Cap 4 quiz published in cap 5 not working

Our site runs quizzes made from cap 4 fine but when I make a change to a cap 4 quiz using cap 5 and republish, the quiz will no longer work. Where do I start looking for a fix?

Hi,
What type of question slides are you using in the project? (Also, what is your first question slide where the player is freezing)
What happens if you directly open the quiz swf instead of opening it from the javascript? Does the player freezes even then?
Thanks,
Vikranth.

Similar Messages

Unibody macbook caps lock stuck on sound not working got wet.

My Macbook got wet due to a flower vase tipping over (cats) I have replaced the keyboard and the backlight, im thinking it needs a logic board. The sound dose not work and the computer comes on when its closed, caps lock stuck on. External keyboard works ok. thanks for your time
Kevin

I've also installed Onyx and performed maintenance and cleaning tasks. No difference...

Caps/Num lock LED indicators not working in gnome

I have a qPad MK-85 mechanical keyboard, and I can't seem to get the LED status indicators for the lock keys to work.
The CAPS and NUM lock function still works, but I don't have any indication whether they'r'e on or not.
It only seems to be under gnome I have this problem, because they're working just fine in grub, windows, and tty2-6.
I have done a search and it seems a lot of other people with mechanical keyboards have the same problem, but no solutions.
So.. anyone here have any solutions?
Edit: tested in xfce, not working there either
Last edited by vstuen (2013-01-04 18:49:16)

No reply means no one can help I suppose.

Apple Keyboard: Tab, Caps Lock, Tilde and Esc not working.

Yesterday I turned on my mac and was filling out some form and discovered whilst trying to go the next field that my tab button wasn't working. My tilde, esc and caps lock buttons won't work either (light comes on when I start up and pull out and plug keyboard back into USB port). It's strange that they're all tucked up in that left hand corner.
Has anyone else come across the problem or have any thoughts about curing the problem?
Cheers,
Mike

If MGW's suggestions do not work, then check out the following as your keyboard may be dirty:
Disassemble a Apple Pro (transparent) keyboard to clean it
http://technology.niagarac.on.ca/people/bgracey/prokeyboardrepair.html
http://www.tuaw.com/2006/11/17/how-to-clean-your-apple-keyboard/
http://www.associatedcontent.com/article/367670/cleaningthe_apple_pro_keyboardremove.html?cat=59

Captivate 7 course published to html5 not working

I recently created an elearning course and published to both SWF and HTML5 for SCORM 1.2. However, in doing so, I could not get it to play on my iphone, and on the Mac only some browsers worked.
I separated the two outputs in two different versions and published them to SCORMCloud with the following results:
Published to SWF - works fine across all browsers.
Published to HTML5 - does not work on any browser, or iphone/ipad. I can't even get the "Preview HTML5 output in web browser" to work.
In all cases, we simply see a blank screen. The HTML5 tracker does not show that there are any incompatibilities. The options under externalized resources are left unchecked. I have included a screen shot of the html5 settings, just in case. They seem pretty cut and dry, but is there something somewhere--here or on another screen--that I am missing?
I am really in a bind at this point since this course was supposed to be up and running a couple days ago. Any help you can offer is appreciated. Thanks in advance.
Best,
Arthur

They're all in the same boat with you. It's not working reliably for them either.
You need to go back to the drawing board and ask yourself (or your client) some hard questions about your target audience and your target course content.
Is is REALLY the kind of content that you want people to view on a tiny smart phone screen? E.g. is it desktop software training? If not, then why bother with trying to support tiny screens?
Are the people in your target audience REALLY likely to be viewing this content ONLY on their phones, or could they just as easily view it in their web browser on their computer? If so, tell them so.
The truth is that most clients have no idea about the technical limitations of this brave new world we call Mobile Learning, and many are now picking up HTML5 as the latest technological buzzword they trot out to show how "with it" they are:
"We need our content to be HTML5-compatible to accommodate the m-learning landscape and maximize shareholder expectations bulldust bulldust bulldust...ad nauseum."
While I agree that HTML5 is probably the future of e-learning, it's causing more than it's fair share of headaches in the present.

Publisher News Portlet Not Working

Hi,
We use Publisher 6.5 with Oracle WCI 10gR3 portal. We have a News Portlet in our home page which has suddenly stopped displaying any content. It has a huge number of news articles, i.e. around 250 Plus articles.
We found a setting in the DET relating to max items which was set to 200, we increased it to 400, and published the whole folder, but things still did not work out.
If we try to preview the portlet while adding to another page, we are able to see the content, but once the portlet gets added, nothing displays once again. Also in Publisher Explorer, the content item attached to the News portlet is not getting displayed if we click Preview. We get an error message "Error - Requested resource is currently unavailable. Request to the remote server has timed out. Try again later or contact your portal administrator.
Gateway was not able to access requested content. If the error persists, contact your portal administrator. "
Please can anyone help as this is an urgent issue

First you should contact Oracle Support and get this set as a priority one issue and escalate it so that you get the fastest possible response.
It sounds to me like you've blown away your index.
I'd check the following:
1)
go into your publisher directory <portal home>/ptcs/publishedcontent/publish/<path to your content>
Verify that the content is actually still there (actual html files of each of your news articles).
2)
go into publisher explorer and check your articles folder (in the appropriate area) and verify that your content is still there.
3)
Within the problematic folder, open the Content Item Index - this will contain all of the items that you've posted to your announcement portlet.
If someone checked-out this file and then did an "undo-checkout" I believe it blows away all changes since the last "check-in" which typically is nothing, and blows away all your content - which would cause precisely the problem you are seeing.

ESC Caps Lock and Tab keys not working

I have keys that are not responding on the key board while others are working just fine.

Please reset the SMC, this may take up to 3 attempts to "take." If you still have trouble then try a USB keyboard and see if that works, if it does that points the finger at the keyboard which will need to be replaced.
To do a SMC reset, simply power off the computer, remove the power cord from both the wall and computer, wait 15-20 seconds and reboot.

IWeb 08 Published Photo Links Not Working

Hello,
I've recently switched over to iWeb 08 and really dig all the new functions. I am running into one spot of trouble and hope that someone might shed some light on it for me.
I've got a few images that I use as hyperlinks rather than text. The hyperlinks are fully functional while in iWeb and everything is fine in the inspector window, yet when I publish the site, the links are no longer operational.
Anyone have a quick fix for this one? As the images are thumbnails which point towards the full-size image, using text is not an option in this case.
Thanks in advance!
~Lola

I publish to my desktop, then use Fetch to upload the files to my host at netrfirms.
www.lolabydesign.com
The non-functioning thumbnail links are at:
http://www.lolabydesign.com/LolaByDesign/Bead_Gallery.html
I just noticed that some of the text links are inoperable as well, altho they check out fine in iWeb itself - seems kind of random.
The text links that no longer work are at:
http://www.lolabydesign.com/LolaByDesign/Shop_Instructions.html
Thanks for your assistance!
~Lola

CP5.5 quiz in Flash GUI not working...

Greetings,
I have a project that includes a number of CP SWFs in a Flash GUI...but the quizzes don't work...or should I say, don't completely work...
For instance, score tracking, results page, review, work just fine...but questions with dropdown menus, the dropdowns don't work so the question can't be answered...the e-mail for test results doesn't work...and for the record, I did publish as EXE and everything...and I mean everything worked perfectly...so the file is setup properly...
Does anyone know if there is a trick to "loading" a CP SWF into a Flash-based GUI (or more actually into another SWF) that would enable ALL of the Captivate functionality?
Please...anyone...THANKS

Jim, I swung the hammer and hit my thumb OUCH!!!
It seems the link you provided is AS2...it also mentioned that the component was not compatible with CP5 but the author claims to have an AS3 version (as of September 01, 2011) but hasn't published yet...the AS3 version seems as if it will solve my problem...but where the heck is it
Thanks Jim! You ROCK!

Publish for Approval - not working with 10.5.4 & Aperture 2.1?

Trying to use Publish for Approval, have turned on Web Sharing and selected images in AP2.1. Have a wired ethernet connection to my wireless router. But only get "Finder got an error: The operation could not be completed. (-8068)".
Anyone having any luck with this or know where I can reach the developer?

Now it's giving me other troubles. Got as far as 104 of 1323 images and hit AppleScript Error: Timeout. On subsequent attempts, it's hit AppleScript Error: Can't make <class docf> "[filename]" of alias "[boodrive]:Library:Documents:[gallery name]:images:" into type alias. (-1700).
Bummer.

Publisher to PDF not working properly

I’ve created a multi-page document in Microsoft Publisher using imported .jpg’s and .png’s (.png files are text with no backround created in photoshop…most of the text has shadowing behind it to make it visible when it’s overlayed on the backround images
I’ve put down). When this project is saved as PDF the quality of the .png are severly compromised (look jagged) and the shading/text effects do not reflect what they should. I also have publisher-added shapes behind text in a washed-out white that appears
checkered on the pdf. Please help!!

Hi,
Maybe the file was not saved by using optimized output options, please refer to this kb below, Use the Save as PDF Option within Publisher:
http://support.microsoft.com/kb/2661393/en-us
The kb is for Publisher 2010, it can also provide you with some hints if you are using another version.
Regards,
Melon Chen
TechNet Community Support

IActivityResponse.Publish Method (IDictionary) Not Working

http://msdn.microsoft.com/en-us/library/hh457138.aspx
I cannot get this example to return results to my runbook. I get the output fields but no output. If I alter the line:
response.PublishRange(publishedData);
to
response.PublishRange("ID",publishedData);
I get output in the ID field as I would expect. I also noticed I have to search for that article. If I browse through the SDK it looks like that has been removed. Was this depreciated? How can I get this to work?
Thanks

Since I could not get the result set to retun back as a whole set like they have, I ended up having to specity my outputs in my responces. Orchestrator was intellegent enough to correlate each list as a column in the item as a whole. When it calls out to
my next runbook object, it sends the columns grouped properly for each item and fires off the object once for each item in the compiled list as I desired.
     public void Design(IActivityDesigner designer)
            //Add runbook Input/Outputs
            designer.AddInput("Incident Type").WithListBrowser(new object[] { "New Items Only", "Updated Items Only", "Both" });
            designer.AddInput("Interval");
            designer.AddOutput("Reference Num");
            designer.AddOutput("Description");
            designer.AddOutput("Group ID");
            designer.AddOutput("Open Date");
            designer.AddOutput("Handle");
            designer.AddOutput("Item Type");
        public void Execute(IActivityRequest request, IActivityResponse response)
            //Get servicedeskinfo and send it to runbook outputs
            string reqInput = request.Inputs["Incident Type"].AsString();
            double interval = request.Inputs["Interval"].AsDouble();
            string[,] gathered = GetServiceDeskInfo(reqInput, interval);
            //Parse through all results
            for (int i = 0; i < gathered.GetLength(0); i++)
                //Add each result to it's respective list
                List<object> refNums = new List<object>();
                List<object> groupIDs = new List<object>();
                List<object> descs = new List<object>();
                List<object> openDates = new List<object>();
                List<object> handles = new List<object>();
                List<object> itemType = new List<object>();
                if (gathered != null)
                    refNums.Add(gathered[i, 1]);
                    groupIDs.Add(gathered[i, 0]);
                    descs.Add(gathered[i, 2]);
                    openDates.Add(gathered[i, 3]);
                    handles.Add(gathered[i, 4]);
                    itemType.Add(gathered[i, 5]);
                //Pass lists back to Runbook
                response.PublishRange("Reference Num", refNums);
                response.PublishRange("Group ID", groupIDs);
                response.PublishRange("Description", descs);
                response.PublishRange("Open Date", openDates);
                response.PublishRange("Handle", handles);
                response.PublishRange("Item Type", itemType);
I am all set. Thanks for your response.

Publish on IWeb not working

Hi,
I tried to edit my website last night. I deleted and added some pictures then clicked on publish. Now it's been over 12 hours. The publish is grayed out. The folder is still red and when I tried to close IWeb it says it's in the process of publishing. I've checked my website and none of my changes are there. How do i fix this? What is the issue?
HELP!!

Try the following:
1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iWeb's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iWeb folder (Snow Leopard and Earlier).
3 - launch iWeb and try again.
NOTE: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
If that doesn't help continue with:
move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
launch iWeb, create a new test site, save the new domain file and close iWeb.
go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
move your original domain file from the Desktop to the iWeb folder.
launch iWeb and try again.

Publish for review not working

I am trying to use the publish for review feature in Captivate cs 4. When I select this option the program takes some time and then displays this screen:
But as you can see never displays the view output option- nor does it ever open my mail client as the help file says it should. I don't have a progress bar or any other action- it just seems to stop here.
eventually it does put a .crev file in the same directory of the project ( If I leave this dialog box open forever). But when I try to open this file I get this error:
Help Please. I am new and so I'm hoping this is something simple I am not doing right.

Hi again
Sorry my suggestion failed to directly address the issue. But I'm pleased you were able to resolve it!
Ever so nice of you to post the workaroud too. That way others may benefit.
Sending good Karma thoughts your way!
Personally, I try to do ALL my banking at FUBOK. (First Universal Bank Of Karma)
Cheers... Rick
Click here for Adobe Certified Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

"Publish Site Changes" not working - publishes entire site every time

Hi,
the last few times I've tried to update my site, the Publish Site Changes function no longer seems to work - instead the whole site is created and published each time - taking a couple of hours. Has anyone else had this problem? The changes are pretty innocuous, but this has happened three or four times in a row now. Any ideas on how t fix it?
Thanks a lot.

Are you using iWeb's built in ftp client to upload to your server? Other users have found that using Cyberduck or another 3rd party ftp client that can upload only changed files will work where iWeb fails. You'll have to publish your site to a folder on the hard drive and upload all of the files the first time. From then on, as long as you don't delete the contents of that folder, you can upload only the new or edited files.
Web Site Maestro will do the same and optimize your files for faster downloading as well.
OT

Cap 4 quiz published in cap 5 not working

Similar Messages

Maybe you are looking for