Cant send on my SMTP server

I use Pair.com for my email and their SMTP server authenticates you to send when you check your POP3 or IMAP email. My new Droid 2 cannot authenticate. The identical settings on my Droid works fine. (Two phone, two numbers.)
Is there a difference between the two email clients? Why are they behaving differently?

I had the same issue on my Droid X. I could receive but not send email. I wrote to pair.com tech support and got the following response:
Try the following outgoing mail settings below first:
Outgoing Mail Server: relay.pair.com
Outgoing Port Number: 2525 or 465 (SSL on)
Authentication Type: None
If you are unable to turn off outgoing authentication on your Droid X mail
client, try the alternative option below:
Outgoing Mail Server: masilma.pair.com
Outgoing Port Number: 465 (SSL on)
Authentication Type: TLS
Outgoing Username: (mailbox address)
Outgoing Password: (mailbox password)
The second option finally solved the issue for me.

Similar Messages

Authentication Error while Sending Email from SMTP server.

Authentication Error while Sending Email from SMTP server. Can receive emails but cannot send emails from this account.

no email account was setup on the phone unless it was issued by your company.
gmail is required but no server address ports to enter.
my gmail account was setup before i took delivery of the phone but could have been done when phone was activated.
i added cox pop3 email and had to manually enter both pop3 and smtp servers with both boxes checked on both servers.
i doubt if it's a verizon issue.

SMICM error while sending mail using SMTP server

Hi All,
We are not able send mails using SMTP server.
We have made every settings necessary in SCOT, SO16 , SMTP service is activated, default domain is maintained etc
Only things which seems to be wrong is in SMICM trace file.
[Thr 13] *** ERROR => NiBufIConnect: non-buffered connect pending after 5000ms (hdl 29;10.26.24.44:1090) [nibuf.cpp 4608]
[Thr 13] *** WARNING => Connection request from (0/1/0) to host: 10.26.24.44, service: 1090 failed (NIECONN_REFUSED)
[icxxconn_mt.c 2321]
This error is getting repeated in it.
BUt I am not sure why it it trying to hit 10.26.24.44, as we dont have any server by this ip. The ip is only not resolvable from the server.
1 more thing, at OS level, following parameter is maintained in profile :
icm/server_port_1 = PROT=SMTP,PORT=25000,TIMEOUT=180
But in SCOT, under SMTP node PORT is given as 25.
Kindly let me know what going wrong here?
Thanks

also getting error as follows
Error: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Net.Mail.SmtpException: The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1
Authentication Required. Learn more at
at System.Net.Mail.MailCommand.CheckResponse(SmtpStatusCode statusCode, String response)
at System.Net.Mail.MailCommand.Send(SmtpConnection conn, Byte[] command, String from)
at System.Net.Mail.SmtpTransport.SendMail(MailAddress sender, MailAddressCollection recipients, String deliveryNotify, SmtpFailedRecipientException& exception)
at System.Net.Mail.SmtpClient.Send(MailMessage message)
at ST_c121e07caaa94c21bb1355d4f753112f.vbproj.ScriptMain.Main()
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args, CultureInfo culture)
at Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTATaskScriptingEngine.ExecuteScript()

I send mail via SMTP server with Hebrew text, and I get it gibberish on my iphone

I send mail via SMTP server with Hebrew text, and I get it gibberish on my iphone

What mail program from what kind of computer are you sending your email? It sounds like an encoding problem that would have to be solved on the sending end. If you want, send me an example of the kind of email which arrives as gibberish on your iphone (tom at bluesky dot org).

Cant send command to SMTP Host

Hi,
I am sending an attachment using javamail concept.The attachement is working well if i give the host name as gmail,but when i change the smtp_host_name,it gives the error like Cant send command to SMTP Host.The error comes when it executes the following command Transport.send(mimemessage)........can any one find me a solution for this............................
Regards,
suba

Hi,
Thanks ..............I have gone through those FAQ'S and I got the output.....................
Regards,
suba

Can someone help me send mail using SMTP server?

I am having the most frustrating problem with SMTP outgoing email account. I use GoDaddy's Webmail (smtp.secureserver.net) and I receive all my emails through Apple Mail but I cannot send any. I haven't been able to for about two weeks now, aside from 3 or 4 fleeting windows of time when I could. Almost all of the time I try to send my emails, an error message says my outgoing account is offline. I've been on the phone with GoDaddy's tech support three times this week and did everything we could think of, which include these steps:
-Force Quit Apple Mail --> Restart Computer
-Change Default Ports to a specific one and uncheck "Use Secure Sockets Layer (SSL)"
-Check "Use only this server"
-Delete account completely from Apple Mail and re-load (which I had to go into Time Machine to recover messages, and lots a bunch in the process ugh!)
Nothing works! I depend on this email for my business, and I rely heavily on Apple Mail for this account. All of my other email accounts that I pull through Mail work fine, but of course they are not SMTP outgoing. Please help...I feel like I've tried everything and nothing works permanently.

At this point there are 2 possible causes to your problem:
Apple Mail
Connectivity between you and the SMTP server
I can't help with (1) as I use Thunderbird as my mail client (the biggest advantage being I can take my mail files and move between different versions of Mac OS X). If you suspect that your problem is due to Apple Mail, then using another email client to send a test message will prove the point. If it works, then the problem lies with Apple Mail and somebody else will have to chip in. If it still fails, then there may be connectivity issue between you and the mail server.
If you google "telnet smtp test" (without the quotes), you will find many articles showing you how to test an SMTP connection using telnet. Don't be put off by the fact that many of the articles assume you are running Windows. The only Mac bit you need to know is that telnet is a command line utility accessed via Terminal. The rest is generic.
Telnet will allow you to interact with the mail server a line at a time and show you exactly what and where the problem is. If you get an unexpected response from the server, go back to GoDaddy and show them the output. If you don't get any response at all (i.e. "telnet smtpout.secureserver.net 25" just hangs), then take it up with your ISP as you are simply not getting through to the server.
Good luck.

Can't send email through SMTP server

As some others have reported, I recently started having problems sending emails (most of the time) through my regular smtp server (receiving is not an issue). Once in a while it does go out, but most of the time I get a message "Can't send message using the server smtp.XXXX.com". I know it's not the smtp server as I can go out with my browser and use webmail and it sends fine, using the same server.
It only affects this one main email account - my other accounts seem fine (including gmail, mac, and another pop accounts), at least so far.
It is extremely frustrating - saw a whole lot of ideas for fixing it (changing ports, etc.), but don't want to mess up all the accounts that are working. I'm a long time Mac user, but not a real techie.

I know it's not the smtp server as I can go out with my browser
and use webmail and it sends fine, using the same server.
This is wrong. Whether you can send via webmail has nothing to do with whether you can send using a standard mail client such as Mail. The outgoing server that ends up delivering the message may be the same in both cases, but the outgoing server you communicate with is not. Actually, when sending via webmail you don’t even use SMTP to communicate with the outgoing server.
There are circumstances under which you may not be able to send using a standard mail client such as Mail no matter what you do (e.g. because the ports needed for SMTP are blocked by the ISP at the location you’re trying to send from), whereas webmail works fine — and may be your only option in those cases.
If it works sometimes, that means your account settings are probably correct, but you cannot discard that there is a problem with the outgoing (SMTP) server that Mail has to communicate with, even if sending via webmail works fine.
<hr>
That said, go to Apple Menu > System Preferences > Network, choose Network Port Configurations from the Show popup menu, and make sure that the configuration used to connect to Internet appears at the top of the list. Leave checked (enabled) only the port configuration needed to connect to Internet and Built-in Ethernet (in that order if not the same), uncheck (disable) the rest of network port configurations and see whether that helps — if it doesn’t, turn ON again the ones you want enabled.
Try using a different method to connect to Internet, if possible, or connecting the computer to Internet as directly as possible (i.e. bypassing any routers that might be present, using an ethernet cable instead of wireless, etc.), or shutting down both the computer and the router/modem used to connect to Internet, restarting, and see whether that makes a difference.
Mail keeps information about outgoing (SMTP) servers in a separate list independently of the mail accounts themselves. The account settings just associate one of the available outgoing servers with each account. Orphaned or dangling outgoing server entries (i.e. not associated with any account) sometimes cause weird sending problems.
Go to Mail > Preferences > Accounts > Account Information > Outgoing Mail Server (SMTP), choose Edit Server List from the popup menu, and delete any servers that shouldn’t be there — the Edit Server List panel shows the account each outgoing server is associated with.
If the problem persists and you have more than one mail account, try moving the account that has the problem to the top of the list in Preferences > Accounts.

How to send emails when smtp server stops working?

How do i send e mails when my smtp server has stopped working?

How can users send email messages if the Exchange Server goes offline?
Is there a system that can be setup in case of server failure?
Thanks in advance.
Check out the HA options with Exchange 2013
https://technet.microsoft.com/en-us/library/dd638137(v=exchg.150).aspx
High availability and site resilience
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

I have 2 email accounts the second one i have only recently added, i have sent one email from my second account but i cant seem to send anymore, it says "cant send email with selected server" i am still able to send emails from my first account. Any ideas

I have 2 email accounts, the second i only just recently added, i was able to send an email from this account after i added the account but am not able to send anymore emails. It says "unable to send email with selected server" there are no other servers to choose from. please help! TIA

Hi apmichael,
If you are having issues sending email from one of your mail accounts on your iPhone, you may find the following article helpful:
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Regards,
- Brenden

Sending Mail through SMTP server

Hi
I am trying to sent the mails through smtp server but but my smtp server is not reponding, I tried to delete the account & recreated the accounts & the smtp server but unable to do that, but creating the same mail account & same smtp server works in different laptop. can any one guide me how to correct the problem & repair it.
Thanks in advance for the support.

There are a couple of things you might check:
make sure that you have the server name entered correctly (for example, stmp.gmail.com)
make sure that if you have to override the default port that you have
make sure that if SSL is required to connect that you've this option ticked, and
make sure that if you need to provide a user name and password to access the server that you have.
Other than that, that's about all that I can think of.
Clinton

Mail won't send. dotMac SMTP server Issue?

Using 10.4.8 and Mail. Mail won't send. Says to try a different server, but I don't have anything other than dotMac. Others are having the same problem. Anyone know a solution?

Who is your Internet Service Provider? What is your current SMTP setting?

Can't send e-mail- smtp server offline or disappeared

Hi!
I've had issues sending e-mail from my @mac address for about a week. I can send from iCloud on the web but not from iPad, iPhone or MacBook.
Sometimes the server is offline, sometimes just not there at all - the error msg gives the smtp info and says I can't connect. Connection Doctor says everything is fine.
I've tried….
- turning off iCloud on all devices and re-booting
- removing a second e-mail account
- manually changing smtp settings
Receiving mail is fine.
can anyone help??!

Hey ruthccraig1,
Welcome to Apple Support Communities.
It sounds like there’s an issue sending emails from your iOS and Mac devices. The article linked below provides troubleshooting tips, like reconfiguring a hardware firewall, which can help you resolve the issue sending emails from your devices.
Mail (Yosemite): If you can’t send messages
Ciao,
-Jason

Outlook 2011 quit sending email - iCloud SMTP server changed?

Anybody else notice that SMTP parameters to connect to Apple's iCloud mail servers have changed?
I use Outlook 2011 for Mac for my email client under 10.6.8. and today I noticed that my outgoing mail from Outlook on my iCloud mail account was hanging up and timing out connecting to Apple's SMTP servers. Had not seen this problem before. The same messages were sent successfully through Mail.app. What was the difference?
It turns out that the outgoing server name used by Outlook - previously smtp.me.com - needed to be changed to smtp.mail.me.com and I also needed to use the alternate port 587. I had used the previous settings successfully as recently as last week but it wasn't working this morning, so the change must have been only in the last few days.
Hope this helps somebody else who's frustrated trying to keep their Outlook email functioning on Apple's servers.

Hi paulfrom34,
Welcome to the Apple Support Communities!
I understand that you are unable to send email on your Mac unless you use your iCloud account. To troubleshoot issues with sending email, please read over and work through the suggested steps located in the attached article.
If you can’t send or receive email on your Mac - Apple Support
Best regards,
Joe

RTMT cant send alerts to exchange server

HI,
I have setup alerts in the RTMT and configured it with the exchange. I have tested the connectivity and it does connect to the exchange server IP. I can see the alerts showing up as sent to my email address but still I dont get any.
I have spoken to the exchange guy who said he added all the IP address (for our CUCM 8.5 nodes) to be allowed to send/relay emails. have done searches on the senders IP address (CM Nodes) and the senders email ([email protected]) but couldnt locate anything.
By checking some other topics, i came across that we have to configure the DNS on the CUCM CLI. I have checked through the GUI and the DNS is not setup.
can someone please advise
1. Do we need to configure a DHCP before configuring a DNS
2. we can only configure the DNS via the CLI as
set network dns {primary | secondary} ip-address
3. will this cause any network disconnection.
4. or do we have to reboot the cluster/ any services.
and the main question is even if we configure the DNS on the CUCM will it then be able to send the alerts from the RTMT to the exchange server.
Much appretaited for any help.
A

Yes JP you are right, the Dchannel alert is there but sometimes the D channel is working fine, like last time, we had the first B channel of the first gateway out of service and the rest had connected calls. so every new call was hiting that first channel and was gettting engaged tone.
the gateway cli doesnt really tell you about which channel out and in when you run
ncc-r_hq-mgcp01#show isdn service
PRI Channel Statistics:
%Q.931 is backhauled to CCM MANAGER 0x0003 on DSL 0. Layer 3 output may not apply
ISDN Se0/0/0:15, Channel [1-31]
Configured Isdn Interface (dsl) 0
   Channel State (0=Idle 1=Proposed 2=Busy 3=Reserved 4=Restart 5=Maint_Pend)
    Channel : 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
    State   : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
   Service State (0=Inservice 1=Maint 2=Outofservice 8=MaintPend 9=OOSPend)
    Channel : 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
    State   : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
but the RTMT showed that that one was out

Cant send mail using selected server

I havent been able to send mail using my normal 587port with SSL selected.
Can someone help me???

A .Mac account has a 10 MB message size limit for incoming and sent messages and attachments must be encoded before being sent which increases the size of the pre-encoded attachment by 50% or so. A single 6 MB attachment can be over 10MB due to the encoding process.

Cant send on my SMTP server

Similar Messages

Maybe you are looking for