Canvas not proportional to 720x480 format
My Canvas is smaller (narrower) than the 720x480 QT movies I export from FCP so everything appears slightly squished as it expands to fit the wider format. How can I get a truer read on the canvas and not the mild distortion?
Park your playhead over a 720x480 clip, then from the zoom drop menu at the top center of the Canvas, choose 100%, then grab one of the canvas corners and resize.
Similar Messages
-
How can I convert OPENGL canvas graphics into bitmap image format.
I used the following code... but no conversion made... plz tell the write way..
public static void savePaintingJPG(GLCanvas canvas, String fileName) {
// saves the content of the 'panel' in a file 'file'.jpg
String name = "";
int framewidth = canvas.getSize().width; // get the canvas' dimensions
int frameheight = canvas.getSize().height;
System.out.println(framewidth);
System.out.println(frameheight);
java.nio.ByteBuffer pixelsRGB = BufferUtils.newByteBuffer(framewidth * frameheight * 3); // create a ByteBuffer to hold the image data
GL gl = canvas.getGL(); // acquire our GL Object
// read the Frame back into our ByteBuffer
gl.glReadBuffer(GL.GL_BACK);
gl.glPixelStorei(GL.GL_PACK_ALIGNMENT, 1);
gl.glReadPixels(0, 0, framewidth, frameheight, GL.GL_RGB, GL.GL_UNSIGNED_BYTE, pixelsRGB);
int[] pixelInts = new int[framewidth * frameheight*3]; // Convert RGB bytes to ARGB ints with no transparency. Flip image vertically by reading the
// rows of pixels in the byte buffer in reverse - (0,0) is at bottom left in OpenGL.
int p = framewidth * frameheight * 3; // Points to first byte (red) in each row.
int q; // Index into ByteBuffer
int i = 0; // Index into target int[]
int w3 = framewidth*3; // Number of bytes in each row
for (int row = 0; row < frameheight; row++) {
p -= w3;
q = p;
for (int col = 0; col < framewidth; col++) {
int iR = pixelsRGB.get(q++);
int iG = pixelsRGB.get(q++);
int iB = pixelsRGB.get(q++);
pixelInts[i++] = 0xFF000000 | ((iR & 0x000000FF) << 16) | ((iG & 0x000000FF) << 8) | (iB & 0x000000FF);
BufferedImage bimg = new BufferedImage(framewidth,frameheight,BufferedImage.TYPE_INT_ARGB);
bimg.setRGB(0,0,framewidth, frameheight, pixelInts, 0, framewidth);
try
File imageFile = new File("final.jpg");
File imagf = new File("final.png");
File image = new File("final.bmp");
ImageIO.write(bimg, "jpg", imageFile); // saves files
ImageIO.write(bimg, "png", imagf);
ImageIO.write(bimg, "bmp", image);
System.out.println("Success");
catch (IOException e) {
e.printStackTrace();
}You want to convert it to an array of what? Of numbers? Of LabVIEW colors?
The "Read BMP File.vi" VI outputs a 1-D array of the pixels, but I suspect it is not exactly in the format that you need. I am NOT sure, but I think that each group of 3 elements of that 1-D array (which is inside the cluster "image data" that the VI outputs) represents the red, green and blue levels of a single pixel (but it may be hue, saturation and lum.). Also, since it is a 1-D array, you would have to divide it by the width (which is also included in the "image data" cluster) to get some sort of 2-D array of data.
You can find the "Read BMP File.vi" VI in the functions palete> "Graphics & sound">"Graphics Formats". -
The document does not have a valid format.
I created a special format document when I had Pages '08. I needed the proportions of the document to match the special paper on which the document would be printed so I created a special size for my document rather than 8 1/2 x 11. If I remember right it was closer to 8 1/2 x 13 or so. Anyway, I have now upgraded to Pages '09 and can no longer open any of these special format documents. I have versions of a couple of the documents that were created in Pages '08 without the special proportional size page and they open without issue. However the special size documents all get "The document does not have a valid format" and will not open. I really NEED these documents. I have seen some posts about renaming to a .zip and then something about an index file but I don't understand where this index file might be and what good it will do to open it. Also I know the files exist because they are still showing their original file sizes (not 0 MB). Any assistance would be appreciated.
Don't continue to search fruhulda.
I never saw such files.
The only things which I may recognize are :
the strings :
mluc
(10) nbNO --> Norvegian
(16) svSE --> Sveridge
(4) fiFI --> Finnish
(1) daDK --> Danish
(17) zhCN --> Chineese(1)
(5) frFR --> French
(8) jaJP --> Japanese
(3) enUS --> English (US)
(12) ptBR --> Portuguese (Brasil)
(15) esES --> Spanish
(18) zhTW --> Chineese(2)
(14) ruRU --> Russian
(9) koKR --> Korean
(6) deDE --> Deutch (Germany)
(2) nlNL --> Dutch (Nederland)
(7) itIT --> Italian
They are the symbols used to identify the languages used for 16 versions
Two others are missing:
(11) Polish (Polska) missing
(13) Portuguese (Portugal) missing
I found also
iMac in plain ASCII and .i.M.A.C (dots are in fact NIL characters) which is the Utf 16 representation of iMac.
During a few seconds I thought that it was a piece of System Files but the page thumbnail must be available somewhere so that the Finder is able to display it.
I will send these genetically modified documents to Apple Bugs Hunters.
Yvan KOENIG (VALLAURIS, France) lundi 31 janvier 2011 17:46:39
At the very end there is also the trailing string which fool the message parser:
the formula : *_Copyright Apple, Inc., 2010 -
Elements 10 canvas not working with tiff images; works fine with jpegs. What to do?
Elements 10 canvas not working with tiff images; works fine with jpegs. What to do? It does not allow me to add a colored canvas, only a blank canvas.
Perhaps some of the tiffs are already layers.
In other words, since jpegs don't support layers, they all ways open with one locked background layer, but the tiff format does
support layers so the tiffs don't have to have a locked background layer and can already be a regular layer that supports transparency.
For the tiffs you could add a new color fill layer below and use the color you want the enlarged canvas to be.
On pse 10 look at the bottom of the layers panel for the new adjustment of fill layer icon -
Processing this item failed because of a PDF parser error. Input string was not in a correct format.
Good Morning,
We're having issues parsing several hundred PDF files located in two separate Record Center sites. All other PDF documents in the environment are being crawled and parsed without issue. I've verified the permissions for the Search service account, but that
doesn't seem to be the issue. Searching for this particular error hasn't returned much, but I have ensured that the Search service account has been added to the necessary Local Security Policy objects and cleared the configuration cache. Any help would be
greatly appreciated.
Processing this item failed because of a PDF parser error. ( Error parsing document 'https://asdf.com/sites/HRRecords/asdf.pdf'. Input string was not in a correct format.; ; SearchID = 6642FEEF-6921-434E-B084-02809173D8A7 )This issue came back up for me as my results aren't displaying since this data is not part of the search index.
Curious if anyone knows of a way to increase the parser server memory in SharePoint 2013 search?
http://sharepoint/materials-ca/HPSActiveCDs/Votrevieprofessionnelleetvotrecarrireenregistrement.zip
Processing this item failed because the parser server ran out of memory. ( Error parsing document 'http://sharepoint/materials-ca/HPSActiveCDs/Votrevieprofessionnelleetvotrecarrireenregistrement.zip'. Document failed to be processed. It probably crashed the
server.; ; SearchID = 097AE4B0-9EB0-4AEC-AECE-AEFA631D4AA6 )
http://sharepoint/materials-ca/HPSActiveCDs/Travaillerauseindunequipemultignrationnelle.zip
Processing this item failed because of a IFilter parser error. ( Error parsing document 'http://sharepoint/materials-ca/HPSActiveCDs/Travaillerauseindunequipemultignrationnelle.zip'. Error loading IFilter for extension '.zip' (Error code is 0x80CB4204). The
function encountered an unknown error.; ; SearchID = 4A0C99B1-CF44-4C8B-A6FF-E42309F97B72 ) -
Hello - I just purchased an iPhone 4s and would like to use iCloud but my apple id is not in email address format so when i try to sign into iCloud it won't let me use my apple id. i tried to change my apple id through my account settings but could not find a way to do that. i found ways to change everything else in my settings but when i pushed on the edit button to change my apple id the page didn't change. Not sure how i can get to use iCloud? Please help.
You change the name of your ID at https://appleid.apple.com. See http://support.apple.com/kb/HE40.
-
Pages document "could not be read" bc. it "does not have a valid format"
The document in question was properly saved and Pages was not open when my computer hung as it was shutting down. MS Word would not quit or force-quit and I had to hard restart the computer. When I later tried to open this Pages document, which I had been working on before Word froze, Page would not open it and responded with the error message: "This document "document_name.pages" could not be read. This document does not have a valid format." When I looked at the document in question I noticed that its file size was 0KB. I have no idea why this happened, but I suppose it has to do with my computer not shutting down properly and perhaps with Word freezing. If I repair my drive permission, re-index it, anything, will it help? Just a note on the status of this machine: spotlight stopped working earlier this morning and I was waiting to finish this document before repairing disk permissions and trying to fix that issue with Spotlight.
In the meantime I have tried various fixes. First I tried to change the file ending to .zip, unpack it and open it. Then the same, but this time I tried to view package contents. It doesn't show up in the contextual menu as even having a package to show the contents of. The file is effectively empty, but I don't know where the contents went! The funny thing is that the MS Word doc was recovered automatically. Is it possible that Pages doesn't have an auto-recovery mechanism?
I need this file urgently, or at least the text in it. It is the bibliography of an important paper due tomorrow at 5 pm.Any advice or suggestions would be greatly appreciated.
BTW, I have used a file-recovery program in the past. It is called "Stellar Phoenix" and it worked wonderfully to find a Word doc that I accidentally deleted. It can't find .pages document though. In order to do so, I would need to tell the program what the average file size is, as well as the header information as follows. "Header (in hexadecimal)" "At Offset (in decimal)". I have no idea what this means, but if I could insert it, perhaps it could find the lost data. Should I have it search for .pages, .zip, .xml? I'm at a loss, but I know that it doesn't recognize .pages. In the meantime, I sent a support email to them and will see what happens.
Thank you for your help.
DavidI can't respond before.
When the system say that your file size is 0KB, it means that nothing was saved. Only a file descripto exists.
So, there is nothing to recover.
Given the time the system crashed, you may have :
(1) a simple descriptor with nothing written
(2) a folder with every or only some of the required files.
In this case, Phoenix is useless : it's unable to revive a folder.
(3) a flatfile (a compressed version of the folder named above). It's only this kind of file which Phoenix may revive.
With a bit of luck, Phoenix would be able to revive the index.xml file which was in the original folder created in the temporary folder.
This file starts with :
<?xml version="1.0"?><sl:document xmlns:sfa="http://developer.apple.com/namespaces/sfa"
or
<?xml version="1.0"?>
<sl:document xmlns:sfa="http://developer.apple.com/namespaces/sfa"
The minimal size for a Pages index.xml file is : 520038 bytes.
If you retrieve the index.xml file, we may try to rebuild an usable package.
Ask the recovery tool to transfer the recovered file on an other media.
If the document embedded pictures, the index will give their path and their size which may be useful to recover them.
Yvan KOENIG (VALLAURIS, France) lundi 1 novembre 2010 10:27:44 -
Initial-page-number not working in RTF format output
A report has a parameter for the page number to start with. In rtf template below code is present
<?initial-page-number:xdoxslt:ifelse(P_FIRST_PAGE_NUM!=’’,number(P_FIRST_PAGE_NUM),1)?>
The report page number starts with the value which we pass in p_first_page_num in PDF format but in rtf format output it always starts with 1.
Is initial-page-number not supported in RTF format output ? If not then what is the alternative?the method u followed is fine as need a page number staring from a specify value which u input.
@section is only for resetting page number to 1 for every group and for that pdf and ppt will be fine but only for rtf u need to use that ( pressing F9).
u can use @section and initial page number combined but they give u same output as get now. rtf output wont support it will only reset 1 every time
What ever u do rtf output wont support initial page number code ..........
i mentioned that F9 work around to mention that it is the only work around u have upto now to control rtf output with regards to page number.
Guru's correct me if i am wrong. wait for a day or two if some one from guru's confirm it .
If u need real confirmation raise an SR oracle will let u know . -
Data is not converting in XML format in output while download in report
Hi All, While downloading the report in XML format value '&' is not changing its XML format '&', but showing in debug mode and sam thing while download its not showing in output. showing in debug like; MS NA - DCS Tooling & Automation but in output showing the data like: MS NA - DCS Tooling & Automation because of this getting issue. Please help me out . Thanks and Regards Sankil
In that case, it is correct.
Try replacing & with & before downloading xml in case you want & to appear as & in web browser view. -
How Do i create a list that will show in a dropdown box with the list being pulled from another tab and not the cell data format junk?
I currently run OS X 10.10.1
Now i have been trying to work on this for a while now and what i want to do should be simple but its apparently not.
Here is an example of what i want to happen.
I will have 2 tabs: Contact | Sales
Now Contacts will have the list of names and various information about a customer, While Sales will have one drop-down box for each Cell Row that will show the names of the person in tab contacts
for what i am wanting to do i cant use the data format pop-up menu because the list is edited everyday several times a day.
Now how do i do this, Excel can do this so how can numbers do it?Hi Shegra,
Paste this into a applescript editor window and run it from there. In the script you may need to adjust the four properties to agree with your spreadsheet. Let me know if you have any questions.
quinn
Script starts:
-- This script converts column A in one table into an alphabetized list of popups. It copies the last cell in that column. Then reverts the column to text. It then refreshes popups in column A of a data table starting with a user defined row.
property DataEntrySheet : "Sheet 1" --name of sheet with popups to be refreshed
property DataEntryTable : "Sales" --name of table with popups to be refreshed
set copyRange to {}
property PopValueSheet : "Sheet 1" --name of sheet with popup values table
property PopValueTable : "Contacts" --name of table with popup values
set PopStartRow to {}
tell application "Numbers"
set d to front document
set ps to d's sheet PopValueSheet
set pt to ps's table PopValueTable
set s to d's sheet DataEntrySheet
set t to s's table DataEntryTable
set tf to t's filtered --this records filter setting on data Entry Table
display dialog "Start from row #..." default answer "" with icon 1 -- with icon file "Path:to:my.icon.icns" --a Week # row
set PopStartRow to {text returned of result}
tell pt --convert list to alphabetized popups
set ptRows to count rows
set copyRange to ("A2:" & name of cell ptRows of column "A")
set selection range to range copyRange
set selection range's format to text
sort by column 1 direction ascending
set selection range's format to pop up menu
-- popupsmade
set selection range to cell ptRows of column 1 of pt
set v to value of cell ptRows of pt
end tell
activate application "Numbers"
tell application "System Events" to keystroke "c" using command down
tell pt
set selection range to range copyRange
set selection range's format to text
end tell
tell t
set filtered to false
set tRows to count rows
set pasteRange to ((name of cell PopStartRow of column "A") & ":" & (name of cell tRows of column "A"))
set selection range to range pasteRange
tell application "System Events" to keystroke "v" using command down
set filtered to tf
end tell
end tell -
Urgent: SQLException: Internal Error: Image is not in 8.1 format
Hello there,
I have never come accross such error.
Scenario
1 using JDeveloper EA1, Database 9i (9.2.0.6)
2 calling Oracle package procedure with in/out parameters.
3 Package has been imported into jDeveloper (jPublisher) with defaults settings.
4 procedure call is successfull, but when accessing out value getting this error
Code
try{
// imported package
PailinWebPolicy webPolicy=new PailinWebPolicy(conn);
System.out.println("web issue policy");
// call of package procedure both parameters are in/out
webPolicy.issuepolicy(policyData,errors,processStatus);
System.out.println("web issue policy done");
result=processStatus[0];
System.out.println("result assigned policy length "+policyData.length);
Wtpolicycore resultPolicy=policyData[0];
System.out.println("policy data assigned");
// error at accessing getPolicyno
String policyRef =resultPolicy.getPolicydata().getPolicyno();
System.out.println("policy ref assigned");
catch(SQLException e)
System.out.println("Exception "+e);
System.out.println("Exception "+e.getErrorCode()+" state "+e.getSQLState());
opus.close();
output:
web issue policy
web issue policy done
result assigned policy length 1
policy data assigned
Exception java.sql.SQLException: Internal Error: Image is not in 8.1 format
Exception 17001 state null
Any idea what might be wrong? I dont see any error on db side at all.
ferdo
Message was edited by:
frpkooI found similar bug reported on Metalink on April 8,2005
Bug no 4294423
Getting java.sql.SQLException: Internal Error: Image is not in 8.1 format Error Code: 17001 When running JDBC program that access many User defined Types .
But cannot find out what is the status of it.
Any idea?
ferdo -
I am running InDesign CS5.5 and trying to open an In Design File but getting an error message. " Cannot open the file "PDavidLCover.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file me be open in another application."Please help I really need to get this file open.
Since you've shown us the folder contents it's a good bet it isn't in use (no lock file). And it doesn't look like the file is mis-named as there doesn't seem to be anything else there that would be the .indd file (but just in case, open it in TextEdit and paste the first few lines here so we can see what the file header says), so the most likely case is the file is damaged. Is that on a removable device of some sort?
You can try the tool at Repair corrupt InDesign Adobe files on Mac OS X or send me a link to the file by private message and I'll try the recovery tool I have for Windows. -
Help with Oracle Connection- "Input string was not in a correct format"
Hello, can some one, anyone please help me. I have a simple VS 2005 C# application that connects to oracle. I've set it up to take the username, password and tnsname as arguments. I am using Client 9i, version 9.2.0.401 of Oracle.DataAccess.dll, and .NET Framework 2.0.
It works fine when I run it from VS 2005, I have also set up a test machine w/o VS 2005 and ran my install package and it runs fine. I sent it to one of my co-workers and when he tries it the OracleConnection obect fails with the error.
"Input string was not in a correct format"
strange in that it is not an ORA error, just the identifed text!?
Here is the code:
## begin code
OracleConnection dbc = new OracleConnection();
string sConnectString = "User Id=" + username.ToString() + ";Password=" + password.ToString() + ";Data Source=" + tnsname.ToString();
dbc.ConnectionString = sConnectString.ToString();
MessageBox.Show("Attempting to Connect to Oracle");
dbc.Open();
MessageBox.Show("Connected to Oracle: " + dbc.ServerVersion);
## end code
Pretty basic, what could be going on?
Since this only happens with an installation, I put in the message boxes to verify exactly where it chokes. I get the first message box, then an error with the identified text. I've seen a number of posts regarding input string format problems, but not a one dealing with OracleConnection.Open(). I added all the ToString() calls just to make sure everything was a string but it did not change the end result.
Anyone? Thanks In advance!
Eric S.Hello,
well, i got a message "...string not wellformed format...", too.
If you have defined the parameters as string, you don't need the additonal "ToString()". Please ckeck your tnsnames -string. Try to debug this. I believe you have copy the format from the tnsnames.ora and there you have much brackets.
For example, two code snippets:
As datasource i use <Server>:<Port>/<Instance>
try
string FDsn ="User Id="+FDbUser+";Password="+FDbPwd;
FDsn +=";Data Source=wth5:1521/Ora9.wth5";
FConn = new OracleConnection(FDsn);
FConn.Open();
if (FConn.State == ConnectionState.Open )
FConn.Close();
catch (Exception ex)
FStateMsg = "Connection to database failed. Check Configuration in parameter: ConnectionString. " + ex.Message;
Above i connect to a Ora 9.2.0.1
by using
FDsn +=";Data Source=wth5:1522/XE";
i connect to an OraExpress database on the same machine.
My Oracle.dataAccess.dll ist the newest, 10.2.... and it runs under Framework 1.1.x and Framework 2.x
I'll hope it will help you. Best regards! -
Hi All,
We have a scenario of FTP-->PI---> Webservice. While triggering the data in the FTP, it is failing in the PI with the below error
SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to read request. ---> There is an error in XML document (1, 447). ---> Input string was not in a correct format.
Can you please help?Hi Raja- It seems to be a data quality issue.
Check for the value @ 1447 position in the xml message that you are trying to send to web service..
may be a date filed/decimal value which is not in expected format. -
Using Keynote '09 on an iMac OS 10.8.4. Two of my students saved a Keynote file then the next day when trying to open received an error message- The document "4b Molly.key" could not be read. The document does not have a valid format. The students are saving correctly. Any ideas how we can retrieve a working file? Why did this happen?
Just tagging on as I encounted this problem this morning. I'm using Mavericks, on MBP (late 2013).
Have both Keynote 5 and 6 - tried to open the file in both, to no avail. I have also tried the renaming of .key to .zip that seemed to work for others with previous OS, but does not fix now. Also tried uploading to iCloud, renaming, redownloading - no fix there either. I've tried to open on iPad and on a different user's iMac - again, get the same error.
It worked yesterday and the day before. It is a large file; however, I realized that from last night to this morning the only different thing I did was that I inserted photos in the keynote deck by drag & drop verses Insert/Choose and wondering if this corrupted the file.
I'm going to hope a fix is out there somewhere and that I don't have to spend hours upon days upon weeks redoing this 98+ page deck.
Any suggestions?
Maybe you are looking for
-
How to slave a Macbook pro with no OS
Helping a friend who just got a (Macbook pro 2) secondhand without any OS installed (HD wiped clean). He is replacing his current MB Pro that is running 10.4.11. I hoped a USB to USB would allow the new computer to be recognized as a HD on the deskto
-
Problems mounting Hitachi 7k3000 HDD in Voyager Q dock via eSATA
I have two NewerTech Voyager Q- Quad Interface SATA 2.5" & 3.5" Drive Docks http://eshop.macsales.com/item/NewerTech/FWU3ES2HDK/ from OWC.com that are advertised as compatible with 3TB SATA III Hitachi drives. I am using one as a main data drive, and
-
WebUtil WUC-121 (ORA-04060) Error In Windows
Hi all, When I want to use WebUtil_FIle_Transfer.Client_TO_DB statement: Result := WebUtil_File_Transfer.Client_To_DB('c:\temp\temp.doc', 'Letters', 'Letter_Text', 'Letter_no = 1200', False, ''); I receive ORA-04060 ("insufficient privileges to execu
-
What is the best version of Skype for Mac OS X Version 10.7.3
What is the best version of Skype for Mac OS X 10.7.3 users?
-
HT4623 can i update my ios software in 3g network not in wi fi.
can i update my ios software in 3g network not in wi fi