Cant see videos in the video foler on N97

i have placed videos on my n97 and at 1st they showed up in the tv and video folder but then the phone stoped showing new videos i added the only way it would work is if i completley reset the phone which i dont want to do every time a put a new video on my phone. the videos will play but i have to go to file manager to play them even when i placed the same videos on the phone which did work at the start. has any 1 had the same problem or has a fix solution

One thing to try is to use Photos to play your videos ( I know it doesn't make a lot of sense, but try it).
Another thing to try is to RENAME the folder called :
\Private\10005A3E
This folder should be in the Mass Memory.
Then re-open Video and TV and wait to see if it finds the videos.
640K Should be enough for everybody
El_Loco Nokia Video Blog

Similar Messages

How can i sync videos to my iphone 5 using Itunes 11. i also tried to convert the videos to mp4 and drag and drop the file in itunes but still i cant see videos in itunes library.

how can i sync videos to my iphone 5 using Itunes 11. i also tried to convert the videos to mp4 and drag and drop the file in itunes but still i cant see videos in itunes library.

Copied from this link.
http://www.apple.com/iphone/specs.html
Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
There are 3rd party utilities available that "rip" content into a compatible format - most include an iPod and/or iPhone format selection. If a video plays in iTunes, iTunes includes an option to convert a selection for iPod/iPhone.

Nothing happens (no downloads,cant see videos or movies...) if I dont move the mouse.

Nothing happens (no downloads,cant see videos or movies...) if I dont move the mouse.

ps when syncing it jumps through steps 1 - 4 real fast, i seem to remeber iphone showing the number of tracks transferring and names, but i see nothing? then it sits on 5 saying "waiting for changes to be applied"

I cant see myself on the screen during video calls...

I cant see myself on the screen during video calls on Windows. What I have to do?

When you are on a video call, you may see a very small picture-in-picture window (thumbnail size). This is the picture of yourself. Click on it and it will be enlarged.

Using premiere cs6 and cant see video in source or program monitor only can hear audio

using premiere cs6 and cant see video in source or program monitor only can hear audio

More information needed for someone to help... please click below and provide the requested information
-Information FAQ http://forums.adobe.com/message/4200840
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/

Cant see Video

Trying to upload movies onto ipod, when i do i get a message that says unexcpected error occured (-69), also when trying to play movies in itunes can hear audio but cant see video..............Help!!!!

haha wow, yea i just tried that and it worked, well i feel stupid now...but now that i can watch the videos is their a way to download dvd videos without having to buy any software?

I installed New version and now I cant see videos but I can still hear them.

I installed New Version and Now I cant see videos but I can still hear them. I have Tried everything to fix the Problem. HELP PLEASE!!!!

Hello
I have a little bit different problem but its close to this.
I have installed the .10 version and now i cant see any Video on youtube. And it does not play any sound. It not opens anything with flash player.
I deinstalled and rebootet the player. I installed the new version again. 10 times....
I also tried an old version. The 2 older versions. No change -.- its really annoying.
can you see the Flash animation at http://www.adobe.com/software/flash/about/ ?
i cant see that animation... but in the help is NOWHERE written what u should do if you cant see that....

Cant see methods of the class

Hello,
I am using NetBeans IDE for development. Problem is that, I cant see the methods of the class. I have imported the required class, I have created its reference as public and static. and I have created its object inside the constructor.
Now, when I type '.' [dot] in front of object created, netBeans displays the list of available methods. But it doesnt show all the methods. What might be the problem? If anything unclear to you, please ask me.
Thanks and regards.

Thanks! Following is the sample code snippet. This class is compiled successfully and also its getting executed very well. I am using this code in my project.
import javax.swing.tree.*;
import javax.swing.*;
import java.io.*;
public class MyTree {
    public static DefaultTreeModel model;
    public static JTree myTree;
    public MyTree() {
        DefaultMutableTreeNode root = new DefaultMutableTreeNode("ROOT");
        model = new DefaultTreeModel(root);
        model.setAsksAllowsChildren(true);
        myTree = new JTree(model);
        myTree.setShowsRootHandles(false);
        JScrollPane jScrollPane3 = new JScrollPane(myTree);
}1) model.setAsksAllowsChildren(true);
No compile time error, No rutime error/exception. But when I type '.' [dot] in front of model, I cant see this method in the list displayed.
2) myTree.setShowsRootHandles(false);
Same case with this also.
i.e. I am using both setAsksAllowsChildren() and setShowsRootHandles() methods, but I cant see them in the dropDownList displayed by typing '.' after corresponding objects i.e model and myTree respectievly.
hope this will clear the problem.

HT1331 cant see disks in the airport extreme setup

cant see disks in the airport extreme "partions" to set up, tried different disks, cables, restart, etc, bottom line the extreme does not see any attached external hard drives, any ideas?
Cheers
Michael

Checklist:
1) The drive must be formatted in Mac OS Extended (Journaled). Unless the documentation with your drive specifically states this fact, the drive is very likely pre-formatted for Windows, which will not work on the AirPort Extreme. Use Disk Utility on your Mac to reformat the drive.
2) Even if the drive is formatted correctly, the USB port on the Extreme is underpowered....so it is often necessary to use a powered USB hub with the Extreme.....even if your hard drive has its own power supply.
3) The hard drive will not "show up" on the desktop the way that drive that is connected directly to the Mac will do. You must click on the AirPort Extreme icon under the SHARED heading in the Finder, then double click the folder representing the drive to mount it on the desktop.

How do you purchase a ringtone? i have enabled 'ringtones' in the 'general' section of itunes preferences and i am connected to the internet but i just cant see where in the itunes store to click once i am at the song i want to turn into a ringtone. help!

how do you purchase a ringtone? i have enabled 'ringtones' in the 'general' section of itunes preferences and i am connected to the internet but i just cant see where in the itunes store to click once i am at the song i want to turn into a ringtone. help!

You don't
You have to create a ringtones. Google will find several ways to do this.
I use Garageband.
How to create custom ringtones in GarageBand 4.1.1
You can also use itunes:
Make free iPhone ringtones in iTunes 10

FCP HD cant see video NO WHERE!!!

Ok here it is last night I imported video in, and now today I went to start working on it and now I cant see nothing, no video at all. I reinstalled my FCP but nothing. When I put clips into my time line all I see is black, but I can hear the sound. I played it throught the camera but nothing. I opened up another project that was working that I looked at the night before to check on somthing, and today I can't see it. If I double click on the clip in the time line it comes up where I can edit it (like speed and what not) and it will play but its slow. Can anybody help me, this is a hot job that has to be done in like 2 days. HELP PLEASE!!! I NEED MY FCP ASAP!!!!!! :'(

First thing to do is select your canvas and press the w key and see if your picture pops up. Or click up the little pulldown and select Image or Image + Wireframe (not just Wireframe).
If that doesn't help, borrowing from the ever popular Shane's Stock answers:
Shane's Stock Answer #8:
If for some reason you can't view your timeline on your external monitor, there are a few things to try:
1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
2) In the FILE menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
4) Go to VIEW->refresh A/V devices
5) Make sure the Log & Capture window is closed
6) Cycle power to the deck or camcorder
7) Shut down the Mac and then restart (couple this with cycling power to the deck or camcorder)
If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section
Patrick

Cant see videos

I had videos that i could see on olver version of quictime .
i upgrade computer to vista and quicktime to PRO ,,,and none of my old videos show up ..

tried that before ,,still cant see the videos ..
i was always able to see them on older version of quicktime ,,when i upgrade , didn't realize that it was going to be like this ..

Cant see messages in the External Definitions

I'm imporing following wsdl into XI. However I cant see messages and seems to be there is some error in wsdl. Would someone help me please?..
<?xml version="1.0" encoding="UTF-8"?>
<wsdl:definitions xmlns:apachesoap="http://xml.apache.org/xml-soap" xmlns:impl="urn:services.soap.a2z.com" xmlns:intf="urn:services.soap.a2z.com" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" targetNamespace="urn:services.soap.a2z.com">
     <wsdl:types>
          <schema targetNamespace="http://xml.apache.org/xml-soap" xmlns="http://www.w3.org/2001/XMLSchema">
               <import namespace="http://schemas.xmlsoap.org/soap/encoding/"/>
               <complexType name="mapItem">
                    <sequence>
                         <element name="key" nillable="true" type="xsd:string"/>
                         <element name="value" nillable="true" type="xsd:string"/>
                    </sequence>
               </complexType>
               <complexType name="Map">
                    <sequence>
                         <element maxOccurs="unbounded" minOccurs="0" name="item" type="apachesoap:mapItem"/>
                    </sequence>
               </complexType>
          </schema>
     </wsdl:types>
     <wsdl:message name="exportGroupResponse">
          <wsdl:part name="exportGroupReturn" type="xsd:string"/>
     </wsdl:message>
     <wsdl:message name="importGroupRequest1">
          <wsdl:part name="in0" type="xsd:string"/>
     </wsdl:message>
     <wsdl:message name="importGroupResponse">
          <wsdl:part name="importGroupReturn" type="xsd:string"/>
     </wsdl:message>
     <wsdl:message name="importGroupResponse1">
          <wsdl:part name="importGroupReturn" type="xsd:string"/>
     </wsdl:message>
     <wsdl:message name="importGroupRequest">
          <wsdl:part name="in0" type="xsd:string"/>
          <wsdl:part name="in1" type="apachesoap:Map"/>
     </wsdl:message>
     <wsdl:message name="loadAdaptersResponse">
          <wsdl:part name="loadAdaptersReturn" type="xsd:string"/>
     </wsdl:message>
     <wsdl:message name="loadAdaptersRequest">
</wsdl:message>
     <wsdl:message name="exportAdapterResponse">
          <wsdl:part name="exportAdapterReturn" type="xsd:string"/>
     </wsdl:message>
     <wsdl:message name="importAdapterRequest1">
          <wsdl:part name="in0" type="xsd:string"/>
     </wsdl:message>
     <wsdl:message name="exportAdapterRequest">
          <wsdl:part name="in0" type="xsd:string"/>
     </wsdl:message>
     <wsdl:message name="importAdapterResponse">
          <wsdl:part name="importAdapterReturn" type="xsd:string"/>
     </wsdl:message>
     <wsdl:message name="exportGroupRequest">
          <wsdl:part name="in0" type="xsd:string"/>
     </wsdl:message>
     <wsdl:message name="importAdapterResponse1">
          <wsdl:part name="importAdapterReturn" type="xsd:string"/>
     </wsdl:message>
     <wsdl:message name="importAdapterRequest">
          <wsdl:part name="in0" type="xsd:string"/>
          <wsdl:part name="in1" type="apachesoap:Map"/>
     </wsdl:message>
     <wsdl:portType name="Adapter">
          <wsdl:operation name="importAdapter" parameterOrder="in0 in1">
               <wsdl:input name="importAdapterRequest" message="impl:importAdapterRequest"/>
               <wsdl:output name="importAdapterResponse" message="impl:importAdapterResponse"/>
          </wsdl:operation>
          <wsdl:operation name="importAdapter" parameterOrder="in0">
               <wsdl:input name="importAdapterRequest1" message="impl:importAdapterRequest1"/>
               <wsdl:output name="importAdapterResponse1" message="impl:importAdapterResponse1"/>
          </wsdl:operation>
          <wsdl:operation name="importGroup" parameterOrder="in0 in1">
               <wsdl:input name="importGroupRequest" message="impl:importGroupRequest"/>
               <wsdl:output name="importGroupResponse" message="impl:importGroupResponse"/>
          </wsdl:operation>
          <wsdl:operation name="importGroup" parameterOrder="in0">
               <wsdl:input name="importGroupRequest1" message="impl:importGroupRequest1"/>
               <wsdl:output name="importGroupResponse1" message="impl:importGroupResponse1"/>
          </wsdl:operation>
          <wsdl:operation name="exportAdapter" parameterOrder="in0">
               <wsdl:input name="exportAdapterRequest" message="impl:exportAdapterRequest"/>
               <wsdl:output name="exportAdapterResponse" message="impl:exportAdapterResponse"/>
          </wsdl:operation>
          <wsdl:operation name="exportGroup" parameterOrder="in0">
               <wsdl:input name="exportGroupRequest" message="impl:exportGroupRequest"/>
               <wsdl:output name="exportGroupResponse" message="impl:exportGroupResponse"/>
          </wsdl:operation>
          <wsdl:operation name="loadAdapters">
               <wsdl:input name="loadAdaptersRequest" message="impl:loadAdaptersRequest"/>
               <wsdl:output name="loadAdaptersResponse" message="impl:loadAdaptersResponse"/>
          </wsdl:operation>
     </wsdl:portType>
     <wsdl:binding name="AdapterServiceSoapBinding" type="impl:Adapter">
          <wsdlsoap:binding style="rpc" transport="http://schemas.xmlsoap.org/soap/http"/>
          <wsdl:operation name="importAdapter">
               <wsdlsoap:operation/>
               <wsdl:input>
                    <wsdlsoap:body use="encoded" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="urn:services.soap.a2z.com"/>
               </wsdl:input>
               <wsdl:output>
                    <wsdlsoap:body use="encoded" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="urn:services.soap.a2z.com"/>
               </wsdl:output>
          </wsdl:operation>
          <wsdl:operation name="importAdapter">
               <wsdlsoap:operation/>
               <wsdl:input>
                    <wsdlsoap:body use="encoded" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="urn:services.soap.a2z.com"/>
               </wsdl:input>
               <wsdl:output>
                    <wsdlsoap:body use="encoded" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="urn:services.soap.a2z.com"/>
               </wsdl:output>
          </wsdl:operation>
          <wsdl:operation name="importGroup">
               <wsdlsoap:operation/>
               <wsdl:input>
                    <wsdlsoap:body use="encoded" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="urn:services.soap.a2z.com"/>
               </wsdl:input>
               <wsdl:output>
                    <wsdlsoap:body use="encoded" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="urn:services.soap.a2z.com"/>
               </wsdl:output>
          </wsdl:operation>
          <wsdl:operation name="importGroup">
               <wsdlsoap:operation/>
               <wsdl:input>
                    <wsdlsoap:body use="encoded" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="urn:services.soap.a2z.com"/>
               </wsdl:input>
               <wsdl:output>
                    <wsdlsoap:body use="encoded" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="urn:services.soap.a2z.com"/>
               </wsdl:output>
          </wsdl:operation>
          <wsdl:operation name="exportAdapter">
               <wsdlsoap:operation/>
               <wsdl:input>
                    <wsdlsoap:body use="encoded" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="urn:services.soap.a2z.com"/>
               </wsdl:input>
               <wsdl:output>
                    <wsdlsoap:body use="encoded" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="urn:services.soap.a2z.com"/>
               </wsdl:output>
          </wsdl:operation>
          <wsdl:operation name="exportGroup">
               <wsdlsoap:operation/>
               <wsdl:input>
                    <wsdlsoap:body use="encoded" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="urn:services.soap.a2z.com"/>
               </wsdl:input>
               <wsdl:output>
                    <wsdlsoap:body use="encoded" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="urn:services.soap.a2z.com"/>
               </wsdl:output>
          </wsdl:operation>
          <wsdl:operation name="loadAdapters">
               <wsdlsoap:operation/>
               <wsdl:input>
                    <wsdlsoap:body use="encoded" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="urn:services.soap.a2z.com"/>
               </wsdl:input>
               <wsdl:output>
                    <wsdlsoap:body use="encoded" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="urn:services.soap.a2z.com"/>
               </wsdl:output>
          </wsdl:operation>
     </wsdl:binding>
     <wsdl:service name="AdapterService">
          <wsdl:port name="AdapterService" binding="impl:AdapterServiceSoapBinding">
               <wsdlsoap:address location="http://vn15:8000/soap/services/AdapterService"/>
          </wsdl:port>
     </wsdl:service>
</wsdl:definitions>

Hi S T,
in the WSDL there occurs the situation that there are in one prtType multiple operations with the same name (e.g. portType "Adapter" contains two definitions for operation with name "importAdapter". Indeed, the original <a href="http://www.w3.org/TR/wsdl">WSDL specification</a> seems to allow this. However, in <a href="http://www.ws-i.org/Profiles/BasicProfile-1.0-2004-04-16.html">WS-I</a> it is forbidden (see R2304).
Therefore, the Integration Builder does not consider this document to be valid WSDL. This is a little bit tragic, as the portType definitions are not considered by the following steps anyway. A simple workaround would be to delete everything behind the message definitions.
Greetings Stephan

Why have Link previews been moved to the bottom of the page? I have a toolbar on my my site and my users cant see it because the link preview is obscuring it...

Well as I can see from other questions asked people are already aware that when you hover over a link the link preview appears at the bottom of the page instead of the status bar.
Other people have said to install https://addons.mozilla.org/firefox/addon/status-4-evar/
Well thats fine for me to do that but what about the users who come to my site and cant see my toolbar at the bottom because the link preview (with a long URL) is obscuring it? I cant tell them to go and install an addon, what bright spark thought of this I find it very disrupting.

As far as I know, [https://addons.mozilla.org/firefox/addon/classicthemerestorer/ the Classic Theme Restorer add-on] is the only way move the Reload button outside the address bar.
# Install [https://addons.mozilla.org/firefox/addon/classicthemerestorer/ Classic Theme Restorer] and restart Firefox when prompted.
# Open the Add-ons Manager (Ctrl+Shift+A; Mac: Command+Shift+A), then the Extensions category.
# Next to Classic Theme Restorer, click the Options button.
# On the Main tab, make sure "Movable back-forward button" and "Hide urlbars stop & reload buttons" are checked. You might also want to check "Combine stop & reload buttons". Close the options window when done.
# Right-click an empty area of the tab bar and choose Customize.
# Drag the Back/Forward, Stop and Reload buttons onto the navigation toolbar.
# Click the Exit Customize button in the lower right corner when done.
That being said, I should point out that you can reload pages in other ways.
* Right-click any tab and choose Reload.
* Right-click an empty area of the page and choose Reload.
* Press F5.
* Press Ctrl+R (Mac: Command+R).

Cant see hebrew on the unix os

hi!
when i am spooling a file on unix and selecting data from a table contains hebrew charecter's data, i get a file full of ??????????? instead of hebrew.
spool try.txt
select 'name - ' || NAME
from names_tb
spool off;
brings out:
name - ????? ????
name - ???? ????????
when i sending the file to the windows os it still with ????????? instead of hebrew.
the thing is that i do have hebrew on the unix server (i can see hebrew, just not from the db).
does any one have a clue what i need to install / change in the server/db in order to see hebrew from the db?

hi, that solved our problem, thanks.
now, we have another problem, I do not know if this is the right place to ask, but i will try:
We moved a critical part of our system (coded in java) to unix from windows.
while running, for some results the processes insert messages to the db (oracle 10g on the same machine). The error message are being taken from a resource file
(txt which contains CODE=message). the error message are in hebrew, but they are being inserted as ??????????? ??????? insted of hebrew to the db.
some facts:
1) We discovered that hebrew that coded directly in the java src "System.out.println("some hebrew words")" is being shoed as ??????????? on our unix too, but
when we insert it to the db we can see it well.
2) When we take the hebrew from the resource file (we can see it well in the unix) we cant understand it in the db.

Cant see videos in the video foler on N97

Similar Messages

Maybe you are looking for