Cant use VPN on LAN but can on WIFI
Hi
I am curently running 10.8.2 and when connected to the metwork using a LAN cable I cant use any of my VPN connections...
But when I disconnect form the LAN and turn on WIFI all VPN's work???
Any ideas?
From the menu bar, select
▹ System Preferences ▹ Network
If the Network preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Select the Ethernet connection, then click the Advanced button and select the Hardware tab. Select
Configure: Manually
and
MTU: Custom
Enter an MTU value of 1280.
Click OK and then Apply. Test.
You must apply the change before it takes effect.
If the issue is resolved, experiment with higher MTU values until you find the highest one that works. The higher the MTU, the better the network interface will perform.
If changing the MTU has no effect, restore the Configure setting to Automatically.
Similar Messages
-
keeps telling me to install silverlight but I already did
The fix is, after installing Silverlight, go to Tools / Add-ons, click on Plug-Ins and select the pulldown "Always Activate" next to Silverlight Plug-In. It looks like Firefox is not wanting to activate Silverlight by default.
-
Cant login using internet explorer 9 but can using...
I cant login using internet explorer 9 but can using other browsers such as mozilla and google chrome on my laptop.
The problem is only on my laptop as i can login on my desktop pc .
I keep returning to the login page everytime I submit my details.
Solved!
Go to Solution.You could try clearing cookies and cache - see here for how http://kb.wisc.edu/page.php?id=15141
Can't think of much else I'm afraid - don't actually use IE (or windows) that much myself. -
HT4993 i have i iphone 5 sprint but i cant use in my country how can factory unlock.
i have i phone 5 from usa sprint i cant use in my country how can factry unlock.
Hello there, Parbati.
Unlocking can only be performed by your Carrier (Sprint). Apple has a good resource page that should help you find out if that option is available for your area:
iPhone: About unlocking
http://support.apple.com/kb/HT5014
The following is great information to use as a guideline:
Follow these instructions to unlock your iPhone:
Check if your carrier offers unlocking. Only your carrier can unlock your iPhone.
Contact your carrier and request an unlock.You may need to meet certain requirements to qualify for unlocking. This may take up to seven days.
Once you receive confirmation that your iPhone unlock has been processed, back up your iPhone.
Erase the contents of your iPhone.
Complete the setup assistant and restore your backup.
Thanks for reaching out to Apple Support Communities for answers to your question.
Cheers,
Pedro D. -
Trying to access my 851w from outside my lan, but can access inside fine
Hi,
I purchased a 851w to use as my home router and to learn more about the cisco IOS. I have been spending some time studying for CCENT/CCNA and so far I have enjoyed learning as I go. However, I am having problems accessing this router from a remote location via ssh. I can access it just fine from my lan, but not outside it from another location. Currently, I am not using this router for internet access or anything else other than learning about the IOS, and it is connected to a basic dlink wireless router dir-615. I have port forwarding setup on the dlink that any traffic coming in on port 22 is directed to the 851w at 192.168.0.150. I also have the 851w connected with a crossover cable to a switch that is connected to the dlink router.
Like I said, I can connect just fine from my lan, but can't connect from outside. I have tried a few different things but nothing works. I also use Teraterm to connect, but have tried Putty too. I also use ddns to access it, but I have also tried the wan ip address of the dlink with no luck.
Could someone please take a look at my very basic running config and explain what I might need to do different?
Thanks in advance.
SeanHi and thanks a bunch for your quick response.
No, I can't ping anything other than my main router which I have setup as the gateway so why is that? For example,
ip default-gateway 192.168.0.1
Wouldn't it automatically send anything it doesn't know about to the 192.168.0.0/24 router?
I have one of the switch ports, Fast Ethernet 0, connected to another switch connected to the dlink router. I have tried different ports but it didn't change anything. I don't have anything connected to the wan port of the 851w. I was trying to simulate remote access of a switch on an internal network. My next step would be to make the 851w my default router and then try to access it from the outside, but I wanted to succeed this way first.
optimus#show ip int br
Interface IP-Address OK? Method Status Protocol
Dot11Radio0 unassigned YES unset administratively down down
FastEthernet0 unassigned YES unset up up
FastEthernet1 unassigned YES unset down down
FastEthernet2 unassigned YES unset down down
FastEthernet3 unassigned YES unset up down
FastEthernet4 unassigned YES unset administratively down down
Vlan1 192.168.0.150 YES manual up up
Yes, my internal pc is on the 192.168.0.0/24 subnet.
Best Regards,
Sean -
Hi, does anyone know why I cant send email over 3g but can over wi-fi. My provider is ntlworld. As soon as I get home and connect to wi-fi the mail sends no problem
We use ntlworld as our home broadband provider and main email address. In my experience ntl doesn't usually allow sending of email except on its own network which is why yours works at home. My iPhone is set up to send my ntl email using my second email account's smtp setting (in my case is is a mac.com account and I haven't found any network this doesn't work on to send email).
So my advice is to get yourself another email account with a different provider like yahoo or google, then use the new provider smtp address to send your ntl email on your iPhone. -
How do I pay for my storage plan when I don't have a credit card? Last year I used an iTunes voucher but can't find that option this year. Please help!
Create an iTunes credit by redeeming a gift card and it will be charged to your credit. From http://support.apple.com/kb/ht4874:
"payment methods accepted include iTunes store credit, credit cards, and debit cards" -
I have replaced my ibook hard drive but when I start up I get a folder with a flashing question mark. I have tried installing the OSX disk using the "C" key but can't get any further than the flashing "?." What do I do? What is the problem?
Which iBook do you have?
http://support.apple.com/kb/HT1772?viewlocale=en_US
Which version of the OS is installed, and which version are you trying to install?
You could try starting up with Startup Manager and see if it will allow you to select the OS X install disc as the startup disk. If so, maybe you can proceed from there. I would recommend repairing the hard drive first since you are evidently having a bit of a problem with it. -
I'm using Mail 7.3 but can't find a "Block Senders" option - as exists in Outlook - as a way to prevent repeated spam and advertising landing in my Inbox. Anyone have a solution for this? I've had a look at the Message Rules option but that doesn't seem to offer a fix. Thanks
You should be able to manage the problem with Rules, if you are happy to just delete the emails without you ever seeing them.
In Mail>Preferences>Rules, create a new rule with these options:
Description: Give a name to the Rule, such as Delete or Block Sender
On the line started 'If' choose 'Any' from the drop down menu and on the next line select 'From' and 'Contains', and then input the email address of the unwanted sender
Under 'Perform the following actions' choose 'Delete'.
As other senders you want to block send you unwanted emails you can add them to the rule by clicking the '+' sign against the line you added the email, if you have an email from that sender on screen when you edit the rule - they should appear there automatically. -
My iPhone cannot sync wif computer... But can charge wif 3pin plug charger..
When you plug your iPhone into your PC and hear the sound does your iTunes show up on your computer? I would suggest a couple of things...........first, re-download iTunes...then try connecting your iPhone USB connector to your PC. If iTunes opens but it does lot list your phone As being connected.....................un-plug your iPhone ....and then re-plug it in (I have to do that often). If none of that works, try a hard reset of your iPhone (by holding the "sleep" and "Home" buttons until you see the white Apple logo) and then try connecting again. Let me know if this helps.
Message was edited by: julieda -
Cant Ping UC320W from 881 but can ping 881 from UC320w
Hi,
Wondering if soembody could help me here. I have a uc320 and router directly connected and I can ping the router from the 320 but cant ping the other way. As a result I only have SIP traffic working outbound but cant get and calls inbound. Im missing something here but cant figure out what
Any ideas ?
Thanks a million
J-PHi,
Thanks for the response. The UC320 has the WAN Interface is statically assigned 192.160.160.2/30 and the gateway is
192.160.160.1 there is no CLI on the 320 so cant provide any config. I can ping the 881 from the 320 no problem but it wont work the other way. Evrything looks like it up and running from show commands etc.
The config of the 881 is below have changed the wan address's etc for obviuos reasons -
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname _Router
boot-start-marker
boot-end-marker
logging message-counter syslog
no aaa new-model
dot11 syslog
ip source-route
ip cef
ip name-server 83.147.160.2
ip name-server 83.147.160.130
no ipv6 cef
multilink bundle-name authenticated
archive
log config
hidekeys
class-map match-any VOIP
match protocol rtp audio
class-map match-any WEB_TRAFFIC
match protocol http
match protocol ftp
match protocol secure-http
match protocol secure-ftp
class-map match-any VIDEO
match protocol rtp video
policy-map QOS_POLICY
class VOIP
priority percent 15
set dscp ef
class WEB_TRAFFIC
bandwidth percent 30
random-detect
set dscp af32
class VIDEO
bandwidth percent 20
set dscp cs4
class class-default
bandwidth percent 30
random-detect
set dscp default
interface FastEthernet0
switchport trunk native vlan 100
switchport mode trunk
interface FastEthernet1
interface FastEthernet2
interface FastEthernet3
switchport mode trunk
interface FastEthernet4
bandwidth 5000
no ip address
speed 100
full-duplex
service-policy output QOS_POLICY
interface FastEthernet4.201
description Voice_VLAN
encapsulation dot1Q 201
ip address 172.18.24.x 255.255.255.252
ip nat outside
ip virtual-reassembly
interface FastEthernet4.202
description DATA_VLAN
encapsulation dot1Q 202
ip address 92.51.19.x 255.255.255.252
ip nat outside
ip virtual-reassembly
interface Vlan1
ip address 192.168.160.1 255.255.255.0
ip nat inside
ip virtual-reassembly
interface Vlan100
ip address 192.160.160.1 255.255.255.0
ip nat inside
ip virtual-reassembly
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 92.51.19.X
ip route 172.18.24.x 255.255.255.255 172.18.24.x
no ip http server
no ip http secure-server
ip nat sip-sbc
ip nat inside source static udp 192.160.160.2 5060 interface FastEthernet4.201 5060
ip nat inside source list 1 interface FastEthernet4.201 overload
ip nat inside source list 2 interface FastEthernet4.202 overload
access-list 1 permit 192.160.160.0 0.0.0.255
access-list 2 permit 192.168.1.0 0.0.0.255
banner login
Thanks again
J-P -
Cant load facebook zoo game but can in explorer
cannot load zoo game in firefox but can in explorer
== URL of affected sites ==
http://zoo worldIt is possible that you clicked "Block Images" in the right click context menu while trying to save an image.
Check the image exceptions: Tools > Options > Content: Load Images: Exceptions - See [[Options window - Content panel]]
*A way to see which images are blocked is to click the favicon (<i>Site Identification</i> icon) on the left side of the location bar.
*A click on the "More Information" button will open the Security tab of the "Page Info" window (also accessible via "Tools > Page Info").
*Open the <i>Media</i> tab of the "Page Info" window.
*Select the first image and scroll down though the list with the Down arrow key.
*If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain. -
Urgent! wireless on mac pro but can connect wifi on ipad
Hi
please help out.
there is no wirless icon on mac pro top bar, but I can find wifi on my iphone and ipad
urgently need to find wirless on my proThe AirPort icon should be in the upper right portion of the screen, but you have to turn WiFi on as well, if it is not turned on.
-
Help
Dear brothers
Thanking you so much to be interested about my answer but what I figured out is as long as you bought your iPhone from gulf or Arabian area it will not has face time application cause I think apple has made special software for Arabian areana to privent facetime according to special request by phone cells companies and one of my friends has told me if you want to make sure that your iPhone not for Arabian areana you should check the model number on your iPhone backside if it ends with 29 it means it's for Arabian countries if other numbers it's gonna be for US. Or Hongkong so it's ok
That's all I could know if you have another solution just please let me know
Thanks for all answers -
AnyConnect - cant access router's lan, but everything else is reachable.
Hello,
i have a strange problem which i am trying to resolve, but i have run out of ideas.
I have a router on which i have Anyconnect as RA , and DMVPN to form S2S vpn with other locations.
I can successfully connect to router via anyconnect, it will push a routing to the clients ok. I can ping all router interfaces, and even the remote lans.
But i cant ping any computer on local lan of the router. Its not the problem of the firewall on router (zbf) as i have tried to disable it completely with no effect.
I have also tried to connect via anyconnect to other router in the dmvpn network and i can access my local lan.Hmmm, i have added access-list 105 deny ip 192.168.5.0 0.0.0.255 192.168.5.0 0.0.0.255
just to be sure but it does not fix the issue.
Which is expected from my side as the anyconnect vpn pool is " ip local pool SSLVPN-POOL 192.168.5.200 192.168.5.210 and svc address-pool "SSLVPN-POOL" netmask 255.255.255.0
" . As my local subnet is 192.168.5.0/24 it is in the same subnet so there should not be NAT taking place. Or am i mistaken somewhere ?
I do not have ip nat inside statement on virtual-template1 also.
Will try to extend the SSLVPN-POOL to the whole subnet or changing the subnet for it, to see if this has any effect.
Maybe you are looking for
-
DDLIMP utility is failing while running the DDL_OLTP.ctl script for Siebel
DDLIMP utility is failing while running the DDL_OLTP.ctl script for Siebel source on DB2. Below is the the log details: 2021 2012-11-08 03:23:46 2012-11-08 03:25:56 -0700 0000002a 001 003f 0001 09 ddlimp 604 736 C:\OBIA\Upgrade\CTLFiles\DDL_.log Cont
-
How to get to the first unread post in a visited topic.
The title seems self-explanatory. Also, is there a way to see in the discussions lists, those we have posted in? Thanks, and happy new year!
-
Audio line -in : doesn't seem to be responding
Hi My audio line-in port doesnt seem to be working any more. Does anyone have any advice to help me trouble shoot this issue. Ive already tried third party recording apps and a new set of mic-headphones but still nothing appears to be coming through.
-
[svn] 2155: Merging change 2154 from trunk to 3.0.x
Revision: 2155 Author: [email protected] Date: 2008-06-19 18:55:54 -0700 (Thu, 19 Jun 2008) Log Message: Merging change 2154 from trunk to 3.0.x * My mistake, I should have committed the change to 3.0.x, and then merged to trunk * For bug SDK-15589 B
-
Any one else have this problem?
From what I found out in the regular Support topics, when you plug your iPod into a computer for the first time, a little SetUp page is supposed to appear where you give the iPod a name, and such. My computer never did this. All I got was a page that