Cant unmount external drive

Hi there,
I use super duper to back up my system drive to an external drive.  I quit super duper and about a minute later the external drive light is lit red meaning the drive is busy.  I am not able to unmount or eject this drive.   The error is "An error occurred while trying to eject '<$drive_name>'"
What can I do to cleanly unmount my external drive?
Cheers,
Noah

Typically this sort of question is better answered on Superduper forums, as it's their software.
I suspect Spotlight is indexing the external drive, why it's busy and can't be unmounted.
So head to System Preference Spotlight and turn off indexing except for the boot drive, also change the name of the clone as OS X gets confused if there are two drives with the same name.
If after rebooting you can't unmount the drive, try this
Drive won't "unmount". First check for Spotlight or open programs using the drive/volume, reboot.
>>>Force unmounting launch Terminal type diskutil list and press enter/return for a list of devices.
>>>Take the Identifier and add here for disks: diskutil unmountDisk force Identifier and press enter/return.

Similar Messages

  • Restoring time machine files from unmounted external drive

    Help please..
    I have a time machine backup I need to restore.  It's a backup from an external drive that has failed. 
    When I go "enter time machine," I can't see the contents from the external drive anymore to restore it.. because the external drive isn't mounted.  It's not mounted because it has failed.  I can see when I browse the TM backup directly via finder there are files from the amounted drive in the backup... as I'd expect. 
    So... How do I restore drives from an unmounted external drive?
    Do I need to buy a new drive and name it the same as the old drive?  Then will it show up? 

    While in Time Machine, press the key combination shift-command-C. The front window will show all mounted volumes. All snapshots should now be accessible. Select the one you want and navigate to the files you want to restore.

  • Cant unmount hard drive

    I have a Maxtor 500 GB quickview HD in an ext hd casing with esata,firewire 400, and USB connections. Was copying my Mac Book Pro hard drive to the external hard drive with carbon copy cloner and it froze on transferring the library. On restart the ext hd still loads on the desktop, but inconsistently. I tried to erase the ext hd in disc utility, and repartition as guid format (the hard drive was extended journaled and i think apple partition map. It is telling me it cant unmount the hard drive to erase. What am I doing wrong? How can I unmount to reformat? Any suggestions most welcome.

    I bought 3 external Hard Drive set ups with the maxtor internal hard drives. Two of the 3 work perfectly on all 4 of the mac computers I have access to. The defective one acts the same on all 4 computers, so it is not the computers, and seems to be something with the defective external hard drive. I have even started the computer from my install discs, gone into disc utility and tried to first aid, erase, and partition with the message always "Can't Unmount the hard drive". I would assume that it is not the cables since the ext hard drive shows up on the desktop of all 3 computers, and changing cables doesnt make a difference when using 3 different firewire cables. Any other ideas on what I might try to get the hard drive to unmount? Is the only other option to see if I can return the hard drive? I really appreciate the comments so far, it is quite helpful to know that it is not just me pushing the wrong button somewhere that unmounts so disc utility can do it's job.
    Thanks again
    Bob Landman

  • Mavericks and unmounting external drive issues upon sleep

    Greetings fellow Mavericks users,
    I'm hoping someone here can provide some insight as to how to correct the issue I'm experiencing.
    Little background:
    I was using 10.6.8 for years on a 2008 Mac Pro.  I saw no reason to update the OS until I recently acquired a USB 3.0 PCI card and an external drive.  In order to use my new hardware, I had no choice but to upgrade to a new version of OSX.  Rather than spend money, I took advantage of the free 10.9.2 upgrade available for my machine.  The upgrade went surprisingly well with no major hiccups or problems encountered.  Yes, a few apps and programs I had running prior to the upgrade were no longer compatible but in the grand scheme of things, my Mac Pro was still alive and kicking along with my most important programs and data.  In fact, the upgrade to 10.9.2 fixed a sleep issue I had with 10.6.8 which required the use of an app called PleaseSleep.  I don't need that app anymore as the machine goes to sleep and wakes up fine.
    Now, on to my dilemma.  Prior to the upgrade, I was using an external USB 2.0 drive to house media that I'd share between multiple network devices around the house via SMB (AFP stinks in this regard, hence my refusal to use it); i.e. BoxeeBox.  I had run out of space on the USB2 drive hence the need to move everything to my new external USB3 drive that's connected to an internal USB3 PCI controller. The first problem I ran into was that Mavericks now uses Apple's own iteration of Samba (SMB2).  After a bit of head scratching and research, I used an application called SMBUp as a replacement to Apple's SMB implementation.  That's one problem solved.  The next thing that I kept running into was that whenever the machine would sleep then wake up again, I'd get an annoying "Disk was not properly ejected" error message.  After more head scratching and research, I've discovered that this appears to be a bug in OSX and how the OS interfaces with 3rd party USB controllers.  Fine.  I purchased a small app called Jettison which for all intents and purposes unmounts any external drives automatically before allowing the system to sleep.  This is where my long-winded (apologies) description above starts to come into play.  Now that I have the SMB issue figured out and am using Jettison to eject this USB3 drive when the machine sleeps, I've discovered that I'll still get the "Disk did not properly eject" error message despite Jettison IF there are users connected to the USB3 media drive.  Is there a work around this where I can either get Jettison or Mavericks to kill the network connection to the share drive before it's unmounted prior to the machine sleeping?
    TL:DR?
    Using Jettison with Mavericks, I'm still getting "Disk did not eject properly" when waking the machine from sleep mode.  Any way to fix this?
    Thanks in advance for any help/suggestions provided.

    I had the same problem with Time Machine and solved it by enabling "Enable Power Nap" in Energy Saver:
    System Preferences...
    Energy Saver
    Restore Defaults
    Check "Enable Power Nap: While sleeping, your Mac can back up using Time Machine and periodically check for new email, calendar, and other iCloud updates."
    2013 21.5 iMac
    OSX Mavericks
    Seagate 1 TB slim USB 3.0 (power is drawn from USB port), formatted to Mac Journaling File System

  • Discussion regarding un-unmountable external drives and more..

    I have a Mac OS Extended (Journaled) formatted LaCie 2TB external USB 2.0 hard drive which I use for backup and file storage with my MBP running snow leopard. Some times when working extremely large folders at work, I actually work right of the hard drive and it works very well. But I have observed an increasingly annoying problem.
    If I keep the drive active and working with whatever for a while and then decide to eject the disk, this almost always causes headaches. Either I get these warnings that the disk cannot be ejected because; Mail is using the drive, Safari is using the drive, Itunes is using the drive...... or some other app. This is annoying but can usually be resolved by simply quitting these apps. My question is; why does this occur? I see no reason for these applications to be using the disk? I haven't found a conclusive response to this question anywhere, always different suggestions/ideas/solutions? Does someone actually know what is causing this behavior and if it can be resolved "permanently"?
    On the occasional time, quitting the applications suggested to use the drive doesn't allow me to eject the disc. It is still in use, but no apps are listed and the only way to eject is forcefully. I have tried:
    sudo lsof | grep -i <filename>
    And yes, I had some interesting results. Although spotlight is not indicating indexing in progress i see that spotlight is using the drive. I know you can add the drive under privacy in spotlight preferences and this eliminates this issue. But there is also "keychain access" using some file on the drive? I just cannot see why this would happen? When this happens, there is no way to safely remove the drive. I have tried relaunching finder, both through dock (ctrloptionmouse click) and terminal (killall Finder), but this does not resolve the eject issue. I have also tried stoping and relaunching SystemUIServer which was suggested somewhere, but this did not resolve the issue. Neither did umount volume or hdiutil eject /Volumes/GusExt/, it only works with -force which I would like to avoid.
    Why would anything BUT spotlight use anything on the hard drive? And is there a way to safely kill any and every process using the external drive so that it can be ejected safely?
    I find this interesting since it seems to be a common phenomenon but I haven't found a single clear cut explanation or solution to these issues? What makes it more interesting is that I, at home, have my own personal WD external drive with photos and my CD collection stored on it. This drive is NTFS-3G formatted through MACFUSE and NTFS-3G. This drive has never exhibited the same behavior, the only difference between the discs, except the file system, is that the LaCie contains time machine backups. But since I do not have time machine active, I don't see why this would effect the unmount process.
    Another topic I would like some feedback on is corrupted files. When this occurs on a NTFS formated disk used on mac, these cannot be removed. And since Mac and NTFS doesn't play nice, I haven't found a way to resolve this. Disk utility wont work, neither will ntfsfix. The only way around this that I have found is plugging the drive into a windows machine and running chkdsk X: -F
    Is there any available alternative for this on Mac that actually works with NTFS disks?
    Hoping for some interesting feedback on this from anyone interested
    Best Regards
    Gus

    Hi again Kappy. Thanks for your reply.
    1. No, none of the files on the drive are being sent by mail, mail should not have any interest whatsoever in the drive.
    2. Most files are created by AMBER 10 and AMBERTOOLS 1.4, molecular dynamics simulation packages. These are UNIX based and I only work with these files from terminal, no GUI. They are created on different servers, downloaded to my MBP and transferred (at least most often) to the LaCie for storage.
    3. I have applications stored on the drive through "time machine backups", but I do not run any apps from the drive. Only locally on my MBP, all terminal based UNIX programs are "pathed" correctly to my internal drive.
    4. As above, time machine backups my apps, but to my knowledge should not run them from the LaCie drive! Only from my local drive...
    5. Disk permissions are full read and write for all. Some files come from /usr/local/ and are specific for my account. But I have taken the habit of "chmod 777" them so I can always access them since I'm the only one with physical access to the LaCie drive.
    6. It has at some point, I see no indication of indexing being made in OS X, only through "lsof" where I usually can see spotlight and keychain accessing files. But I have now put the drive under "privacy" from spotlight so it should not index at all now.
    7. Yes, once a week a manually perform a time machine backup of my local drive onto the LaCie. Between backups I disable time machine.
    8. nine times out of ten I can eject the disc without warning if I first quit mail, iTunes and safari. Same goes if I get the warning, exit the app and then try to eject again. One time out of ten it doesn't seem to matter if I quit all the apps except finder, and ever relaunch finder. Some undetermined apps is still claimed to use the drive. Then the only solution of to force eject.
    Best regards
    Gus

  • Cannot unmount External drive for backup....help

    I am trying to use a new My Passport external drive to backup.  I installed the mac os info however it says I must "erase" contents to use.  When I hit erase it says the drive "couldn't unmount".  Also tried to backup to the drive and it said "disk is not in Mac Os Extended (journaled) format.  Any ideas, I am not real familiar with this process.

    Hi KJM4,
    Thanks for using Apple Support Communities. Based on what you stated, it sounds like you need to format the HD. I would recommend that you read this article, it may be able to help the issue.
    Final Cut Pro X, Motion 5, Compressor 4: Format drives as Mac OS Extended - Apple Support
    Formatting a disk using the Mac OS Extended (Journaled) format
    Important: If you have any files you want to save, be sure to back them up to another drive before you erase the drive they are on. Reformatting a drive will permanently erase all of the data on it.
    From the Finder, click the Go menu and choose Utilities.
    Open Disk Utility.
    Select the disk or partition and click Erase.
    Choose a format from the Format pop-up menu. Choose Mac OS Extended (Journaled).
    Type a name for the disk.
    If you want to prevent the erased files from being recovered, click Security Options, select the option you want, and click OK.
    Click Erase.
    Cheers,
    Mario

  • Unmounting External Drives

    Hello,
    I'm writing here in hopes to be heard by the Apple Gurus.
    With all the new features like Time Machine in Leopard I find it has become much harder be able to just simply unmount an external drive when you need to. I'm using Leopard on a Macbook, with Time Machine, but when I need to take the laptop out, and thus unmount the external drive, I hardly get anything but the "applications are currently using the drive" message, even when the drive was in sleep mode just before I tried to unmount it. So it means you either have to quit every single application,and wait for the drive to see it's not used anymore, or shut down the computer, in order to unplug. So here's my suggestion, actually two : 1) when the drive is in use, please show the name of the app using it, making it simpler to solve the issue in order to unmount ; 2) and why not an button like "terminate all uses of this drive and unmount".
    Thank you in advance for taking notice of this, it would save a lot of time for laptop owners using external drives.

    Hi
    Nice ideas. Unfortunately Apple gurus don't have anything to do with the Discussions Forums, you could always send feedback to Apple.
    http://www.apple.com/feedback/
    Steve

  • Can't unmount external drive for Repair Disk on disk Utility. Any ideas?

    What does it mean when Disk Utility says that a remote disk can not be "unmounted"?
    I am trying to repair a 500GB external firewire drive. The other one I have connected works fine when I click repair disk.
    Thank you
    Verify and Repair volume “500 GB”
    The disk “500 GB” could not be unmounted

    Open Disk Utility, select the drive in the left side list then click on the Unmount icon in the toolbar. See if that does anything. If the drive is in use then it cannot be ejected until whatever has the lock on the drive is finished with it.
    If nothing is using the drive and it simply refuses to eject then open Activity Monitor, select All Processes from the Processes drop down menu. Click on the processes column to display in alphabetical order. Look for an entry such as "disk.......", select it if it's there then click on the Force Quit icon in the toolbar.
    Another alternative is to shut down the computer, disconnect the drive, then restart.

  • VM Fusion Cant see external drives in XP

    I am new to the Mac world. I haved installed VM Fusion to run XP but windows does not see any of my external devises. I have tried both a thumb drive and a external HD. I can see both of the devices on the Mac side. My Mac is running Tiger.

    Since Fusion is not an Apple product, you'll probably want to post your question in the VMWare Community Forums:
    http://communities.vmware.com/community/vmtn/desktop/fusion

  • How to unmount external drives using xfce eject widget

    I am using devmon, and the devices are automounted when plugged in. I want to be able to unmount the devices by clicking the eject widget in thunar. I am only able to unmount through the CLI by sending a command, ie:
    devmon --unmount-all
    when I tried to eject with thunar I get an error dialog: "Failed to eject [device] Not authorized to perform operation".
    How can I use the thunar eject button?
    I am using xfce.

    Is your consolekit session initiated correctly (ck-list-sessions)?

  • Help - Unmounting external USB drives causes error to system drive

    Hi,
    I am having problems with my Mid 2009 24" iMac OS 10.6.7. When unmounting external drives(usb OR firewire), I get either a message that "your computer must be restarted...." or sometimes system freezes.
    Upon reboot and examining system drive with Disk Utility, I will find file count and/or folder count errors. I must then reboot from my SL disc, repair the errors and reboot, after which the system seems to run without problems...
    So far, upon reconnecting and mounting those external drives, I have found no errors or anything that would lead me to believe that they were not unmounted correctly...
    Any help with this would be appreciated. It is beginning to be frustrating to go through this crash and repair of the system drive each time I try to use an external drive....
    Thanks,
    JP

    I have heard others with this problem so I am really surprised none here can help.  My iMac has just crashed for the third time with corrupted disks because of this problem.
    I will try Macfixit or something.  Thanks

  • Some major Leopard annoyances (mainly related to external drives)....

    Okay, I have some real pet peeves with Leopard....
    1. Repairing permissions takes FOREVER.
    2. I can't unmount external drives from the Finder window. I click the little eject icon, but nothing happens. Also, dragging the drive to the trash does nothing. The only I can disconnect them is to use Disk Utility, which is very annoying.
    3. To connect to my AirDisk, I have to physically turn the drive off and back on again. If I eject it, I can't reconnect without restarting it. This is also very annoying, as the drive is in another room.
    4. I can't set some folders to use icon view and some to use list view, etc. When I switch in one folder, it changes the view for every folder on the computer (as well as on an external drive).
    5. Still no New Tab button in Safari!!! (this is more of a minor pet peeve, but come on Apple..)
    I'm using a 17" MBP C2D, by the way. It's not like I'm trying this on something that's barely Leopard compatible. I think I might go back to TIger.

    N.2 and N.3 are my problems too. Very annoying.
    I hope in a 10.5.1 update very soon.

  • How to recover files off unmountable seagate external drive

    I have been using a Seagate Backup Plus external drive for several months on my iMac destop. The external drive runs off of USB no other power source. I unmounted it the other day to use on my mac power pc and transferred mp4 files onto drive without problems. Unmounted drive and plugged it back to iMac and I am getting prompt The disk you inserted was not readable by this computer  choices of initialize, ignore, eject buttons. I have shut down and plugged it back in and reset the PRAM. I can see the unmounted device in disk utility and also I can see that it's plugged into the USB port. I have tried plugging the device into the mac power pc, macbook and pc all but pc give me the same response. On the PC I can't see the drive at all, though it has power and can be ejected. I would like to find out how to mount this drive to retrieve the files off of it. I am also wondering what to do with this drive, ie.e reformat it (if and when I retrieve files) or try to return it (bought it in Sept. 2012). Any help on this subject is greatly appreciated!

    I did try Disk Utility Repair disk command, but when I ran it this is the report I received:
    2013-03-07 17:02:52 -0500: Verify and Repair volume “disk1s3”
    2013-03-07 17:02:52 -0500: Starting repair tool:
    2013-03-07 17:02:52 -0500: Checking file system2013-03-07 17:02:52 -0500: Checking Journaled HFS Plus volume.
    2013-03-07 17:02:52 -0500: Invalid node structure
    2013-03-07 17:02:52 -0500: Invalid B-tree node size
    2013-03-07 17:02:52 -0500: Invalid node structure
    2013-03-07 17:02:52 -0500: Invalid B-tree node size
    2013-03-07 17:02:52 -0500: The volume   could not be verified completely.
    2013-03-07 17:02:52 -0500: Volume repair complete.
    2013-03-07 17:02:52 -0500: Updating boot support partitions for the volume as required.2013-03-07 17:02:52 -0500: Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
    Disk Utility stopped repairing “disk1s3”: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
    I was trying to recover data without purchasing software if at all possible.

  • Cant seem to get a seagate external drive to show up in finder when on the

    cant seem to get a seagate external drive to show up in finder when on the airport extreme base station. ver 7.5 using 10.6.2 any special setting to show it up in finder?

    I tested a FAT 32 drive and it will show up.
    Open your Hard Drive and look for your AirPort Extreme under the SHARED heading
    Click the AirPort Extreme icon and then click Connect As at the upper right of the window
    Your drive should appear
    If not, click anywhere on your open desktop so that the Finder menus appear at the top of the screen
    Click Finder, then click Preferences, then click the General tab
    Under the heading of "Show these items on the desktop", make sure there is a check mark next to "Connected Servers"

  • External drive no longer mounts or unmounts or formats. Help!

    I have a 1TB external Seagate drive which is used to store my time machine backup for an iMac (2010).  My time machine is failing as it says there is no backup disk.  I ran disk utility.  I see it on the external drive on the list below the line on the drive listings.  I see the external drive and the time machine volume indented below it.  I verified the external disk and it says it is fine.  However it will not let me mount the external drive or the time machine partition.  I cannot even re-format the disk because it says it cannot be unmounted (which is obvious it it does not let me mount it).  It is connecting to the drive because it can see the verify results.  I also tried every combination of unplugging power and cables to both the unit and the Mac itself.
    Question(s):
    1.  Is there anyway to remount the external seagate drive?
    2.  Can I format it without mounting it.  I don't care if I lose anything as it is all time machine backup files only
    3.  Do I need to format it on my windows PC and then reformat it again on a Mac!?
    Help I am at my wit's end!!
    Thanks
    RZ

    Disk Utility - Format,  Erase,  or  Reformat  a  Drive

Maybe you are looking for