Cant unlock ipod, calibration off, reset and still wont work?

the slide goes almost all the way then falls back. cant unlock. The one time it did unlock nothing on the right side worked

- Nexy would be to restore from backup
- Then restore to factorydefault/new iPod and set up as new device.
How to set up your iPhone or iPod touch as a new device
- Last, make an appointment at the Genius Bar of an Apple store since you likely have a hardware peroblem.

Similar Messages

  • When i plug my ipod in, it shows up on desktop as a hard drive, but wont show up on itunes. All my music/videos everything has been wiped off somehow, restored it and still wont work! Please help!

    When i plug my ipod in, it shows up on desktop as a hard drive, but wont show up on itunes. All my music/videos everything has been wiped off somehow, restored it and still wont work! Please help!

    - Have you tried the troubleshooting here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    - You can try disabling the camer notification
    http://support.apple.com/kb/TS1500
    - Do you have any camera, scanner or similar software installed?  That may prevent iTunes from seeing the iPod.

  • When i charge my ipod it turns on to the apple sign then shuts down again wont turn on and has no battery i tried getting a new cable but it still didnt work i also tried to push the home button and power off button and still didnt work also out of warren

    when i charge my ipod it turns on to the apple sign then shuts down again wont turn on and has no battery i tried getting a new cable but it still didnt work i also tried to push the home button and power off button and still didnt work also out of warrenty

    When you plug it in to iTunes does it show up under devices? Try restoring it. That's the best thing you can do if you're out of warrenty

  • I plugged in my iphone 5S and locked the screen 20 minutes later I tried to open the phone it will not turn on i treid reset and that wont work I have a black screen

    i plugged in my iphone 5S and locked the screen 20 minutes later I tried to open the phone it will not turn on i treid reset and that wont work I have a black screen,
    I tried just holding down the power key...NOTHING

    Do a reset, hold down the home/sleep button together until you see the apple logo and then release.

  • My iWeb Account wont update it says Can't create the file "mwmac_white.png." The disk may be damaged or full, or you may not have sufficient access privileges... This has never happend  I deleted other sources on website and still wont work? Suggestions?

    My iWeb Account wont update it says Can’t create the file “mwmac_white.png.” The disk may be damaged or full, or you may not have sufficient access privileges... This has never happend  I deleted other sources on website and still wont work? Suggestions?

    Welcome to Apple Support Communities.
    This is the image contained in the file causing the problem...
    I certain the original is contained in the Combo updates and on the OS disks.
    As a temporary fix, click on the image above to open it.
    Use Screen capture (Shift+Command+4) and click on the opposite corners of the image.
    It will be saved as a Screen shot 2011-mm-dd at hh:mm.png
    Right click on the filename in Finder and rename it to mwmac_white.png
    I'm not certain, but the file might need to be moved into the Documents directory in the Subdirectory named for the website name you are editing. That's where it is on my system, but I moved a bunch of files when I restored from Time Machine about 18 months ago.
    I also have many copies of mwmac.png, a separate copy one for each web page where the image appears in my website.

  • I Have done everything and even checked if it was enabled and still wont work

    I have tried everything to see why this wouldn't work and I have even checked to see if enabled and it was but it still wont work on anything even though it says its enabled I want to get some help

    Do you have Final Cut installed on your machine?
    If so, you may want to look at this article: http://support.apple.com/kb/TS3528
    Let us know if that helps.

  • My ipod touch (4th) suddenly wont connect to my wifi. Other gadgets are connected though. I tried resetting the network and turning the wifi (and ipod) on and off but it still wont work. Any suggestions on what to do?

    My ipod touch (4th) suddenly wont connect to my wifi. It connected fine before and all of my other electronics (tablets, computers, laptops, gaming systems, etc.) are connected and working completely fine. I tried turning the wifi setting on my ipod on/off as well as the actual ipod itself. I also tried resetting the network settings but neither of these options worked. Any suggestions on what I should do?

    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network       
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • My Ipod Touch iOs5 will not update apps, I did reset and still not work

    My Ipod Touch will not update apps.  The apps that need updates are frozen.  I select update it says installing or waiting. The app is shaded and not able to use until I can update.  I did reset but still not updating.  What else can I do?

    Thanks.  I updated my ipod touch but more importantly I had to specifically request to sync my apps.  Once I synced my apps from  my ibook, TED and other apps are highlighted back to normal. I will use fewer apps less updates to deal with.  Computers are quite a pain with all the constant updates to install.

  • New i6 is not working with Acura - have tried a reset and still not working. This is urgent as I must be able to connect via bluetooth in my vehicle

    My i6 is not connecting to handsfree in vehicle - have reset a few times-still not working as handsfree. Can dial but then goes to device. Also continues to disconnect.
    Verizon carrier
    Acura MDX 2014
    i6
    ios 8
    Please help ASAP!

    You have to go to autherized iPhone agent.

  • HT204382 i downloaded a movie with .avi and also downloaded the flip4mac and still wont work. what do i do?

    someone help please.  i downloaded a movie and it said it wont play because a plug in was missing.  i downloaded flip4mac and still will not work. please help.

    There is no single codec for movies that have .avi extensions. AVI is a container format, not a specific type of file. An AVI movie may use one of the Indeo codecs (there are at least four that I'm aware of, none of which have been ported to Mac OS X) or one of the various flavors of DivX, among other possibilities. You'll have to find out what codec was used for the movies you want to view to determine what you need. Note that not all codecs for the various .avi movies are available for QuickTime. 
    If you want to try "hit and miss", Perian, which rolls several codecs into one package, might work. If not, you can try the codecs at http://www.divx.com/ and http://www.3ivx.com/ and see if one of them will work for you. Do not install both Perian and the DiVX/3iVX codecs at the same time. 
    If you just want to play the movie any way you can, you can also give this player a try: 
    http://www.videolan.org/vlc/ 
    Regards.

  • TS4268 hi just setting up new ipad 2 and cant get imessage to work . when i put in apple id it says password incorrect have checked and reset but still wont work

    hi just setting up new ipad 2 but when trying to use imessage it says sign in with apple id which i do but password doesnt work. have checked it numerous times but no luck. any ideas ?

    The screen "Create Apple ID" is for users without an Apple ID (or someone who has forgotten their password).  Since you do not want to create a new Apple ID, you are on the wrong screen. 
    Go back to the Sign-In screen and then sign-in with your Apple ID (or start over).  The sign-in screen will have both fields to input:  Apple ID and then Password.  The Password screen may be a secondary screen after you input ID and hit Enter.
    Hopefully, your further forays into the Land of iPad will not be as disconcerting as your beginning.  I was also new to Apple (three years ago with the first iPad).  It was a bit aggravating at first, however, now we own multiple Apple computers, peripherals and IOS devices (iPads,iPhone,Apple TV) and really appreciate the functionality and usability.

  • I got tongbu and it told me to update so i did and now it is completely wont work ive tried to reset it still wont work then i triend to dsf nope how can i fix it or get a new ont

    Pleas help

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • Ipad will not slide to unlock. have tried home key and power button and still wont work

    Ipad will not slide to unlock. Have tried home key and power button but has not worked. Help please?

    Did you input you correct passcode? The iPad may be disabled.
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • My apple tv is not working everytime i try to down load it stops and says error try again later i have updated credit card itunes and rebooted both and still wont work i am loosing my patience as i cant get any support for this

    my apple tv is not working every time i try to download a movie it says error try again later

    I am having this problem.  At first with the new iPhone 5, and then with the iPad 2.  I am not sure why this is happening. 
    My gut feeling is this is an iO6 issue and here's why -
    The problem mainly occurs with apps.  I have about 150 apps, and when I plugged in the phone, iTunes went to sync all of them.  The process would hang up after about 20 - 30 apps were loaded onto the phone. I could tell where about the process hung up because the apps on the phone showed up as "waiting".
    Then on the iPad 2 I plugged in to sync and saw there was a huge "Other" component in my storage.  It required me to restore the iPad 2 from backup.  With this restore the same issues occurred - putting the apps back on the iPad would hang up.  The videos on the iPad also got stuck - maybe after about 10 hours of videos transfered iTunes crashed.
    My solution has been to soft reset the device, restart Windows, and continue the process until it's complete.  This is remarkably inefficient and time-intensive but everything works with patience.
    I have been wondering if others have had these same problems. 

  • Can not turn i pad on, i did hard reset and still not working ? help please

    can not turn i pad 2 on , I did try the hard reset, no luck. help please

    Probably depends on how long you've had it. I don't know what Best Buy's returns/repairs policies are, and whether you're within their exchange period. You could try contacting them

Maybe you are looking for