Cant use anything other than 44.1KHz??

Whenever I set a project to anything other than 44.1KHz it sounds awful. My RME fireface card supports 44.1, 48, 88, 96, 192 (and anything in between using DDC thank you very much RME!). What do I need to do?

Based on the assumption that you are not clocking from an external source which is running at 44.1
Set your internal clock in the Audio Midi Setup program (it's in Applications>Utilities) to whichever clock you wish to use (set it at the Audio Input section and the output should toggle accordingly) then boot logic and change Logic's clock in the Audio pop down menu. This is kind of a boot up thing, if you have iTunes or Quicktime running your computer may not like you for changing the clock.
Good Luck.

Similar Messages

  • I just updated my Apple ID to a current email address, it worked on my laptop but my phone is still using the old one and neither password works. I can't download or use anything other than phone calls and texting on my phone now. Help!

    I just updated my Apple ID to a current email address, it worked on my laptop but my phone is still using the old one and neither password works. I can't download or use anything other than phone calls and texting on my phone now. Help!

    go to settings
    then to store
    tap your id then click sign out
    then sign back in and you should be fine

  • Report using Script to determine users using anything other than Free/Busy Only Permission

    Is it possible to create a script that can query all mailboxes in an exchange environment, and return any mailboxes that has anything other than "Free/Busy"?   This would be in Exchange 2007.  Not sure why it put me in 2013.
    -It's not enought to just be right.

    Is it possible to create a script that can query all mailboxes in an exchange environment, and return any mailboxes that has anything other than "Free/Busy"?   This would be in Exchange 2007.  Not sure why it put me in 2013.
    -It's not enought to just be right.

  • Android Native Extension crashes if i use anything other than Activity class to extend my activity

    It seems my android native extension is crashing everythime i use anything like FragmentActivity etc. Looks liek android's supportv4 classes are also not supported with native extension coding. I even have my question posted here.
    http://stackoverflow.com/questions/16470791/adobe-air-native-extension-application-crashes -on-using-fragmentactivity
    If anyone has a answer please help out.

    Any progress on it? I have the same problem...
    Thanks

  • Still cannot send or receive email using anything other than webmail

    I have they yahoo/verizon email and any email program, other than webmail, will not send or receive. It is not a settings issue as it was working one day...about 3-4 months ago...and then stopped the next day. Also, my sub-accounts will still send and receive...it is ONLY the primary account...so definitely not a settings issue.
    Verizon email is horrible..switching over to gmail and ending this horror show.

    scratch that....for whatever reason...it is now working again 
    Spoiler (Highlight to read)

  • Suddenly, I can't charge my 5g iPod using anything other than my CPU!

    I've had my 60gb iPod Video (5g) for nearly a year now. In that time, I've used 3 methods to charge my iPod: the compy, my Logitech MM50 speakers, and a little no-name battery pack with 4-AA batteries. It's worked perfectly for months that way.
    Now, suddenly, I can't charge using the speakers or battery pack anymore. I didn't change anything, I didn't do anything differently, it just suddenly won't charge unless I connect to my computer.
    Anyone know how to fix this problem? Or am I doomed to connecting to my computer? That would suck, considering that I rely on my speakers to charge it at home. Ideas?

    Have you tried restoring it with the iPod updater? If
    you have all your music on the computer, that's what
    I'd do.
    Failing that, I assume you've tried resetting it?
    My 30GB Video fails to charge on my ZipLinq adapter,
    but after unplugging the cable, and reseating it at
    both ends, it charges fine.
    I haven't restored it yet; that's my last resort method. I have tried resetting it, no deal.

  • Using anything other than full colour mode in screen sharing

    Hi, I have an iphone with jaadu on it that I use for screensharing. I used to use vine server, but I was having a lot of problems for it, so I reverted back to using Leopard's screensharing feature, which I like because it runs discreetly in the background.
    However, what I was wondering, is how I can change the quality mode to something like greyscale or 8 bit. I know its possible to make my computer greyscale in UA options, but can I have it do this automatically everytime a VNC connection is initiated? I've tried editing the com.apple.ScreenSharing plist or whatever it was called and changing the observe quality to 2 and 3, but the changes do not reflect in my client (Jaadu)
    Any help would be appriciated!
    Thanks!

    bump for vnc and iphone love =D

  • Refresh event problem, when using anything other than on-load

    I am attempting to create a series of sequential xml loads, without any user interaction.
    I.E. xml1 contains the location of xml2, and xml2 contains the location of xml3, so the next must wait until the prior xml has been loaded.
    It is impractical to use dropdown lists or refresh buttons to update these - (they should all happen behind the scenes as they are just loading selections that change depending on the user privileges).
    While my desired refresh-event is the when-value-becomes, I have tested when-value-changes, and found the same problem.
    When I set these to automatically chain through (xml1 is set to refresh-on-load, xml2 is set to load by a trigger cell that equals "load" if there are values loaded from xml1, and so on) - the conditional refresh events do not fire.
    When I use a manual refresh button, they load without a problem, and when I use a dropdown list to test the on-change or value-equals logic, this loads correctly too. So the problem is specifically during the intial load-up point, and is reproducable in any new xcelsius project I create.
    To state the problem precisely, during the initial loading phase of xcelsius, the logic behind when-value-changes and when-value-equals load events does not seem to execute - however after the initial load, they fire correctly based off user input.
    Is there any workaround or solution? If any clarification is needed, let me know where.

    May not be your exact issue, but something similar -
    Only a problem w/SP3 - I used dynamic visibility to hide two connection refresh buttons that were loading data after components finished. They stopped working until I turned the dynamic visibility off and just hid them behind other layers. Confirmed by revealing them after load and the triggers ran appropriately. May not be the issue (since you didn't mention visibility), but worth a try.

  • Why does the "this cable or accessory is not certified..." message continue to come up on my iphone, when I have nothing plugged into my iphone and have never used anything other than the cables that originally came with this iphone?

    As the question says.  This message pops up on my iphone every 30 seconds, even though nothing is plugged in.  I have turned my phone off an on, plugged in the real cable and unplugged it, restarted the ios, nothing works.  This started only after I updated to ios7.

    Check the port with a magnifying glass and a bright light. There may be something stuck in it.
    Best of luck.

  • HT4847 iOS8 uses more space on iCloud for backup than before without changing anything other than upgrading to iOS8... why?

    iOS8 uses more space on iCloud for backup than before without changing anything other than upgrading to iOS8... why?

    Hello westbrkk,
    this is an user-to-user forum, so unfortunately we won't be able to tell you why.

  • I am using Windows XP on my laptop. Had to format the C drive. I have reinstalled iTunes but I am unable to add anything other than music, TV shows and movies to the iTunes library. It is not showing any option to add podcasts, books, photos or apps.

    I had to format the C drive recently. I have reinstalled iTunes but I am unable to add anything other than music, TV shows and movies to the iTunes library. It is not showing any option to add podcasts, books, photos or apps. These things are available on my iPhone but are no longer there in the iTunes library. Please help.

    In iTunes go to general preferences and check the boxes for those you wish to see in the library.

  • APEX 4.2.2 - ORA-6502 when logging in to application with anything other than Firefox!

    If I try to log into my application through anything other than Firefox I get the following message on the screen:
    Error
    Error processing request.
    ORA-06502: PL/SQL: numeric or value error
    OK
    If I try to access the APEX Builder through a browser other than Firefox, I get no HTML returned.
    Last night I upgraded from 4.1 to 4.2.2 and ran the patch that dealt with missing developer toolbars...
    Of course, I only ever use Firefox, but my users are using IE...
    Any ideas?
    Message was edited by: AndyH
    Clarified that this is a 4.2.2 issue.

    Hi,
    I do not know if this relating bug 16760897
    Oracle Application Express 4.2.2 - Known Issues
    Regards,
    Jari

  • Can I hook up Apple TV to my HDTV? If so, do I need anything other than the Apple TV box?

    Can I hook up Apple TV to my HDTV? If so, do I need anything other than the Apple TV box?

    You'll need an HDMI cable to hook it to your TV.  Once you have that, you just have to plug in the Apple TV power and then plug it into the television using the HDMI cable.
    EDIT:
    If you don't have wireless you'll also need an ethernet cable to hook the Apple TV up to your router so you can stream content from the internet.
    Message was edited by: alexives

  • Anything other than buttons on ALV Grid toolbar?

    Does anyone know if anything other than buttons can be placed on a ALV Grid toolbar, eg. a piece of text or an input field? The filter button for data selection may be too cumbersome/slow for a call centre operator; I want to have a display field with a dropdown identifying a data field and an input field to accept a value on which to select.

    may be you can do some thing like this..instead of having a input field on the toolbar. have an input field above the ALV grid(this is applicable only when you are using Object Oriented ALV).
    | input field : ________________   |
    |__________________________________|
    | ALV GRID OUTPUT                  |
    |__________________________________|
    you can have a button along with input field also. enter the value in it, and press enter . in the enter handling fetch all the data. and display in the ALV grid.
    in the screen fiest create input field, and button, then place the custom control. on the custom control you place the grid.

  • System won't let me configure to anything other than stereo

    my pavilion dv7-7020us no longer allows me configure the sound as 4.1 or anything other than stereo. this problem started within the last couple of days tho i'm not sure exactly when as i mostly use headphones. i've reinstalled all of the system drivers and ofc the audio drivers and it made no difference. i'd rather like to get my sound working the way it's supposedta again.

    anybody else had this problem?

Maybe you are looking for