Cant see the option to login as microsoft account on system after windows 8 was refreshed with 8.1

My system came with Windows8 installation. And I created my windows account on this. 
Later it prompted for 8.1 update and I went with that.
After 8.1 got installed, I also created my local account. 
I logged in as local account (also admin account) and then logged out. first issue came as system errored out once I tried to login as microsoft account now. I dont know why.. It was not wrong password error. It just said error logging into microsoft account
Now I do not see an option to login as microsoft account. PLease note, I do not even see this listed in user accounts.
There are other issues too, like for every folder, I need to specifically provide admin access even if I am logged in as local administrator account. But I am fine with these issues.Obviously, they irritate :). 
But I would like to resolve the microsoft account issue first.. HOw do I get it back .. 

Hi,
Please check your Microsoft Account status in User Account Manager：Control Panel\User Accounts\User Accounts
In addition, please access to the path of registry to check your Microsoft Account if it locate there.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList.
If problem persists, the workaround method may be need you delete and readd your Microsoft Account on your computer.
Roger Lu
TechNet Community Support

Similar Messages

  • In smartform editor cant see the option for making bold or italic

    hi EVERYONE,
    I Want to make a heading as BOLD but on my editor i cant see the option to make it as a bold
    i have given the SMART STYLE....i can see all the styles in my style but when i come to TEXT and write a heading...when u want to make it as a bold the editor does bot give me the options.
    how can i make it or what settings do i need to do to get the options.

    HI SRIDER,
    CAN YOU BE LITTLE MORE CLEAR PLS?
    I HAVE EX : doc no AS MY HEADING.
    I want to make DOC NO as bold
    i have in my editor like is
    Document no so how can i make it bold?
    thank you,
    pasala.

  • I cant see the option BW on connections voyager

    Hello!!!
      I have been installed the integration kit for SAP, but I can´t see in the Central Management Console specialy in the connections voyager the option to connect with BW SAP, how can I see the connection,
    thanks
    regards

    Hi -
    You should be able to see Voyager Connections at CMC home screen.  If you are not seeing Voyager Connection means you need to check below stuff. Thanks!
    1) It could be licencing issue. Make sure you have added correct licence key. Voyager licence comes separately.
    2) Check weather Voyager Service is running or not. Go to CMC --> Servers -->Server Categories --> Voyager --> Multi-Dimensional Analysis Services Server.
    Regards,
    Anesh B

  • Re: BB curve-8520 :Unable to see the option "add existing e-mail account" in the e-mail set up wizard

    Hi there!
    This is Md. Ashikur Rahman purchased a BB curve , model-8520 from India. Now I am in bangladesh & my service provider is Grameenphone. In the e-mail setup wizard I can see only one option which requires BB enterprise password to complete the set up. I think the other option- 'Add existing e-mail account' is locked.
    My service provider is unable to unlock. How can I use that option so I can complete my e-mail set up & comunicate over internet?
    Thanks.
    Ashikur

    Hi and Welcome to the Forums!
    Your service provider is exactly that...the provider of all of your services. If they cannot delivery PUSH email to you (or, for that matter, any other BIS-level services), then there's nothing anyone else can do.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Cant see the "send file","recieve file" option in bluetooth in windows 8 panel.

    I have the following laptop
    Hp Pavilion 17-e054
    I am running windows 8 in it. The problem is, I can see the Bluetooth option in the notification panel but it doesn't show me the send and recieve option in it. Everytime I have to send a file or recieve a file I have to go to RUN>fsquirt.
    This opens the transfer wizard. But this is too annoying and I don't get it why i can't see the option. I have just purchased the laptop and its bluetooth driver is preinstalled.
    This is the image of what I meant. 
    Any kind of help is appreciated.
    And sorry if it feels like the problem is already solved because I tried looking at the forum, I  couldn't find an appropriate thread. Thanks.

    Hi,
    Please check your Microsoft Account status in User Account Manager：Control Panel\User Accounts\User Accounts
    In addition, please access to the path of registry to check your Microsoft Account if it locate there.
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList.
    If problem persists, the workaround method may be need you delete and readd your Microsoft Account on your computer.
    Roger Lu
    TechNet Community Support

  • When i open fb, the page doesnot appear correctly.i cant see the login and password box properly and also half portion of the page appears white.

    the "signup part" and "connecting with friends" part which are bellow the email or phone and password box they appeared at the top of this page.and i cant see the Facebook logo.what can i do?

    hello rosun, please go through the steps covered in [[Websites look wrong or appear differently than they should]] - they should contain the most common solutions for the issue you've described...

  • Hi, I have a late 2011 MacBook Pro but cant get the mirroring function to work with Apple TV.  I've got the most recent Software 10.7.5 but cant see the mirroring icon or turn this on.  I'm able to mirror from my Ipad but not my Mac, any thoughts?

    Hi, I have a late 2011 MacBook Pro but cant get the mirroring function to work with Apple TV.  I've got the most recent Software 10.7.5 but cant see the mirroring icon or turn this on.  I'm able to mirror from my Ipad but not my Mac, any thoughts?

    Welcome to the Apple Support Communities
    AirPlay Mirroring is supported on your Mac, but it needs OS X Mountain Lion (10.8). See > http://support.apple.com/kb/HT5404
    You have two possibilities:
    1. Make a backup, open App Store and purchase Mountain Lion to upgrade to this OS X. Then, you will find the AirPlay Mirroring icon at the top right of the display, on the menu bar, or on System Preferences > Displays.
    2. Keep OS X Lion and use AirParrot > http://www.airparrot.com
    Both options work properly, but I recommend AirPlay Mirroring as it doesn't need a third-party program

  • How do u get help from apple support with iChat? I was able to chat with support last week to solve my problem but now the same issue is back and I don't see the option to chat now?

    qHow do u get help from apple support with iChat? I was able to chat with support last week to solve my problem but now the same issue is back and I don't see the option to chat now?

    For what it is worth I have noticed a similar issue from the iPad3 while at work and home. At work we have two Apple TV 3rd Generation installed and tied to our A/V system. I believe the issue has to do with a timeout on the broadcast saying "here I am" and allowing devices to connect.
    For example:
    At work we have several Wi-Fi SSID being broadcast from Cisco APs. The only one we can use with the Apple TV is the one that uses a WEP since the others are either setup to be hidden, require web page authentication, or have a login requirement from employees. Essentially, what I believe the issue is that the Apple TV periodically broadcasts a message to other iOS devices that support Mirroring. When the Apple TV does not get a response from a device it goes into a dormant mode and requires either a command from the remote control or a reboot. This has been tested with both the power management enabled and not enabled with the same results.
    As for when I come home, the Apple TV3 has not seen the device in some time and therefore is not broadcasting it's location information. A simple click of the circle or menu keys on the remote will give it the command to start broadcasting again and allow the iPad3 to see the Apple TV. When trying to Home Share the computer can not play (iTunes 11, Win8RTM) until the Apple TV is awoken then it will show up for mirroing.
    This may or may not assist you but, it hopefully explains how the issue may be happening.

  • I cant see bluetooth option while trying to transfer media files.

    Hi all,
    I have a Blackberry Torch 9810 with OS 7. I dont know what happened but all of a sudden I am unable to send files through bluetooth. I cant see any option of bluetooth in the send options menu.
    I tried to deseclect port service in the bluetooth options and saved it. Againg selected port service and saved it. I also restarted my device while doing this. But still I am unable to send files via bluetooth. 
    Can some one help me please. Thank you.

    Please restart the phone by removing and placing the battery back while the device is ON. This process fixes the application modules in it without losing any data stored. Let us know if you still experience the issue after this.
    Ron
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

  • I can't see the option NONE when I try to review my apple id on iTunes store

    Tried tto review my apple id on itunes store and i cant see the billing option NONE in there so i cant dl free apps...

    Did you follow the instructions on that page that I linked to ? I've just tried it and it worked ok for me, I got the 'none' option and have been able to download a free app with it.
    e.g. on my computer's iTunes I signed out of my existing account, found a free app in the store and clicked on its free 'price' :
    Clicked on 'create Apple id' on the popup :
    Agreed to the terms, filled in my details, and got 'none' as a payment option :
    After clicking on the verification email I was then able to download a free app. Are they the steps that you used to create the account ?

  • I cant see the list of apps in the itunes

    i cant see the apps list in the itunes when i go to the apps option in itunes when i connect the phone to the pc

    how can i make this adjust?

  • I want to rest my answer on appstor and i cant see the link to rest it

    i want to rest my answer on appstor and i cant see the link to rest it
    its not giving me the link pls send to me the link to my email        [email protected]
    thanks

    The link can't be sent in any way or made to appear without correctly answering two of the three security questions as documented in this article; if that's not an option, use the link in that article to contact the iTunes Store staff.
    (76579)

  • Cant see the boot drive when installing, what to do?

    Trying to install windows 7 on my MacBookPro 15” late 2013
    Using a SDcard and Boot disk
    Using Bootcamp Setup Assistant to create a partition and a boot disk via a 64 Win7 installer ISO file
    Everything looks fine, it copys everything to the SDCard, formats it to Fat, copying drivers and all, reboots but when the install screen comes up, it says that it cant find any bootable disk
    Have done it three times now; with different ISOs, but cant get it to see the installer, any tricks?
    Thanks

    One option is to download the drivers on the SDCard and just put the Windows ISO on the 4GB USB. If you are installing Windows 8.I have two separate disks of roughly 4GB each for 32-bit and 64-bit. I have created iso from the 64-bit disk on my desktop and can have Bootcamp drivers (~950MB) and the ISO fit on a 4GB USB.
    Also, after Windows install, you have read-only access to the OSX HFS+ partition, so you can copy Bootcamp drivers directly from the OSX side to the Windows Documents folder and install Bootcamp drivers, without needing the SDCard.

  • Can not see the option Execution with Data Change in the infoprovider?

    Hi team,
    i am using query designer 3.x, when i go into my bex brodcaster settings and schedule my report
    i can not see the option "Execution with Data Change in the infoprovider",
    i can only see 2 options
    Direct scheduling in background process
    create new scheduling
    periodic,
    is there any setting which i would be able to see the option "Execution with Data Change in the infoprovider"?
    kindly assist

    Hi Blusky ,
    check the below given link.
    http://help.sap.com/saphelp_nw04/Helpdata/EN/ec/0d0e405c538f5ce10000000a155106/frameset.htm
    Regards,
    Rohit Garg

  • How do I open with one click all the windows that I have been minimized? When I right click on the lower bar Firefox icon, I only see the option to close all windows.

    It is used to be that I could right click on the Firefox icon on the toolbar at the bottom of the screen and I would then be given the option to open all windows. Now I only see the option to close all windows. The ability to open all windows is very useful. Have you eliminated this capability? It was a very helpful feature because I often have more than 15 windows minimized at one time. On a regular basis I like to open them all and keep only the ones that I still need. I know that it is possible to see the name of each window that is minimized by moving my cursor over the Firefox icon, but this does not provide enough information. So I have to open each window one at a time to look at it and then decide to close it or keep it - this is a frustrating, time-consuming process. Is there another way to open all the minimized windows at the same time, instead of one at a time?

    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    You can retrieve the certificate and check details like who issued certificates and expiration dates of certificates.
    * Click the link at the bottom of the error page: "I Understand the Risks"
    Let Firefox retrieve the certificate: "Add Exception" -> "Get Certificate".
    * Click the "View..." button and inspect the certificate and check who is the issuer.
    You can see more Details like intermediate certificates that are used in the Details pane.

Maybe you are looking for