Cant see the image in browser!

Hi
I have a jsp application where I am visiting some JPG image . I placed the image inside :
"C:\jakarta-tomcat-5.0.25\webapps\ROOT\reports\output\proe\"
I am able to see those image in my machine. I sent the link of my application to my supervisor. He is able to run the application but he cant view those image rather than some cross signs. Any idea why is that? .This is my first web application. Still needs to know lot of stuff. Pls help/suggest me.
Regards

This may be caused by a Tomcat configuration issue.
When you say "application", do you mean web application.. Have you created a web application directory within the webapps folder or are you using the default, as your directory structure would suggest..
You mention a jsp application.. Do you mean you have developed a jsp page which contains an image..Do you have a jsp page at CATALINA_HOME/webapps/ROOT ...
I suggest reviewing a bit about web applications and Tomcat deployment to help you solve this issue.
http://jakarta.apache.org/tomcat/tomcat-5.0-doc/setup.html
http://jakarta.apache.org/tomcat/tomcat-5.0-doc/appdev/index.html
http://www.coreservlets.com/Apache-Tomcat-Tutorial/

Similar Messages

Cant see the image but I can hear it, any suggestions?

I have just uploaded the new version of QT and try to play a 1280x720 Mov in it but the image is not there while I can hear the sounds.
I tryed playing a 4:3 dv mov and it was fine, any help would be great.
Alex

I have same problem as Alex, I also have latest version of QT with no pictures but can hear sound.
The video guy that transfered the DV tapes for me can play the HD clips from the tape in QT and iMovie (both older versions than mine).
Kenedy, I have the Movie Inspector up, now how do I search for the codec?
Being a still photographer this language is pretty foreign to me. Any help appreciated.
Thanks in advance.
GHP

Browser is to short cant see the right side

i do not know which plug in is causing the browser page where you cant see the right side of the page and the writing and i am getting to where i dont like firefox for the add ons i need and want is not compatablie and dont know how to find out which version has the ones i want. not very happy any more

Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

I am unable to see the images in Aperture trash, though there are a number indicated in the trash. I have "show all" selected. What settings am I missing?

I am unable to see the images in Aperture trash, though there are a number indicated in the trash. I have "show all" selected. What settings am I missing?

You may have an invisible filter on your trash.
Try the "Double Caggiano", as described in Frank Caggiano's User tip:
Images not appearing in browser, search filter is cleared
Regards
Léonie

I cant view the image or take a snap shot in my i phone 5s

I cant view the image when camera is on

Use the "Camera" app to make images.
Use "Photos" to view or organize them.
For more info or help with other apps, see your iPhone iOS 8.1 User Guide or see it here on the internet.
Message was edited by: EZ Jim
Mac OSX 10.10.2

Hi, I have a late 2011 MacBook Pro but cant get the mirroring function to work with Apple TV. I've got the most recent Software 10.7.5 but cant see the mirroring icon or turn this on. I'm able to mirror from my Ipad but not my Mac, any thoughts?

Hi, I have a late 2011 MacBook Pro but cant get the mirroring function to work with Apple TV. I've got the most recent Software 10.7.5 but cant see the mirroring icon or turn this on. I'm able to mirror from my Ipad but not my Mac, any thoughts?

Welcome to the Apple Support Communities
AirPlay Mirroring is supported on your Mac, but it needs OS X Mountain Lion (10.8). See > http://support.apple.com/kb/HT5404
You have two possibilities:
1. Make a backup, open App Store and purchase Mountain Lion to upgrade to this OS X. Then, you will find the AirPlay Mirroring icon at the top right of the display, on the menu bar, or on System Preferences > Displays.
2. Keep OS X Lion and use AirParrot > http://www.airparrot.com
Both options work properly, but I recommend AirPlay Mirroring as it doesn't need a third-party program

When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and th

When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and they no longer play in the monitor window. I hear the sound track, but do not see any video. Have I changed some setting that controls video playback in the monitor window?

Randy Ruttger
Thanks for the follow up.
Missing in this equation were the version of Premiere Elements that you were using and the computer operating system on which it was running. But...
The deed is done. But.....Until now and after you went ahead and moved to version 12, we now learn what version of Premiere Elements you were using. We still do not know the computer operating system involved.
You just said Premiere Elements 10. Premiere Elements 10 is hit by a serious known display issue if the computer uses a NVIDIA GeForce video card/graphics card. In this issue, the only remedy is to roll back the driver version to about May 2013. The description of the problem and how to do the roll back are described in one of the Announcements at the top of this forum. What video card/graphics card does your computer use?
On another front, Adobe will be releasing a new version of Premiere Elements any day now. No one but Adobe knows the feature set for the new version. That type of information is announced at the moment of release of the new version.
So the remedy to the problem that you presented in this thread could have been...
1. Rolling back the NVIDIA GeForce driver version to about May 2013 if possible (Windows 8 or 8.1 64 bit, may not be possible)
2. Move to another version of Premiere Elements (which you did)
I offer the above for consideration so that you can review your decisions. We are pleased to learn that Premiere Elements 12/12.1 works for you.
Please do not hesitate to ask questions and ask for clarifications, but remember that the answers are in the details.
Best wishes,
ATR

I can't see the images on a web page, instead of them I get an interrogation.

I can't see the images on a web page, instead of them I get an interrogation.This is only one page, and none of the browsers can view your images, and this happened after updating the operating system to Yosemite.

Safari > Preference > Advanced
Checkmark the box for "Show Develop menu in menu bar".
"Develop" menu will appear in the Safari menu bar
Enable Images.
Make sure that"Disable Images" is not enabled.

HT204291 Im trying to use my apple TV to see a movie from my iphone. Since i select the airplay icon on my phone, i can only hear the voice of the movie on my screen but i cant see the movie, can anybody help me pls? Tks

Im trying to use my apple TV to see a movie from my iphone. Since i select the airplay icon on my phone, i can only hear the voice of the movie on my screen but i cant see the movie, can anybody help me pls? Tks

Is this a movie from iTunes? If so is it a rental or one you've purchased?

I cant see the airplay icon on mi iphone 3gs

i cant see the icon of airplay on my iphone 3gs i have a iphones 3gs wiht ios 5.1.1 i will like to use the airplay betewm mi iphone 3gs and my itunes on my pc , please help me with this NOTE I dont have a Mac i have PC with W7 but i read that is posible plesase help me , and itunes dont show me the icon , when i had a 3g he show me the icone but i cant see it

This is from the "Troubleshooting AirPlay" article:
Resolution
If the AirPlay icon doesn't appear
Check for the AirPlay icon ( ) in the recently used apps section on your iOS device, or in iTunes on your computer (as in these articles about how to use AirPlay and how to use AirPlay Mirroring). The icon will only appear if your device or computer is logged onto a Wi-Fi network which has an AirPlay-enabled recipient, such as Apple TV (2nd generation or 3rd generation).
If you are still unable to see the AirPlay icon, try one of the following steps:
Verify that your AirPlay-enabled devices have the most up-to-date software or firmware.
Verify that your iOS device has Wi-Fi turned on. Enable Wi-Fi on your iOS device by going to Settings > Wi-Fi.
Verify that all your AirPlay-enabled devices are logged on to the same home Wi-Fi network (check the home network names on your devices to confirm).
If trying to AirPlay, or AirPlay mirror, to your Apple TV (2nd or 3rd generation), ensure that AirPlay is enabled on your Apple TV as well. You can enable or disable AirPlay on Apple TV in the AirPlay menu: Settings > AirPlay
Check Internet or network connectivity on all affected devices.
Temporarily disable firewalls (both network and local) and security software. Security software and firewalls may block ports that AirPlay uses to stream content. You can often resolve issues with security software by updating, correctly configuring, or uninstalling security software.
If attempting to use AirPlay from a third-party app or a website from your Safari app on your iOS device, confirm that the app or website is AirPlay compatible (refer to the developers of the app or website for additional information).
The entire article is at http://support.apple.com/kb/TS4215

I cant seem to scan from my hp photosmart 7520 printer to my iMac but can scan using the iMac? photosmart cant see the iMac.

I cant seem to scan from my hp photosmart 7520 printer to my iMac but can scan using the iMac? Photosmart cant see the iMac. Mac is wired to the router printer over wi fi.

Hi Shlomi
It worked!!! Thanks so much, I've been messing about with this for hours.
As you are so good I do have another problem. I have another 2 pc's on the network that show on the iMac but iMac cannot conect to. One is XP and the other is Vista both with Norton fire wall installed.
Any thoughts you have would be much appriciated
Rob

I dopped my iphone on the floor today and nothing cracked but when i tried to turn it on, the screen had a bunch of barcode like stripes. even though i cant see the screen, i was still able to type in my password and answer a phone call. how can i fix it?

I dopped my iphone on the floor today and nothing cracked but when i tried to turn it on, the screen had a bunch of barcode like stripes. even though i cant see the screen, i was still able to type in my password and answer a phone call. how can i fix it?

YOU can't fix it. But you can bring it in to Apple for an out of warranty replacement for $199.

I did hold the ALT cmand r key but i cant see the globe i dont know how i can fix my macbook pro late 2008 can any 1 plzzzz help me im very upsate but i live PAKISTAN in here i cant find os x lion disk i dont know what to do if i get the os x lion usb

i did hold the ALT cmand r key but i cant see the globe i dont know how i can fix my macbook pro late 2008 can any 1 plzzzz help me im very upsate but i live PAKISTAN in here i cant find os x lion disk i dont know what to do if i get the os x lion usb

That does not work on model year older then 2010 and really doesn't work on any older then late 2011 models.
You will need a set of original system dvd disc thjat are always sypplied with every mac sold before Lion came out. Systems older then late release early 2011 models.
If you don't have them you kcan order a replacement set from apple by calling them. Have the serial number of you mac handy.

How do I drag an image or text box to the "workspace" off of my working file but where I can still see the image and text box for future use?

How do I drag an image or text box to the "workspace" off of my working file but where I can still see the image and text box for future use?
When I drag the item off of the trifold that I am creating, it just disappears but I still want to use it. I just need to move it out of the way to modify other portions of the document.
thanks,
C

Add another page below the current one to use as a storage area. You can't use the grey area around the page for storing items you want to use later.
Go to the Pages Menu>Provide Pages Feedback if you would like to request this feature be added in future versions.

How to see the image from server

hi,
I have uploaded an image to server using following code. I want to see the image from server now. When i open this page then it show image. But when i want to see this image from server then it shows blank. Whats the problem of my code? Give me solution.
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
<%@ page import="org.apache.commons.fileupload.*" %>
<%@ page import ="org.apache.commons.fileupload.servlet.*" %>
<%@ page import ="java.util.*" %>
<%@ page import ="java.io.*" %>
</head>
<title>User Registration page</title>
<body>
<%
boolean isMultipart = ServletFileUpload.isMultipartContent(request);
FileItemFactory factory=new org.apache.commons.fileupload.disk.DiskFileItemFactory();
ServletFileUpload upload =new ServletFileUpload(factory);
List items = upload.parseRequest(request);
Iterator iter = items.iterator();
 while (iter.hasNext()) {
 FileItem item = (FileItem) iter.next();
 if (!item.isFormField()) {
 String path=application.getRealPath("/");
 File tempfile=new File(item.getName());
 File uploadfile=new File(path,tempfile.getName());
 item.write(uploadfile);
 %>
 
<img src="<%=uploadfile%>" height="100" width="100">
 
<%=uploadfile%>
<%
item.delete();
%>
</body>
</html>Is there anybody can help me.
With regards
Bina

<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
<%@ page import="org.apache.commons.fileupload.*" %>
<%@ page import ="org.apache.commons.fileupload.servlet.*" %>
<%@ page import ="java.util.*" %>
<%@ page import ="java.io.*" %>
</head>
<title>User Registration page</title>
<body>
<%
String filename = "";
boolean isMultipart = ServletFileUpload.isMultipartContent(request);
FileItemFactory factory=new org.apache.commons.fileupload.disk.DiskFileItemFactory();
ServletFileUpload upload =new ServletFileUpload(factory);
List items = upload.parseRequest(request);
Iterator iter = items.iterator();
 while (iter.hasNext()) {
 FileItem item = (FileItem) iter.next();
 if (!item.isFormField()) {
 String path=application.getRealPath("/");
 filename = item.getName();
 File tempfile=new File(filename);
 File uploadfile=new File(path,tempfile.getName());
 item.write(uploadfile);
 %>
 
<img src="<%=path+filename%>" height="100" width="100">
 
<%=uploadfile%>
<%
item.delete();
%>
</body>
</html>

Cant see the image in browser!

Similar Messages

Maybe you are looking for