Canvas copy or subclass not working
Hi,
I am trying to copy a canvas from a template form.
This canvas has -
1. Frame
2. Rectangle
3. List Item
4. Two Push buttons.
When I copy this canvas in destination form all the objects are changed to small size, from 100 to 0.1, from 303 to 0.303, all the objects are cluttered.
I tried creating object library and subclassing the canvas from object library, but with same effect as above.
Can anyone guide on this?
Av.
Edited by: Avi4Ora on Mar 31, 2010 3:55 PM
Hi,
When i tried to copy, its copying without any issue. Check whether the Zoom is changed. Try clicking the menu View--> Normal Size.
Regards,
Manu.
If my response or the response of another was helpful or Correct, please mark it accordingly
Similar Messages
-
IiPad 2 has slowed down with ios8 copy paste is not working it hangs when you try to fill up forms ,Apple engineers you need to do something fast
Apple engineers do not participate here. Have you updated to iOS 8.1 which was just release yesterday? Have you done any other troubleshooting? If you haven't start here.
Go to Settings>Safari>Clear History and Website Data
Now close all apps. In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If those three things made no difference, try this. Reset all settings. You will not lose any data, but most of the device settings will have to be entered in the settings app again. Settings>General>Reset>Reset all Settings.
If all of that fails, restore the iOS software. Backup your iPad before you restore, then restore the backup when you are done. If that still doesn't help, restore your iPad as new and start all over again. Most purchased content can be downloaded again at no charge as long as you use the same Apple ID and as long as the content is still available in the store.
Restore iPad to Factory Settings
http://support.apple.com/kb/ht1414
Download Past Purchases
http://support.apple.com/kb/ht2519 -
Copy/paste function not working in Firefox 22. Always good in previous versions
Copy/paste function not working in Firefox 22. Always good in previous versions editions
Well I've uninstalled FF22, thanks for the suggestion.
Chrome works perfectly with ZA and C&P. -
SQL*Plus COPY command does not work
SQL*Plus COPY command does not work in SQL Developer. I am using SQL Developer 1.5.1 on Windows XP.
copy from <source_db_connection> to <target_db_connection> create <target_tab_name> using select * from <source_tab_name>
Does it work on different versions of SQL Developer ?
Anyone had any success in trying COPY command in SQL Developer?
Thanks in advance.While it hasn't been updated for v1.5, this page lists the supported SQL*Plus commands. COPY is explicitly listed as not supported.
theFurryOne -
I reinstalled microsoft word and now have a copy that will not work that is the default
I reinstalled microsoft word and now have a copy that will not work that is the default
I have MS word 2008 for MAC version 12.1
When I left click the MS word applications that is the default seems to be corrupted as indicated by the message below but when I right click i can select the second MS word application that works. The message from the left click is
Process: Microsoft Word [10367]
Path: /Users/geralddowling/Library/Mail Downloads/Microsoft Word.app/Contents/MacOS/Microsoft Word
Identifier: com.microsoft.Word
Version: ??? (???)
Build Info: Unknown-80409~0
Code Type: X86 (Native)
Parent Process: launchd [128]
Date/Time: 2011-07-25 17:25:09.413 -0400
OS Version: Mac OS X 10.6.7 (10J869)
Report Version: 6
Interval Since Last Report: 166920 sec
Crashes Since Last Report: 5
Per-App Crashes Since Last Report: 5
Anonymous UUID: 1C5621D4-1D85-488D-A24C-CB298759DBC6
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/MicrosoftComponentPlugin.framework/Versions/12/M icrosoftComponentPlugin
Referenced from: /Users/geralddowling/Library/Mail Downloads/Microsoft Word.app/Contents/MacOS/Microsoft Word
Reason: image not found
Binary Images:
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <A4F6ADCC-6448-37B4-ED6C-ABB2CD06F448> /usr/lib/dyld
Model: iMac10,1, BootROM IM101.00CC.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 8 GB, SMC 1.53f13
Graphics: ATI Radeon HD 4670, ATI Radeon HD 4670, PCIe, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 2.1.14.5
Bluetooth: Version 2.4.0f1, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST31000528ASQ, 931.51 GB
Serial ATA Device: HL-DT-ST DVDRW GA11N
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0x24300000
USB Device: Cruzer Mini, 0x0781 (SanDisk Corporation), 0x5150, 0x24310000
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0220, 0x24320000
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0x24400000
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0x26500000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000
USB Device: Back-UPS ES 750 FW:841.I3 .D USB FW:I3, 0x051d (American Power Conversion), 0x0002, 0x06400000
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8215, 0x06110000 -
When I try to make a copy of something the arrow just keeps spinning and never allows me to copy.
Hi , Welcome to the HP Forums! I understand that the copy function does not work with your HP Envy 5530. I am happy to look into this copying issue for you! So I have a better understanding of your question. Is this happening when printing from the computer? Or, when you place a sheet of paper on the glass and select copy? If you are trying to print from the computer, what Operating System do you have? Windows or Mac? What version? If you do not know the Operating System you are using, please visit this website. Whatsmyos. In the meantime, please make sure the printer's power cable is plugged directly into the wall outlet, and not a surge protector. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well. Also, you will want to make sure the printer's firmware is up-to-date. Getting Printer Updates for HP Photosmart 5520 e-All-in-One, HP ENVY 5530 e-All-in-One, and HP Deskjet Ink Advantage 4510 and 5520 e-All-in-One Printer Series. Thank you for posting, and hope to hear from you soon! “Please click the Thumbs up icon below to thank me for responding.”
-
Why does the "fix" for firefox copying and pasting not work?
I did the fix a few times and restarted firefox, with no success. Also, I installed the latest version of firefox and it is slower now. I have to use firefox for school, otherwise I would just find another way.
In what way is Firefox slow?
Is this all the time or only with loading web pages?
What kind of fix do you mean with: ''Why does the "fix" for firefox copying and pasting not work'' ? -
Copied layout is not working for Sales order item assinment block
Hi Experts,
I copied the standard componet BT115IT_SLS/items view layout with custom role configuration key and worked fine.
I have added one more field to the item view with the same configuration and saved .When I opended the sales order in the WEB UI , The item assigment block is displaying with complete BTADMINI context fileds and This is the issue.
I have seen configured fields only in the personalization and I have downloaded the items assigment block data to Execl.In the Execl sheet I can able to see the configured fields (availble fileds in the configuration tab in component workbemch) data only.
But Items assignment block is displaying all the fileds (taking from the context node BTADMINI).
I have deleted existing customer configuration and again copied from the standard layout.But I got the same issue.
I have wriiten some code in the ON_NEW_FOCUS and commented the code.Still it not working.
Please help me , where I have done the mistake and provide me some inputs.
Thanks,
VenkkyHi Experts,
Solved isuues myself.
The problem is inconsistency of BTAdminI context node . I have deleted the view enhancement and again enhanced the view .I copied the layout with customer role key and dispalyed expected layout.
Thanks,
Venkky -
Copy Function is Not Working properly In Order Management
Hi,
Description-
When an order with remnant model is copied, it copied only the topple model line and they include items attached to the top model line. It doesn’t copy the
option class lines and the option item lines (unshipped and shipped).
Example-
Enter an order with for pd-pto-model. See order#21231.The ordered quantities and structure of the model is shown below:
pd-pto-model 5 qty
pd-std-item1 (included item) 5 qty
pd-pto-oc (option class) 5 qty
pd-std-item1 (included item with rfr checked) 5 qty
pd-std-item2 (option item with rfr checked) 5 qty
pd-std-item3 (option item) 5 qty
Booked the order and pick relased the order. While shipconfirming only shipped 5 qty of pd-std-item3 and staged the rest. On querying the sales order, the line status is seen correctly as follows:
pd-pto-model Closed
pd-std-item1 (included item) Picked
pd-pto-oc (option class) Closed
pd-std-item1 (included item with rfr checked) Picked
pd-std-item2 (option item with rfr checked) Picked
pd-std-item3 (option item) Partially Interfaced to receivables
Copied this order from the order header. The new order# is 21232.On querying the order, I see only 2 lines as follows:pd-pto-model.
Anyone can help me on this issue.
Thanks,
Chinnahaisrig wrote:
Hi ,
We are facing an issue with select() in Solaris 10. we had written a sample program to this issue.
Program name :- sel.cpp
int main()
struct timeval sleeptime;
sleeptime.tv_sec = 60;
printf("1\n");
select(0,NULL,NULL,NULL,&sleeptime);
printf("2");
return 0;
When i run this program in Solaris 9, its printing 1 and after one minute its printing 2.
When i run this program on Solaris 10, its printing 1 and 2 without waiting for 60 seconds.
When i tried to print tv_usec, its printing as 0 in solaris 9 and some garbage values in solaris 10.
I think because of that the above select function is not working properly in solaris 10.
Why the tv_usec is not taking 0 as default values in Solaris 10?
We are using our legacy code for past 20 years. So, before going to do any changes we are trying to find why this happenig like this.Hi
It sounds to me that you've been lucky for 20 years then.
Local POD variables on the stack that aren't explicitly initialized can contain any value. Here's what I see in your app with dbx
(dbx) run
Running: sel
stopped in main at line 9 in file "sel.cpp"
9 sleeptime.tv_sec = 60;
(dbx) print sleeptime
sleeptime = {
tv_sec = -4198732
tv_usec = 0
}That's on a Solaris 10 SPARC machine. If I try it on a Solaris 10 x86 box then I get
(dbx) print sleeptime
sleeptime = {
tv_sec = -830490588
tv_usec = 134510556
and I see the behaviour that you describe.
Paul -
File copy in KM not working from a par file.
Hi Experts,
We created a par file which will copy a file from a folder and copy this onto a seperate folder under the same parent folder. This applications works well on testing system, but is not working when deployed to the portal server where it supposed to work.
Please give your thoughts and your valuable suggestions on this issue.
Thanks in advace
SateeshHi Raghu,
What is CM system and where it needs to be added.
I am copying the code please check and give your valuable inputs.
import java.util.Properties;
import com.sap.tc.logging.FileLog;
import com.sap.tc.logging.Severity;
import com.sap.tc.logging.TraceFormatter;
import com.sapportals.wcm.repository.CopyParameter;
import com.sapportals.wcm.repository.ICollection;
import com.sapportals.wcm.repository.ICopyParameter;
import com.sapportals.wcm.repository.IResourceList;
import com.sapportals.wcm.repository.ResourceContext;
import com.sapportals.wcm.repository.ResourceFactory;
import com.sapportals.wcm.service.scheduler.ISchedulerTask;
import com.sapportals.wcm.util.uri.RID;
import com.sapportals.wcm.util.usermanagement.WPUMFactory;
public class archiveContent implements ISchedulerTask {
private static final com.sap.tc.logging.Location logger =
com.sap.tc.logging.Location.getLocation("KMScheduler");
public void run( String id, Properties properties ) {
// implement the tasks to be scheduled
logger.setEffectiveSeverity(Severity.ALL);
FileLog mFile1 = new FileLog("/usr/sap/EPD/JC00/j2ee/cluster/server0/log/KMScheduler/reportArchiver.log",10485760,5,new TraceFormatter("%d %m"));
logger.addLog(mFile1);
String Filename=null;
int flag=0;
logger.infoT("Entering Archive Application try block");
try{
com.sapportals.portal.security.usermanagement.IUser epUser = WPUMFactory.getServiceUserFactory().getServiceUser("cmadmin_service");
ResourceContext ctx = new ResourceContext(epUser);
// Get the path of the bi-broadcast (start) folder and create a resource
//RID birid = RID.getRID("/bi-broadcast");
RID birid = RID.getRID("/documents/KMScheduler_test");
// Create resource holding the contents of the bi-broadcast/top level folder
com.sapportals.wcm.repository.IResource bires= ResourceFactory.getInstance().getResource(birid,ctx);
if(bires!=null)
// Create a collection of the bi-broadcast resource and get the child resources i.e. Categories
ICollection categorycollection=(ICollection)bires;
IResourceList categorylst= categorycollection.getChildren();
com.sapportals.wcm.repository.IResource categoryres = null;
if(categorylst!=null)
for(int i=0;i<categorylst.size();i++)
categoryres = categorylst.get(i);
// Check if the Category is Template. if it is do not enter the loop
//if(!categoryres.getName().equalsIgnoreCase("Template"))
// Get the path of the Category folder
//RID categoryrid = RID.getRID("/bi-broadcast/"+categoryres.getName());
//RID categoryrid = RID.getRID("/documents/KMScheduler_test/bi_reports/"+categoryres.getName());
//logger.infoT("Folder ""\"/documents/KMScheduler_test/bi_reports/"categoryres.getName()+"\" detected");
if(categoryres!=null)
// Create a collection of the Category resource and get the child resources i.e. Area
ICollection areacollection=(ICollection)categoryres;
IResourceList arealst= areacollection.getChildren();
com.sapportals.wcm.repository.IResource areares = null;
if(arealst!=null)
for(int j=0;j<arealst.size();j++)
areares=arealst.get(j);
Filename=areares.getName();
// Get the path of the Area folder
RID arearid = RID.getRID("/documents/KMScheduler_test/"categoryres.getName()"/"+areares.getName());
logger.infoT("Folder ""\"/documents/KMScheduler_test/"categoryres.getName()"/"areares.getName()+"\" detected");
if(areares!=null)
// Create a collection of the Area resource and get the child resources i.e. Region
ICollection regioncollection=(ICollection)areares;
IResourceList regionlst= regioncollection.getChildren();
com.sapportals.wcm.repository.IResource regionres = null;
if(regionlst!=null)
for(int k=0;k<regionlst.size();k++)
regionres=regionlst.get(k);
Filename=regionres.getName();
// Get the path of the Region folder
RID regionrid = RID.getRID("/documents/KMScheduler_test/"categoryres.getName()"/"areares.getName()"/"+regionres.getName());
logger.infoT("Folder ""\"/documents/KMScheduler_test/"categoryres.getName()"/"areares.getName()"/"regionres.getName()+"\" detected");
if(regionres!=null)
// Create a collection of the Region resource and get the child resources i.e. File
ICollection filecollection=(ICollection)regionres;
IResourceList filelst= filecollection.getChildren();
com.sapportals.wcm.repository.IResource fileres = null;
if(filelst!=null)
for(int l=0;l<filelst.size();l++)
fileres=filelst.get(l);
// Check if the file is Archive or Special. if it is don not move it to Archive
if(!fileres.getName().equalsIgnoreCase("Archive"))
if(!fileres.getName().equalsIgnoreCase("Special"))
flag=1;
// Get the path of the File in the region folder
RID filerid = RID.getRID("/documents/KMScheduler_test/"categoryres.getName()"/"areares.getName()"/"regionres.getName()"/Archive/"+fileres.getName());
logger.infoT("File ""\"/documents/KMScheduler_test/"categoryres.getName()"/"areares.getName()"/"regionres.getName()"/Archive/"fileres.getName()+"\" detected");
// Move one child at a time to the Archive folder
ICopyParameter cp=new CopyParameter(true);
fileres.move(filerid,cp);
logger.infoT("Archiving file \""fileres.getName()" from folder /documents/KMScheduler_test/"categoryres.getName()"/"areares.getName()"/"regionres.getName()"\"");
else if(fileres.getName().equalsIgnoreCase("Special"))
RID ar_analysisrid=RID.getRID("/documents/KMScheduler_test/"categoryres.getName()"/"areares.getName()"/"regionres.getName()"/Special");
ICollection aranaylsiscollection=(ICollection)fileres;
IResourceList aranalysislst= aranaylsiscollection.getChildren();
com.sapportals.wcm.repository.IResource aranalysisres = null;
if(aranalysislst!=null)
for(int m=0;m<aranalysislst.size();m++)
aranalysisres=aranalysislst.get(m);
if(!aranalysisres.getName().equalsIgnoreCase("Archive"))
flag=1;
// Get the path of the File in the region folder
RID arfilerid = RID.getRID("/documents/KMScheduler_test/"categoryres.getName()"/"areares.getName()"/"regionres.getName()"/Special/Archive/"+aranalysisres.getName());
logger.infoT("File ""\"/documents/KMScheduler_test/"categoryres.getName()"/"areares.getName()"/"regionres.getName()"/Special/Archive/"aranalysisres.getName()+"\" detected in Special folder");
// Move one child at a time to the Archive folder
ICopyParameter cp=new CopyParameter(true);
aranalysisres.move(arfilerid,cp);
logger.infoT("Archiving file \""fileres.getName()" from folder /documents/KMScheduler_test/"categoryres.getName()"/"areares.getName()"/"regionres.getName()"/Special/Archive/"aranalysisres.getName()"\"");
Edited by: Jabi123 on Jan 17, 2011 7:13 AM -
Simple copy of reports not working - help please
Hello
I have this function that was written to copy a given report object to a given folder. The code is not working - the copyObj = col.Copy(obj,2) appears to be failing.
Can anyone shed some light on this? Thank you in advance!
- Russell
My function:
function CopyReport (objID, DestFolder, iStore)
dim col
dim obj
dim copyObj
on error resume next
'QUERY FOR OBJECT TO COPY
str = "SELECT * FROM CI_INFOOBJECTS WHERE SI_ID = " + objID
set col = iStore.Query ( str )
obj = col.Item(1)
'COPY THE OBJECT
copyObj = col.Copy(obj,2)
'SET THE PARENTID OF THE COPIED OBJECT
copyObj.Properties.Item("SI_PARENTID").Value = DestFolder
'SET THE PARENT FOLDER OF THE COPIED OBJECT
copyObj.Properties.Item("SI_PARENT_FOLDER").Value = DestFolder
'COMMIT THE COLLECTION
iStore.Commit(col)
end functionHi All
I've resolved the problem with the copy and am posting the code below. I'd appreciate it if it could be placed in the appropriate forum so that it may be a resource for other developers in the future. I've left in all of my debugging/error checking code for reference as well.
- Russell
The working copy function (with loads of debugging code) is this:
function CopyReport (objID, DestFolder, iStore)
'Function CopyReport
'Parameters:
' objID - the ID of the report to copy
' DestFolder - the ID of the destination folder for the copy
' iStore - the InfoStore to use
'Returns: A text string that is displayed in a web page via response.write that includes the
' name of the report if copied or the error information as appropriate.
dim col
dim obj
dim copyObj
dim newCol
on error resume next
'QUERY FOR OBJECT TO COPY
str = "SELECT * FROM CI_INFOOBJECTS WHERE SI_ID = " + objID
set col = iStore.Query ( str )
If Err.Number <> 0 Then
CopyReport = "iStore.Query failed<br>"
CopyReport = CopyReport + "<br>Error: " & Err.Number & " - " & Err.Description
CopyReport = CopyReport & "<br>" & str
Exit Function
End If
set newCol = iStore.NewInfoObjectCollection()
If Err.Number <> 0 Then
CopyReport = "newCol creation error"
CopyReport = CopyReport + "<br>Error: " & Err.Number & " - " & Err.Description
CopyReport = CopyReport & "<br>" & str
Exit Function
End If
set obj = col.Item(1)
If Err.Number <> 0 Then
CopyReport = "OBJ = col.item(1) error<br>"
CopyReport = CopyReport & "<br>" & str
CopyReport = CopyReport & "<br>Error: " & Err.Number & " - " & Err.Description
Exit Function
End If
'COPY THE OBJECT
set copyObj = newCol.Copy(Obj, 2)
If Err.Number <> 0 Then
CopyReport = "copyOBJ error"
CopyReport = CopyReport & "<br>Count: " & col.Count
CopyReport = CopyReport + "<br>Error: " & Err.Number & " - " & Err.Description
' Exit Function
End If
'SET THE PARENTID OF THE COPIED OBJECT
copyObj.Properties.Item("SI_PARENTID").Value = DestFolder
If Err.Number <> 0 Then
CopyReport = "Error setting SI_PARENTID to " & DestFolder
CopyReport = CopyReport + "<br>Error: " & Err.Number & " - " & Err.Description
Exit Function
End If
'SET THE PARENT FOLDER OF THE COPIED OBJECT
copyObj.Properties.Item("SI_PARENT_FOLDER").Value = DestFolder
If Err.Number <> 0 Then
CopyReport = "Error setting SI_PARENT_FOLDER to " & DestFolder
CopyReport = CopyReport + "<br>Error: " & Err.Number & " - " & Err.Description
Exit Function
End If
'COMMIT THE COLLECTION
iStore.Commit(newCol)
If Err.Number <> 0 Then
CopyReport = "Commit error"
CopyReport = CopyReport + "<br>Error: " & Err.Number & " - " & Err.Description
Exit Function
End If
'Return the object info
CopyReport = copyObj.Title
end function
Edited by: Russell L Magidson on Dec 11, 2008 5:12 PM
Edited by: Russell L Magidson on Dec 11, 2008 10:28 PM
Edited by: Russell L Magidson on Dec 11, 2008 10:29 PM -
Dreamweaver copy and paste not working
Hi
The copy and paste functions on my Dreamweaver have stopped
working.
The copy and paste functions are greyed out in the edit drop
down in both code and design views. Ctr C and V are also not
working.
Tried various fixes including moving the config folder and
reinstalling but nothing has worked.
Any suggestions?
Thanks
DirkYou can try this simple fix -
Quit DW.
Find this folder -
C:\Documents and Settings\<username>\Application
Data\Macromedia\Dreamweaver
8\Configuration\WinFileCache-*.dat
(these folders are normally hidden - you may have to use
Explorer > Tools >
Folder Options to unhide them)
and delete it.
Restart DW. Works better?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"dirkwalker" <[email protected]> wrote in
message
news:ebhgfi$8qj$[email protected]..
> Hi
>
> The copy and paste functions on my Dreamweaver have
stopped working.
>
> The copy and paste functions are greyed out in the edit
drop down in both
> code
> and design views. Ctr C and V are also not working.
>
> Tried various fixes including moving the config folder
and reinstalling
> but
> nothing has worked.
>
> Any suggestions?
>
> Thanks
>
> Dirk
> -
Copy\Paste Views not working in SCOM 2012 R2 console
Dear Concern,
Hi, I am using SCOM 2012 R2 and i have come across a problem that when i copy a view and try to paste it in same management pack, the paste action is not working. Cut and paste is working fine but copy paste not working. When i copy any view, the paste option
come alive but did not work when i clicked on it.
Has anyone tried and tested it?
Regards,
Jazeel Ahmed SiddiquiHi,
I have tested it in my SCOM 2012 SP1 Environment and it worked there from Sealed to Unsealed and Unsealed to Unsealed.
I have no R2 Environment in reach at Moment so i cannot test it there.
Cheers
Christoph Maresch | My blogs: blog.cmaresch.at | XING:
Christoph Maresch
| Linkedin:
Christoph Maresch -
Copy expression only not working
I'm working on AE CC 2014.
Copy expression only is not working, I'm not sure if it's not copying anything or not pasting what it copied. But no expression is being applied to the other layers as it used to be the case before.Hey Tim,
I filed a bug report with Adobe as you asked.
When you said the problem went away are you positive the only thing you did was switch applications? What's happening now is that I select Copy expression only and then try and paste and nothing happens, but then the entire menu is grayed out (see attached) until I purge everything, at what point the issue starts all over.
I also tried switching to other applications and copying something random there to see if I can unclog the clipboard, but nothing seems to work.
I haven't been able to make the problem go away.
Best,
David. -
Copy inspection results not working
Dear Gurus,
I made the settings required for copying inspection results and it is working on the QA server, but it is not working on the PROD server although I'm making the same settings. When I go to transaction QA32 and go for results recording in the required operation, I press "Edit" but I don't get the "Copy inspection results" choice.
Any ideas??
Regards,
MaXGo through following docs
http://help.sap.com/saphelp_dimp50/helpdata/en/00/07cf2ec3b42046aeeb527773165efc/content.htm
Re: SPRO Settings: COPY INSPECTION RESULTS DURING RESULTS RECORDING
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/bpx-community/enterprise-resource-planning/guideline%20to%20copy%20inspection%20result%20from%20one%20lot%20to%20another.pdf
Maybe you are looking for
-
Visual Composer 7.0 on SAP 2004s
Hi All, I have installed SAP 2004s on my server. I also want to install VC 7.0 on this. Can anyone let me know whether VC is automatically installed with 2004s or we need to install it seperately? Also, if it it comes with 2004s how can we configure
-
Need some help in understanding Capturing Phase .
Hi , I have some confusion in understanding Capturing Phase . I have described a scenario below , please let me know will this be an example for Capturing Phase ?? Assume i have a Form containing a Button inside a Application Container . When the But
-
Western Digital My Book Live iTunes files missing
I have a Western Digital My Book Live in which I keep my iTunes Library on. Last night we watched a movie on Apple TV streeming from iTunes. When I got up this morning to connect to itunes on the computer it said "iTunes Library cannot be found" So I
-
Can't load about:newtab page in new tab
Hello, A recent hack attack from Bing has reset the value in browser.newtab.url to their search page. I keep trying to reset it to about:newtab but when I click OK the URL remains the same and my changes are ignored. What can I do about this? I reall
-
Picture backup is also part of the workflow
Hi, I'm very happy with all new features of v1.1. But I think picture backup is also part of the workflow. It would be very clever to keep track (from inside LR catalog) of where pictures have been backed-up. You'll find solutions like CDFinder/CDWin