Cant send or receive mms

i cant send or receive mms on my blackerry z10 pre paid to optus , can anyone help ...

Hello 03mitch
Welcome to BlackBerry Support Forums
You should give a call your Service provider Optus to know about the issue , they can look at your service account if you're missing something .
So , please call your Network service provider .
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Similar Messages

  • Cant Send or receive MMS messages??

    I just bought a Blackberry Pearl 8100 from a friends, and when I first had it, I tried to send a MMS message (a picture) to someone,a nd it told me something like "Multimedia message service not detected" and that I would only be able to save the message as a draft.. I have AT&T, and called them, but for some reason, they told me that you CANT send pictures on the Blackberry ??
    Oh, and then I did the "Wipe Handheld" Thing, so I could clear everything, and now I dont even have the option of sending an MMS message anymore. I know I have it in my plan, I just bought unlimited messaging for SMS and MMS right before I got the Blackberry. Halp please?

    Start by looking for the MMS service books on the BlackBerry.  This can be found by going under options, advanced options, and then service books.  Check the size of the picture being sent.  If that fails I would talk to the service provider to confirm that the voice feature is applied and confirm the limitations for MMS messages.

  • HT1349 I cannot send and receive mms

    I cant send and receive mms

    As long as Cellular data is enabled, MMS is a carrier issue.
    Contact the carrier.

  • HT201210 i cant send or received picturer from my iphone 3gs

    need help why i cant send or receive picture from my iphne

    Are you using MMS to send/receive?  If so:
    Have you checked Settings > Messages > MMS Messaging is set to "On"?
    Have you checked that your cellular carrier allows MMS and you are signed up for it (may cost extra)?

  • I cant send or receive emails from my second email account on my iphone. i have uploaded i0S7 how can i fix this problem?

    i cant send or receive emails from my second email account on my iphone. i have loaded i0S7. i was told that it doesnt like two emails with the same address so i changed from a hotmail to a yahoo account and still not working. can anyone tell me whats going on? thank you

    Contact the email provider to troubleshoot the issue.
    hotmama4278 wrote:
    i was told that it doesnt like two emails with the same address
    That's a load of manure.

  • Since my update to 4.4.4 I can no longer send or receive MMS messages.  What gives?????

    Since the latest update to 4.4.4 I can no longer send or receive MMS messages.  What gives????

        DrEvey,
    Let's get your MMS messages sending and receiving again!  Are you receiving an error message? Has this been occuring everywhere? Is your cellular data turned on? Please share some details so we can further assist.
    TrevorC_VZW
    Follow us on Twitter @VZWSupport

  • Can i send and receive mms messages in my ipad ?

    how i can send and receive mms messages in my ipad?

    You should be able to do this through the iMessage app if the other person is connected through an apple device If not however there are plenty of apps on the app store that you would be able to use to send pics as long as the other user has a smart phone (does not have to be apple)... for example WhatsApp, Kik, Skype etc Hope that this helps!

  • How can i get my iphone on straight talk to send and receive mms?

    I have an iPhone 4 on straight talks network. I have never been able to send or receive mms messages to anyone other than a device with iMessage.  How can I get it to work?  I dont want to change to a Galaxy or any other kind of phone, but I will if this doesnt get figured out.  Straight talk says its an issue with Apple products. Please help!!

    Hey Jstugelmeyer,
    First, I would go through these three steps:
    Restart your device.
    Update to the latest iOS Software.
    If you are trying to send a message to multiple recipients and you type in each contact manually instead of using the contacts list, make sure you tap return instead of space to separate each one.
    Then, if you still can't send or receive MMS messages:
    To send and receive MMS messages on your iPhone, verify that your wireless carrier supports MMS2.
    Ensure that MMS Messaging is turned on in Settings > Messages.
    Verify that your phone is able to access cellular data.
    Some carriers allow you to edit your APN (Access Point Name), which may prevent MMS from working.
    If you are roaming outside your calling area, make sure you have Data Roaming turned on in Settings > General > Cellular to send or receive MMS content.
    While on a phone call, you will be unable to send or receive MMS messages when using an EDGE, GPRS, or any CDMA cellular data network. After the phone call ends, you will receive any incoming messages. If you tried to send an MMS message, you may need to send it again.
    If the issue persists and your wireless carrier has confirmed that your wireless account is provisioned2 for MMS, restore the iPhone.
    via: iOS: Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Welcome to Apple Support Communities!
    Best,
    Delgadoh

  • TS2755 cant send or receive photos iphone 3

    I am having trouble sending and receiving photos from my iphone

    ARe you provisioned by your carrier to send and receive MMS - if not contact them.
    if you are make sure MMS is turn on in settings.

  • Won't send or receive MMS

    My new iPhone 4 fails to send or receive MMS messages. Is this a hardware problem or a carrier problem? (Also, the battery life is awful. Barely lasts a day. But it seems that's another story...). This is my first iPhone. So far, a bit of a disappointment.

    Thanks for your replies. For some reason, it's sorted itself out and I can send MMSs. However, now the email has stopped working and won't receive any new messages! Beginning to think the iPhone 4, or alt least OS 4.1 is a bit of a dud.

  • HT4623 Hi I have updated my 4s and some of my texts send but never gets to the other person, also I now cant send or receive photos ?

    Hi I have updated my 4s and some of my texts send but never get to other person and also I cant send or receive photos any more

    Go into settings -> general -> reset -> reset network settings.
    7.0.2 was a security fix for the lock screen. The Imessage fix will be coming with 7.0.3

  • Cannot send or receive MMS messages!!

    I cannot send or receive MMS messages on my BT mobile HTC S620.  Also I keep getting the BT Set-up screen yet it won't proceed past the first step of four!  I have re-set this handset back to factory settings and updated the software via computer/download, however, I cannot find a solution to get my MMS messages! Help please?  (By the way wireless, emails and SMS messages work fine.)
    Solved!
    Go to Solution.

    Sounds like something has gone wrong with regards to the MMS settings and looks like you'll need to re-enter them.
    The settings I found for it as follows:
    Access point name: mobile.bt.uk
    Username: user
    Password: btmms
    Authentication: Normal
    Data bearer: GPRS
    Gateway IP address: 212.183.137.012 or 62.239.21.123
    Session mode: Permanent
    URL address: http://mms.bt.com/servlets/mms or http://mmsc.btmms.co.uk:8002
    We have also been told that the following settings may work for a corporate BT Mobile: APN: btmobile.bt.com , username:bt , password:bt, port:8799 , IP address:212.183.137.12
    My Motto:
    Going to kill my HomeHub 2 very soon.

  • TS3276 cant send or receive mail from my @mac.co.uk account

    cant send or receive mail from my @mac.co.uk account

    If the settings are correct?, Then delete the account and start over. You may also try to restart your phone by holding the home and off button down till the apple symbol comes up.

  • Iphone 5s not sending or receiving mms

    I Just got 2 new iphone 5s and neither one will send or receive MMS messages. Verizon says they are looking into it. Is anyone else having this issue?

    Sending MMS is a carrier feature.  You'll have to deal with Verizon.

  • Send and receive MMS

    hi
    I am a final year student. I want to send and receive MMS between two clients. This for my final year project can anyone help me, if possible immediately.
    bye
    ss.

    The antennae or radios in the Prime are configured differently than most flagship type smartphones and even different still from basic phones.  It comes down to difference of hardware.

Maybe you are looking for

  • Best practice for deleting data

    I need to clear several years' worth of data from our environment.  In addition, we have a number of categories that need to be cleared as well.  Is there any need to actually clear the data prior to making making the dimension changes?  Or is it eno

  • [AS2 from Amazon] Could not find suitable party

    Dear all, I try to configure an AS2 EDI connection between Amazon and our PI system. Amazon offers a test tool where IDs are mentioned: Example: Sender AS2 ID     ASxxx17 Receiver AS2 ID  AmazonProd I created a Party with Identifier: Agency: Seeburge

  • JColorChooser : "Swatches"-tab's recent-panel not showing recent color

    Hello all, in JColorChooser on "Swatches" tab we have one panel named "recent" and another named "Preview". Problem 1. After i close my Color-chooser-dialog and reopen again , Preview-panel shows the last selected ie recently selected color BUT recen

  • SUM - SPAM/SAINT 7.3 Update using SQL2012

    Hi, I installed a SAP NW BW 7.3 in Windows Server 2012 / SQL 2012 and I'm trying to update SPAM/SAINT via SUM, but this errors occurs: 1 ETQ359 RFC Login to: System="BWD", AsHost="atlas" Nr="00", GwHost="atlas", GwService="sapgw00" 2 ETQ232 RFC Login

  • Adobe Standard 10.1.1 - Error : 0xc0000005 - Crashes when closing

    System Config: Windows 7 64bit We have an issue when running Adobe Standard 10.1.1, if we close the software down before 13seconds there is no error however if we leave it open longer than 13 seconds we get the following error reported with in the ev