Cant view Canon MG3160 Printer in Airprint List.

Hi All
i just purchased a Canon MG3160 Printer and have set it up on my home network. I have got it connected to my desktop computer using the USB cable and have also got it connected to my airbook wirelessly without any problems,
When i try to locate it on my iphone it just keeps saying no airprint printers found even though Canon advertise it as being a mobile printer for use with an iphone etc.
Has anyone had any luck getting their phone to connect to this printer or is there a setting somewhere that i need to enable that i may of missed?
Look forward to hearing your suggestions
Regards
Jamie

I had the same problem
I downloaded the latest firmware from the Canon website for this printer (v2.010), ran the .exe with my laptop connected via USB cable and now everything works fine.
I can now print from iPhone and iPad using Airprint.
The firmware can be downloaded from
http://support-au.canon.com.au/contents/AU/EN/0400051602.html
The general Canon website for this printer is
http://www.canon.com.au/For-You/Printers/PIXMA-InkJet-Printers/MG3160

Similar Messages

Printing iCal weekly list view

Experimenting with a trial version of Missing Sync to sync my Palm with iCal. Is it possible to delete the notes that appear under each event when I print the weekly list view? I print out 8 days and I want to keep it to one page. Eliminating the notes would help. Or is it possible to add the time frame to each event in the week view so you can more easily see the begin and end time for each event?
Is the Missing Sync program worth it or should I just use the sync program that came with iCal?

pinkbeats wrote:
+1 to it's return.
Seems strange that it's been removed when, with the increased convergence of OS X and iOS, it's a view that available in the Calendar app in iOS.
Like others here, this was the most useful view for me and I'm disappointed it's not there, hope it comes back with the Yosemite .1 release.
Unfortunately it hasn't .

My setup: iMac hardline to Canon i960 printer. Issue: endless printing of the same document. The printer window states that the pinter is in use and there is nothing listed in the Print Queue. How can I stop printing the document?

My setup: iMac hardline to Canon i960 printer. Issue: endless printing of the same document. The printer window states that the pinter is in use and there is nothing listed in the Print Queue. How can I stop printing the document?

Soution: Delete the printer and add the same printer back in, therefore creating a new print queue.

In application express under object browser i cant view the list of tables

Hi,
In the application Express workspace when i click on Object Browser, we have a list of existing tables which displays. But cant view the table list now. could you please help. I can retrieve the data from the table in the region. I dont know how it got hidden.
Regards,

Please tell us your first name and put it into your handle and profile to help us.
...we have a list of existing tables which displays.
But cant view the table list now.
cant -> can't
Aren't those contradictory statements?
What is your version of Application Express?
Scott

Can't get my iphone4 AirPrint to work with Canon mx712 printer

Can't get my iphone4 AirPrint to work with canon mx712 printer
I've reviewed all network, printer, phone settings

airprint basic http://support.apple.com/kb/ht4356 see if that printer is compatible.
airprint troubleshooting http://www.apple.com/support/iphone/assistant/airprint/
If it is not compatible then you will need to look at the appstore to find something compatible to be able to print.

Print via Airprint with iPad 3 and Canon MG5350

Hi,
I have a very common problem but none of the so far provided answers were suitable to help me. I use a new Canon MG5350 printer with WLAN and Airprint. The firmware has been updated to version 2 and nevertheless I cannot print via Airprint from my iPad 3 WiFi. My iPhone 4 finds the Canon printer without problems but the iPad keeps saying "No Airprint printers found".
Who can help? As I said, I have updated the printer's firmware.
Cheers
Frank

Hi Frank, I too have an MG5350 and ipad3 over wireless LAN. Printer is ace when used from my PC and laptop but got the same as you did trying to print from ipad. Tried Canon UK support but useless would be a compliment. Apple support in Cork suggested going to ipad settings, switch to airplane mode which stops wifi and then switch back again, wifi reconnnects and when I try and print, it finds the MG5350 and prints! Only one problem, leave it and come back after half hour and its back to "no airprint printers found" Doing the wifi on /off trick works everytime but have no answer as to why it is dropping it but still searching.
Hope this helps a bit.

Am trying to get my Ipad1 to work via AirPrint using Pages and a Canon MG8250 printer. My iMac works ok but the iPad attempt results in the printer trying to use the rear paper tray rather than the lower paper drawer. All drivers and firmware are latest

My set up is Imac + Ipad1 + canon MG8250 printer. Wireless network. airprint in use and functions fine with the Imac. The Ipad initiates printing ok but always faults out with the error 'Printer out of paper' because it tries to use the rear paper tray (special paper ) instead of the paper drawer.

Johnmac@47-
Could the iMac have printed something that required use of the rear tray? That might have reset the printer's default. Look in the printer manual to see if it has a setting to change the default paper tray. (Note that the iMac does not use AirPrint, it uses the printer's native printing language.)
Your problem may be a flaw in the Canon AirPrint implementation. I suggest you report it to Apple at <iPad Feedback>, as well as to Canon. There may be a simple correction that can be made to either the next iOS update or to the Canon printer firmware.
Fred

I cannot get my Canon 5220 printer to come up in the add printer list. Where did it go?

My Canon 5220 printer was not showing a connection to my computer. I decided to delete it and readd. When I went to add the printer again, it would not come up in the list. I have done this before so I am not sure what the issue is now. I have it set up as wi-fi. Any suggestions?

Hi there ag.girl,
You may find the troubleshooting steps in the article below helpful.
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
-Griff W.

Mac OS X 10.9.3 does not detect the presence of Canon MX395 printer. Help?

Hi,
My printer/scanner was working fine before I upgraded to Mac OS X Mavericks. I now run OS X 10.9.3, the printer is Canon MX395.
Basically mr problem is that the printer is simply not detected. I turn it on and plug in the USB cable but nothing happens. I cannot view the printer in the list of printers in System Preferences > Printers & Scanners, nor can view it if I click Add. I have already spent 2 sessions of 3-4 hours following all steps provided in Apple Support pages about setting up printers and troubleshooting with printers (including reset printing system and deleting all canon related files/applications and installing everything again, meaning both drivers from canon and canon drivers from Apple) and I am sure that the printer is working and well connected.
Need help please!
Thanks,
Antoine

Hi all,
Update on my situation, my problem is solved.
I disinstalled and reinstalled many times everything to come to the conclusion that, in my case, installing the driver from Canon PROHIBITS the printer/scanner from working. Indeed, everything is now running fine with Apple driver for Canon printers (Apple Canon Printer Driver 3.0 for mac OS). BUT, if Canon driver is at the same time installed, computer is not being recognized. Having solely Canon driver without Apple driver also results in the printer not being recognized.
This may sound weird (at least to me) but that is how it seems to be. Hope this can help anyone.
Final solution:
1) disinstall everything printer related (printers, drivers, reset printing system)
> In my case, I did not reinstall Mavericks nor reset the whole OS
2) install the Apple driver (and ignore the one from Canon)
3) connect the printer, turn it on, should be working
Regards,
Antoine

OSX 10.5.8 won't recognize Canon iP2702 printer

I just used the installation disc that came with my Canon iP2702 printer to install it on my Macbook w/10.5.8.    Canon says that the printer is compatible with Leopard in all of its literature.
I installed the driver that is on the disc, with the complete installation package. I followed the installation instructions to the letter.    The printer was not listed when I tried to print a document.
Then I went on Canon's site and downloaded the latest version of the driver. I installed it, but still the printer was not listed when I tried to print.   Nor was it listed when I tried to add a printer.
I rebooted the computer after the driver installation.   Still nothing.
Am I missing something?
Any tips greatly appreciated.

Hi David,
Try this for a start...
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
10.5/10.6/10.7/10.8 instructions...
In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
if you hold option and click the "-" tab it resets the printing system.
http://www.macosxhints.com/article.php?story=20031215144430486
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
Resetting the printing system in Mac OS X 10.5.x+++
To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
Choose System Preferences from the Apple menu.
Choose Print & Fax from the View menu.
Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..."
As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
http://support.apple.com/kb/ht1341
Reboot.

Cant view video message after skype vanished

hi there, im very confused. i sent a video message to a contact i send videomessages to all the time with no problems. but today when i logged on to my laptop, the skype rpogram had vanished from my computer. its wasnt anywhere even in my programs list. i reinstalled the latest version , no problem. restarted my computer no problem. sent a video message no problem. but when i recieved a video message i cant view it. please view print screen. please help.
also could i download this video? so i could view it offline? would that work. can you resend video messages? im very confused.
thanks
Attachments:
skype.png ‏148 KB

Please, run the DirectX diagnostics tool (32-bit version).
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.

Cannot install Canon MX700 Printer Drivers

I have tried to install from the CDROM that came with the printer, it failed with both the "Easy" and the "Custom" installs, with the error message:
MP Drivers could not be installed. Click [Start Over] to reexecute the installation process. That also fails, and I decided to break out of the infinite loop of starting over again and again by posting this message.
I also tried the suggestions as to how to correct installation problems, such as trying to install with an administrator account, and having no other apps running. These did not work; this is good because this isn't Windows after all.
Furthermore, I downloaded the drivers from the Canon USA site
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SupportDeta ilTabAct&fcategoryid=238&modelid=15651&kbpage=yes#DownloadDetailAct
but no joy with 6.9.3 nor with the CUPS 10.1.2 either. Both report failure with: The following install step failed: run preflight script for Canon IJ Printer Driver. Contact the software manufacturer for assistance. I wondered if I was alone with this problem with OS X 10.5.6?

I think you will find this is not an issue with 10.5.6, but rather something about your Mac setup that is stopping the installer from working correctly.
Try the following procedure for repairing faulty installations of the Canon drivers.
1. Open System Preferences > Print & Fax. Highlight the Canon printer in the Printer list and click the minus ( - ) button.
2. Hold Control key and click in the empty Printers list. Click on Reset Printing System.
3. Close Print & Fax
4. Go to Library > Printers > Canon and delete the contents of the BJPrinter folder.
5. Go to Library > Receipts and delete the Canon driver package file, if one exists. The file name will show Canon MX700 xxx.pkg
6. Go to Library > Preferences and delete the Canon folder.
7. Empty the Trash
8. Unplug the Canon USB cable and restart the Mac
9. Install the version 6.9.3 Canon driver that you downloaded. You don't need the CUPS v10.1.2 driver or any version on the included CDROM.
10. Once the driver installation is complete, go to Applications > Utilities and open Disk Utility. Run the Repair Disk Permissions option.
11. Reconnect the Canon USB cable. Then open Print & Fax and see if the Canon printer is listed. If it is, try a test print.
12. If the printer is not listed, click the plus ( + ) button.
13. Select the Default view and select the Canon printer connected via the USB port. The Print Using menu should automatically change to Canon IJ Printer.
14. Click Add to add the printer.
PaHu

Can i use my new I pad with the Canon MX870 printer?

Can I use a I PAD 2 with me Canon MX870 Printer?

The Canon MX870 is not on Apple's AirPrint list of supported printers:
AirPrint basics
So you would have to find some Canon app or some third party app in the App Store to do some limited printing from iPad.

I have a new Canon MX432 printer the ipad recognizes it but it won't print. Any advice?

I have a new Canon MX432 printer the ipad recognizes it but it won't print. Any advice?

Patti-
Is your Epson printer on Apple's list of AirPrint capable printers? See <http://support.apple.com/kb/ht4356>.
If it is an AirPrint printer, then your WiFi router may not correctly handle Bonjour data required by AirPrint. Contact the router's manufacturer to see if there is a change to its setup or a firmware update, that will make it work.
One other possibility is that there could be a print job stuck in the iPad's print queue. Double click the iPad's Home button and a row of recent Apps will appear along the bottom of the screen. Scroll across and see if the Print Center is there.
Fred

HT201465 update broke Canon MX922 printer

Hi,
I have a Canon MX922 printer (using the Canon MX920 series driver) that I've been using for three months over WiFi. The latest software update HT201465 broke my printer. I've tried resetting the printing system, deleting/adding the printer but nothing works.
Printing over my iPhone (AirPrint) still works, but my Mac can't use the printer for scanning or printing. It does show up as a bonjour printer and I can re-add it without issues, but printing or communicating with the printer doesn't work.
Anybody else with the same problem?
Seems like Apple dropped the ball on this update.
Thanks,
Sebastian

Sebastian-S wrote:
I can't ping or access the printer's webinterface either from my iMac or MacBook - that part makes even less sense to me. There's no access control in place.
If you cannot ping the MX or connect to its internal web page then it explains why you cannot print. What seems odd is that the device appears in the Default view of the Add printer window, as shown by your screen grab. If the restart mentioned above does not help, then confirm that the Mac is set to use the same IPv4 subnet as the MX.
If you leave the Default view of the Add printer window open, do you see another MX922 entry appear with Canon IJ Network, as shown below? This protocol is provided by the installed Canon driver, while Bonjour is part of the Apple system. Since you cannot ping the MX I would expect you don't but just want to check.

Cant view Canon MG3160 Printer in Airprint List.

Similar Messages

Maybe you are looking for