Cant seem to connect to my router to get my WPA
I am hooking up my second pc and I am running my Linksys router on the main PC and a NETGEAR usb adapter on the second. My second pc is finding my router but it needs the WPA passphrase. No problem,right? So I go to my main pc,type in 192.168.1.1 and nothing happens. Just a white page with no errors. I turned off my Mcaffe firewall.....still nothing. This never happened before. Does anyone have any clue as to wht I can do?
First of all check the IP Address you are getting on the computer which is connected to the router via an Ethernet cable.To check the IP Address...Click Start... All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway... IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1 (assuming your router is 192.168.1.1)...
If you get the above mentioned IP Address, Subnet and Gateway then you should ping the Gateway then,
type ping 192.168.1.1(default gateway)
If you get 4 replies then,Adjusting Browser Settings : Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on O.k...Close the IE and re-open it...
Use the default gateway to open the setup page of the router.
Similar Messages
-
Cant seem to connect to internet
since I installed leopard I cant seem to connect to the internet from my wireless an home when trying with safari. I can connect at work through our network and I can at home if I use firefox. It does not make sense to me but the only thing different is leopard.
Anjalina-
One thing to try is to restart your WiFi router and/or Cable Modem. Unplug them for 30 seconds and plug them back in.
It might also be a good idea to reset your iPad's network. Go to Settings-General-Reset-Reset Network Settings. You will probably need to reselect your WiFi router in Settings-General-Network-WiFi.
Fred -
SharePoint store 'Sorry, we cant seem to connect to the SharePoint Store. Try again in a bit'
Hi all,
So we have had SharePoint store working within our SharePoint site for some months now but within the past 3/4 weeks we have been receiving the following message "Sorry, we cant seem to connect to the SharePoint Store. Try again in a bit" We have
tried all the Certificate fixes and checked that the configuration has not changed since it has been working.
Getting rather desperate now so any suggestions are greatly appreciated!Harry,
Are you able to browse office.microsoft.com from your server?
If not please try IPCONFIG /FLUSHDNS
Regards
Amol -
Cant seem to connect to localhost
hi yea,
I set up my site on localhost, but the connect button in the
file panel is
greyed out. I usually connect using ftp direct to my hosting
company without
issue, but my connection for localhost I cannot get it to
become active. I
have set the following, i have done this all before with out
issue just cant
understand why I cant do it now. I am uing AVG anti virus and
the standard
ms firewall.
if any one has any ideas would be grateful
k
local info
sitename: blabla
Local Root E:\testsite\
http address:
http://localhost/testsite/
remote Info:
Access Local/network
remote Folder C:\Inetpub\wwwroot\testlocal\
testing server
server model ASP VBScript
access Local/Network
Testing server folder: C:\Inetpub\wwwroot\testlocal\
url prefix:
http://localhost/testlocal/ok it was down to me not having the driver installed for the
odbc. all is
working, I had thought that the driver would load when I
loaded the mysql
onto my machine any way I did the following.
You are downloading:
mysql-connector-odbc-3.51.12-win32.zip
made it work
regards
k -
I have an old second generation iPod and i can't seem to connect to the app store....Please help! I would really like to download some new things.
Try:
Can't connect to the iTunes Store
Try updating the iPod. Yur 1G can go to 3.1.3 by:
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
https://buy.itunes.apple.com/WebObjects/MZFinance.woa/wa/touchLegacyLandingPage
To more easily find compatible apps:
iOSSearch - search the iTunes store for compatible apps.
Vintapps 3.1.3 - paid app.
Apple Club - filter apps by iOS version. -
I cant seem to connect to the guest network i created on the airport extreme.
i seem to have set the base station up ok, but setting up the guest network has me pulling my hair out, i have set this up on my mac however when i try to connect my ipad to the guest network it accepts the password but all i get is that pinwheel forever spinning and not actually connecting. also when i open airport utiliy and see the base station in the top left corner the button that says connected devices when clicked shows nothing, they are greyed out, however when i click on the base station i do see my ipad and iphone and mac.
Whethere or not the guest network feature will work correctly depends on what type of device is providing your Internet connection.
The Guest Network will work if you have a simple modem.
Unfortunately, most Internet Service Providers furnish a modem/router to their customers.....which will not allow the Guest Network feature to be activated correctly.
If you are not sure whether you have a modem or modem/router.....post back with the make and model number of the device that you call your "modem". -
As per my headline comment, the wi-fi connection (which before IO6) worked fine now problematic, and iPhone in serious danger of flying out of the window..is there an option to get previous IOS back on the phone? I have tried the various "solutions" indicated in the chat forum but nothing helps..any ideas before I lose what little hair I have left?
If, as you suggest, you have iOS 6.0.2 installed in your 3GS, you shouldn't have. That OS is only for the iPhone 5 and Mini iPad.
Try rebooting the router. Any other devices working happily on it are irrelevent. -
this is my first post and not sure if i got it right sorry
http://support.apple.com/kb/TS3221
-
I have tried unistalling and reinstalling follow the steps provided in apple support. Im still getting an error message. Please help.
Assuming here that your error message is being described in your tags on the original post.
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.) -
i recently got an ipod touch 3rd generation, i cannot seem to get it connected to the internet... it connects to the router but cannot seem to get connected to the internet, it seems to connect to the router for a very short while and then suddenly disconnect again, i have tried various solutions but cant seem to solve it, this seems to be a common problem as i have seen many complaints on other forums, many say it may be the dns server . please can any one help?
Tap Settings / General / Reset / Reset Network Settings.
See if that helps.
If not try the iPod touch - Wi-Fi Troubleshooting Assistant. -
My roommates computers can't connect to the router!
Hey, so I've got this Cisco Lynksys E1200 and I've got internet going to it. When I first tried to connect to it my computor automaticaly set it up (giving the network a name, changing it from tehdefault "Cisco67809" to my perfered natwork name, etc.). The problem is that my rommates laptops cant seem to connect to it properly. I know their internet cards work because they have been able to access the internet via other nearby networks on occasion.
On the 2nd computor it skips the usual..."Conecting to network" attempt and instead just says it cant connect, but its so quick to say that it cant connect that it doesn't even seem to be trying, no request for password or anything! Yet we know the computor does try to connect to other networks, so why would it be so quick to deny a connection with our network without even telling us its "trying to connect"? It then gives the options to "diagnose the problem" or "connect to another network" but the diagnose function just says it can't do anything and gives no information about whats going on.
With the 3rd computor it does connect, or so it says "conected" but with "Limited Acess" and absolutly no accesss to actual internet content.
I have tried to fully reset the router multiple times, creating brand new networks, but the same issue continues to happen. I thought it might have decided my computor was the only one allowed to access it because on each reset I was using my computor to set up the network, but when I reset it and tried to have my roomate on computor #2 set up the router and network (aka change it fromdefault Cisco67809 to our own in house network) it did not allow him to set up the network from scratch as I had done twice.
Why is this router rejecting computors and what can be done to get them online? When I log in to the routers settings it says it is set to allow up to 50 users. So far we have my laptop, and Ipad, and an I touch conneted successfully. Why cant we get the two other laptops on it?Hi,
Can you try to clear or remove the Wireless Network Profile from those computers that can't connect? Then, try to reconnect afterwards. Probably, those old profiles stored on other computer have different wireless settings. On the E1200, make sure that MAC address filtering and Parental Control are disabled. Access your router's setup page then go to Wireless > Wireless MAC Filter > then check if it's Disabled. For Parental Control, you can access it via Access Policy tab.
Hope this helps.
If everyone needs to believe in something, I believe I'll have another beer.. -
Won't Connect To Netgear Router
Hi There
I recently bought an iMac 2.0Ghz 17". It's a beauty. However, I can't seem to connect to the internet through my router. The router is a Netgear DG834PN. I've tried the usual things with it - such as installing all software updates and updating the firmware on the router, but no luck. In addition, my previous 1.42Ghz Mac Mini didn't work either, however, a different Mac Mini in the house does seem to connect through the router. My iMac will connect through an ADSL modem so it has been connected to the internet. The Mac Mini that does work I do not believe has the most recent software. Are there any things I might have missed to resolve my problem? It won't connect via Ethernet or Airport, it simply doesn't recognise the network. I've tried adding the Mac Address to the router configuration as well as removing and putting back on Encryption. No luck. Help is greatly needed!
ThanksHi Jack Shepherd!
There was a post in another thread recently where a new owner during initial setup activated the wrong radio button in answer to the question "How do you connect to the Internet?" Was thereafter incapable of manually setting up a connection. Had success with the following:
If you open the Network panel of System Preferences, click on the "Assist me.." button followed by the blue "Assistant..." button, you'll open the Network Setup Assistant which will redo that initial setup and give you a second or third opportunity to make the proper selection for that question. Give it a chance and let us know how it works.
Forget the "Diagnostics..." button at this point, as that's an attempt to "edit" your way out of the mess, and it appears that what might be needed is a fresh start. Best of luck:) -
Urgent - Sorry, we can't seem to connect to the SharePoint Store. Try again in a bit
I am getting this error after run below command in power shell.
Set-SPAppStoreConfiguration -Url http://officeclient.microsoft.com -Enable $true
Can anyone please help me?
Thanks.Hi,
According to your description, my understanding is that when you configure the app store environment, then it occurs the error.
I suggest you can check the points below:
1. Make sure your app domain works fine.
2. Make sure App Management Service and Microsoft SharePoint Foundation Subscription Settings Service is started on your server.
3. Make sure App Management Service Application and Microsoft SharePoint Foundation Subscription Settings Service Application is started.
4. Check the detail error message of ULS log to determine the exact cause of the error.
Also, I suggest you check if you have active the internet access to the Store feature.
Dive into Central Admin->Manage Web Applications,
select the web-application and up in the Ribbon, select Manage Features
now ACTIVATE for internet access to the Store!
Here is a similiar thread for your reference:
https://social.technet.microsoft.com/Forums/office/en-US/dfe32a72-02e7-4fcf-bf30-9a27fd521546/sharepoint-app-store-issue-sorry-we-cant-seem-to-connect-to-the-sharepoint-store-try-again-in-a?forum=sharepointadmin
More information:
SharePoint - Microsoft SharePoint Store
Configure an environment for apps for SharePoint (SharePoint 2013)
Thanks
Best Regards,
Jerry Guo
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Hello, i am just getting started and i cant seem to get connected to wifi
hello, i am just getting started and i cant seem to get connected to wifi
bulitog wrote:
so... if on my wifi network stays at "choose a network" does that mean there is not an open wifi availble?
If there is a list to choose from those are the names of the available wifi networks that are visible to your iPad's wifi. Some of them will be locked, you will need the password to connect to these. Some will be unlocked(open), you will not need a password to connect to these.
If it is your own wifi network then do not leave it open. Set up a name and password in your wifi router. It will show up in your list to choose from. You then provide the password you set in the router when asked for the password. -
Hi all, I've recently updated my ipod touch to the ios 6 and now i cant seem to use it with my itunes
whenever i connect my ipod to itunes, a notification saying that i need a newer version of itunes. However, when i check itunes for software updates, it seems i have the current version of itunes
I am at a lost of what to do as i can no longer sync my ipod touch with my itunes.
Help Pls!
thanksYou might tell us many more things so we don't have to guess and might be able to help.
What computer do you have?
What iTunes are you running now?
What OS X system are you running are your computer now? Or is this a Windows machine?
Let us know a little more info.
Maybe you are looking for
-
Single Transfer Order for Multiple Handling Units
I have been researchig the ability to create a single transfer order for multiple handling units. My assumptions are if it can be done that: 1) A transfer order can have a single source, so if the source document for the handling unit (delivery) is
-
Why do i have to input password on my maaxilbox whenever i access it?
I have an iphone 5, and I'm having problems in accesing my mails. it always asks for password. Can somebody help me please. Thanks!
-
Is there a hack to allow us to search contacts?
Hi! While I really like my iPhone, and am generally happy with it, there are a few features I would really like to see. For example, I own a production company and have almost 500 contacts in my phone. In Address Book on my macs, I'm able to easily s
-
Table for WBS and employee information
Hi, Is there a table where I can find information for which WBS elements an employee are allowed to record hours against? Thanks! BR, Linda
-
Modified start time for songs overlaps on to other songs
If I change the start time of a song in itunes, and I listen to the song on suffle with an ipod touch, other songs that I shuffle start with that same modified start time as the original song. That is, Say I have a song, "Great Song" by "Cool dudes"