Cant use constant selection for ONE restriction in selection

Hi, all
BW70 SP8, BI Addon SP8 Rev 802. I cant use constant selection for ONE restriction in selection, i can set constant selection only for whole selection, but it fix value for all query. I need to fix only one character value.
Is there a way of doing this?

Global restricted key figure doesn't allow to restrict one char too. There is no constant selection checkbox in restricting char context menu.
I use multiprov. Prov1 consists of Char1, Char2 and KF1. Prov2 consists of Char1, Char2, and KF2.
I want to restrict Prov2.Char2 to # for KF2, and not restrict Char1, but! I can set constant selection for only whole selection(KF2 and Char2=#). So it has same value for all Char1 values. I need to constant selection only for char2.

Similar Messages

Real Sum aggregation, when using Constant selection

Hi, all!
I have to infoproviders:
Cube1
MATERIAL
PLANT
CALDAY
FLAG
KYF1
Flag - may be considered as attribute of MATERIAL x PLANT x CALDAY
Cube2
MATERIAL
PLANT
CALDAY
KYF2
I need to analyze next slice:
FLAG
MATERIAL
KYF1
KYF2
Thus, I get next results
F1 M1 1 0
F1 M2 3 0
F2 M3 2 0
M1 0 10
M2 0 5.
M3 0 3.
So I can't see KYF2 for FLAG values. To see it I make KYF constant selection for FLAG. So I can see KYF2 for corresponding MATERIALs:
F1 M1 1 10
F1 M2 3 5
F2 M3 2 3
But if I use result lines, they show whole sum for KYF2, not dividing between flags, because I use constant selection:
F1 M1 1 10
F1 M2 3 5
Totals 4 18
F2 M3 2 3
Totals 3 18
Glob Totals 7 18
And the question is:
Is there any way to make result calculation use sum of underlying items, not using OLAP to calculate it?
Thanx in advance.
PS: I cant use infoset for joining two cubes, becuase I need to use outer join, which is forbidden on cubes.
PPS: I cant use separate DSO or IOBJ for storing FLAG, because it has too many values.

How this can help me? This will give me total for every material for FLAG = #.
I found solution:
I hust create restricted KF with CS on FLAG
Then Calculated KF where this RKF is multiplied by reference to MATERIAL (for intermediate aggregation). Then I use the CKF in report structure with time restrictions.
It works!
Thanx for your tries.

Problem with 0FIGL_VC1 when use constant selection in the query

Please kindly help me. I have this problem for 2 weeks already.
When I create a query from virtual cube 0FIGL_VC1 (balance sheets / p&l statements), if I use constant selection in any of key figure, my report could not display financial statment correctly.
My report layout
Columns : key figures (including 0FIGL_VC1_CK001)
Rows: 0GLACCEXT (financial statement item) << as hierarchy
Initially, the query is processed correctly.
However, based on the requirement from my customer, I really have to use "constant selection" for some of my columns. Whenever I do so, the query display incorrectly. (Some nodes of financial statement item just disappear. (it seem like all contra item will disappear.)
Please help!

If I dont use constant selection in the query, data are display correctly.
But If I use constant selection in the query, some financial statement item dont display any value
Example :
   Financial statement item(Display in hier)     Period1   Total Period1(Constant selection)
             A                                                       10            60
             B                                                       20            60
             C                                                       30            60
             D                                                       0              60
- Financial statement item "D" has some value.
- Financial statement item "D" is in the hierarchy,one gl account has been assigned to more than one group differentiated by debit/credit indicator.
Please help!!

Can I use a domain for one site and mobile me for a different site?

Can I use a domain for one site and mobile me for a different site?
I have two sites, I would like to have up and I would like to do one through a domain and one through mobileme is this possible?

Yes you can. You can use the CNAME method of forwarding for the first site (the top site in iWeb) and use the MMe URL for your account for the other site: http://web.me.com/YourAccount_Name/SiteName/
OT

Hi I newly started using Iphone 6, I am not getting all the applications list under Use Cellular date for to restrict my unwanted apps on cellular data

Hi I newly started using Iphone 6, I am not getting all the applications list under Use Cellular date for to restrict my unwanted apps on cellular data
Please help me out

Hi Rajesh778484,
Welcome to the Apple Support Communities!
I understand that some of your applications are not appearing under Settings > Cellular on your iPhone so that you can restrict or allow use of cellular data. If you have some installed applications on your iPhone that are not showing here, the first troubleshooting step I would suggest would be to reset your iPhone. Please refer to the attached article for information on how to perform a reset.
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Best regards,
Joe

After updating to the latest version, I'm able to open and use the browser for one day. The next day, the browser doesn't not open up. please help!!!

-reformatted computer, reinstalled everything
-downloaded the newest version of mozilla
-happily went online for one day
-next day, browser does not load
-later the next day, browser doesn't even open up
-now when i go to open mozilla, something like this shows up:
"server busy, taking too long...if your firewall is on make sure mozilla is allowed to browse...adjust proxy settings blah blah...

HI Juanverano,
Not a problem, Safe Mode will disable addons and hardware acceleration. If this continues and it is not an add on this will be the next step to try to disable acceleration:
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
#Open Firefox ''Options'' window (''Preferences'' on Mac or Linux) as follows:
#* In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]] and select ''Options'' for Windows or ''Preferences'' on Mac or Linux.
#* In Firefox 28.0 and previous versions, click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
#In the Firefox Options (or Preferences) window, click the ''Advanced'' tab, then select ''General''.
#In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
#Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Thank you.

What should i do i buy a second hand iphone 4s but its lock to the previous owner in find my iphone pls help me i cant use my iphone for a year already

pls. help me about find my iphone lock. because i buy a second hand iphone 4s but still lock to the previous owner when i restore factory settings still searching for the previous owner of this phone still now i cant use this phone

Hello jimmy ii
The only option is to contact that person to have them remove Activation Lock from the iPhone. They can do it online and do not have to come to you. Check out the article below for more information.
Find My iPhone Activation Lock: Removing a device from a previous owner’s account
http://support.apple.com/kb/TS4515
Regards,
-Norm G.

Using translate function for one to many character translation

Hi friends!
Can anybody tell me whether it is possible to use built in translate function for converting some text from a one alphabet to another one, if these alphabets are of different length. Something like
SELECT TRANSLATE('текст',
'АБВГДЕЕЖЗИКЛМНОПРСТУФХЦЧШЩЭЮЯ',
'ABCGDEF"*GH*"HIJKLMNOPQRSTYVWXYZ') FROM dual;
Or there is another function for this, or it is impossible?
Thanks

Hi,
Maybe you could use REPLACE just once, and then TRANSLATE the rest?
Something like:
SELECT TRANSLATE(REPLACE('ABcDE', 'c', 'xz'),
                 'ABCDE',
                 'abcde') from dual;
TRANSLATE(REPLACE('ABCDE','C','XZ'),'ABCDE','ABCDE')
abxzde
1 row selected.Regards
Peter

Can I use multiple IDs for one iTunes and multiple devices

We have one family computer with iTunes, my older brother has an iPhone and I have an iPhone. A family ID was previously used to purchase songs for the family to share. My older brother has created an apple ID for his iPhone, and l have a yet unused apple ID. my brother downloaded songs etc onto the family iTunes that I would like to share, there are songs on the family apple ID that we would both like. Can you download purchases from multiple apple IDs into one iTunes account, then sync that data onto multiple phones that each have a separate ID? Is iTunes linked to one ID? Can purchases from multiple IDs be grouped together in our family account. Also do I Actually need a separate Apple for my iPhone to prevent private messages and contacts being shared?
Thanks for any advice

I forgot to add my iPhone is brand new and unused, and also that the iTunes account has non purchased songs on there. Can these be shared. As it is a new computer the purchases from the family ID have not been downloaded yet

How to use proxy settings for one website

Hello,
I have to access the only one website using Proxy settings and for others I don't need proxy to access. Is there a way to configure the internet settings to allow one website using Proxy... Please advise. Thanks!
Regards,
Aravin S

I am also getting this "error". The printer (8500 A910) connected to the web well enough that it went out and supposedly downloaded a new update, but then it was supposed to print a page showing the email address, but did not.
So I go in and try to set up the eprint, and it tells me it cannot connect to the sever and I'll need to enter a proxy address and port number. But my ISP's cable modems do NOT have any static IP address nor do they provide any sort of proxy service. Everything works just fine with "automatic discovery" (DHCP) for every computer in the house. No problems there.
So, since that's the case, of course I cannot look up some proxy address and port number in my web browser because they're all set up for "automatically detect settings".
What's baffling is that the printer connected to something at HP to download the "update", and it went through a process that appeared to be what I'd expect it to do if it was updating its firmware. But it won't connect to whatever it's supposed to connect to to have an email address assigned.
Does HP supply a proxy server? If so, what's its IP address or URL, and what port should a person set the printer to try to use?
UPDATE:
It appears that the HP site must have just been "down" for about six or seven hours while I was trying to get the printer to connect because it now connected and I got an email address asigned without needing to have any "proxy" stuff set up at all. It's a shame that the printer does not simply report "HP Site down - try again later" instead of reporting that you need to use a proxy when that's impossible.
"Now, on to the next problem which is that my emails to the assigned address are all bouncing with a "550 5.7.1 Command rejected" error!

Use jar file for one servlet in one application (not global in classpath)

I have a servlet application that needs a jar file to load with one particular servlet. If I put the classpath to the jar file in the jvm12.conf, the servlet loads fine. I can't run it like that, however, since I use another jar file by the same name in a different application. I would like to specify it only with the servlet that needs it. According to the online help file, it says more than one jar, zip, or class file can be specified in the servlet classpath, but that doesn't seem to be the case. We're running iPlanet 4.1. I've tried adding the classpath to the jar file after the classpath for the servlet itself (servlet.properties), but it gives the class not found error for that function. Is there a way to do this? Context.properties, maybe? I can't find any instructions on setting that up.

You might have better luck asking this question on a web server forum. This is an application server forum and most people here are going to more experienced with iAS.
David

Using multiple harddrives for one project

I'm about to purchase a new iMac and Final Cut Studio, and I have a question about harddrive setup. Currently, I have two external 320 GB harddrives I'm planning on using, and the iMac will come with an internal drive of 320 GB. This should be enough space to fit the estimated 468 GB of footage I'll have (36 hrs * 13 GB/hr for HDV is my calculation), but I've heard that there can be problems splitting a project across multiple harddrives. Should I upgrade the internal harddrive on the iMac to 750 GB so I can fit the project all on one drive?
Thanks very much!

Listen to what David said,
don't use your internal disk as scratch disk, it will slow down your system, put it at an unnecessary risk .
Are your drives FW connected or USB? If the case is the latter use your drives as back up drives and for more efficiency get at least FW400 drives and in the future do take into consideration bigger drives, 320 GB when editing video on a regular basis is peanuts.
Here some suggestions:
http://www.CalDigit.com/index.asp
http://www.dulcesystems.com/html/products.html
http://www.g-technology.com/Products/Products.cfm

HOW TO USE J1IJ TWICE FOR ONE DELIVERY

Hi,
I had punched Sales order for 3 line items, i made the the delivery and also did the PGI for the same.
After that when doing the Excise invoice selection thru T.code J1IJ there i had selected only two line items instead of 3 and save the document.
After that created invoice for the same. what has happened was system did the billing for two line items only.
now system is not allowing to do the J1IJ for the item which is left out.
Can anybody resolve this issue.

Hi ,
As because you want single field but not single record so SELECT SINGLE is not correct .
You need to create a internal table with the field of VBELN.
Then you need to fetch the records from the VBELN field of table VBAK.
Try this code --
DATA : t_itab like table of VBAK-VBELN.
parameters : s_vbeln type vbak-vbeln.
select vbeln from vbak into table t_itab
where vbeln = s_VBELN.
Regards
Pinaki

Recommended design for using multiple PGs for one ACD

Ref: ICM 8.5 with Avaya Aura CM 6.3 and AES 6.3
We have been told by Cisco that we should not have more than 3000 agents+CTI on our current PG pair. Since we project we will exceed 3000 agents before the end of the year, we are planning to add another PG pair (with CTI). We have several different lines of business so we just assumed that we should migrate some to be exclusively on the new PG pair. Of course, that means we will also have to Translation Route calls transferred between the LOB.
This set us to thinking that there might be a better way. Does anyone here currently deal with ICM and an Avaya ACD with more than 3000 agents? If so, can you please share your architecture? Specifically, do both of your PG pair share the same AES with different Signal ID? If so, do you share or separate the Switch Links?
Thank you in advance for taking the time to respond.

Thanks for responding, Chris. We are not using CUCM. We have Avaya Aura CM. As such, our Cisco Sales Engineer was quite definitive that our PGs will support 3000 with CTIOS. We do not use CAD.
The dual-PG design was our plan. However, my question is more about whether each PIM needs a separate AES Signal ID and, if so, whether each Signal ID needs a separate CTI link. I know those are more Avaya-specific question but I'm hoping there is someone on here with a similar environment.
I had an additional thought today: It is possible to configure PIMs on two different servers with the same Logical Controller ID such that we would not have to change any Translation Routes. The Services and SkillGroups would still be separate, of course.

I cant use itunes card for clash of clans

dears,
I have $ 100 in my iTunes account, and I want to use for the Clash Of clans game to buy gems, but when i try to buying, pressure wrote a letter to me explaining me that :: Please communicate with itunes support ,,, I'm trying from long time, please help me

Click here and request assistance.
(75825)

Cant use constant selection for ONE restriction in selection

Similar Messages

Maybe you are looking for