Cant use usb keyboards on bootup on P67A-C43 with newest bios

I installed the latest bios for my P67A-C43 and found i couldn't access bios anymore so i plugged in an older ps3 keyboard and got into bios that way,i tried v 1.18 and 1.17 bios and both won't let me use a usb keyboard(tried 2 different usb keyboards)so i went back to bios 1.14 and got my usb keyboard working again in bios,anyone else have this problem with the newest bios and find fix for it?
I'm running a 2600k with 16gb of corsair vengeance ram.

Quote
The reason i flash is for compatibility issues
If an issue is noted, now that you have found the forum, before a flash, many times answers may point to something other than a UEFI/BIOS problem. Anyway, if you have the Intel ME driver, chipset driver, and USB Renesas 3.0 driver installed, there are no UEFI/BIOS settings other than enabling all the USB 'enable' options. In this situation, when a keyboard did work, and then didn't with a flash to a newer release UEFI/BIOS, MSI needs to be made aware of this so they can address it in an upcoming release. Again, if there are no compatibility issues experienced with an existing/older UEFI/BIOS version, there is no practical reason for flashing. It is not a driver.
If and when a flash is required, please use the forum's USB flasher found here at this link;
https://forum-en.msi.com/index.php?topic=108079.0
After a flash, it is also recommended to do a full battery removed CMOS clear and reset.

Similar Messages

I have a macbook pro. i think i might have pushed some buttons that made my macbook look for a wireless keyboard.. i dont have any wireless keyboard. and now i cant use the keyboard on my macbook. how can i get the normal keyboard staring?

i have a macbook pro. i think i might have pushed some buttons that made my macbook look for a wireless keyboard.. i dont have any wireless keyboard. and now i cant use the keyboard on my macbook. how can i get the normal keyboard staring?

korgba wrote:
it pops up a script were it says that the macbook cannot find a bluetooth keyboard, and it isnt a keyboard connected
For some reason, your Mac doesn't recognise that a keyboard is present, so it looks for a wireless keyboard. The question is, why doesn't your Mac recognise that a keyboard is attached?
First, you need to make sure you remove all peripherals, especially USB peripherals (the keyboard is on the USB bus). Then restart holding down the Shift key. This should boot in Safe mode. If the computer boots normally (not in safe mode) and the keyboard is still not working, try resetting the SMC
Intel-based Macs: Resetting the System Management Controller (SMC)
<http://support.apple.com/kb/HT3964>
If that still doesn't fix the problem, then the keyboard (or its controller) is probably damaged and needs to be replaced.

The keyboard shortcuts on the pull down menus are grayed out. So I cant use my keyboard to (for instance) open up a new tab. This is the case for all keyboard s

The keyboard shortcuts on the pull down menus are grayed out. So I cant use my keyboard to (for instance) open up a new tab. This is the case for all keyboard s

Mine appear in gray, too; I think that's just the style.
Does this problem occur on all pages? (If it only appears on YouTube or other pages with Flash players, it may be related to keystrokes being captured by the plugin.)
A standard diagnostic for possible interference by add-ons is to try Firefox's Safe Mode.
First, I recommend backing up your Firefox settings in case something goes wrong. See [[Backing up your information]]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, restart Firefox in Firefox's Safe Mode ([[Safe Mode]]) using
Help > Restart with Add-ons Disabled
In the Safe Mode dialog, do not check any boxes, just click "Continue in Safe Mode."
If your keyboard shortcuts work correctly, this points to one of your add-ons or custom settings as the problem.
Any change?

Bootcamp cant use USB stick to download drivers.

My Macbook Pro cant seem to use the USB stick to download the drivers for Windows. I have install Windows on a new partition but cant use it since the machine does not talk with the software without the drivers.
Every time I try to download them, it tells me ''Unable to save the Windows support software on the selected disk. An error occurred while saving the Windows support software.'' (English translation from French).
Went twice to the Genius Bar, lost my time twice and I dont really know what to do.

Good Afternoon Juliendls,
The resources below will explain how to setup Boot Camp using a USB. What version of Windows are you trying to install? Is it possible that you have not formatted the USB media for Windows?
How to install Windows using Boot Camp - Apple Support
https://support.apple.com/en-us/HT201468
Frequently Asked Questions about installing Windows 7 with Boot Camp - Apple Support
https://support.apple.com/en-lb/HT202008
Where can I get the Windows Support Software (Windows drivers)?
Use Boot Camp Assistant to automatically download the software for your Mac and the versions of OS X and Windows you are using. Refer to System requirements for Microsoft Windows operating systems for more information.
How do I use the Support Software I downloaded from the web page?
The download file is a .zip file. Double click it to uncompress it.
Copy the Support Software to the root level of a USB flash or hard drive that is formatted with the FAT file system (see question below for steps on how to format).
Attach the hard drive to the USB port of your Mac after Windows 7 is installed.
Double-click the Boot Camp folder, then locate and double click the "setup.exe" file.
Installation of the drivers can take a few minutes. Don't interrupt the installation process. A completion dialog box will appear when everything is installed. Click Finish when the dialog appears.
When your system restarts your Windows 7 installation is done.
How do I format USB media to the FAT file system?
Use Disk Utility to format a disk for use with a Windows computer.
Important: Formatting a disk erases all the files on it. Copy any files you want to save to another disk before formatting the disk.
Open Disk Utility.
Select the disk you want to format for use with Windows computers.
Click Erase, and choose one of the following from the Format pop-up menu:
If the size of the disk is 32 GB or less, choose MS-DOS (FAT).
If the size of the disk is over 32 GB, choose ExFAT.
Type a name for the disk. The name’s maximum length is 11 characters.
Click the Erase button, and then click Erase again.
Hope that helps ...
- Judy

Cant use more than one authorization group per report with SBO CR Basic

Cant use more than one authorization group per report with SBO CR Basic.
I have installed on SAP Business One SBO 2007 SP00 PL49 the Crystal Reports Basic 2.0.0.7.
i have defined two users, manager and supervisor.
I have defined two groups, M and S.
Manager belongs in managers (M), and supervisor is assigned to the supervisors (S).
i enter to one report, disable the public option to enable group authorization, and then check M group.
Manager can see the report, but Supervisor is not allowed. So far good.
Then i uncheck M, then check S in the report properties, and Manager cant get in, supervisor opens the report, So far good.
But when we check both Groups or more, only the M group authorization appears to work, and S group users cant acess, even the report is allowed for that group, also happens with all the groups appart the first (2nd, 3rd, 4th, etc.).
It seems that a report can manage a single group, but i have to be shure to tell this to the customer.
So far we have included all Manager users to the S group in order that only S group is used and authorized users can use, but this is duplicating user participation in groups, and it would be much easier to check the desired groups for a single report.

Cant use more than one authorization group per report with SBO CR Basic.
I have installed on SAP Business One SBO 2007 SP00 PL49 the Crystal Reports Basic 2.0.0.7.
i have defined two users, manager and supervisor.
I have defined two groups, M and S.
Manager belongs in managers (M), and supervisor is assigned to the supervisors (S).
i enter to one report, disable the public option to enable group authorization, and then check M group.
Manager can see the report, but Supervisor is not allowed. So far good.
Then i uncheck M, then check S in the report properties, and Manager cant get in, supervisor opens the report, So far good.
But when we check both Groups or more, only the M group authorization appears to work, and S group users cant acess, even the report is allowed for that group, also happens with all the groups appart the first (2nd, 3rd, 4th, etc.).
It seems that a report can manage a single group, but i have to be shure to tell this to the customer.
So far we have included all Manager users to the S group in order that only S group is used and authorized users can use, but this is duplicating user participation in groups, and it would be much easier to check the desired groups for a single report.

Using USB Keyboard and Mouse with S6000-f Ideatab

First you need a Microusb to USB adaptor pluged in, then plug in a usb hub I'm using a 4 port unpowered mini hub
then plug in a usb keyboaed and mouse.
it works good in Kingsoft office and AndrOpen office or any app that needs you to type
it does disable the touch pad keyboard, until you unplug the usb keyboard. It's alot cheaper than a blue tooth keyboard
I'm using a Samsung micro usb to usb connector model EPL-AU10WEGXAR
Keyboards tested: Dynex usb and Acer usb
Mouse tested: Kingston usb
Any usb keyboard and Mouse should work.
Also I tested a Thumb drive. Sandisk 8gig it shows up in the file manager .
So you dont have to use a MicoSD card. The one thing back up and restore only uses the MicroSD card slot.
I havent found out how to change that yet.
I dont think any of this is in the Manual I just like to share useful Info.

hi jpwes,
This is Great! This can help a lot of users of the same model,
Nice and Solid review here!
Thanks
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Using USB keyboard with Camera Kit

Is it possible to connect a USB keyboard to my Ipad using the USB camera connector?

This has been discussed here http://discussions.apple.com/thread.jspa?threadID=2601824&tstart=15
You may be able to find a USB keyboard that will work, but best bet is to use bluetooth. The power requirements are pretty high for the USB keyboards.

Can't Use USB Keyboard on Boot

Hi,
I have a 865G. The first time I started up after putting the computer together I could not get into the BIOS setup. The USB keyboard doesn't work. I had to use my old PS/2 keyboard to start setup.
I flashed to bios 1.2 and all was well. I just went to bios 1.3 and it won't see my keyboard. I had to set the onboard peripherals USB Legacy to ENABLED in the old versions.
I have a Microsoft Natural Pro keyboard and a USB Intellimouse Explorer. Both work just fine when I am in Windows XP. The BIOS stops after the screens where they show the hardware setup - just like there was no keyboard.
I am going to reflash back to 1.2. Please let me know. ;(
Thanks,
SS

When it was new, with bios 1.1 it didn't recognize the keyboard. I had to set that setting with the old keyboard. I flashed to 1.2 and hoped that it was fixed. It's frustrating when the keyboard works sometimes and not others when you are at the CMOS level. Win XP is OK.
Anyway, I did set the choices of USB LEGACY DEVICE to KEYBOARD AND MOUSE. But that didn't work in the newest 1.3 versoion of the bios.
Also, I didn't install a floppy. I burned the information to a CDRW and used a Win 98 install disc to boot with CD support.
Thanks for trying,
SS

Use USB keyboard instead of bluetooth keyboard

New iMac. OS X Lion. USB keyboard preferred. bluetooth keyboard absent. The computer searches forever for the missing keyboard.
If I unplug the USB keyboard and re-insert the plug, the computer recognizes the keyboard and everything is fine. It won't just recognize the USB keyboard without all this hassle. What solution might there be for this?
Thanks
Cliff

Kappy
I started in the bluetooth preferences, clicked advanced and based on the presentation given there
I de-selected the checkbox that read "open bluetooth setup assistant at startup if no keyboard detected".
That "is" the solution. The warningt there was that one "should have an alternative keyboard attached".
WOW
Thanks

I cant use the "google search" button but no proble, with internet explorer. The" feeling lucky" works.

i cant use the "google search" button with firefox 3.6.6 or even 3.5. I have no problem with searching google on internet explorer. The" Im feeling lucky" button works. The google search tab on the top right corner of firefox browser works fine. But the main google search button on the google site doesnt work. I havent changed anything. i cant do anymore google searches.
== URL of affected sites ==
http://www. google.com

When click on search, the Google search result didn't update (the google search page didn't change). BUT the url bar on top did have the Google URL updated with the new search term.
Something like
http://www.google.com/#hl=en&q=firefox+3.6+problem+with+google+search+button&aq=f&aqi=&aql=&oq=&gs_rfai=&fp=dd2d1939af06a5a
So the URL is changed when I click the Google SEARCH button on the page. Just the page not changed nor updated.
And when I click "Reload current Page", then the page is reloaded with the new google search result.

Cant use some funtions in firefox but still work with internet explorer, too long to explain in one ssentence

recently I have found that certain buttons on sites like facebook and others will not function when I am using firefox but if I use internet explorer those same buttons work fine. one example is the log out button in facebook. you can click on the command button all day but nothing happens. First thought this was a facebook issue but noticed certain command buttons did not work in other sites as well. Went to i.e. and everything works fine what has happened

'''Try the Firefox SafeMode''' to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode#w_safe-mode-window_2 Troubleshoot Firefox issues using Firefox SafeMode]
When in Safe Mode... <br />
* The status of plug-ins is not affected.
* Custom preferences are not affected.
* All extensions are disabled.
* The default theme is used, without a persona.
* userChrome.css and userContent.css are ignored.
* The default toolbar layout is used.
* The JIT Javascript compiler is disabled.
* Hardware acceleration is disabled.
* You can open the Firefox 15.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

MOVED: P67A-C43 with the 5.4 drivers, R9 290 won't POST

This topic has been moved to Older MSI motherboards.
https://forum-en.msi.com/index.php?topic=256759.0

Quote from: awolf001 on 21-June-15, 22:01:19
After reading tons of things, I got the BIOS updated to 5.4 and installed Intel ME 8 as well.
The bios versions for P67A-C43 are named 1.x. Latest is 1.J aka E7673IMS.1J0
Confirm the board model and bios version as well as listing complete specs following >>Posting Guide<<

P67A-C43 with the 5.4 drivers, R9 290 won't POST

Hello,
After reading tons of things, I got the BIOS updated to 5.4 and installed Intel ME 8 as well. This item will not get past BIOS and it is just a black screen upon turning on the computer. It is an Sapphire Tri-X R9 290.
The fans do move on the R9 290, so it has power of course.
Any ideas? I am pretty sure it is something with the motherboard, but maybe the video card has to be RMA?
Please confirm the correct ME 8 drivers for me too.
Note: My old card, Radeon 6850, works fine still when putting it back in

Quote from: awolf001 on 21-June-15, 22:01:19
After reading tons of things, I got the BIOS updated to 5.4 and installed Intel ME 8 as well.
The bios versions for P67A-C43 are named 1.x. Latest is 1.J aka E7673IMS.1J0
Confirm the board model and bios version as well as listing complete specs following >>Posting Guide<<

Trouble using USB keyboard with GarageBand

I have a Yamaha DGX-305 keyboard with a USB out. I want to record the real instrument using GarageBand, rather than using MIDI input. Is this possible? GarageBand isn't recognizing the keyboard when I simply plug it in. I've downloaded what looks to be the appropriate driver form the Yamaha site. It sounds like some keyboards are set up for plug-and-play. Is there a way I can get this to work where GarageBand records the real instrument via USB? Thanks.

I've downloaded what looks to be the appropriate driver form the Yamaha site.
But maybe it's not the right one. Is it this one?
When you go to GB's Audio/Midi prefs, does it detect 0 midi devices or 1?

When i plug in my iphone to my pc using usb cable and share my personal hotspot with the computer Why the computer ask me to choose a type of network like home public,work? the name of the connection is "network whatever 9" and tomorrownetworkwhatever 10

plis help me with this, is like my pc is not recognize the iphone like an usual connection network, always ask me the type of connection network like the first time i plug in my iphone i see this since the new iphone software update to ios 5
sorry for my english im still learning

Right, more information:
Its definitely Itunes not my ipod. Problem does not exist on a windows xp machine I plugged my ipod into.
I have created a new user on my vista machine and this has not worked. I am just about to uninstall quicktime and itunes and all other apple products from my machine to resinstall them (I will also do a registry clean after the uninstall) I'm getting really fed up with this. There must be a better way of sorting out this problem than this. What actually is causing the issue. Do apple have support guys on this forum?

Cant use usb keyboards on bootup on P67A-C43 with newest bios

Similar Messages

Maybe you are looking for