Cant use x2-01 as usb modem..

Facing problum to use mobile as modem. I have pc suite ovi suite cant use that.if i connect mobile to pc errore shows on mobile 'no responce from host' plz help me.
I am using nokia x2-01.

Hi Ganeshsal5100
Try to update the software of your Nokia X2-01 using Nokia Suite, for guidance on how to perform the update refer on this link. After the software update check if you can use your phone as a modem.
If my post helped you, please don't forget to click on the "White Star" and if it resolved your issue click on "Accept as Solution"

Similar Messages

  • How to use 3110 as a usb modem in Mac

    I use 3110 as a usb modem in my Mac,but it can't work,the Mac can find two usb modem when I plug my 3110,each can't work,I see the log find my modem no responses for the AT command,so it can't work,my phone is good,beacuse I can use it in Windows as usb modem, and I also can use bluetooth modem in Mac,after modify isyn ,I can use isyn when i use bluetooth but can't work when i use usb cable,and I hope i can use usb modem ,is anybody use 3110 as usb modem?thank's your help!

    Hi,
    Listed below is the step by step intructions to configure the Nokia device as a modem to a mac.
    Steps:
    Connecting your Mac to the internet is convenient and easy with your a compatible Nokia S60 device. You'll need a Nokia S60 device that supports a 2G or 3G data connection (such as GPRS or HSDPA), a compatible Mac (with the latest OS X), a USB cable for your Nokia device or a Bluetooth-enabled Mac, and a network subscription with your mobile service provider.
    To set up your device you'll need to know your operator's Access Point Name (APN) and have the packet data service enabled. For help with this please contact your operator.
    In Settings select and open Connection >Select and open Packet data > Select and open Access point >Type in your operator's Access Point Name
    Exit Settings. Your device is now ready to be used as a modem for your Mac!
    Bluetooth Connection: Pairing between Mac and Device using bluetooth, follow the instruction from here: http://europe.nokia.com/get-support-and-software/download-software/device-as-a-modem/connect-to-your...
    Note: Preferred mode is USB as it much faster than Bluetooth.
    Connect the device and then go to System preferences- >Network- >Select Device (Nokia XXX)
    Click on Advanced Tab > Modem tab
    - Vendor : Nokia
    -Model:GPRS (GSM/3G)
    -Telephone Number: *99***1# (contact your operator to get this settings)
    -APN: airtelgprs.com (contact your operator to get this settings)
    CID: 1
    Once connected it will be highlighted in green.
    Hopefully this helps.
    Cheers
    Sandy
    Message Edited by sandy2410 on 30-Mar-2009 04:52 AM
    Helpful information, then dont forget to hit the kudos star :-) Or say it accepted solution and thanks

  • Could my ipad2 connects to the Internet using SIM card or USB Modem?

    Could my ipad2 connects to the Internet using SIM card or USB Modem?

    If you have a 3G iPad, it can connect to the internet using cellular data. As the iPad has no USB port, you can't connect a USB modem. You can use what is called a MiFi, though. They connect to cellular service and create a personal WiFi hotspot.

  • Cant use by WLAN an USB Printer connected to Router

    Hello, Please help my by solving this Problem. I have connected a USB Printer to a Router. The Router recognizes the Printer an shows a Connection. But I cant use the Printer from my MacBook Pro by IP over WLAN. Can somebody help?

    Hi ColinR,
    Looking at the specifications of your BT HomeHub 3 I see that it does not support MAC spooling. To test for sure we can try connecting the printer directly to your Mac which would prove that the printers network function along with the USB function are working.
    We need to restore your network defaults. On page 129 of your User Guide it explains how to restore the network defaults
    To reset the printer's network settings
    1. Touch (right arrow), touch Setup, and then touch Network. Touch Restore
    Network Defaults, and then touch Yes. A message appears stating that the network
    defaults have been restored.
    2. Touch (right arrow), touch Setup, touch Reports, and then touch Print Network
    Configuration Page to print the network configuration page and verify that the
    network settings have been reset.
    Then follow these steps to connect your printer directly to your computer.
    Put the computer on the printers network (temporary)
    Click on the air port symbol on the top left side of the Mac screen
    Choose the network that look relative to the printer (might say HP setup or some variation of the printer name)
    Find the IP address on the test report we printed.
    Open an internet browser (Safari) and enter the IP address into the URL (address bar).
    Click on the network tab, on the left click on wireless or 802.11.
    At this point we are looking for "start wizard" should be on the right hand side.
    Once we have successful configured the printer for your network you can put your computer back on your network. Now you can add the printer to the system preferences and print.
    Let me know how it goes.
    Thank you,
    I worked on behalf of HP.

  • Using Pantech 4G LTE USB Modem with Chromebook

    Got a Chromebook for Christmas, but I don't have wi-fi at home.  I do have the UML290 modem for my windows laptop.
    Can I install VRZ manager on Chromebook, and use the USB modem on it to connect to the internet?
    TIA
    Rick

    No!  Chromebook uses Android OS, you will a CradlePoint MBR95 or Pepwave Surf on The Go Router to insert the UML290 and then you can use the built in wifi in the Chromebook to connect to the router and get internet access.
    You can get the gear at 3gstore
    Here is some Reviews on the MBR95 works like a champ
    http://3gstore.com/product/3029_cradlepoint_mbr95.html#Tab2

  • Using cell phone as a 3G USB modem for Leopard

    Hi All,
    I just get an MacBook Pro the last week, I was happy with the UI of the OS at first sight, but when come to the setting of the network, I am really frustrated.
    I get a SE P1i cell phone, I would like to use it as a usb modem for my MAC so that I can have 3G internet connection when on the road. But the problem is that, I can't connect it to my MAC at all!
    Leopard can regonize my phone but it seems that none of the modem script(including the SONY ERICSSON script pre-installed) work for my phone. when I checked in the activity log, I see that the result of running every modem scripts are
    "CCLExit: -6019 (Modem error, modem not responding.)"
    I guess it should not be the problem of my phone as I try using SE K800i, the same result...
    although I know that I can use the bluetooth rather the USB cable to connect them together, I would prefer USB cable as it is faster and more secure.
    anyway, any help would be appreciated.

    detailed instructions:
    http://blog.evandavey.com/2008/02/how-to-connect-huawei-e220-usb-modem.html
    scripts (and instructions):
    http://www.taniwha.org.uk/
    (generally I understand one does the same as with a bluetooth phone, but plugs in the usb cable and skips the bluetooth part)

  • Does The Apple USB Modem Work With The Mac mini ??????

    Just wanted to know if anyone has successfully used the new Apple USB Modem with the Mac mini, is it compatable ????
    Thank you for your input on this.
    Mike D.

    It says it works with the Mac mini, but does it really? I just received my modem yesterday and could not get it to work with my 1.42 mini - the more expensive one that comes without a dialup modem! I looked carefully at the specs and it appears the Apple USB modem requires Mac OS 10.4.3, not the 10.4.2 that comes with the Mac mini.
    Talk about stupid! And the mini docs say it comes with the "latest" version of Tiger. Not! So I can download the upgrade, I guess. IF I could get on the internet! This is extremely annoying. I guess I'll have to download the upgrade on another computer and transfer it somehow. Boy, those Apple guys sure are tech geniuses, aren't they???
    [ Edited by Apple Discussions Moderator ]

  • Nokia 6120 Classic USB Modem is not working proper...

    Hello everybody!
    Something strange happened last week with my Nokia 6120 Classic (version: 03.83). I regularly use it as a USB modem and last week's Wednesday it stopped working. What the problem really is due to, is hard for me to say precisely.
    Using Windows Vista (Business, x64, SP1) "Connect to" function, I have previously connected to using HSDPA, but after last week the following happens:
    Starts with "Dialing" then goes to showing status "Verifying user name and password" for less than a second after which Vista informs that "Failed to connect to..." and the phone shows the 3G symbol with dashed arrows below.
    I've tried the following:
    - reinstalling PC Suite (the latest, greatest version)
    - reinstalling the modem drivers (between Nokia USB modem and 6120 USB modem) using the whole reboot thing
    - using another USB port, which doesn't work since Device Manager reports that the driver can't start properly
    - restarting, cold resetting the phone
    - switching to GSM only
    - testing with another computer running SP1
    - removing modem init commands for the Internet connection
    Now, the strange thing with the second computer was that everything worked just fine with it. My computer on the other hand didn't work at all!
    I've put the modem communication logs from the working computer here:
    http://docs.google.com/Doc?id=ah8pw9pjrf55_12g38wqpdt
    And the modem communication logs from my non-working computer here:
    http://docs.google.com/Doc?id=ah8pw9pjrf55_11hjcq39g4
    What was interesting on my computer is the "NO CARRIER" line which makes no sense to me: why on earth is it starting to check for a carrier signal all of the sudden??
    Any tips with this here dilemma would be greatly appreciated.
    Message Edited by manywhere on 18-Feb-2008 09:47 AM

    I tried using a Nokia E90 and connecting to the net using both PC Suite's "Connect to the Internet" and using Windows´ "Connect to" programs. With the E90, I had the same problems: fails at "Verifying user name and password" and the strange looking modem communications log.
    What the heck is going on with my Windows installation here? I tried removing the drivers again, repairing PC suite and restarting the computer, but to no avail.

  • Wireless USB Modem connection problem on MacBook Pro

    I am running os x 10.8.2 on my macbook pro and am trying to connect to the internet using an alltel Wireless USB Modem (manual found here: http://pcdphones-client.s3.amazonaws.com/files/709/Alltel_English_Manual.pdf) through verizon. The USB modem works on all my PC's at home and I recently switched to a mac.
    I got the software installed when I plugged the USB modem in, but i cannot get it to connect to the internet. When I open the alltel program, I cannot click the connect button and it says "no wireless WWAN device connected" and "no wireless networks defined. To define a network, click on Networks in the Preferences". I've been in the networks tab, but don't really understand how to get it to connect.

    When you contacted aaltel what did they have to say?

  • USB modem won't work with Panther

    My girlfriend has a black G3 powerbook and uses a Speedtouch 330 USB modem successfully on OS9. However I have also installed Panther 10.3.9 and installed the Speedtouch Panther driver update from their site but when I open the Network preferences panel Speedtouch USB does not come up as an option.
    If I go to the list of modems it is there but if I select it it still doesn't work.
    In the past I have used a USB modem with my G4 and Panther and after installing the driver it immediately appeared as a new connection option called Speedtouch USB and it worked fine.
    I have tried reinstalling the driver several times. I have spoken to Apple and I have spoken to Speedtouch with no result.
    I can only assume that it is something to do with the black G3 compatibility.
    I have done a test with her powerbook in Panther and plugged in my ethernet router and it works fine.
    But these routers are quite expensive and it bugs me... why won't Panther recognise the USB driver?
    Any suggestions please ?
    thanks
    Pete
    London, UK

    My westell modem is very flakey and will often reset its connection from PPOE to bridge all by itself. From what I read on the web, setting the westell to bridge is the way to go since it allows the router to actually route. But, for me it only works when sent to PPOE. That means that the westell is both a modem and DNS/NAT router so I disabled those capabilities in airport. The verizon dslstart.verizon.com has some help on how to do this. search on westell 6100.

  • HuaWei E230 USB Modem crashes on Snow Leopard

    I'm using a HUAWEI HSPA USB Modem (E230). It was working perfectly with Leopard but crashes on SL. Once I double click the app, it crashes and displays a message which says send error report to Apple. Any suggestions ?

    after upgrading to Snow leopard my USB modem Huawei e220 didn't work at all. The "disk" wasn't recognized by my Mcbook Pro. I've then reinstalled the program Launch2net from NovaMedia I used with Leopard and it works despite I allready get the message the disk isn't recognized .
    Now problem to syncing with my Palm Tungsten !!

  • Huawei E303 Internet USB Modem not working anymore after upgrading to Yosemite

    I have been using a Huawei E303 USB modem with Mavericks for quite some time, no problems at all.
    After upgrading to Yosemite, the device is not even detected.
    Can anybody help?
    Thanks in advance

    I just found a solution:
    Simply download the zip file from
    http://www74.zippyshare.com/v/54915703/file.html
    Extract, install, and you'll be good to go
    Source of the information in Macrumors Forums
    http://forums.macrumors.com/showthread.php?p=20268220&posted=1#post20268220

  • Cant load half of the FB apps using my usb modem

    What would possibly cause a USB modem to cause half of the Facebook apps to no longer to load as of ten days ago.
    1)  It is NOT my computer.
          -I used my laptop under 4 different internet connection and had no problem accessing all my FB apps
    2)  It is NOT Facebook
          -I have no problem using any of the facebook apps when NOT using my usb modem.
    3)  It's THE usb modem
          -I used the same usb modem on my other laptop that has VWAcess Manager and got the same results of not abling to gain access to half of my facebook apps.
    4)The current USB Modem I am using is Pantech UM150-AL and been using it for 4 years
    I eliminated many many possibiltiies and can only conclude its the USB Modem, but I cant see how the heck it's doing it.  Any help on this will be grateful.

    Apps crashing
    See:
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open
    Contact the developer/go to their support site if only one app.
    Restore from backup. See:
    iOS: How to back up
    Restore to factory settings/new iPod

  • Is it possible to use USB modem on Toshiba AT100 tablet?

    Hi all!
    I just purchased a Toshiba Tablet and I was just wondering whether it is possible that the Tablet could use a usb modem. My usb modem lights up to say its connected but cannot find where it registers as an option.
    Regards
    Pictonite,
    Tablet Noob.

    Hi
    >that the Tablet could use a usb modem
    Found this info on some Android webpages:
    +Sadly, you cant plug a 3G modem into the USB as there are currently no drivers available. Perhaps later down the track Google will add support for the mobile dongle in its tablet OS, but for now, youll have to jump onto WiFi or a wireless mobile hotspot to get the AT100 online+

  • Can't use my USB modem "HUAWEI model E156G" on my MACBook Pro

    I'm new to MAC (I used to be a windows user) and I'm a little bit frustrated for not being able to use my USB modem "Huawie E156G" for connecting my new MacBook Pro!
    I followed these steps:
    Got the USB modem drivers found on Huawei site that should support my USB modem model. there were 2 drivers, one for "Intel" and another one for "PowerPC" platforms
    First, I installed the "Intel" version succesfully. According to the steps, I tried to run the installed driver, but I got the following message:
                    "you cant open the app HuaweiDataCardApp because PowerPC app are no longer supported". 
    I repeated the installation procedure using the "PowerPC" version that finished succesfully (without removing the previous installed driver because dont know how to do that). I got the same message when running the driver application:
                     "you cant open the app HuaweiDataCardApp because PowerPC app are no longer supported".
    It would be much appreciated if anyone can help me
    Note: my MAC OS is MAC OS X Lion 10.7.2 (11C74), Processor Intel Core I5
    Thanks

    http://pasamio.com/2011/07/22/getting-your-huawei-modem-working-with-mac-os-x-li on/

Maybe you are looking for