Cant send mail (well not all mail)

Hi all,
After the disapoinment of icards no longer being around i downloaded some stationery for mail.
upon trying to send it i get cannot send message using dot mac.
When watching the mail activity bar it goes upt about 50kbs then down to 0.
I have tried one line txt emails and they send fine to my gmail but cant send the stationery ones!
i have deleted my account from mail and then added it again still cant.
My ipod touch can send mail using the same wifi network, so cant be my ISP or my network.
i have tried smtp.me.com and smtp.mac.com with and without SSL etc etc to no avail.
im running a g5 with 10.5 on it fully updated and using mobile me, (dot mac sound so much better!!)
So any ideas would be helpful
ben

Hi kzo631, and a warm welcome to the forums!
ATT has so many servers & plans, which one are you using & the Port #s?
Is the Incoming Mail Server pop.att.yahoo.com, and the Outgoing Mail Server smtp.att.yahoo.com.

Similar Messages

  • Still Cant send mail? HELP PLEASE!

    I am connected to the server.
    POP3 and SMTP look corrected.
    Connection doctor says I am connected to the server.
    I can receive mail.
    but
    I CANT SEND ANYTHING.
    Please help can someone tell me why post is not going!

    even i am facing the same issue i am using email account which is on exchange server 2008 and able to recieve emails perfectly fine but, issue is when i try to send email thru my Mac mail client ( mail 3.0 [930.3]) it gives error. I checked this connection doctor as well didnt got any error messAGE authentication was done . But still cant send mail out checked for ports as well all are open on router firewall but still no luck can anyone help me on this. Thanks

  • Cant send mails with mountain lion

    cant send mails with mountain lion, but i can recive....

    Hi, i am having the same problem. this is what i have noticed.
    I have 2 x imac's and 2 x macbook air's
    i upgraded the 2 macbook air's and 1 of the imac's to Mountain Lion, all these have problems acessing sites that require you to login .
    the one remaining imac is still running lion and works perfect.
    i am using a dlink router with DD-WRT firmware, i tested teathering from my iphone and i can log into websites fine using the newly upgraded mac's.
    It's not a wireless issue as my imac is using an ethernet connection.
    is there a compatibility issue with some routers.

  • C6-01- Cant send mail via yahoo mail

    I have set up my yahoo mail account on my Nokia C6-01. I receive mails as they should do. But I Cant send mail. When I compose a mail and try to send it it just stays in outbox. I have set the mailbox settings correctly. While my gmail account works fine to send mails. Mails are sent instantly. Is anyone else going thru this trouble? And I Cant set up the Ovi mail mailbox. It keeps telling me "unable to sign in" How shall I solve this problem?
    In Love With My C6-01:Now running on Nokia Belle!
    Solved!
    Go to Solution.

    Well, it works fine if you use Nokia messaging service. If you use the standard mailbox it has been failing. I have some reservations about Nokia messaging service and thats why I dont want to use it.
    In Love With My C6-01:Now running on Nokia Belle!

  • Can receive, but cant send mail

    Any ideas? I can receive but cant send mail. It says..
    The SMTP server “mailhost.zen.co.uk” rejected the password for user
    Have mail version 4.4
    Many thanks

    Hi,
    I would double check your settings and port numbers.
    Incoming Mail (pop3) server mailhost.zen.co.uk and port for Incoming mail (POP3) is 995
    Outgoing Mail (smtp) server mailhost.zen.co.uk and port for Outgoing mail (SMTP) is 587

    Also make sure under SMTP that the outgoing server requires as secure connection (SSL) box is checked as well as the incoming POP3 (SSL) box.
    Can you say if this is a recent issue or one that has been there since setup?

  • Cant send mail w 2WIRE

    Cant send mail using gateway 2WiRE w/ ATT as ISP

    Hi kzo631, and a warm welcome to the forums!
    ATT has so many servers & plans, which one are you using & the Port #s?
    Is the Incoming Mail Server pop.att.yahoo.com, and the Outgoing Mail Server smtp.att.yahoo.com.

  • Cant send mail within certain wifi networks!

    Hi.
    I have my own wifi network at home which works fine.
    When i come round to my mums house, she has an orange (phone company in UK) wireless router.
    It all works fine and im on websites and downloading mail etc but i just cant send it from mail.
    It says the selected server is unavailable.
    As soon as im out of this wifi network its fine...
    Any ideas what this could be?
    Thanks, Ben

    Some ISPs, that provide their own email service to its customers, block traffic that is destined for port 25 of mail servers if it is not their mail server. So, if you don't have the same ISP has mum, that's likely why you are not getting through. You might try specifying port 465 or port 587 as your outgoing mail port, most likely with SSL enabled, but I would start by asking your email provider what should your smtp server settings be when you are on a network that blocks port 25 traffic to anyone's mail server but their own. Also ask whether those same settings would work when you are on their network, that way you wouldn't have to make two sets of outgoing mail servers for your mail account.

  • I cant send mail from my through mail

    I have an email account with virgin, brought it through and i recieve mail but i am not able to send mail, not sure why?

    Isn't mail.virgin.net the name of the Incoming Server -- the incoming server, which you say is working is set up at Mail Preferences/Accounts/Account Information as to name of the server, Username, and password, along with entries in Mail Preferences/Accounts/Advanced for Port select for the Incoming.
    However, if that is working for you, you must have it correct. For the Outgoing server, isn't the proper name for Virgin services smtp.virgin.net? In Mail Preferences/Accounts/Account Information, click on the arrows beside the name of the SMTP, and choose Edit Server List. Remove all, or all but one of any references to the smtp.virgin.net. Enter anew, or with the remaining server, click on the Advanced Tab there, and choose Use Custom Ports. Then enter the Custom Port to be Port 25, and set the Authentication to None, and have no entries in Username or Password. This is consistent with those specs I can online saying the SMTP does not require Authentication.
    Also click Use this server only. Now if the smtp.virgin.net server is online, it should work.
    Ernie

  • Cant send mail from i phone 3s, with a tiscali account

    I can no longer send mail from my tiscali mail account on my i phone 3s, or my ipad without going through web mail account. please can anyone advise

    Isn't mail.virgin.net the name of the Incoming Server -- the incoming server, which you say is working is set up at Mail Preferences/Accounts/Account Information as to name of the server, Username, and password, along with entries in Mail Preferences/Accounts/Advanced for Port select for the Incoming.
    However, if that is working for you, you must have it correct. For the Outgoing server, isn't the proper name for Virgin services smtp.virgin.net? In Mail Preferences/Accounts/Account Information, click on the arrows beside the name of the SMTP, and choose Edit Server List. Remove all, or all but one of any references to the smtp.virgin.net. Enter anew, or with the remaining server, click on the Advanced Tab there, and choose Use Custom Ports. Then enter the Custom Port to be Port 25, and set the Authentication to None, and have no entries in Username or Password. This is consistent with those specs I can online saying the SMTP does not require Authentication.
    Also click Use this server only. Now if the smtp.virgin.net server is online, it should work.
    Ernie

  • Cant send mail using hotspot

    Hi.  I have started using my iPhone 4S as a WiFi hotspot for my MBP when on the road.  Mail collects from all my accounts ok but I cant send any mails from my MBP thru the Hotspot connection.  I dont get any error message, just the spinning icon next to the sent mailbox and no info in the activity window.  Any ideas welcome.  thanks

    Are you sending mail using a Broadband provider account?
    For instance, Virgin Media Mail can only be send through the Virgin Media Sever when you are actually connected to your Virgin Media line (at home)
    An attempt to send mail using the outgoiong server smtp.virgin.com will be blocked if it isn't coming down one of their own lines.
    To cure it, you'll need to add a different smtp server to our mail account that can be used while youo're out an about. Normally this would be the smtp server that your phone company gives you i.e smtp.orange.co.uk or whatever.

  • Cant send mail but can recieve

    have an iphone 3g and just today its stopped sending emails. it comes up with error message
    user name or password for smtp.(email [email protected] is incorrect??
    is the server just down or have i stuffed something up. like i said still receive but cant send from phone

    I began having the same issue today. Several people have posted on the MS livemail forum with this issue today with no response. I was able to work around (found it in the troubleshooting section here) by going settings > mail > livemail account > outgoing mail server > at&t smtp server > on. This is only a work around. There is clearly something that changed today. Another thread talked about not sending when on wifi and using this work around but even with wifi off it will not send without this work around change.

  • Cant send mail since updating 3GS to iOS4

    Hi
    I updated my phone yesterday with the new iOS4 update and whilst my AOL email is working perfectly, my work email which is Microsoft Exchange does not allow me to send mail. It says cannot connect to server. Yet I can receive mail into the inbox. I have deleted and readded the account several times, restored my phone and it is still not working. Please help! I work in HR and need to be able to access my mail at all times incase something happens

    Hi, Elgjazz.
    Thank you for visiting Apple Support Communities. 
    Here are a couple articles that will help you troubleshoot this issue. 
    iOS: Unable to send or receive email
    http://support.apple.com/kb/ts3899
    iCloud: Troubleshooting iCloud Mail
    http://support.apple.com/kb/TS4002
    iOS: Configuring additional outgoing mail servers
    http://support.apple.com/kb/HT4519
    Cheers,
    Jason H. 

  • Cant send mail with Entourage

    I had this working perfectly, sending mails using 2 different accounts (one was not with my ISP). Then I found myself offline and after a restart im back on but can only receive mail?
    I can still send using a mobile broadband dongle.

    Not much to go on there...
    For one, did this work in the past but has now stopped working? or did it never work?
    For two, the error message usually gives a better idea of why the message couldn't be sent... what else does it say?
    Third.. what server are you trying to use? Are you trying to send via Yahoo's servers? and have you verified that your ISP isn't blocking? (some ISPs require you to send all mail through their mail servers to avoid spambot problems on their network - have you tried sending the mail through your ISP's mail server?)
    Is it just Yahoo mail that's failing? or all mail?

  • Cant send mail out.

    Hi-
    I'm running an Xserve ( new intel build) , using OS X server 10.5.5.
    I can send mail from one user to another from within the domain. I can also receive email form the outside world.
    however, I cant email out.
    SMTP log file reports the following
    "Oct 17 19:25:08 BHW1-Server postfix/qmgr[42665]: warning: connect to transport smtp: Connection refused
    Oct 17 19:25:15 BHW1-Server postfix/smtpd[42715]: warning: 189.71.93.145: hostname 18971093145.user.veloxzone.com.br verification failed: nodename nor servname provided, or not known
    Oct 17 19:25:48 BHW1-Server postfix/qmgr[42746]: warning: connect to transport smtp: Connection refused"
    The ip changes based on whom I try to email to ( I assume I'm getting bounced by someone's mail relay or servers)
    I have rebooted, restarted various services and am fairly convinced this is a configuration problem somewhere-
    any mail guru's help out?

    How is your server connected to the world? Are you relaying your mail server trough your ISP? Or is the domain you internally use, known on the internet? From the mail you try to send, is the info included in its envelope correct?
    As I assume that you use an internal FQDN not publicly know, this is how I resolved a similar situation:
    1. the server must be using the correct relay server
    2. per (local) user the email address must be set to an allowed (publicly known) email address.

  • Cant send mail..very annoying

    I have 2 e-mail accounts set up on my mac that I synced over to my touch but neither will send e-mail. One is a Virgin [UK] account and one my work e-mail. Any suggestions? They both work fine on my mac just not the touch and nothing has been changed.cheers

    still cant send from my work e-mail account which is annoying as this is why I bought the thing!
    It tries to send with the bar at the bottom going half way but then says "connection to the server was lost" so irritating!

Maybe you are looking for

  • Excise duties moving to credit due

    After posting excise invoice in J1iex the excise duties are moved to credit due, kindly find the below attachment for your reference. Also GR reference tab is missing for this. When we checked at table level the posting year of excise document is upd

  • What type of data type would I use for this situation?

    I have a class which connects to Oracle, but each connection may be to a different database. Each database has it's own user name and password. I'd like to pass one key value and then the class would get the user name and password and url from that b

  • How to upload a word doc

    Dear friends, i wolud like to upload a word doc which is consists of images and text into SAP data base or into a folder which is created in a local drive in hard disk. And at the same time how to retrive or download that file into hard drive. pls he

  • Select Time at Validate and Process Transformation File

    Hi, Experts, We have SAP BPC 10 NW. We need to load data (not DELTA) from BW using a batch process every night and we don't want to need to make any change when the current month changes. We need to filter the current month and the month before autom

  • Trackpad will not scroll - Settings?

    I have a late 2008 MacBook. Under the last OS (Lion) and the current OS (Mountain Lion), my trackpad registers all gestures EXCEPT scrolling. After updating, the MacBook loaded an alternate account. Scrolling worked on that account! When I switched b