Cant select the group tree

Morning All
I have a crystal report in which I have multiple groups and subreports in the group footers.
I am not able to select the group tree coz i dont see the group name.
It's a very complex report and the group tree is very much important.
Please help.
Thanks in advance
-AG

Hi Sourashree
Answers to your questions:
1. What is the version of Crystal Reports that you are using? CRXIR2
2. Do you have BusienssObjects Enterprise installed? Yes we have.
3. What's the patch level of the enterprise and CR? both are SP2.
Is it happenibng from Crystal Reports Designer Stand Alone applicationor from Infoview? We do use infoview but I am getting this issue in the Crystal Reports Designer itself.
It's going critical now.
Please help!!
Thanks in advance.
-AG

Similar Messages

Hide the 'group tree' in crystal reports 2008

Hey Guys,
Please help me out.
I need to hide the group tree which automatically shoots on the crystal report after execution.
This is what i need to see. Only the report data (After report execution) i do not need to see the group tree under the tab 'main report' which appears on the left had side of the report.
I know that in the previous version there was an option which would hide the group tree option under File>Report Option> uncheck Group tree.
But there is no option here in CR 2008.
Is there a code i need to insert somewhere in the report??
Regards,
Harvino

Hi Chinmay,
Thanks for your quick reply, I was late on the reply because I had a load of other things to do. Sorry for that....
I am aware that we can click the toggle panel to remove the group tree.
But a user wants to hide the group tree on 1st run,,,, that is causing the problem.....
I cant seem to find an option we can disable group tree for the user, so that he may not view the group tree..
Harvin

Report as an Inquiry tool - Controlling the Group Tree

Users would like to be able to use this report as an inquiry tool... having trouble with displaying only relevant data (or at least highlighting the appropriate/relevant data on the left hand window pane - aka the Group Tree).
Perhaps the report needs to be reconfigured as a subreport?
Here is the issue, any hints or suggestions are welcome!
thanks
CR Xi --version --> 11.0.0.2134
Report Groups on Last Name
Transaction detail; totaling an amount field (logic works to suppress if total of all transactions is not equal to zero) -- Report is reporting on zero balance records by last name --
Selection expert;
Sum ({transactions.Amount},{MASTER.HEAD_L_NAME}) >= $0.009 (group selection)
{MASTER.UNIT_ID} = "" (record selection)
Of the 10,000 records returned (unit id = blank), 200 records have a sum of zero in the amount fields (the sum of all transactions by last name) u2013 this all works fine
Is there a method to control what the users see on the group tree? What it is displaying on the left are the Group records (10,000) by last name who have a blank unit id in the master file... drilling down on one of the 200 transactions where the record meets both criteria works fine...but the other 8,800 records don't meet the detail/transaction criteria, so there is nothing to display and hence the drill down makes no sense when used as a query - The correct records are shown on the report - that is, if the users printed the report, they would get records which meet both criteria...
Can only records show on the left side when they meet both the group (id = blank) and detail (transactions summed = 0) selection criteria?
Or can they at least these that meet both criteria be highlighted in some way?

try using Group selection (select expert->group) along with record selection.
--Kuldeep

Help! I recently upgraded to OS 10.9.4 from 10.6.8, and now when I want to send an email to a group in my contacts I am no longer able to select the group as a whole. I have to select each address individually. This can't be right.

Help! I recently upgraded to OS 10.9.4 from 10.6.8, and now when I want to send an email to a group in my contacts I am no longer able to select the group as a whole. I have to select each address individually. This can't be right. With 10.6.8 I used to be able to double click on the name of the group and they would all be selected. I've also noticed that my address book is now called "contacts." Thanks in advance for your help.

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
     computer and after the chime press and hold down the OPTION key until the boot manager
     screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
     Reinstall the 10.9.4 update: OS X Mavericks 10.9.4 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
     Reinstall the 10.9.4 update: OS X Mavericks 10.9.4 Update (Combo).

CRVS2010 Beta - How do you hide the Group Tree for Visual Studio 2010

Would anyone know how to hide the group tree in the Crystal Reports viewer for Visual Studio 2010. I have tried
DisplayGroupTree="False" and found the property doesn't exist in the new version for VS 2010. I have search in the designer options and found nothing. Note this report is for ASP.net.
Thanks
Dave.
Subject modified as per the sticky post at the top of this forum; [Crystal Reports for Visual Studio 2010 Beta - read before posting|Crystal Reports for Visual Studio 2010 Beta - read before posting;
Edited by: Ludek Uher on Sep 15, 2010 8:55 AM

A simple search using the search box in the top right corner of this web page would have come up with the following KBase as one of the 1st - if not the 1st hit (for once, we beat Google ).
[1183704 - How to display or hide the Group Tree in CrystalReportViewer control through code in Crystal Reports 2008|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333133383333333733303334%7D.do]
- Ludek

Hide the group tree while previewing the report

Post Author: sanjay_usa1
CA Forum: General
Hello! Everyone i would like to hide the group tree which comes in the report while previewing it when i preview the report each time the group tree in the left hand side appears everytime i know i can hide and unhide it from the toolbar in the upperside but i dont want it to dispaly the group tree while previewing it as default , Is it possible to do that.
Pls Help out it will be a great help
Regards,Sanjay

Post Author: yangster
CA Forum: General
Under file -> optionsuncheck the display group tree that will remove the group tree from displaying by default

Report Header is hided when navigating in the Group Tree

Hello there,
I have an issue when navigating in CR reports by using the Group Tree. When I chose an entry in the tree, the Report header is hided. Please advise what needs to be changed in order to keep the report header during Group Tree navigation
thanks

Report Header is only visible on the first page of the report. If you click on an entry that is on the first page of the report, is the report header visible then?
If you want the information in the report header visible on every page, consider moving it to a page header.

Windows 2008 r2 Server: Cant update the group belonging

Hello,
I have a Windows 7 client computer which is administered by a Windows 2008 Server.
When I try to change the local grants of the user account in that client computer, it appears to me the following message:
"Cant update the group belonging for NameDomain\user"
As result I cant change local grants for the user. I cant change his status from administrator to user of that machine.
Can anybody tell me how can I solve this issue?
Thanks in advance
Regards

Hi,
Thanks for your feedback. Did you mean that the issue exists after you removed
DameWare tools?
Please make sure that you have more than one administrator account on your computer, or you can't change it to a standard account since Windows requires at least one administrator account on a computer.
If you have another administrator account, you can try to use it to change the user’s account type.
Best regards,
Susie

Can't install OSX Mountain Lion, on the disk selection screen i cant select the Macintosh HD to install OSX giving a message (This disk cannot be used to start up your computer).

Can't install OSX Mountain Lion, on the disk selection screen i cant select the Macintosh HD to install OSX giving a message (This disk cannot be used to start up your computer).

Read
https://discussions.apple.com/message/15659267#15659267

Can't install OSX Mountain Lion, on the disk selection screen i cant select the Macintosh HD to install OSX giving a message (This disk cannot be used to start up your computer).only have one disk to select and my partition map scheme is GUID partition

just bough OSX Mountain Lion, my laptop operating with v10.6.8. Can't install OSX Mountain Lion, on the disk selection screen i cant select the Macintosh HD to install OSX giving a message (This disk cannot be used to start up your computer).only have one disk to select and my partition map scheme is GUID partition table. 24.44gb disk available.

Verify your computer can run Mountain Lion:
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Open Disk Utility and verify the drive is partitioned using GUID and formatted Mac OS Extended, Journaled. If it is then do this:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Now try installing Mountain Lion.

Cant select the paper ICC profile in the applications page saet-up or print

Cant select the paper ICC profile in the applications page set-up or printer box.
I loaded a new paper profile into what I thought was the proper places(s) and it showed up in some applications but not in another. Does this mean the application is at fault? Can anyone tell me where the profiles are supposed to be installed?
Thank you in advance.

This is from "Ask Chris' forum:
Also, I suspect you are confusing paper types with color profiles. The paper types you see in the driver will not change: http://www.inkjetart.com/news/archive/IJN_01-26-06.html#3

Resizing the group tree width

Hi,
I was wondering , if there is a way to re-size the width for the group tree in DHTML viewer . When a report is rendered, and if it has a group , then there is a pan that's shown in the left side of the report . Is there a way to set the width of it like a parameter file or SDK , to make it 5% or some width that I want , rather than the default.
Thanks in advance .

Take a look at the setToolPanelWidth and setToolPanelWidthUnit methods from the CrystalReportViewer class.

Formatting the Group Tree?

Post Author: paulold
CA Forum: General
I create grouped reports in Crystal all the time. (I am now using CRXI.) One little pet peeve I have is how Crystal presents the Group Tree when I am using a number field for my grouping. For example, we have order numbers like 10128276 and if I want to group my report on the order number, the group tree will do so, but the order numbers will look like this: 10,128,276.00. This looks like a mistake to my endusers. Sure, I can live with it, but I would love to hear of a way to format what appears in the Group Tree. Why doesn't the formatting of the group header get carried over into the group tree? Thanks! [email protected]

Post Author: SKodidine
CA Forum: General
Checkout this KBase article. If you do not want commas then change the suggested formula to totext(,0,"",""). Pay particular attention to the drawback mentioned at the end of the article.
Formatting the group tree to display numeric values without decimals

HT202631 How do you create a appleid but i cant select the none option and i don't have anything to pay with.

How do you create a appleid but i cant select the none option and i don't have anything to pay with.

Hello, did you mean create an Apple ID without any credit card info?
If that I can help. Just go to iTunes and choose a "Free" apps to download. After that, it will pop up with "sign in with existing Apple ID" or "Create a New Apple ID". Click create a new apple id. through this process, you will see a "none" choice in payment method while registering the Apple ID.

How to remove suppressed items in the group tree from the crystal report print preview screen

I am removing items in report using group selection formula. Although the removed items are not available in the report, they are still available in the group navigation tree on the left pane. Is there a way to overcome this ?

Hi All,
How can i use the below group selection code in record selection.
TotalQuantity := sum({ICIVAL.QUANTITY},{ICIVAL.ITEMNO});
TotalCost := sum({ICIVAL.TRANSCOST},{ICIVAL.ITEMNO});
iIncludeQty := TONUMBER({?INCLUDEQTY});
iIncludeCost := TONUMBER({?INCLUDECOST});
bIncludeQty := FALSE;
bIncludeCost := FALSE;
SELECT iIncludeQty
    CASE 0:
        bIncludeQty := TRUE
    CASE 1:
        If TotalQuantity > 0 THEN
            bIncludeQty := TRUE
    CASE 2:
        If TotalQuantity = 0 Then
            bIncludeQty := TRUE
    CASE 3:
        If TotalQuantity < 0 THEN
            bIncludeQty := TRUE
    CASE 4:
        If TotalQuantity <> 0 THEN
            bIncludeQty := TRUE
SELECT iIncludeCost
    CASE 0:
        bIncludeCost := TRUE
    CASE 1:
        If TotalCost > 0 THEN
            bIncludeCost := TRUE
    CASE 2:
        If TotalCost = 0 Then
            bIncludeCost := TRUE
    CASE 3:
        If TotalCost < 0 THEN
            bIncludeCost := TRUE
    CASE 4:
        If TotalCost <> 0 THEN
            bIncludeCost := TRUE
bIncludeQty AND bIncludeCost

Cant select the group tree

Similar Messages

Maybe you are looking for