Cant seem to insert a "section" page between a chapter page and the first page after that

Just cant seem to do it. It will put it at the END of these 3 or four pages following the chaper heading page but NO between them. Do hope I dont have to rewrite the chapter just becuase it now works better as a section...

Author automatic fills a page. If you want to insert an empty page you'll have to inser a pagebreak. In the menu select Insert > Pagebreak.
Good luck

Similar Messages

In latest version of MF there`s missing button, which was in previous version: between buttons back/forward and the typing bar there used to be little flash, which showed few last pages I have just browsed. How can I restore it?

In latest version of MF there`s missing button, which was in previous version: between buttons back/forward and the typing bar there used to be little flash, which showed few last pages I have just browsed. How can I restore it?

If you mean the drop marker then you can still get the History of the Back and Forward buttons if any by either Left-Click and hold for a second or by Right-Clicking them.
If you still want the drop mark there also then there is this Extension at https://addons.mozilla.org/en-US/firefox/addon/backforward-dropmarker/
Also the abbreviation for Firefox is '''Fx'''

My iPod touch is alternating between a white screen and the Apple startup logo. I can't seem to bring it out of that sequence.

My iPod touch is alternating between a white screen and the apple startup logo. Is it done for?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I did re-set my password and when I click on Install for Mavericks, I still get a box for "administrator password" and it still won't accept my new password. Is there a difference between my Apple ID and the administrator password they're asking for?

I downloaded Mavericks and it won't install. I did re-set my password and when I click on Install for Mavericks, I still get a box for "administrator password" and it still won't accept my new password. Is there a difference between my Apple ID and the administrator password they're asking for? I never had an administrator password-- I just hit enter and have never had a problem before with previous installations. I'm on an iMac, from 2007, running Mt. Lion (version 10.8.5). I've been looking for other's posts who may be having the same problem, but haven't found any. Can anyone help?

Ugh. The 'no password, no work' thing is a recent Apple development. I ran into it on my system and ended up having to do a clean install on a partition I fully erased.
I suppose, if you have the ability to, go online and look up how to burn a bootable DVD image. Download the 10.8.4 image then use the Disk Utility to make a boot image of it. You'll need a dual-layer DVD or a USB drive (or memory stick at least 8GB) If you've got an optical drive, burn the disk, if you've a USB device, use that.
Then get a pocket drive and copy your important files off the system or let Time Machine do a full backup.
When the backup is done, insert the disk and hold down the C key until the machine boots off of the DVD. At the point you get to the start window, go to the menu and choose the Disk Utility.
In the Disk Utility, reformat the drive. You go to the actual DRIVE (not the Macintosh HD, but the root above it that is the actual hard drive device)
I always do this and *partition* it into several volumes, the benefit being, you can store all of your music, documents and importans stuff on that secondary storage volume you make - it will have it's own index and then the first volume is where you put the OS and it will have it's own index as well. That way, if the OS throws a wobbler and you need to reinstall, you don't lose your data.
Depending on the size of your hard drive, it is good to give your OS partition at least 60GB and optimally 100GB, and the rest for storage.
Name your volumes, use the little box sliders to manually size them or put that number in the size window, select for the format, Mac OS Extended (Journaled) and hit Apply and then the Disk Utility will quickly create your new partitions.
Once finished, quit the Utility and it will return you to the OS installer. Select the volume you want to install to and it should start up and install.
Once the installation is done, you'll get the new machine startup then you MUST put in a password for the computer. Once you're in, and to the desktop, don't bother with any Mountain Lion updates, go right to the App Store and get the Mavericks update and let it install the app to your Applicaitons folder, then do that install.
On a side note, there MAY be a way to make a disk image from the Mavericks application and avoid the entire Mountain Lion step.. I honestly do not know, but a bit of hitting the search engines may find out if there is. I think that if you looked for "make Mavericks boot disk or boot image' you may find something.
Good luck!

How can I have the first letter after a sentence ending period automatically capitalize? Can't seem to figure it out...thanks!

How can I have the first letter after a sentence ending period automatically capitalize? Can't seem to figure it out...thanks!

You need to fix capitalization in Pages Preferences > Auto-Correction. When you select this option, you can just keep typing in lower case and the first letter of the next sentence will automatically promote to upper case.

Trying to Hot Sync Visor Pro with Windows 7 (64 bit OS) - getting error: "The connection between your handheld computer and the destktop could not be established. Please check your setup and try again."

Hi.
I read the posting regarding the options on Hotsyncing for Windows 7; however, I have some questions as I have a 64-bit system.
I have a Visor Pro that I'm trying to Sync up with my new laptop which is running Windows 7.
Steps I have taken:
* installed the Visor Palm Desktop 3.0.1 that came with the Visor (which the installation went well)
* The issue arises when I push the "Sync" button on the cradle and the following error message appears "The connection between your handheld computer and the destktop could not be established. Please check your setup and try again."
Since I have a 64-bit OS it appears that I have 2 options: 1) bluetooth or 2) Infrared.
I have to admit I don't know know how to do either of these (how can I tell if this Handspring Visor Pro has bluetooth (which I don't it does)?).
Then how about the Infrared option? I see on the PDA it has a red area that one can "beam" info. Is this the same as Infrared or my 2nd option?
I love my Visor and want to continue using it, but need to backup the valuable info!
Any help with this would be greatly appreciated!
THANKS!!!!!
Post relates to: Visor Pro

Hello lwalbring and welcome to the Palm forums.
Your Visor, as you suspect, does not have Bluetooth, so you must use the IR HotSync option. Since you are using Windows 7 64-bit, I believe that you are going to have to upgrade to Palm Desktop 6.2.2 to make things work from an OS/Driver perspective.
Since you are using such an old device, you are also going to have to download and install the PalmHotSyncSetup Utility from Pimlico. This update turns on support for old Palm OS PDAs in Palm Desktop 6.2.2. Without the update, you won't be able to sync your Visor with Palm Desktop 6.2.2. The software is free and the link is all the way at the bottom of the screen.
Lastly, if your PC doesn't have an IR port on it, you will need to purchase a USB to IR adapter. Some laptops still have IR ports and most desktops don't.
Once you have all the pieces, you'll want to go back to the Windows 7 and Vista HotSync thread again, and follow the directions for setting up and configuring IR HotSyncs.
Alan G

I would like to sync Notes between my MacBook Air and the IPhone and/or IPad. I used to tick a box in Itunes (info), but for some reason it is no longer there. How do I go about doing the sync?

I would like to sync Notes between my MacBook Air and the IPhone and/or IPad. I used to tick a box in Itunes (info), but for some reason it is no longer there. How do I go about doing the sync?

The only way to sync Notes is through a mail server. If you don't want to use iCloud, you'll have to use some other mail account, or run your own mail server under OS X Server. The latter is a job for advanced users only.

I want to create an app. Can you tell me the difference between iOS developer program and the mac developer program?

I want to create an app. Can you tell me the difference between iOS developer program and the mac developer program?
Is the difference the device you're creating your app on, or for?

iOS Developer Program is only for those who wish to develop iDevice apps. Mac program is for those only developing Mac applications. If you wish to do both, then you need to enroll in both programs.

Inconsistency between a document field and the prof. segment number

Hi,
While processing an invoice in one company code for vendor# XXX with the PO# AAAA line# 10, it is showing below error message while posting. Please advise on the below error or fix the issue to post the invoice in to SAP. The using screen T-code is miro.
Inconsistency between a document field and the prof. segment number
*Message no. KE396
*Diagnosis
A line item was assigned to a profitability segment (number 0008629207) which has the value 0000101000 for characteristic Profit Center. The original document (FI document, sales order, internal order, etc.), however, contains 0000102020 in this field. It is therefore inconsistent with the profitability segment found.
System response
The characteristics in Profitability Analysis (CO-PA) must have the same characteristic values as the original document. For example, you cannot assign a sales order to a different customer or product than the one contained in the original sales order. If you wish to fill the characteristics with different contents, you must change the original fields.
Procedure
Enter the correct characteristic values on the CO-PA assignment screen. The system will automatically assign a corresponding profitability segment number. If it is not possible to enter values in some of these fields, delete the entire assignment to a profitability segment number and then enter it again.
As a rule, you should first enter the fields in the original sender document and then make the assignment to a profitability segment.
What should I do for the above pl ?
Regards
Murali

Hi,
While doing PGR at VL32N, we are facing this error. Can someone assist.
Regards,
Aruna

Difference between SAP/APO/DP and the SAP/CRM solution for forecasting

Hi,
Can you please help me identifying the main differences between SAP/APO/DP and the SAP/CRM solution for forecasting? Advantages and disadvantages?
Thanks a lot

Hi LCD777,
Forecasting at DP & CRM are altogether at different entities. CRM involves webbased data transfer mechanism tool whereas DP is database/livecache driven tool.
In CRM, you dont get optimised solution of forecasting out of it whereas in DP you can get as much as
optimised solution & flexibility as per your requirements.
DP is majorly a forecasting tool where in huge statistical method functionalities are embedded in
whereas CRM is majorly a transactional tool wherein it involves gathering of forecast data and executing it.
Typically, CRM will be integrated with DP containing GATP environment & ECC so that DP will plan for forecast data, ECC system drives sales order data & GATP calls for availability check and finally
the forecast execution& transactions will be controlled by CRM
Regards
R. Senthil Mareeswaran.

I want Firefox to stay on the SAME tab instead of going to the FIRST tab after saving a page

Several months ago FireFox (7) started going to the FIRST tab after saving and other actions.
This is extremely irritating as I usually have several windows with numerous tabs open and its very time consuming to find the tab I was on.
In fact, I have to open tabs in a new window prior to saving the page if I need info on that page for the file name as it's impossible to go anywhere but the first tab while at the prompt for the page name.
I hope it's not supposed to do that and greatly appreciate help to fix this.
Thanks, Christine

The photo app puts files in date/time order and ignores their names.
You can look for another app that may honor file names (sorry, I don't know any to recommend) or you can find a program that alters your file properties. If all the files have properties that read the same date and time, then it defaults to alphabetical order

I inserted an SD card into my macbook pro and it didnt prompt me that a device was inserted so I took it out. Now the camera isnt showing anything on it. How do I fix this?

I inserted an SD card into my macbook pro and it didnt prompt me that a device was inserted so I took it out. Now the camera isnt showing anything on it. How do I fix this?

AFAIK cameras offer their own built-in format utility for inserted SD cards. You should use that. Otherwise, refer to the manual that came with your camera to determine precisely how your SD cards need to be formatted to work properly. Personally, I'd suggest Partition Scheme: MBR, and Filesystem: FAT32.
Try to limit the number of formats you perform on the SD cards, though, as you're reducing their lifespan. I believe formatting causes re-writes to a portion of the SD card that has fewer read/write cycles than the rest of the card as a whole.

Difference between SAP Software Kernel and the files in Kernel Directory

27. What is the difference between SAP Software Kernel and the files in Kernel Directory

well... the OS kernel is for the... "OS" and the SAP Kernel is for.... "SAP"
A kernel is the core of any application, basically is a set of programs and parameters that tell the system how to behave.
Regards
Juan

What is the difference between Macs Voice Over and the text to talk feature

what is the difference between Macs Voice Over and the text to talk feature

Voice Over doesn't need someone to type in the text first. Voice Over works with specific screen displayed information so that a blind person can know where his/her cursor is or what is being displayed. Although it is an application of text to talk it's more than the text to talk feature.

I cant seem to get email receipts function to send an email to the submitter?

The form is embedded in a web page and includes a mandatory email field but nothing gets sent through...

Hi;
I received your shared form. The setup is not complete on the Email Receipts tab:
There is an "!" icon on both the tab, and below the "To" field showing that "No email field has been selected to send submission receipts to.":
If you select the "Your email address?" field from that drop down then receipts will be sent. You might also want to change the "From" field to be your email address rather than the generic FormsCentral email.
Thanks,
Josh

Cant seem to insert a "section" page between a chapter page and the first page after that

Similar Messages

Maybe you are looking for