Canvas/Viewer is blank when moving scrubber along a video

When moving the scrubber up and down the time line i can hear the audio but nothing shows in the viewer/canvas, when I hit play Final Cut Stops responding and the spinning ball comes up. How can I solve problem? This happens in all my events and projects. I've been searching all day for a solution but nothing i do seems to works. Please help, thanks.
Final Cut Pro 10.0.8
Processor 2.3 GHz Intel Core i5
Graphics Intel HD Graphics 3000 384 MB
Memory 4 GB 1333 MHz DDR3

That fixed it! Thanks very much gogiangigo and David. Wow, that's quick service, you both answered my question inside of a minute. And both of you are in the UK. I wonder what time it is there? Here in New Mexico, USA, it's 2:30 AM.
Anyway, I appreciate the help. (I don't even know what Alpha is, or how I chose it, but all is well now and I have the video back in the viewer).
Tom

Similar Messages

Viewer goes blank when selecting an adjustment

I'm probably overlooking something. When I attempt to make an adjustment images in a new project, Aperture has started doing something strange. All of the images in this project are .jpg. After first importing the images, I was able to successfully adjust a handful of the images with no problem.
OK, so I first noticed this when I tried to use the Red Eye Tool. First, I enlarged the image to 100%, adjusted the diameter of the Red Eye tool. Then clicked on the first "red eye." For about 1/2 second the yellow circle appeared around the target. Then the image disappeared, leaving just the Viewer background color visible. The processing message and widget appeared at the bottom of the Viewer. After a minute of this I clicked on the Adjustments tab and no adjustments are available - it just shows an outline of where the adjustments usually are.
If I click on the Browser view, the images reappear. There is a new version that has 1. The first Red Eye adjustment or 2. If an adjustment panel was clicked on the adjustment checkbox shows checked. After that the second Red Eye adjustment can be applied or the adjustment panel stays functional. It seems like once the initial adjustment selection / disappearing image cycle is done, all of the adjustments work fine. Even multiple adjustments are no problem.
So, I would certainly appreciate any suggestions if you have experienced this problem!
Craig

Did some more fiddling, but still no closer to a resolution. It seems that any adjustment causes the image to be automatically stacked with the image to be modified under the original image. I checked preferences and the Automatically stack new versions is not checked.

Mail body is blank when moved to mailbox

Hi all;
Recently (after Maverick was installed?), the mail that I organize into mailboxes (moved from my Inbox) is showing up with blank content. I regulary use three machines; the issue presents on my MacBook Air and my 27" iMac; the MacBook Pro seems to be OK.
Wassup?
Thanks;
Chris

Aha!
I figured it out. The names of the folders (mailboxes) into which I moved my archived mail (sent and received) started with a tilde (~) so that they were grouped. Removing the tilde seems to have solved the problem; all the missing text reappeared!
Chris

Diagram goes blank when bpel file is outside default dir

Hi,
I am using JDeveloper v10.1.2.1.0 and the “Diagram view” goes blank when I take the “.bpel” file from the project root directory (the default location) to some other directory, even though I modify the references accordingly. My suitcase looks like this:
<BPELSuitcase>
<BPELProcess id="TaskAssignment" src="../../bpel/TaskAssignment.bpel">
<partnerLinkBindings>
<partnerLinkBinding name="client">
<property name="wsdlLocation">TaskAssignment.wsdl</property>
</partnerLinkBinding>
</partnerLinkBindings>
</BPELProcess>
</BPELSuitcase>
The project compiles successfully with “rebuild”, the “Source” tab allows me to see the BPEL source code, but the “Diagram view” remains blank. Why?
Thanks,
Manuel

I have the similiar issue even when the BPEL file is not touched or moved. This happens in I use the email activity.

<partnerLink name="client" partnerLinkType="client:AdaptationNotifier"
myRole="AdaptationNotifierProvider"
partnerRole="AdaptationNotifierRequester"/>
<partnerLink name="AdaptationService"
partnerLinkType="ns3:AdaptationService_PL"
partnerRole="AdaptationService_Role"/>
<partnerLink name="NotificationService"
partnerRole="NotificationServiceProvider"
partnerLinkType="ns1:NotificationServiceLink"/>
</partnerLinks>

<variables>

<variable name="inputVariable"
messageType="client:AdaptationNotifierRequestMessage"/>

<variable name="outputVariable"
messageType="client:AdaptationNotifierResponseMessage"/>
<variable name="Invoke_1_logMessage_InputVariable"
messageType="ns3:AdaptationService_logMessage"/>
<variable name="Invoke_1_logMessage_OutputVariable"
messageType="ns3:AdaptationService_logMessageResponse"/>
</variables>

<sequence name="main">
<receive name="Receive_Notification_Message" partnerLink="client"
portType="client:AdaptationNotifier" operation="initiate"
variable="inputVariable" createInstance="yes"/>
<scope name="Scope_1">
<scope name="Email_1">
<bpelx:annotation>
<bpelx:pattern patternName="bpelx:email"></bpelx:pattern>
</bpelx:annotation>
<variables>
<variable name="varNotificationReq"
messageType="ns1:EmailNotificationRequest"/>
<variable name="varNotificationResponse"
messageType="ns1:ArrayOfResponse"/>
<variable name="NotificationServiceFaultVariable"
messageType="ns1:NotificationServiceErrorMessage"/>
</variables>
<faultHandlers>
<catchAll>
<invoke name="Invoke_1" partnerLink="AdaptationService"
portType="ns3:AdaptationService"
operation="logMessage"
inputVariable="Invoke_1_logMessage_InputVariable"
outputVariable="Invoke_1_logMessage_OutputVariable"/>
</catchAll>
</faultHandlers>
<sequence name="Sequence_1">
<assign name="EmailParamsAssign">
<copy>
<from expression="string('Default')"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns1:FromAccountName"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns1:Bcc"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns1:Cc"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns1:ReplyToAddress"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns1:Subject"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns1:To"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns1:Content/ns1:ContentBody"/>
</copy>
<copy>
<from expression="string('text/html; charset=UTF-8')"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns1:Content/ns1:MimeType"/>
</copy>
<copy>
<from expression="string('Default')"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns1:FromAccountName"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns1:Bcc"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns1:Cc"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns1:ReplyToAddress"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns1:Subject"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns1:To"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns1:Content/ns1:ContentBody"/>
</copy>
<copy>
<from expression="string('text/html; charset=UTF-8')"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns1:Content/ns1:MimeType"/>
</copy>
</assign>
<invoke name="InvokeNotificationService"
partnerLink="NotificationService"
portType="ns1:NotificationService"
operation="sendEmailNotification"
inputVariable="varNotificationReq"
outputVariable="varNotificationResponse"/>
</sequence>
</scope>
</scope>
</sequence>
</process>

Canvas view shows only blank cavas

When I went to re-open a file I was working on during my last session, I am now unable to view any of the the objects in the "editing" view of Xcelsius. The canvas is completely blank (basic blue background, no grid showing).
However, when I go to preview the object, the .swf build/result is fine, just as I left it, and I can edit the objects (blindly) in the bject browser. I can not figure out whay this is so - is this human (my) error, or is there a fix?
BTW - this does not occur in other files that I have been working on, nor does it occur is previous versions of the same file that I have saved in the past.
Please advise.

Jamie,
This is what i do whenever i face this problem...
--> Open a new blank canvas
--> Copy all the objects from Object Browser from your old dashboard and paste it in new blank new canvas
You should be able view the dashboard
Hope this helps...
-Anil

CS3 Design View blank when body in Editable area

Anyone run into this? It appears to be a bug, possibly new in
DW CS3 (9.0 build 3481)
When a <body> tag is put in an editable region, DW does
not recognize subsequent editable regions and Design View is blank.
When saving this template, an error appears "This template does not
have any editable regions..." However, Code Validation and Template
Syntax Check return no errors. Moving the body tag out of the
editable region corrects the problem. Here is a sample template:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=utf-8" />
<title>Sample Template</title>
</head>

<body id="foo">

<h1>This is template text</h1>

<p>Text does not show in Design view</p>

</body>
</html>

On Wed, 27 Aug 2008 19:14:34 +0000 (UTC), "Peter Siebert"
<[email protected]> wrote:
>Anyone run into this? It appears to be a bug, possibly
new in DW CS3 (9.0 build
>3481)
> When a <body> tag is put in an editable region, DW
does not recognize
>subsequent editable regions and Design View is blank.
When saving this
>template, an error appears "This template does not have
any editable
>regions..." However, Code Validation and Template Syntax
Check return no
>errors. Moving the body tag out of the editable region
corrects the problem.
>Here is a sample template:
<body> tags are not permitted in editable regions.
If you want to add something to the body tag on individual
pages use:
search help for:
Specify editable tag attributes in a template
~Malcolm~*...
~*

When moving from a list of threads view to a thread would be nice to jump to last thread read.

When moving from a list of threads being viewed to a thread, it would be nice to jump to last thread read or first unread thread.
Sometimes the threads get rather long. Sometimes I haven't read a thread in awhile & I forget where I have left off reading a thread. It would be nice to have an icon to click on to move to your last read post or the first non-read post.
Seems this could be implemented in javascript without too much problem. Might be a problem of when to get rid of the tracking data.
Robert

This would be a new capability. I didn't know you could jump directly to the last post in a thread by clicking on the posters name in your discussions. However, I am interested in jumping to the first post that I haven't read.
Since writing my original post, I realize that software doesn't know what posts I have read. Lets say there are are 26 posts in a thread. Lets assume these are divided into three pages with at most 10 items in a page:
page 1 -- a, b, c, d, e, f, g, h, i, j
page 2 -- k, l, m, n, o, p, q, r, s, t
page 3 -- u, v, w, x, y, z
The software know that I have viewed the first three pages. It doesn't know what post on the pages I have read. The software would need to assume I have read all the available posts on a page.
Now lets assume that 12 more post were added. This results in:
page 1 -- a, b, c, d, e, f, g, h, i, j
page 2 -- k, l, m, n, o, p, q, r, s, t
page 3 -- u, v, w, x, y, z, aa,bb,cc,dd
page 4 -- ee,ff,gg,hh,ii,jj,kk,ll
It would be nice if I could go to aa.
Jumping to the last post in the thread doesn't hack it. You have to spend a lot of time finding where you left off your reading.
Intesting, the list of your posts on your homepage usings the term Last Activity were as Your Discussions uses the term Last Post. The terminalogy should be the same & should act the same. For the existing capability of going the the last post, I was thinking of Goto Last Post.

When moving a page from one pdf to another I see a message "consolidating fonts" and the added page does not view properly

I am working with multiple PDF files in Acrobat Pro XI. Sometimes when I move a page from one PDF to another it does not view properly. It was fine in the source PDF, but not when moved to the desired PDF. I also see a message momentarily across the bottom of my screen that says "consolidating fonts". What must I do to fix this?

Lloyd ,
Follow these steps for Acrobat 11 .
Launch Acrobat>Tools>Print Production>Acrobat Distiller
Now in Acrobat Distiller follow these.
Select Standard in Default settings.
Go to Settings and select Edit Adobe PDF Settings.
Select Fonts and in the font source window select the fonts you want to Add.
Click Save As and then OK.
See if this helps.
Regards
Sukrit Dhingra

Body of Accept/Decline messages from resource room mailboxes blank when viewed with Outlook 2010 or 2013.

I stumbled across a funny little problem yesterday after a rash of users calling wanting to know why rooms were declining their meeting requests..
The rooms were declining for perfectly legitimate reasons.. Conflicts or no end date but the accept/decline reply messages the rooms were sending out had no details in the message body when viewed from Outlook 2010 or 2013.
If message preview is enabled in Outlook 2013 you can read a few lines of the body in the inbox view but it's still blank when you open the message.
Reading pane is also blank.
Opening the message from OWA or my phone shows the complete message body.
Very odd. It reminds me of the bug in Exchange 2013 CU2 where meeting invites to external users were sent blank unless they were sent as iCalendar.
Maybe this will resolve itself when I load SP1 in a few weeks.
Any one else seeing this?
We are running 2013 CU 3

Hi Scott,
I have tested in my Exchange 2013 CU1 environment and I can reproduce your issue in Outlook online mode. Please check whether the problematic users are using Outlook Online mode in Outlook 2010 and Outlook 2013.
The issue doesn’t happen in OWA and Outlook Cached mode. Therefore, I recommend users can change their Outlook client to Cached mode as a workaround. To do it, we can:
Open Outlook, click File > Account Settings > Account Settings. Double-click the account, check Use Cached Exchange Mode > Next and finish it. Restart Outlook to use it in cached mode.
Thanks,
Winnie Liang
TechNet Community Support

Application Bar's "Arrange Documents" goes blank when curser hovers over it

Whenever the cursor hovers over the "Arrange Documents", "Screen Mode", "Launch Bridge", "View Extras", "Hand Tool", "Zoom Tool" and "Rotate View Tool" the icons go blank.
When clicking on them (i.e. "Arrange Documents") only alphanumeric is displayed. When moving the cursor over the blank area where icons should be displayed, only the pop-up tool tips are displayed.
Has anyone encountered a similar problem?
Cheers,
Michael

There is a work-around...
The following is NIK's answer to my question:
"Thank you for your email. This is a known issue that will be resolved with a future update. Until then there is a work around where if you just close and reopen the selective tool, the issue will go away. You can reopen the selective tool by going under the File > Automate option inside of Photoshop."

Cropping when moving and resizing a cropping rectangle

I created a program that crops an image and displays the cropped image but I'm trying to add more functionality
by making it movable and resizable. The rectangle moves and resizes but it only crops an image when user draws the rectangle and not when moved or resized. I know that the X,Y, height and width position of the rectangle would need to be updated but I'm not
sure how I can accomplish this being new to WPF. Below is my user control "CropControl and the code behind. Also, I'm implementing my code using MVVM framework.
XAML:
<UserControl x:Class="Klein_Tools_Profile_Pic_Generator.CropControl"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
xmlns:s="clr-namespace:Klein_Tools_Profile_Pic_Generator"
mc:Ignorable="d"
d:DesignHeight="300" d:DesignWidth="300">
<UserControl.Resources>
<ControlTemplate x:Key="MoveThumbTemplate" TargetType="{x:Type s:MoveThumb}">
<Rectangle Fill="Transparent"/>
</ControlTemplate>

<ControlTemplate x:Key="ResizeDecoratorTemplate" TargetType="{x:Type Control}">
<Grid>
<s:ResizeThumb Width="3" Height="7" Cursor="SizeNS" Margin="0 -4 0 0"
VerticalAlignment="Top"/>
<s:ResizeThumb Width="3" Height="7" Cursor="SizeWE" Margin="-4 0 0 0"
VerticalAlignment="Stretch" HorizontalAlignment="Left"/>
<s:ResizeThumb Width="3" Height="7" Cursor="SizeWE" Margin="0 0 -4 0"
VerticalAlignment="Stretch" HorizontalAlignment="Right"/>
<s:ResizeThumb Width="3" Height="7" Cursor="SizeNS" Margin="0 0 0 -4"
VerticalAlignment="Bottom" HorizontalAlignment="Stretch"/>
<s:ResizeThumb Width="7" Height="7" Cursor="SizeNWSE"
VerticalAlignment="Top" HorizontalAlignment="Left"/>
<s:ResizeThumb Width="7" Height="7" Cursor="SizeNESW"
VerticalAlignment="Top" HorizontalAlignment="Right"/>
<s:ResizeThumb Width="7" Height="7" Cursor="SizeNESW"
VerticalAlignment="Bottom" HorizontalAlignment="Left"/>
<s:ResizeThumb Width="7" Height="7" Cursor="SizeNWSE"
VerticalAlignment="Bottom" HorizontalAlignment="Right"/>
</Grid>
</ControlTemplate>

<ControlTemplate x:Key="DesignerItemTemplate" TargetType="ContentControl">
<Grid DataContext="{Binding RelativeSource={RelativeSource TemplatedParent}}">
<s:MoveThumb Template="{StaticResource MoveThumbTemplate}" Cursor="SizeAll"/>
<Control Template="{StaticResource ResizeDecoratorTemplate}"/>
<ContentPresenter Content="{TemplateBinding ContentControl.Content}"/>
</Grid>
</ControlTemplate>
</UserControl.Resources>
<Canvas x:Name="BackPanel"
MouseLeftButtonDown="LoadedImage_MouseLeftButtonDown"
MouseMove="LoadedImage_MouseMove"
MouseLeftButtonUp="LoadedImage_MouseLeftButtonUp"
Background="Transparent">
<ContentControl x:Name="contControl" Visibility="Collapsed"
Template="{StaticResource DesignerItemTemplate}">
<Rectangle x:Name="selectionRectangle" Fill="#220000FF"
IsHitTestVisible="False"/>
</ContentControl>
</Canvas>
</UserControl>
CODE BEHIND:
namespace Klein_Tools_Profile_Pic_Generator
/// <summary>
/// Interaction logic for CropControl.xaml
/// </summary>
public partial class CropControl : UserControl
private bool isDragging = false;
private Point anchorPoint = new Point();
private bool moveRect;
TranslateTransform trans = null;
Point originalMousePosition;
public CropControl()
InitializeComponent();
//Register the Dependency Property
public static readonly DependencyProperty SelectionProperty =
DependencyProperty.Register("Selection", typeof(Rect), typeof(CropControl), new PropertyMetadata(default(Rect)));
public Rect Selection
get { return (Rect)GetValue(SelectionProperty); }
set { SetValue(SelectionProperty, value); }
// this is used, to react on changes from ViewModel. If you assign a
// new Rect in your ViewModel you will have to redraw your Rect here
private static void OnSelectionChanged(System.Windows.DependencyObject d, System.Windows.DependencyPropertyChangedEventArgs e)
Rect newRect = (Rect)e.NewValue;
Rectangle selectionRectangle = d as Rectangle;
if (selectionRectangle != null)
return;
selectionRectangle.SetValue(Canvas.LeftProperty, newRect.X);
selectionRectangle.SetValue(Canvas.TopProperty, newRect.Y);
selectionRectangle.Width = newRect.Width;
selectionRectangle.Height = newRect.Height;
private void LoadedImage_MouseLeftButtonDown(object sender, MouseButtonEventArgs e)
if (isDragging == false)
anchorPoint.X = e.GetPosition(BackPanel).X;
anchorPoint.Y = e.GetPosition(BackPanel).Y;
Canvas.SetZIndex(selectionRectangle, 999);
isDragging = true;
BackPanel.Cursor = Cursors.Cross;
private void LoadedImage_MouseMove(object sender, MouseEventArgs e)
if (isDragging)
double x = e.GetPosition(BackPanel).X;
double y = e.GetPosition(BackPanel).Y;
contControl.SetValue(Canvas.LeftProperty, Math.Min(x, anchorPoint.X));
contControl.SetValue(Canvas.TopProperty, Math.Min(y, anchorPoint.Y));
contControl.Width = Math.Abs(x - anchorPoint.X);
contControl.Height = Math.Abs(y - anchorPoint.Y);
if (contControl.Visibility != Visibility.Visible)
contControl.Visibility = Visibility.Visible;
private void Image_MouseMove(object sender, MouseEventArgs e)
if (moveRect)
trans = selectionRectangle.RenderTransform as TranslateTransform;
if (trans == null)
selectionRectangle.RenderTransformOrigin = new Point(0, 0);
trans = new TranslateTransform();
selectionRectangle.RenderTransform = trans;
trans.Y = -(originalMousePosition.Y - e.GetPosition(BackPanel).Y);
trans.X = -(originalMousePosition.X - e.GetPosition(BackPanel).X);
e.Handled = false;
private void LoadedImage_MouseLeftButtonUp(object sender, MouseButtonEventArgs e)
if (isDragging)
isDragging = false;
if (contControl.Width > 0)
//Crop.IsEnabled = true;
//Cut.IsEnabled = true;
BackPanel.Cursor = Cursors.Arrow;
contControl.GetValue(Canvas.LeftProperty);
// Set the Selection to the new rect, when the mouse button has been released
Selection = new Rect(
(double)contControl.GetValue(Canvas.LeftProperty),
(double)contControl.GetValue(Canvas.TopProperty),
contControl.Width,
contControl.Height);

Hello HotSawz,
The ResizeThumb and MoveThumb is not in your code so I cannot compile. Anyway, it is not the problem.
Anyway, can you clarify more details about "it only crops an image when user draws the rectangle and not when moved or resized", it is already normal behavoir for you to draw a rectangle and then move it. What kind of action do you want? Do you
mean some controls like this:
http://www.codeproject.com/Articles/23158/A-Photoshop-like-Cropping-Adorner-for-WPF
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Follow up on: Topic : iBook G4 800 MHz freezes when moved or bumped lightly

Last year I posted the following message, which has been fixed. Summary of repair at bottom of post:
Original message posted Aug 4, 2007:
"For the past several months my iBook G4 has been freezing when moved or bumped lightly. It has also occasionally done some strange things at startup. It sometimes will show just a grey screen and sit there. Sometimes the screen will do some sort of fade transition across the screen, going bright in a wave accros the screen and then to black and then nothing. Sometimes there will be vertical lines in the middle of the right side of the screen of various colors. And the last significant occurance is the occassional static in the display. These video symptoms always occur at startup. If the computer starts up to the desktop it will only freeze if moved or bumped lightly. The cursor sometimes can still be moved after the computer freezes.
I have done the following:
Clean install of OS (Tiger 10.4) with all updates and tested before updating. If have done this before and after wiping the drive clean.
I have removed the extra RAM, reseated the RAM, removed the Airport Extreme card, reseated the Airport Extreme card. I have chaged out the hard drive. I have also disassembled most of the computer to check for any other loose components. The only discrepency I have found was a crimped microphone wire, that is slightly damaged. The screen was replaced a few months after purchase when it had a close encounter with a hot wheel car of my son's. The computer is currently a little over three and a half years old.
I work on computers for a living, specialize in Macs, and have been using Macs since 1986. I am stumped. Can someone please shed some light on this issue by providing a different point of view than my own. Sometimes we need an outside perspective to solve some problems.
Thanks in advance for any help you can provide."
Solution provided by Apple:
I took the laptop to the Apple Store and sent it in for the flat rate repair, which was a little over $300. They had to replace the motherboard and some of the cable. The bad motherboard was causing video issues, freezing and startup difficulties. The bad cables were causing the freezing when the unit was moved. The laptop has performed exceptionally well since the repair and is still in use. Hope this helps other people out there.

As a guess it suggests to me that the leads on U28 need to be reflowed.
Mad Dog

I have a mac OSX desktop version 10.6.8 and all of a sudden I can't get a full screen view in Safari when I ask for help the response is use the arrows on the top right of the screen ... I don't have them ... can anyone help?

I have a mac OSX desktop version 10.6.8 and all of a sudden I can't get a full screen view in Safari when I ask for help the response is use the arrows on the top right of the screen ... I don't have them ... can anyone help?

Hi Mary,
I don't remember those arrows in 10.6, only 10.7 & up!?
I have 10.6.8, as you do. To make your Safari full screen, make sure you have the left hand side of your safari page moved all the way to the left. Then move your cursor to the BOTTOM RIGHT CORNER of the safari page, and simply drag your page towards the lower right hand corner of the screen. NOTE: you will see a series of lines on the bottom right corner of the page, indicating where to place you cursor arrow.
By wuzradioman here...
https://discussions.apple.com/thread/4218928?start=0&tstart=0

When moving a file using drag and drop, as I hover over the destination folder it no longer opens, so I can't drop the file into the folder. Why?

When moving a file using drag and drop, as I hover over the destination folder it no longer opens, so I can't drop the file into the folder. Why? I have a heirarchical embedded folder structure under \Documents. Usually, as I drag the file to be moved over the various folders, they will blink twice, then expand/open to reveal contents (in Finder). Now, when the file to be moved is held (hovering) over the destination folder, it will not blink or expand, so there's no place to drop the file. If I release the mouse button, the file image disappears, showing that it is "going back to the place it came from", a.k.a. was not moved. This just started happening. I noticed it after upgrading to Mavericks. Is this a bug or could anything else be causing this?

As of today, Apple Support discovered during a remote support session with me that the same thing happens on their own system. It is isolated to "Column View"; the Icon and List views in Finder behave correctly. Issue is being escalated to engineering, and Apple will call to report status in a couple days. In all likelihood, this is a bug that will need to be addressed in a future update.

Canvas/Viewer Zooming past 100% question?

When I zoom the Canvas or Viewer past 100%, I think I should start to see actual pixels. By the time I get to 800%, I should be able to see the actual pixels, albeit very small. When I do this with Apple Intermediate or Apple ProRes MOV's, at like 800% I see what looks like VERY smoothed pixels. Is my output going to look like that? When I convert my input with a 3rd party codec such as CineformHD at the same resolution (I'm using 1920x1080 with all codecs), and when I zoom in, I start to see the pixel structure as I'm used to in Photoshop. I like it much better when I see the pixel structure.
Is FCP actually smoothing the view with the Apple codecs because it thinks it looks better with a smoother view? (Though when I make a change in the video parameters, for a brief second, you actually see the pixels then it switches back to the smooth view.)
I guess the question is, is that what its doing--smoothing? And the second is, can I make it so that the apparent "smoothing" doesn't happen? Thanks.

Final Cut Pro's Canvas always shows a low-res proxy to conserve resources for real time playback.
To truly assess your video quality, you need a calibrated external monitor.

Canvas/Viewer is blank when moving scrubber along a video

Similar Messages

Maybe you are looking for