Cant start my kde

xsetroot: unable to open display ''
xset: unable to open display ""
xset: unable to open display ""
xset: unable to open display ""
xsetroot: unable to open display ''
startkde: Starting up...
startkde: Running kpersonalizer...
kwin: cannot connect to X server
kpersonalizer: cannot connect to X server
kpersonalizer: cannot connect to X server
kpersonalizer: cannot connect to X server
kpersonalizer: cannot connect to X server
kpersonalizer: cannot connect to X server
kpersonalizer: cannot connect to X server
kpersonalizer: cannot connect to X server
kpersonalizer: cannot connect to X server
kpersonalizer: cannot connect to X server
kpersonalizer: cannot connect to X server
kpersonalizer: cannot connect to X server
kpersonalizer: cannot connect to X server
kpersonalizer: cannot connect to X server
kpersonalizer: cannot connect to X server
kpersonalizer: cannot connect to X server
kpersonalizer: cannot connect to X server
kpersonalizer: cannot connect to X server
kpersonalizer: cannot connect to X server
kpersonalizer: cannot connect to X server
kpersonalizer: cannot connect to X server
and, my xfce4 works well

How can i config .Xauthority?
And I think the problem is "unable to open display ".
I've installed serval wms, but only xfce4 can work, while the others are not able to open display.

Similar Messages

Webcam NX Ultra - Hardware Cant Start Code 10

I have the Webcam NX Ultra - after making several attempts to install i continue to get the error message Hardware Cant Start Code 10.
Does this mean my webcam is defective or is that a software problem?
I am runing Win XP

i have already done that, but the generated script would not work
anyways, there is an update now, i have edited xorg.conf and set the driver for my nvidia card to be "vesa".
ofcourse the graphics card does not work properly (nvidia-settings cant do anything here unless i am running xorg via the nvidia driver).
now here is the part that is driving me crazy: i am running xorg perfectly (with KDE or GNOME) when i am root. but i cannot do it when i am in my own user although i have added my user to the video group :S
i would like a way to run my graphics card perfectly and in my user not as root

When I plug in my Ipod touch to my computer a warning appears "The program cant start because MSVCR80.dll is missing." I can not access my Itunes library. Also, an "error 7 Windows error 126" appears as well. Any ideas?

When I plug in my Ipod Touch to my computer I can not access my Itunes library. The following message appears "The program cant start because MSVCR80.dll is missing." Also, another message appears as well - "Error 7 Windows error 126" as well as APSDaemon.exe.
I have NO IDEA what the heck to do.
Any ideas?
Thanks!

Issues installing iTunes or QuickTime for Windows
solving MSVCR80
iTunes 11.1.4 for Windows: Unable to install or open
Troubleshooting issues with iTunes for Windows updates

Me and my family have 2 game cetre accounts on one email, but when we try to log into one, we log into the other. Also, we cant start a new apple id

Me and my family have 2 game cetre accounts on one email, but when we try to log into one, we log into the other. Also, we cant start a new apple id

Drrhythm2 wrote:
What's the best solution for this? I
Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer.

How do i resolve this....the program cant start because MSVC.dll is missing from your computer.ive uninstaled and reinstaled i tunes, still getting this message

how do i resolve this....the program cant start because MSVC.dll is missing from your computer.ive uninstaled and reinstaled i tunes, still getting this message

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components; this won't normally affect its library, but that should be backed up anyway.
(99150)

Hi i am having a problem with itunes on this computer so i had to remove it and tryed to download it again and now every time the computer comes on i get a notification which says "the program cant start because MSVCR80.dll is missing from your computer

hi i am having a problem with itunes on this computer every time the computer comes on i get a notification which says"the program cant start because MSVCR80.dll is missing from your computer,try reinstalling the program to fix this problem" but when i click on ok it just keeps popping up 4-5 time and then gone.and i cant dopwnload the itunes again.help

You need to work through the user tip: https://discussions.apple.com/docs/DOC-6562

I cannot load the latest version of Itunes on my Toshiba PC with Windows 7 Home Premium. Tried to re-install. Dead in the water. Windows error 126. Cant start becasue MSVCR80.dll is missing from my computer

I cannot load the latest version of Itunes on my Toshiba PC with Windows 7 Home Premium. Tried to re-install. Dead in the water. Windows error 126. Cant start becasue MSVCR80.dll is missing from my computer

You may have to follow the slightly more detailed steps in whichever of these two applies to you.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Rebooting into safe mode may be needed to delete any folder the instructions say you should remove. You may also find this Microsoft Fixit helps to remove stubborn components. It has taken some people several attempts to completely clean iTunes and supporting software before they have been able to successfully reinstall it.
tt2
Message was edited by: turingtest2

Trying to install the newest version of itunes on my pc and am getting "program cant start because msvcr80.dll is missing from your computer" reinstalling doesnt work. and then it says error 7 (windows error 126)

trying to install the newest version of itunes on my pc and am getting "program cant start because msvcr80.dll is missing from your computer" reinstalling doesnt work. and then it says error 7 (windows error 126). Any help would be appreciated. Using Windows 7 enterprise on an hp Z600

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

I cant start my computer any more

I have a HP pavilion laptop. I wake up yesterday and found that Microsoft apdated my windows 8 to windows 8.1 over night. the computer told me to restart and I did. Now i cant start my computer any more. I rceiveid this mensage:
BOOT DEVICE NOT FOUND
PLEASE ISTALL AN OPERATING SYSTEM ON YOUR HARD DISK>
HARD DISK (3FO)
F2 SYSTEM DIAGNOSTICS
FOR MORE INFORMATION< PLEAS VISIT www.hp.com\go\techcenter\startup
I rum all the system diagnostics and all are ok.
Can some one help me on this matter?

Hi mardressa,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that your computer did an auto update to Windows 8.1 during the evening and you saw a prompt to restart your computer in the morning. You restarted the computer, but received the error "BOOT DEVICE NOT FOUND" PLEASE INSTALL AN OPERATING SYSTEM ON YOUR HARD DISK>HARD DISK (3FO).
You stated you ran the diagnostics but no problems were found.
Here is a link to a document to assist with this issue. Resolve Boot Device not Found Error Message
Here are links to help with an HP recovery if necessary. Performing an HP System Recovery (Windows 8).
During the recovery process, you will receive a prompt to backup your personal files. If you have not done a backup yet, I suggest you do one now to prevent data loss. Restoring Files that were Backed Up Using HP Recovery Manager (Windows 8).
Here is another link to help redo the Windows 8.1 update.Updating Windows 8 to 8.1
Please let me know the outcome.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

After wakeup from pc sleep I cant start any application

I upgraded archlinux to newes kernel, pacman, software and after upgrade when I put my laptop to sleep mode(covering lid), when it wakes up, I cant start any application. Allways I have to mannualy restart pc and then it works.
I have fluxbox.
What can be the problem, how to solve? THANKS

Go into Settings>General>Restrictions and see if you have restrictions turned on for deleting apps.

I cant start Itunes..

I cant start Itunes..."Error 7 (windows error 14001)"
What I have to do?

Just in case the component being referenced is not part of iTunes but is rather part of one of the other related programs, it might be worth trying a complete uninstall/reinstall of iTunes and related componentry, as per the following troubleshooting document:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

S.M.A.R.T error i cant start my Macbook Air

i cant start my Macbook Air

Backup all of your files immediately if not sooner!
Your hard drive is failing.
You can either have the failing drive replaced ( if older Mac and no extended AppleCare, this won't be too expensive to replace) or purchase an external hard drive.
You need, at least one external hard drive to both partition for a data backup drive and to install and boot/run OS X Mavericks simultaneously.
If you have an older iMac that has FireWire 800 connection on the back, purchase an external FW800 so that your iMac can run OS X Mavericks from that drive as fast as it can.
If your iMac is even older and only has FireWire 400 most newer FW drives can run at the slower FW speed.
This is still faster than a USB 2.0 style external hard drive.
Purchase Mac compatible external hard drives from here.
http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
You may, at some point, consider purchasing a second external hard drive for using just as a data backup drive.
Good Luck!,

Upgraded libx*** and now i cant start firefox [Solved]

Well i did a pacman -Syu , noticed lots of x libs upgrading and then rebooted , now i cant start firefox , this is the terminal output
The program 'firefox-bin' received an X Window System error.
This probably reflects a bug in the program.
The error was 'BadRequest (invalid request code or no such operation)'.
(Details: serial 1033 error_code 1 request_code 154 minor_code 2)
(Note to programmers: normally, X errors are reported asynchronously;
that is, you will receive the error a while after causing it.
To debug your program, run it with the --sync command line
option to change this behavior. You can then get a meaningful
backtrace from your debugger if you break on the gdk_x_error() function.)
Any ideas how to fix this ??

Same problem here for every applications... Posted a thread here too http://bbs.archlinux.org/viewtopic.php?t=21050, didn't see yours.

I had airplaine mode on for 2 weeks cant start My iPad again

I cant start My IPad its blocked, had airplaine mode on for two weeks and now it says that its no securitycopy done and that I have to do certain things but I cant because IPad dont answer, I can not either open or close, so I cant change from Airplaine mode to Wifi. What can I do?

Hello Fionafri
Check out the Wi-Fi troubleshooting article, if that does not resolve the issue then restore the iPad and test it.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
iTunes: Restoring iOS software
http://support.apple.com/kb/HT1414
Thanks for using Apple Support Communities.
Regards,
-Norm G.

I have Photoshop Elements 10 and cant start my Epson Scanner in the profesjonell way only automatic.

I cant start my Photoshop Elements 10 to use my Epson Scanner in the profesjonell way only automatic.

Welcome to the forum.
Unfortunately, this is the Premiere Elements Forum (Video editing software).
I will Move your post to the very active Photoshop Elements Forum, where you will get quick assistance. Your link and any e-mail subscriptions will follow.
Good luck,
Hunt
[Move to Photoshop Elements Forum]

Cant start my kde

Similar Messages

Maybe you are looking for