Cant see the video moving

In Imovie I get to see the small photograms that are shown in the lower part but if played. The image will be shown as a picture, no movement.

DVD Player is not supported with AirPlay Mirroring. I imagine this is due to content restrictions and DRM.

Similar Messages

  • Hi, I've got no music or videos on my ipad and itunes advise that I have 23gb of 'other' material therefore the sync is unable to perform. I was forced to perform a restore earlier and now cant see the videos/music so want to replace. Pls assist, thanks

    Hi, I'm unable to see if I have any music/videos/photos on my ipad and itunes advise that I have 23gb of 'other' material therefore the sync is unable to perform when  transfering music/videos to the ipad. I was forced to perform a restore earlier and now cant see the videos/music so want to replace. Pls assist, thanks

    23 GB  of other indicates a corrupt file(s).  A restore should resolve.

  • I cant see the Video of WMV file through Flip4mac, only audio is working fine on macbook pro. Could anyone please help?

    I cant see the Video of WMV file through Flip4mac, only audio is working fine on macbook pro. Could anyone please help?

    Hi,
    Check to see that external video is turned on.
    View > External Video > All Frames. and
    View > Video Playback > Apple Firewire PAL/NTSC.
    Sandeep

  • Cant see the videos that I captured from my camcorder, into iMovie, on my hard drive or in FCP.

    I can only see these files in my iMove Library. I cant see them at all from inside FCPX. I just want to import the video's I already captured from iMovie into FCPX.

    Version 10 of iMovie and 10.0.8 of FCP X Trial. If I could just locate where the video's I captured are in the Macintosh HD then surely I could use that video. They are large files I assume since they were captured from 1 hour long DV tapes but I just dont see them anywhere on the HD.

  • Cant see the video in Audition

    We recorded a video in MP4 format.  I have imported it into audition.  I see both the audio and video portions  and put them in a multitrack session.  The video does not play along with the audio.  I get a freeze frame or just blank black.???
    Help please

    Hi Pankaj,
    Reload your project and deploy. It will take new messages from Messagepool.
    Try cleaning cache in the Explorer.
    Regards,
    Sridhar

  • Why cant see the video flow by rspan

    on the sw (Catalyst 4500 L3 Switch Software (cat4500-IPBASE-M), Version 12.2(31)SGA2),use the rspan to sniffer the video netflow,but the sniffer cant capture the flow,why.
    the configure like this
    vlan 500 is the rspan vlan.
    on the first 45 sw config:
    monitor session 2 sour interface f0/9(the port conn to polycom terminal)
    monitor session 2 dest remote vlan 500
    on the other 45sw config:
    monitor session 2 sour remote vlan 500
    monitor session 2 dest interface f0/10(the port connect to pc with sniffer)
    pls take me why

    If those video files have the extension .mov, .mp4 or .m4v at the end of the file name, Quicktime should be able to play them. If those video files don't have one of those extensions attached to them, you can add it manually.
    Luckily, there are HUNDREDS of video/media players and Extensions, avaliable for the Mac, many of them FREE. Some of them are...
         Perian
         http://perian.org/
         Quicktime 7.6.6
         http://support.apple.com/kb/DL923
         VLC
         http://www.videolan.org/vlc/index.html
         NicePlayer
         http://www.macupdate.com/app/mac/15136/niceplayer
    And if that still doesn't work, there is a possibility that those video files may be corrupted.

  • Why cant I see the video frames in the timeline view?

    When creating a new video editing  project, I cant see the movie frames in the timeline view. I'm not sure why, but I've been pulling my hair out trying to see what I looks like in the tutorial. Even if I have multiple scenes added, they don't appear in the timeline as video 1,2,3, etc(stacked vertically).  I'm unable to utilize the editing functions of timeline without having the movies clips broken down into individual frames. Please help me understand what Im doing wrong!!

    Thanks for the reply. The Toggle display does stretch out the clips but doesnt still won't show frames. This is all I can see in the timeline view.
    I'm using quicktime movies. I notice on the help images the movie files are AVI. could that be the issue?

  • Hi, my mac has stopped playing some avi files (that used to work). I can see the video. Does anyone know why and what i can do? My version of quicktime is 7.6.9.

    Hi i have avi files saved in iphoto that i used to be able to play through quicktime. However in the last few weeks i cannot play many of these files. I can see the videos and click on them but nothing happens (i have version 7.6.9 of quicktime). Does anyone know why this has happened and what i can do about this?
    Thanks.

    What do you mean by what audio/video formats are involved? These are all files from several digital cameras.
    As previously stated, AVI is a file container. It is somewhat old and its originator, Microsoft, dropped official support of it over a decade ago. However, it remains popular with PC users since almost any valid audio and/or video compression format can be stuffed to the file which synchronizes the content by interleaving the individual audio and video frames. The compression format is the specific manner in which the audio and video data are encoded as it is placed in the AVI container. You can find the compression format by inspecting the file in the Finder "Info" window, or in the "Inspector" window of the QT player (or other media player) if the file can be opened.
    For instance, one popular compression combination would be to place DivX encoded video and MP3 audio in an AVI file container. However, neither DivX nor MP3 is natively supported by the QT player. (Although iTunes will natively support the MP3 audio.) Therefore, people who wish to play such files in the QT 7 Player would normally install either the DivX component or Perian but not both. Either installation will independently play such files in the QT Player, but if both are installed, the file will usually stop working since these two codecs can create a playback conflict.
    However, the AVI container could just as easily contain DV along with DV audio. In this case, the file should play correctly in QT since this compression format is natively supported by the basic component configuration that comes in every current OS installation. Therefore, if such files suddenly stopped playing, this could be an indication that a component has been moved or deleted or that your system or QT embedded structure has become corrupted.

  • Can't see the video's to edit

    Can't see the video's to edit
    when i move the mouse over the video's they should appear in the upper right screen, but i get black screen when i click on the play icon down left, i still get black screen, the only videos i can see should be moved to the editing area,
    why is that and is there a fix for it soon?
    i have screen shots of the problem, but i can't find anywhere here to post them

    am i the only one getting this?
    i can't work with imovie like that its not useable like that at all

  • Cant see the document canvas just grey background

    CANT SEE THE CANVAS PS4 ?just built a new pc and my ps4 (previous hdd ) runs fine ( so the mob and video card seem all good ). I created a new os on a new hdd and installed ps4 everything seems fine but cant see the canvas , can draw on it but just see the grey backround ( i  can see it creating in the layers pallet). Illustrator works fine ..please help

    If all else fails try resetting your preferences as described in the FAQ.
    http://forums.adobe.com/thread/375776?tstart=0
    You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
    This resets all settings in Photoshop to factory defaults.
        A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.

  • HT201322 How come i cant see the hide buttom in my iphone?

    How come i cant see the hide buttom in my iphone?
    i swipe the item again and again, but nothing comes out, just cant see the hide button......the instuction works in itunes, but in iphone

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.

  • Cant see The album artwork!

    Hey i have 30g ipod video 5g. and my problem is,
    i downloaded Itunes7 then i connect my ipod it upgrade my ipod to 1.2 then i restore my ipod , i put the songs i want then i tried to put the artworks of the albums (i have already all of the artworks so i didnt need to download them) but when i try to put the artwork it didnt so i choose the songs right clicked > get info , and put artwork then it put the artworks but when i open my ipod 30gb 5g (video) i cant see the artworks HELP ME PLS...

    ty

  • I cant see protected videos, how do i fix error code 3323?

    I am using linux and I cant see protected video content.  I did everything on this page, and it failed the demo at this end.
    http://helpx.adobe.com/x-productkb/multi/flash-player-11-problems-playing.html
    I get error code: 3323
    corrupt global state store
    sub error code = 1090519053

    Take it to an authorized Apple store in your city for a check.

  • I recently started to have this problem, I can view videos on youtube without any problems, but if I put a link lets say on FB, I cant view the video

    I recently started to have this problem, I can view videos on youtube without any problems, but if I put a link lets say on FB, I cant view the video I can only hear the sound, its like, there even the buttons, only invisible, yet still clickable, so if I manage to find and click the full-screen button the video switch to full-screen and I can view it. this is really annoying as I cant see flash animations and some videos at all.

    You need to find out what type of video it is.  What your describing is what you get when a Video codec (software that allows you to "see" the video) is missing, damaged, or too old for the movie.
    Once you identify what kind of movie it is, then you can update the codec.

  • Cant See my Video library vidoes for iMovie for iPad2

    Cant See my Video library vidoes for new iMovie project for iPad2.  I purposefully recorded video on my ipad to make a project and injust get a blank screen for vidoe library.  Any advice?

    Check your privacy settings.
    On the iPad, click SETTINGS
    then PRIVACY
    then PHOTOS
    Look for iMovie and turn it ON

Maybe you are looking for