go to your framework page ---> select Desktop Innner Page
    then u can see Portal favourites iview there.
    If u want to show some ivew in  place of portal favourites, then delete Portal favourites and add the iview which u want to display.
    ~Raju
    Edited by: V R K Raju P on Sep 9, 2009 3:31 PM

  • How to see the changed output for purchase order

    Hi..
    I have zmedruck. i need to increse item text lengh. i done this in editor. how to see the changed output now...I increased the length of text to be displayed. I checked the print preview in me23n. i cant see the increased length. Guide me where i am wrong.
    Edited by: Meena 303 on May 1, 2008 6:24 PM

    Hi
      In ME22N go to message -
    > select old message -
    >click change OutPut button -
    > Save
    then see print priview  through ME9F or ME22N it sself.
    regards
    Sachin

  • Browser is to short cant see the right side

    i do not know which plug in is causing the browser page where you cant see the right side of the page and the writing and i am getting to where i dont like firefox for the add ons i need and want is not compatablie and dont know how to find out which version has the ones i want. not very happy any more

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Hi, I have a late 2011 MacBook Pro but cant get the mirroring function to work with Apple TV.  I've got the most recent Software 10.7.5 but cant see the mirroring icon or turn this on.  I'm able to mirror from my Ipad but not my Mac, any thoughts?

    Hi, I have a late 2011 MacBook Pro but cant get the mirroring function to work with Apple TV.  I've got the most recent Software 10.7.5 but cant see the mirroring icon or turn this on.  I'm able to mirror from my Ipad but not my Mac, any thoughts?

    Welcome to the Apple Support Communities
    AirPlay Mirroring is supported on your Mac, but it needs OS X Mountain Lion (10.8). See > http://support.apple.com/kb/HT5404
    You have two possibilities:
    1. Make a backup, open App Store and purchase Mountain Lion to upgrade to this OS X. Then, you will find the AirPlay Mirroring icon at the top right of the display, on the menu bar, or on System Preferences > Displays.
    2. Keep OS X Lion and use AirParrot > http://www.airparrot.com
    Both options work properly, but I recommend AirPlay Mirroring as it doesn't need a third-party program

  • HT4942 After Creating a new document or editing an old document in Pages on my iPad I no longer see the changes in Pages on my iPhone. iCloud services are on with both devices.

    After Creating a new document or editing an old document in Pages on my iPad I no longer see the changes in Pages on my iPhone. iCloud services are on with both devices.

    Just thought I'd add my solution, I decided to go with WebDAV and I think it actually works better than the iTunes way, the steps are pretty much the same but avoiding the iTunes interface just makes things easier and faster.
    I followed this guide but it does have a small mistake in the httpd-dav.conf file, on line 2, where it's WebServer/WebDAV">, it should be <Directory "/Library/WebServer/WebDAV">.
    The tricky part is setting permissions which if wrong will give you errors when connecting with the iPad, I opted to set all to Read&Write since my home network has a hardware firewall. Another convenience was to add an alias to the webdav share on the Desktop.
    I'm still expecting the call from Apple but even if they fix the iTunes I'm sticking with WebDAV, atleast until I see what's new with iOS5 and iCloud this fall which should bring true sync for documents (I'm hoping that they will offer encryption with my own keys, if not, then I'll probably keep using WebDAV).

  • HT204291 Im trying to use my apple TV to see a movie from my iphone. Since i select the airplay icon on my phone, i can only hear the voice of the movie on my screen but i cant see the movie, can anybody help me pls? Tks

    Im trying to use my apple TV to see a movie from my iphone. Since i select the airplay icon on my phone, i can only hear the voice of the movie on my screen but i cant see the movie, can anybody help me pls? Tks

    Is this a movie from iTunes? If so is it a rental or one you've purchased?

  • I cant see the airplay icon on mi iphone 3gs

    i cant see the icon of airplay on my iphone 3gs i have a iphones 3gs wiht ios 5.1.1 i will like to use the airplay betewm mi iphone 3gs and my itunes on my pc , please help me with this NOTE I dont have a Mac i have PC with W7 but i read that is posible plesase help me , and itunes dont show me the icon , when i had a 3g he show me the icone but i cant see it 

    This is from the "Troubleshooting AirPlay" article:
    Resolution
    If the AirPlay icon doesn't appear
    Check for the AirPlay icon ( ) in the recently used apps section on your iOS device, or in iTunes on your computer (as in these articles about how to use AirPlay and how to use AirPlay Mirroring). The icon will only appear if your device or computer is logged onto a Wi-Fi network which has an AirPlay-enabled recipient, such as Apple TV (2nd generation or 3rd generation).
    If you are still unable to see the AirPlay icon, try one of the following steps:
    Verify that your AirPlay-enabled devices have the most up-to-date software or firmware.
    Verify that your iOS device has Wi-Fi turned on. Enable Wi-Fi on your iOS device by going to Settings > Wi-Fi.
    Verify that all your AirPlay-enabled devices are logged on to the same home Wi-Fi network (check the home network names on your devices to confirm).
    If trying to AirPlay, or AirPlay mirror, to your Apple TV (2nd or 3rd generation), ensure that AirPlay is enabled on your Apple TV as well. You can enable or disable AirPlay on Apple TV in the AirPlay menu: Settings > AirPlay
    Check Internet or network connectivity on all affected devices.
    Temporarily disable firewalls (both network and local) and security software. Security software and firewalls may block ports that AirPlay uses to stream content. You can often resolve issues with security software by updating, correctly configuring, or uninstalling security software.
    If attempting to use AirPlay from a third-party app or a website from your Safari app on your iOS device, confirm that the app or website is AirPlay compatible (refer to the developers of the app or website for additional information). 
    The entire article is at http://support.apple.com/kb/TS4215

  • I cant seem to scan from my hp photosmart 7520 printer to my iMac but can scan using the iMac? photosmart cant see the iMac.

    I cant seem to scan from my hp photosmart 7520 printer to my iMac but can scan using the iMac? Photosmart cant see the iMac. Mac is wired to the router printer over wi fi.

    Hi Shlomi
    It worked!!! Thanks so much, I've been messing about with this for hours.
    As you are so good I do have another problem. I have another 2 pc's on the network that show on the iMac but iMac cannot conect to. One is XP and the other is Vista both with Norton fire wall installed.
    Any thoughts you have would be much appriciated
    Rob

  • I dopped my iphone on the floor today and nothing cracked but when i tried to turn it on, the screen had a bunch of barcode like stripes. even though i cant see the screen, i was still able to type in my password and answer a phone call. how can i fix it?

    I dopped my iphone on the floor today and nothing cracked but when i tried to turn it on, the screen had a bunch of barcode like stripes. even though i cant see the screen, i was still able to type in my password and answer a phone call. how can i fix it?

    YOU can't fix it.  But you can bring it in to Apple for an out of warranty replacement for $199.

  • I did hold the ALT cmand r key but i cant see the globe i dont know how i can fix my macbook pro late 2008 can any 1 plzzzz help me im very upsate but i live PAKISTAN in here i cant find os x lion disk i dont know what to do if i get the os x lion usb

    i did hold the ALT cmand r key but i cant see the globe i dont know how i can fix my macbook pro late 2008 can any 1 plzzzz help me im very upsate but i live PAKISTAN in here i cant find os x lion disk i dont know what to do if i get the os x lion usb

    That does not work on model year older then 2010 and really doesn't work on any older then late 2011 models.
    You will need a set of original system dvd disc thjat are always sypplied with every mac sold before Lion came out. Systems older then late release early 2011 models.
    If you don't have them you kcan order a replacement set from apple by calling them. Have the serial number of you mac handy.

  • How to see the change logs for billing document

    Dears,
    Could you please how to see the change logs for billing document.
    My client is using ECC 6.0 & if i use VF03 > Environment > changes > does not show the changes i had made.
    Thanks in advance
    Ranjan

    hello, friend.
    you should be able to see changes done after the initial creation and saving, by going thru Environment > Changes.  try it again, and this time make sure that changes were done to the billing document prior to posting to accounting.
    normally, when configuration of Billing is done correctly, there will be little or no instances of changing anything in the Billing document,  as saving the document after creation will post this to Accounting.  of course, inclusion of a posting block in the billing type will provide you the opportunity for changes. 
    regards.

  • How to see the changes made in tx code MN05

    Hi all,
    Do you know how can I see the changes made in tx code MN05?
    I need to know when was The output condition updated? Do you have a change record on this change?
    Thanks and regards

    Hi,
    There is a Transaction code SCU3 to display the change logs
    Goto the Transaction code and enter the  Table for MN05 and execute, it will display all the logs for MN05.
    If you didnt find any change logs here, then you have to activate the Change logs for this table.
    To activate the change logs , goto SE11 and give the table and clcik on the technical settings and you will find the Check box with CHANGE LOGS.
    Check whether it was activated or not, if not activate it.
    Thanks,
    santosh

Maybe you are looking for

  • HT5312 You never said how can i add a rescue email to my existing account

    You never said how can i add a rescue email to my existing account

  • LV 8.5 DLL - Windows error on exit

    I created a DLL in a LabVIEW 8.5 project, and found that if I used the 'Call Library Function Node' in a subsequent LabVIEW 8.5 VI, the DLL functions worked perfectly, but after I exited LabVIEW I would get the attached error from Windows. I then cre

  • Itunes Library reinstalled from backup disk- but doesnt work without DISK

    i recently cleaned up some bugs on my computer. I also installed Avast antivirus. I turned off the computer- a couple days later when I turned it on-my itunes library was empty. I reinstalled the library from my backup disk now lots of songs onthe li

  • Line-In not working anymore

    I upgraded to Leopard tonight and surprise, my Line-In is not working anymore. I can't use my headphone's microphone. This is something very weird happening. Anyone has any idea what can be causing this?

  • Configuring ESS in NWDS

    Hi, I have downloaded the business package from the service market place. I have installed NWDS trial version in my local PC. Can anyone please answer my questions. 1.  How can i import the ESS project to the NWDS? 2.  Is JDI required for doing the i