Canvas Bags and cases

Does anyone know if a 17" Macbook Pro will fit in 15" wide bag. I'm looking at a messenger type bag (decent quality)but most seem to be only 15" wide and I don't know if the 17" MBP will fit comfortably.
Any advise is appreciated.
MACPro C2D 2.33 17" Mac OS X (10.4.8)

Welcome to Apple Discussions!
Some cases will handle wide notebooks as long as the padding lets you slide it in width wise with an extra padded cover on top that is velcro attached and adjustable. While others which use zipper closing won't fit anything other than the size stated. I found High Sierra backback works well with my 17" Powerbook which is identical in dimensions to the 17" MacBook Pro:

Similar Messages

Creation of a second Exchange 2013 server on a different site (with the roles of MBX and CAS) fails on prepare active directory and prepare schema.

Hello everyone
I have a network infrastructure consisting of 3 sites, site A, site B, and site C. i have 2 domain controllers on every site, and the AD roles are on the primary domain controller on site A. On site A I have an Exchange 2013sp1 CU6.
I want to create a second Exchange on Site B, with the roles of mailbox (the exchange on Site A will be first DAG member and the Exchange on Site B will be the second member of the DAG) and CAS.
First question: Is my thought correct about installaing on the same server mailbox and CAS server?
Second question: how many DAG witnesses I need for the DAG? One per site, or one in general (for example located on site A)
Third question: When I am trying to perform “Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms” I receive the error
“ Setup encountered a problem while validating the state of Active Directory:
The Active Directory schema version (15303) is higher than Setup's version (15292). Therefore, PrepareSchema can't be executed. See the Exchange setup log for more information on this error. For more information, visit:
http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.AdInitErrorRule.aspx “
I tried to run the PrepareSchema from the ISO of Exchange 2013 SP1 and form the extracted content of Exchange 2013SP1 CU6 archive, but still receive the same error. Any ideas?
Thanks in advance.

Thank you for your answer,
I have tried to run "Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms” from
Exchange 2013 CU6 media, but I still receive the error:
The Active Directory schema version (15303) is higher than Setup's version (15292). Therefore, PrepareSchema
can't be executed. See the Exchange setup log for more information on this error. For more information, visit:http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.AdInitErrorRule.aspx “
any ideas?

Difference between BAG and SET

Difference between BAG and SET....
SET--->is collection of objects
|....>contains no order
|....>allows no duplicate
BAG---->???????
Can any one explain this....
Thank you...

[http://en.wikipedia.org/wiki/Multiset]

How do I use switch and case statements to fill more than one other field?

Hi all,
I'm new to the community.
I'm trying to make an existing form more user friendly for my coworkers. I want to use a switch and case approach in a drop-down list field so that the selection fills two seperate other fields with different info related to the selection.
I can already do this with one field, but if I add a second target field under an existing case the text doesn't appear there when I make the selection from the dropdown.
Basically, I'm asking if I can do this:
switch
(sNewSel){
   case "1": // Selection 1    Row2.Field1
= "text for field 1";
    Row1.Field2 = "text for field 2";
    break;
etc.
It works if the "row1.field2" option isn't there, but not when it is present.
Any takers?

I'm not sure if I will be able to send you the form. There may be too much to redact.
Would this last bit of code in the cell affect anything?
if
(bEnableTextField)
{Row2.Field1.access
= "open"; // enable field
Row2.Field1.caption.font.fill.color.value= "0,0,0"; // set caption to black
That is, do I also need to repeat the same thing for the second target cell (Row1.Field2)?
What would be possible hang ups that would prevent it from working correctly?
Dave
By the way, I'm not sure if my other attachment posted. I am trying again.

CASE STATEMENTS AND CASE EXPRESSIONS IN ORACLE9I PL/SQL

제품 : PL/SQL
작성날짜 : 2001-11-13
CASE STATEMENTS AND CASE EXPRESSIONS IN ORACLE9I PL/SQL
=======================================================
PURPOSE
아래의 자료는 Case 문에서 oracle 8.1.7과 Oracle 9i의 New Feature로 8.1.7에서는
sqlplus 에서만 가능했고, 9i 부터는 pl/sql 까지 가능하다.
Explanation
1. Oracle 8.1.7 Feature
Oracle 8.1.7 에서 Case 문은 Decode 문과 유사하지만, 기존의 decode 문을 쓰는 것보다
더 많은 확장성과 Logical Power와 좋은 성능을 제공한다. 주로 나이와 같이 category 별로
나눌때 주로 사용하고 Syntex는 아래와 같다.
CASE WHEN <cond1> THEN <v1> WHEN <cond2> THEN <v2> ... [ELSE <vn+1> ] END
각각의 WHEN...THEN 절의 argument 는 255 까지 가능하고 이 Limit를 해결하려면
Oracle 8i Reference를 참조하면 된다.
The maximum number of arguments in a CASE expression is 255, and each
WHEN ... THEN pair counts as two arguments. To avoid exceeding the limit of 128 choices,
you can nest CASE expressions. That is expr1 can itself be a CASE expression.
Case Example : 한 회사의 모든 종업원의 평균 봉급을 계산하는데 봉급이 $2000보다 작은경우
2000으로 계산을 하는 방법이 pl/sql을 대신하여 case function을 사용할 수 있다.
SELECT AVG(CASE when e.sal > 2000 THEN e.sal ELSE 2000 end) FROM emp e;
Case Example : 나이를 column으로 가지고 있는 customer table을 예로 들어보자.
SQL> SELECT
2 SUM(CASE WHEN age BETWEEN 70 AND 79 THEN 1 ELSE 0 END) as "70-79",
3 SUM(CASE WHEN age BETWEEN 80 AND 89 THEN 1 ELSE 0 END) as "80-89",
4 SUM(CASE WHEN age BETWEEN 90 AND 99 THEN 1 ELSE 0 END) as "90-99",
5 SUM(CASE WHEN age > 99 THEN 1 ELSE 0 END) as "100+"
6 FROM customer;
70-79 80-89 90-99 100+
4 2 3 1
1 SELECT
2 (CASE WHEN age BETWEEN 70 AND 79 THEN '70-79'
3 WHEN age BETWEEN 80 and 89 THEN '80-89'
4 WHEN age BETWEEN 90 and 99 THEN '90-99'
5 WHEN age > 99 THEN '100+' END) as age_group,
6 COUNT(*) as age_count
7 FROM customer
8 GROUP BY
9 (CASE WHEN age BETWEEN 70 AND 79 THEN '70-79'
10 WHEN age BETWEEN 80 and 89 THEN '80-89'
11 WHEN age BETWEEN 90 and 99 THEN '90-99'
12* WHEN age > 99 THEN '100+' END)
SQL> /
AGE_G AGE_COUNT
100+ 1
70-79 4
80-89 2
90-99 3
Example
2. Oracle 9i Feature
Oracle 9i부터는 pl/sql에서도 case문을 사용할 수 있으면 이것은
복잡한 if-else 구문을 없애고, C언어의 switch문과 같은 기능을 한다.
아래의 9i pl/sql Sample 및 제약 사항을 보면 아래와 같다.
Sample 1:
A simple example demonstrating the proper syntax for a case
statement
using a character variable as the selector. See the section entitled
'Restrictions' at the end of this article for details on which PLSQL
datatypes may appear as a selector in a case statement or
expression.
- - - - - - - - - - - - - - - - Code begins here - - - - - - - - - - - -
set serveroutput on
declare
achar char(1) := '&achar';
begin
case achar
when 'A' then dbms_output.put_line('The description was Excellent');
when 'B' then dbms_output.put_line('The description was Very Good');
when 'C' then dbms_output.put_line('The description was Good');
when 'D' then dbms_output.put_line('The description was Fair');
when 'F' then dbms_output.put_line('The description was Poor');
else dbms_output.put_line('The description was No such Grade');
end case;
end;
- - - - - - - - - - - - - - - - Code ends here - - - - - - - - - - - -
Sample 2:
A simple example demonstrating the proper syntax for a case
expression
using a character variable as the selector. See the section entitled
'Restrictions' at the end of this article for details on which PLSQL
datatypes may appear as a selector in a case statement or
expression.
- - - - - - - - - - - - - - - - Code begins here - - - - - - - - - - - -
set serveroutput on
declare
achar char(1) := '&achar';
description varchar2(20);
begin
description :=
case achar
when 'A' then 'Excellent'
when 'B' then 'Very Good'
when 'C' then 'Good'
when 'D' then 'Fair'
when 'F' then 'Poor'
else 'No such grade'
end;
dbms_output.put_line('The description was ' || description);
end;
- - - - - - - - - - - - - - - - Code ends here - - - - - - - - - - - -
NOTE: The above simple samples demonstrate two subtle differences in the
syntax
required for case statements and expressions.
1) A case STATEMENT is terminated using the 'end case' keywords; a
case
EXPRESSION is terminated using only the 'end' keyword.
2) Each item in a case STATEMENT consists of one or more
statements, each
terminated by a semicolon. Each item in a case expression
consists of
exactly one expression, not terminated by a semicolon.
Sample 3:
Sample 1 demonstrates a simple case statement in which the selector
is
compared for equality with each item in the case statement body.
PL/SQL
also provides a 'searched' case statement as an alternative; rather
than
providing a selector and a list of values, each item in the body of
the
case statement provides its own predicate. This predicate can be any
valid boolean expression, but only one case will be selected.
- - - - - - - - - - - - - - - - Code begins here - - - - - - - - - - - -
set serveroutput on
declare
achar char(1) := '&achar';
begin
case
when achar = 'A' then dbms_output.put_line('The description was
Excellent');
when achar = 'B' then dbms_output.put_line('The description was Very
Good');
when achar = 'C' then dbms_output.put_line('The description was
Good');
when achar = 'D' then dbms_output.put_line('The description was
Fair');
when achar = 'F' then dbms_output.put_line('The description was
Poor');
else dbms_output.put_line('The description was No such Grade');
end case;
end;
- - - - - - - - - - - - - - - - Code ends here - - - - - - - - - - - -
Sample 4:
This sample demonstrates the proper syntax for a case expression of
the
type discussed in Sample 3 above.
- - - - - - - - - - - - - - - - Code begins here - - - - - - - - - - - -
set serveroutput on
declare
achar char(1) := '&achar';
description varchar2(20);
begin
description :=
case
when achar = 'A' then 'Excellent'
when achar = 'B' then 'Very Good'
when achar = 'C' then 'Good'
when achar = 'D' then 'Fair'
when achar = 'F' then 'Poor'
else 'No such grade'
end;
dbms_output.put_line('The description was ' || description);
end;
- - - - - - - - - - - - - - - - Code ends here - - - - - - - - - - - -
Sample 5:
This sample demonstrates the use of nested case statements. It is
also
permissable to nest case expressions within a case statement (though
it
is not demonstrated here), but nesting of case statements within a
case
expression is not possible since statements do not return any value.
- - - - - - - - - - - - - - - - Code begins here - - - - - - - - - - - -
set serveroutput on
declare
anum1 number := &anum1;
anum2 number := &anum2;
answer number;
begin
case anum1
when 1 then case anum2
when 1 then answer := 10;
when 2 then answer := 20;
when 3 then answer := 30;
else answer := 999;
end case;
when 2 then case anum2
when 1 then answer := 15;
when 2 then answer := 25;
when 3 then answer := 35;
else answer := 777;
end case;
else answer := 555;
end case;
dbms_output.put_line('The answer is ' || answer);
end;
- - - - - - - - - - - - - - - - Code ends here - - - - - - - - - - - -
Sample 6:
This sample demonstrates nesting of case expressions within another
case
expression. Note again the absence of semicolons to terminate both
the
nested case expression and the individual cases of those
expressions.
- - - - - - - - - - - - - - - - Code begins here - - - - - - - - - - - -
set serveroutput on
declare
anum1 number := &anum1;
anum2 number := &anum2;
answer number;
begin
answer :=
case anum1
when 1 then case anum2
when 1 then 10
when 2 then 20
when 3 then 30
else 999
end
when 2 then case anum2
when 1 then 15
when 2 then 25
when 3 then 35
else 777
end
else 555
end;
dbms_output.put_line('The answer is ' || answer);
end;
- - - - - - - - - - - - - - - - Code ends here - - - - - - - - - - - -
Although PL/SQL anonymous blocks have been used in all of the examples
so far,
case statements and expressions can also be used in procedures,
functions, and
packages with no changes to the syntax.
The following samples are included for completeness and demonstrate the
use of
case statements and/or expressions in each of these scenarios.
Sample 7:
This sample demonstrates use of a case statement in a stored
procedure.
Note that this sample also demonstrates that it is possible for each
of
the items in the case body to consist of more than one statement.
- - - - - - - - - - - - - - - - Code begins here - - - - - - - - - - - -
set serveroutput on
create or replace procedure testcasestmt ( anum IN number ) is
begin
case
when anum = 1 then dbms_output.put_line('The number was One');
dbms_output.put_line('In case 1');
when anum = 2 then dbms_output.put_line('The number was Two');
dbms_output.put_line('In case 2');
when anum = 3 then dbms_output.put_line('The number was Three');
dbms_output.put_line('In case 3');
when anum = 4 then dbms_output.put_line('The number was Four');
dbms_output.put_line('In case 4');
when anum = 5 then dbms_output.put_line('The number was Five');
dbms_output.put_line('In case 5');
else dbms_output.put_line('The description was Invalid input');
dbms_output.put_line('In the else case');
end case;
end;
exec testcasestmt(&anum);
- - - - - - - - - - - - - - - - Code ends here - - - - - - - - - - - -
Sample 8:
This sample demonstrates the use of a case statement in a stored
package.
- - - - - - - - - - - - - - - - Code begins here - - - - - - - - - - - -
set serveroutput on
create or replace package testpkg2 is
procedure testcasestmt ( anum IN number );
function testcasestmt_f ( anum IN number ) return number;
end testpkg2;
create or replace package body testpkg2 is
procedure testcasestmt ( anum IN number ) is
begin
case
when anum = 1 then dbms_output.put_line('The number was One');
dbms_output.put_line('In case 1');
when anum = 2 then dbms_output.put_line('The number was Two');
dbms_output.put_line('In case 2');
when anum = 3 then dbms_output.put_line('The number was Three');
dbms_output.put_line('In case 3');
when anum = 4 then dbms_output.put_line('The number was Four');
dbms_output.put_line('In case 4');
when anum = 5 then dbms_output.put_line('The number was Five');
dbms_output.put_line('In case 5');
else dbms_output.put_line('The description was Invalid input');
dbms_output.put_line('In the else case');
end case;
end;
function testcasestmt_f ( anum IN number ) return number is
begin
case
when anum = 1 then dbms_output.put_line('The number was One');
dbms_output.put_line('In case 1');
when anum = 2 then dbms_output.put_line('The number was Two');
dbms_output.put_line('In case 2');
when anum = 3 then dbms_output.put_line('The number was Three');
dbms_output.put_line('In case 3');
when anum = 4 then dbms_output.put_line('The number was Four');
dbms_output.put_line('In case 4');
when anum = 5 then dbms_output.put_line('The number was Five');
dbms_output.put_line('In case 5');
else dbms_output.put_line('The description was Invalid input');
dbms_output.put_line('In the else case');
end case;
return anum;
end;
end testpkg2;
exec testpkg2.testcasestmt(&anum);
variable numout number
exec :numout := testpkg2.testcasestmt_f(&anum);
print numout
- - - - - - - - - - - - - - - - Code ends here - - - - - - - - - - - -
Sample 9:
This sample demonstrates the use of a case expression in a stored
package.
- - - - - - - - - - - - - - - - Code begins here - - - - - - - - - - - -
set serveroutput on
create or replace package testpkg is
procedure testcase ( anum IN number );
function testcase_f ( anum IN number ) return number;
end testpkg;
create or replace package body testpkg is
procedure testcase ( anum IN number ) is
anumber number := anum;
anothernum number;
begin
anothernum :=
case
when anumber = 1 then anumber + 1
when anumber = 2 then anumber + 2
when anumber = 3 then anumber + 3
when anumber = 4 then anumber + 4
when anumber = 5 then anumber + 5
else 999
end;
dbms_output.put_line('The number was ' || anothernum);
end;
function testcase_f ( anum IN number ) return number is
anumber number := anum;
anothernum number;
begin
anothernum :=
case
when anumber = 1 then anumber + 1
when anumber = 2 then anumber + 2
when anumber = 3 then anumber + 3
when anumber = 4 then anumber + 4
when anumber = 5 then anumber + 5
else 999
end;
dbms_output.put_line('The number was ' || anothernum);
return anothernum;
end;
end testpkg;
variable numout number
exec testpkg.testcase(&anum);
exec :numout := testpkg.testcase_f(&anum);
print numout
- - - - - - - - - - - - - - - - Code ends here - - - - - - - - - - - -
제약 사항
다음의 databasetype은 case 문에서 지원되지 않는다.
BLOB
BFILE
VARRAY
Nested Table
PL/SQL Record
PL/SQL Version 2 tables (index by tables)
Object type (user-defined type)
All of these types except for object types face a similar restriction
even for if statements (i.e. they cannot be compared for equality directly) so this is unlikely to change for these types. Lack of support for object types is simply an implementation restriction which may be relaxed in future releases.
Reference Ducumment
Oracle 8.1.7 Manual
NOTE:131557.1

I have done the following code but doesn't
like the statement of - "case(butNext)". What do you mean "doesn't like" -- did you get an error message?
I'm guessing it won't compile because you're trying to switch on a Button.
I tried something
like "g.fillOval(100,50,70,90, BorderLayout.NORTH)"...no that doesn't make sense. You only use BorderLayout.NORTH when you're adding components to a BorderLayout layout manager. An oval is not a component and fillOval isn't adding a component and Graphics is not a Panel or layout manager.
Would appreciate it if someone could tell me how to position
shapes using the graohic method. I think the problem is that you're confusing shapes with components.

I would like to know how can i compare a switch case 1 and case 2 in C# is it possible to do that? obs i am a begginer :)

i would like to know how can i compare a switch case 1 and case 2 in C# is it possible to do that? obs i am a begginer :) I tried to do it with search and sort but it did not go well

let me give you an example if you add a word case 1( lagg ord) how can i compare that word with case 2 words ( in case 2 already exist 5 words)
here is the my program
using System;
namespace ConsoleApplication1
class Program
static void Main(string[] args)
//Meny
Console.WriteLine("\n HÄNGA GUBBE\n");
Console.WriteLine(" 1) Lägg till ord");
Console.WriteLine(" 2) Lista alla ord");
Console.WriteLine(" 3) Spela");
Console.WriteLine(" 4) Avsluta");
bool utgång = false;
do
int Valet;
Console.Write("\n\tVälj 1-4: \n ");
try
Valet = int.Parse(Console.ReadLine());
catch (Exception)
Console.WriteLine("Du skriver fel character!\n" +
"\nSkriv bara mellan 1 och 4");
continue;
switch (Valet)
case 1:
Console.WriteLine("\n lägg ett till ord! ");
var input = Console.ReadLine();
break;
case 2:
Console.WriteLine("\n Lista med alla ord :\n");
string[] array = { " Lev", " Skratta", " Gledje", " Gråt", " Njut" };
Array.Sort<string>(array);
foreach (var c in array)
Console.WriteLine(c);
Console.WriteLine("\n");
break;
case 3:
string guesses, bokstäver;
Console.Write("\n Hur många fel får man ha? ");
guesses = (Console.ReadLine());
Console.WriteLine(" Utmärkt, då spelar vi!\n");
Console.WriteLine(" Felgisningar :" + "0/" + guesses);
Console.Write(" Gissade bokstäver ");
bokstäver = (Console.ReadLine());
Console.WriteLine("Aktuellt ord");
Console.Write("Gissa bokstav : " + bokstäver + " \n");
break;
case 4:
Console.WriteLine("\n HEJ DÅ! \n");
Console.Beep();
utgång = true;
break;
//avbryter while loopen, avslutar spelet
} while (!utgång);

I Need a Good HD and Case Which One to Buy?

I need an external, large capacity (350GB +) HD for my iBook G4. Can anyone recommend a good HD and case? I need to be able to boot from the external HD. Thanks.

Mostly it saves money since you don't have to buy separate drives.
But its also nice to keep certain things separated. I back up two Macs to a single drive, but separate partitions. OS-X thinks they are separate drives and SuperDuper recognises which drive belongs with which Mac.
-marc

Flex Cube - Deposits and CASA documentation

Flex Cube - Deposits and CASA documentation: someone could help me to find documentation and information about CA SA and Deposits Flex CUbe MOdule ? Thanks.

FSCM SAP 5.0 Dispute Management-record and case model-dispute cas model.xml

Hello,
I am using the W21: Dipsute Management Building Block Configuration Guide.doc
At the first step, creating a case record model, the configuration guide refers to a file:
6.     In the toolbar of the Modeler in the upper middle section select Model >> Load local file and open the file - dispute case model.xml -.
I do not have this file available, does anyone have any idea how to resolve this?
-     How can I obtain this file
-     Is this file necessary, to create a case record model
Thanks for your help.
Kind regards,
Santiago

Hi Santiago,
This was tricky for me too. Execute tran UDM_DISPUTE. Change your RMS ID (left side, middle box, icon with two overlapping squares) to UDM_DISPUTE. In the same box, expand Record and Case Record Models. Double click on Modeler for Case Records in Dispute Management. This brings up a search box. Click on execute Search. Double click on the Dispute Management entry in the lower box. This gives you the standard model. You can download this, using the Other Model Functions.
Then change to your custom RMS ID (ex. ZUDM_DISPUTE). Expand Record and Case Record Models. Right click on Modeler for Case Records in Dispute Management and select Create. Then upload the standard model into your RMS. Then you can customize the model as you wish. Hope that helps!
Beth

How can I export an image from Illustrator same canvas size and custom resolution?

Hey all. i am using Adobe Illustrator CS5 for creating images for iPhone app icons the size of image 374 px 374 px and 264 ppi. i created an image same size and ppi .the problem after export the image file size changing to 1371px x 1371px and 264 ppi pixel dimension.How can I export same canvas size and same resolution file from illustrator

10111980,
If you just forget about PPI and use Save for Web, you will get the 374 x 374 pixel size.
The 1371 x 1371 pixels is because you somehow increase the resolution by 264/72.
You should never mix pixel by pixel sizes and PPI.
The 374 x 374 pixels is the actual image size. At 264 PPI that will be about 1.417 inches. At 72 PPI that will be about 5.194 inches.

Diff b/w IF/ENDIF and CASE statement?

Hi all,
Plz let me know the difference between IF and CASE statements.Which one is better to be used in general...and are there any specific situations where we have to go for CASE insted of IF.
Rgds,
Reddy.

Hi,
Case statement is good for performance wise because here we declare cases
and according to these cases program will be executed.
When we use if statement then the cursur goes to in the loop, when ever
the loop is not complete till then the programme will not execute.
Thats by in performance basis the case statement is good.
Let me try and explain using an example...
1) For IF statement...
Suppost you have a variable color..and you are checking it against color names.
then your code will be
IF COLOR == 'BLUE'.
    statements
ELSEIF COLOR == 'BLACK'.
    statements.
...and so on....
ENDIF.
But if you use CASE Statement
CASE COLOR.
when 'BLUE'.
   statements.
when 'BLACK'.
statements.
so follows that CASE is easy to use and performance wise is also better.
Regards,
Priyanka.

Diff between decode and case

Hi
I need small clarification about difference between decode and case
Thanks who visit my thread

And for those people who can't be ar$ed to follow links...
Decode allows for conditional output where the conditions are straightforward matches between values.
Case allows for regular conditions to be used such as greater than, less than etc.
Some of the things done by case can be achieved through decode as well but in a more convoluted manner than simply using case.
;)

Decode and Case

Hi,
What is the difference between decode and case?
What are the cases in which we can use Decode and case
Thanx

you can not put Search CASE statements by using DECODE
Eg:
SELECT AVG(CASE WHEN e.salary > 2000 THEN e.salary ELSE 2000 END) "Average Salary" FROM employees e;Can't we?
select avg(decode(sign(e.salary - 2000), 1, e.salary, 2000)) "Average Salary" from employees e;

Increasing canvas size and re-clipping (intentionally)

Hi,
So I bolluxed up a little bit while creating my first full-bleed print piece. I used Ps to edit the image, Ai to add some stuff, and ignored Id completely for the printer. Now I have a perfect 8.5 x 11 image that I want to print all the way to the edges without scaling; I left white bleeds 1.8" but apparently that won't suffice.
I'm trying to go back into photoshop and increase the canvas size (8.75 x 11.25 to include bleeds), and with it, extend the image that was originally clipped when I trimmed the document from a vertical picture (12 x 16 or whatever) to fit the standard letter paper size. When I do that, I get only white areas around the canvas.
Can anyone provide a solution to create full-color bleeds the way they should have been done originally? I have tried changing the canvas size and re-placing another layer of the image behind the existing one (with the hopes that it would clip automatically), but it didn't work. At this point, should I worry about bringing anything into InDesign?
Thanks,
- boda

The Nish Adeel,
> i wants to increase my fla canvas size from all sides...
when we
> increase the size of a file it increases from right and
bottom , i
> want to make it from all four sides like photoshop ...
is there any
> way to do this.
There is a way to do this; unfortunately, it's not an
automatic feature
like in Photoshop. The approach you'll need to take is to
update the
document dimensions (basically, the canvas size) as desired,
then use the
Edit Multiple Frames button on the lower left of the Timeline
panel to
manually move all assets on the main timeline. To do this,
you'll have to
make sure all layers are unlocked. To do this quickly, click
the
Lock/Unlock All Layers button at the top, between the eye and
the square
buttons, until you see that all locks have been removed (one
or two clicks
will do it). In the Modify Onion Markers button next to the
Edit Multiple
Frames button, choose Onion All. Select Edit > Select All,
then use the
arrow buttons to move your assets.
David Stiller
Co-author, Foundation Flash CS3 for Designers
http://tinyurl.com/2k29mj
"Luck is the residue of good design."

OBIEE 11g RPD and case study document required for practice

Hi OBIEE guru's,
Could you please help me by posting OBIEE 11g sample RPD and case study document for creating Answers and Dashboards.
I need to brushup my skills on creating Answers and Dashboards.
Thanks in advance.

Satya,
have you looked at the sample app. This has many different cases and you can "play" with the data yourself. Quite powerful:
http://www.oracle.com/technetwork/middleware/bi-foundation/obiee-samples-167534.html
have fun
alex

Canvas Bags and cases

Similar Messages

Maybe you are looking for