Cant start premire cs6 trial, need help
I downloaded and installed the cs6 family trial on my 2g hp notebook with windows 7 and I cant start or find the program.
Hi
Premiere Pro CS6 is a 64 Bit Application , Is the computer on which Premiere is installed is it 32 bit Or 64 Bit ?
You might also face the same concern with After Effects as both the application require 64 bit OS architecture.
Hope It Helps
Thanks
Similar Messages
-
i bought my iphone secondhand, and the previous owner didnt deltete his find my iphone account, so when i restored it i know cant access my phone, i need help as i have no way of getting intouch with the previous owner whatsoever :/ help!
Welcome to the Apple community.
Unfortunately, you cannot do very much with your phone unless you get assistance from the previous owner, they should either provide you with the password to unlock it or remove their account from the phone entirely remotely through iCloud.com > Find My Phone. -
I started downloading CS6 trial but was interupted. Now I don't have CS6 but Adobe thinks I do
if you follow all 7 steps, you can dl the trial here: http://prodesigntools.com/adobe-cs6-direct-download-links.html
-
I have bought a film, and now I cannot load it. Loading is completed, then I see a message about processing (?), and then the loading starts again. I need help:(
Thank you so much, Brennen!!!!!! I have downloaded this film after rebooting iPad and after deleting film and re-loading it!!!!!
-
HT201210 I did all these steps and i still cant restore it!! Need Help!!
I did all these steps and i still cant restore it!! Need Help!!
Delete and redownload them if doing so is free in your country.
(83692) -
Cant execute transaction /atl/kp19- need help
hi to everyone
i need help with some problem in tr /atl/kp19
i get this error message when i trying to execute the tr:
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_FILE_OPEN_MODE', was not
caught and
therefore caused a runtime error.
The reason for the exception is:
When accessing the file "c:\zzz1.txt", the system recognized that this file is
not open. Therefore, the file cannot be accessed.
there is the field for "file patch"
why it need this patch???
and way he cant open it ???
it just need some url for building this file-?? or i need soomthing else?
thank
yossi:-)Hi:
First of all, you'll need to flash the drive on real DOS mode. To do that, you'll have to create a startup disk and then you can flash it.
Here's the link for you to download the bootdisk utility:
http://www.bootdisk.com/bootdisk.htm (Download Windows 98 SE)
Second, I recommend you to install the drive as a secondary master and any other device as slave.
Hope that helps.
Edyros! -
I need help on this question
hello
if you don't know the lock code, you will have to reset and restore your ipod
Please rad this article from Apple knowledge base
http://support.apple.com/kb/HT1808
bye -
In my accessibility i click on VoiceOver now i cant unlock my phone, i need help
in my accessibility i click on VoiceOver now i cant unlock my phone, i need help
If not then the following commands apply while VoiceOver is activated:
Tap once = Select item
Double-tap = Activate selected item
Three Finger Swipe = Scroll
So three finger swipe to unlock the screen then tap Settings > Double-tap Settings > Tap General > Double-tap General > Tap Accessibility > Double-tap Accessibility > Tap VoiceOver > Double-tap VoiceOver > Tap VoiceOver toggle > Double-tap VoiceOver toggle -
Trying to activate cs6 and need help please
i just spent an hour with this dude in india trying to activate cs6 production premium academic
i am trying to 'offline' activate my editing rig because it's too heavy to move to internet
also i installed the trial version of cs6 production premium
and tried to activate that with the academic serial numbers (because it installed correctly and the updates, too)
i got the REQUEST code: when you type it into the activation page do you use the spacebar between each set of 4 characters?
are the 0's upper case letter o's or are they zeros?
we tried all sorts of combinations and nothing works so i'm supposed to wait 4-5 hours until licensing/activation people get into the office...
does anyone have any help or advice on this please?
thanks again,
j>editing rig because it's too heavy to move to internet
Since there have been bug fix updates, you will need to get the update files to your computer
Either by using a different computer and a USB flash drive, or by buying a LONG network cable
All Adobe updates start here and select product, read to see if you need to install updates in number order, or if the updates are cumulative for the individual product http://www.adobe.com/downloads/updates/ -
Just started Livecycle yesterday. Need help with Javascripting
I'm new to scripting in general, but have figured out enough to be dangerous in Acrobat. Unfortunately, Acrobat no longer fulfills the need I have for dynamic forms and I have started trying to figure out Livecycle. Is the scripting in Livecycle THAT different from Acrobat that I need to relearn the scripting I figured out in Acrobat? Below is an example. It is in a table where I am trying to determine height of instrument (HI) from the elevation (Ele) and the difference between back (BS) and fore sights (FS). Any help is greatly appreciated. Thanks!
This is the script I used in Acrobat and it worked:
if(this.getField("BSRow2").value) {
var add = this.getField("BSRow2").value + this.getField("EleRow1").value
this.getField("HIRow2").value = add;
} else {
var height = this.getField("HIRow1").value
this.getField("HIRow2").value = height;
This is the script I used in Livecycle and it doesn't
if(this.getField(BS).value) {
var add = this.getField(BS).value + this.getField(Row1.Ele).value
this.getField(this).value = add;
} else {
var height = this.getField(Row1.HI).value
this.getField(this).value = height;Hi i just started programming in java.
im running j2se 1.5.0 on windows xp
im on the subject of classes and objects.
here is my simple little code im trying to get to
compile
public class Newprog
public static void main(String[] args)
Greeter myObjectGreeter = new Greeter();
myObjectGreeter.sayHello();
}now here are the error messages i get:
--------------------Configuration:
<Default>--------------------
C:\Program Files\Java\jre1.5.0_07\lib\Newprog.java:5:
cannot find symbol
symbol : class Greeter
location: class Newprog
Greeter myObjectGreeter = new
Greeter();
^
s\Java\jre1.5.0_07\lib\Newprog.java:5: cannot find
symbol
symbol : class Greeter
location: class Newprog
Greeter myObjectGreeter = new
Greeter();
^
get this error message alot....well actually just
about everytime..
I got it working just once using texteditor but have
no clue how i did it that time...now nomatter what i
try i get this error
I have my enviornmental variable set at
path = C:\Program Files\Java\jdk1.5.0_07\bin;
i am using JCreator Le
i downloaded exact codes from websites and they still
compile with this error..
if anybody with patience could tell me what i need to
do
would i have to configure java some more with
variables?
is my installation wrong?
do i have to save the work on a different file?
thanks in advance
Well here is all that goes
As you said you were pretty new
I suspect the following error done by most of the novice programmers in JAVA
Where is the Greeter class ??
ok may be you must have defined it somewhere else
Mostly the Java Compiler hasnt found out your Greeting class
Try locating that " Greeter.java"
or mention it in an other file located in the same folder as "Newprog.java"
public class Newprog
public static void main(String[] args)
Greeter myObjectGreeter = new Greeter();
myObjectGreeter.sayHello(); -
Bluetooth cant send files...need help
hi ppl a recently bought a usb pen and a new cell phone with bluetooth suport...well im using bluetooth gnome libs and utils...a dont have anyproblm on sync the pc and phone..all works fine if i send from the cellphone to pc...ok...but the reversed way doesnt work...i notice that on gnome it exists on menu (right mouse button) a "send to..." ok..but it doenst work..i opened a terminal ran: hciconfig -a ....ok got the adress..and tryed to send..nothing happens...does any one can help..or had the same problm?
i dont know if i have the new or the old ipad, but i cant connect to itunes to do that. itunes gives me a message saying i need to upgrade so it cant run its software. but to upgrae it i need to connect to itunes so im basically stuck.
the itunes on my computer is 11. something so its fully up to date.
on my ipad it says iOS 6.0.1 so i dunno if thats up to date or not.
please respond -
I cant format my laptop! Need help
I cant format my laptop with recovery system.it says Partition removed. What is that mean? is there any solution to format my computer back to factory image?
Hi There,
Machine has recovery partition which is removed or corrupted. In such situation you need to order the recovery media from hp. Steps available below, using these discs you can re-image the machine to factory shipped setup.
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00810334
hope it helps.
I work for HP.
**Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Regards,
WW
“I am an HP Employee“
***** Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem*** -
The nsu cant recognize my n95, i need help
hi the nsu cant recognize my phone although i reisntall it and the nokia pc suite again and again, and followed the help instructions.
i need another version of the nsu- older version to try to use it and it may help with the problem.
does someone has an older version of nsu or can tell me where can i find it?
thank you in advance
yuvalHi subress
Unfortunately if you're looking to update N95 to v21.0.016 you have to use latest version v1.4.23en of NSU. As previous poster mentioned any empty or corrupted registry keys from previous installations can prevent NSU from installing correctly.
Happy to have helped forum in a small way with a Support Ratio = 37.0 -
Can someone please help me install CS6 on my computer. I have downloaded both files. I have my serial number
Hi Rozie,
Can you please share the error message that you are getting while trying to complete the installation?
Cheers,
Kartikay Sharma -
I AM TRYING TO IMPORT CHARACTERS FROM A TAB DELIMITED FILE INTO A TABLE ON LABVIEW. ONCE THE DATA IS IN THE TABLE I WANT TO BE ABLE TO SELECT INDIVIDUAL STRINGS FROM THE TABLE AND PLACE IT IN A NEW TABLE. WHEN I CLICK ON A STRING I WOULD LIKE THE SELECTED STRING TO SHOW IN A TEXT BOX LABELED 'SELECTED STEP' AFTER ALL THE SELECTED STRINGS IS IN THE TABLE I WOULD LIKE TO SAVE THE NEW TABLE AS ANOTHER SPREADSHEET -- TAB DELIMITED -- FILE, MAKING IT ACCESSIBLE TO OPEN. HERE IS WHAT I HAVE SO FAR. I CAN INPUT DATA INTO THE TABLE, BUT I CAN ONLY TRANSFER ONE STRING INTO THE TABLE I WOULD LIKE TO BE TO INPUT MULTIPLE STRINGS. ALSO WHENEVER I TRY SAVING THE FILE, IT ALWAYS SAVES A UNKNOWN FILE, HOW CAN I GET IT TO SAVE AS A SPREADSHEET FILE. THANKING ALL OF YOU IN ADVANCE FOR YOUR HELP!!!!!!
Attachments:
Selector.zip 30 KBPondered,
The question you are asking is the same one that you asked in: http://forums.ni.com/ni/board/message?board.id=170&message.id=132508#M132508, to which I supplied a revised version of the original vi you used (which was modified from the original one I supplied to an earlier thread). A couple of questions: 1) What does my latest not do that is in your question, 2) Why are you starting yet another thread about the same problem? We are here trying to help, it makes it a lot easier if you keep the same problem in the same thread, it reduces duplication of effort from those that might not have been following the previous thread(s). Those of us that don't have our "names in blue" are just doing this "for fun" (the blue names are NI employees, who may still be doing it "for fun"), and it makes it more fun if it doesn't seem (correctly or not) that our attempts are ignored. If an answer doesn't help, or seems incomplete, post a little more detail to the same thread so that the original respondent, or someone new, can provide more information, or understand your problem better.
P.M.
Message Edited by LV_Pro on 07-20-2005 01:20 PM
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion
Maybe you are looking for
-
Early 2011 MacBook Pro- The thermal paste discussion.
It is my goal to clear up the questions and concerns Apple customers have been having regarding heat or fan related concerns with Early 2011 MacBook Pros. If your MacBook Pro was produced within the last few months the thermal issue has been resolved
-
Why did I fail to configure ODBC cartridge of Oracle Application Server 3.0.1 Advance
Firstly, sorry that I don't know if this question is suit for this forum. Now I want to query oracle8 database through ODBC cartridge of OWAS. My software environment is: Oracle Application Server 3.0.1 Advanced Version, Oracle8 Enterprise Edition 8.
-
Delivery has not yet been put away / picked (completely)
Hello SDNers, I have a Batch program that is calling VL02n for Delievry Picking ,Pcking & PGI.... This batch program runs in Background For Some Delivery it is giving this Error Message "Delivery has not yet been put away / picked (completely)" ..
-
Lightroom 2.7 and Camera Raw 5.7 Release Candidates now Available
http://blogs.adobe.com/lightroomjournal/2010/04/camera_raw_57_and_lightroom_27.html Regards, Tom Hogarty Adobe Systems
-
How can I import metadata from another Aperture library to a new one in my new computer? Is it possible? I have 20.000 pictures and I have imported them to my new computer, but I have lost the IPTC-information during the import. Can anybody help me?