Cap. 5.0: returning to an earlier slide loses the control bar
My 10-slide course uses the control bar at the bottom. The last slide has a button that returns the user to slide #1. When one uses the button to return to slide #1, the control bar has disappeared from all of the slides. I'm baffled.
Check your project for any Advanced Actions that might be setting the variable for cpCmndShowPlaybar to 0.
These actions might be attached to that final button, or On Slide Enter somewhere.
What happens if you use the TOC to navigate back to the first slide instead of clicking the button? Does the playbar still disappear?
What happens if you remove the current Playbar, and set to a different playbar? Does it still disappear?
Similar Messages
-
I don't know how it happened why, but the icon for rotation lock is missing from the control bar. Second problem, the passcode for my iPad isn't working. I wrote it down, so not sure what the problem is. HELP
If the setting for the rotation lock is missing it is because you are using the side switch to control the rotation in Settings>General>Use Side Switch to>Lock Rotation. The software switch in the control center should be for Muting system sounds.
you have to restore the iPad in orde to unlock it now.
iOS: Forgotten passcode or device disabled after entering wrong ...
If you are sure that you are entering the correct passcode, reboot the iPad and then try again and see if it is accepted.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
The question pretty much sums up what I want to ask. Thank you very much for any and all help.
I know this is not the place to rant but I think this needs to be said - Why do you(firefox devs) guys keep on changing things that were perfectly fine in the first place? For example, making the find bar slide in and out of view may "look cool" but it consumes more system resources(albeit very very little) than making it appear instantaneously(the way it was previously).This is done via CSS transitions: chrome://global/skin/findBar.css
*https://developer.mozilla.org/en-US/docs/Web/Guide/CSS/Using_CSS_transitions
Add code to the userChrome.css file below the default @namespace line.
*http://kb.mozillazine.org/userChrome.css
The customization files userChrome.css (interface) and userContent.css (websites) are located in the chrome folder in the Firefox profile folder.
*http://kb.mozillazine.org/Editing_configuration
<pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
findbar { transition-property: none !important; }
</nowiki></pre> -
7.1.3
Is there a way to get rid of the control bar which pops up anytime you move the mouse during the slide show? I am putting together an audio visual presentation with two laptops and a bunch of other stuff.
(video/audio mixer, stage lighting etc.) With a split screen I can run iPhoto/iMovie from either laptop on the "big" screen while controlling the sound from the laptop through the small screen....
Problem is, while the audience is watching the big screen, and I touch the mouse, the control bar shows up at the bottom of their screen......no good....
Thanks.You're rather far beyond the intended uses of iPhoto there my friend. No there's no way to stop that menu appearing. You might be best to consider using a different application or export the slideshow as a Quicktime Movie. Alternative apps which might help are PhotoToMovie or PhotoPresenter, both of which integrate with iPhoto.
Regards
TD -
How can I uninstall 11.4 and return to an earlier version?
iTunes 11.4 (OS 10.6.8) is highly dysfunctional on my system. Highly unresponsive, Activity Monitor shows it's not responding, have to force quit many times, lots of SPODs, etc. etc. etc.
How do I back out of this version and return to an earlier one?I don't understand your reply. You are just restating my problem.
-
Three keys of my keyboard are not working, the cap one, the return key and the space bar, while the virtual keyboard shows to others keys highlighted in orange (^ and `); How to fix it? I writing now with a bluetooth keyboard.
All new keyboards need Snow Leopard 10.6.8 and above for full functionality.
Rather short-sighted of Apple perhaps, but that seems to be a trend these days.
I'm afraid the only fix is to upgrade to SL. Personaly, I'd take it back and get a refund and seek an older keyboard or a third-party one elsewhere. -
Revision: 11655
Author: [email protected]
Date: 2009-11-11 08:27:42 -0800 (Wed, 11 Nov 2009)
Log Message:
Added logic to allow getStyle to return locally set style values early on (before the instance has been added to DOM).
QE notes: None
Doc notes: None
Bugs: SDK-22198
Reviewer: Glenn
Tests run: Checkin
Is noteworthy for integration: No
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-22198
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/core/UIComponent.asPlease can u answer it fast
-
Cannot clear answers in quiz after returning from jump to slide.
Hi, I apologize if this has been answered previously. I couldn't find a thread containing the information.
I recently upgraded from Captivate 6 to 8 (yes, I know...) and when I created the quiz for this project, I have the learners who answer the questions incorrectly going through remediation using the jump to slide on last attempt. The jump to works fine and returning to the quiz works fine. However, when the learner returns to the quiz, the previous incorrect answers are still displayed and the clear button is non-functional. This doesn't allow them to revise their answer and move forward.
I compared it to a similar project that I created in Captivate 6, and it seems that all the options in the quiz preferences and the question's quiz properties are the same, yet it is working properly in the Captivate 6 project (even when previewed in Captivate 8).
Am I overlooking something simple here?
Thanks!Indeed, the On Exit event is not to be trusted at all, you need an
interactive object, that gets a double functionality. In the video it has
Continue or Return to Quiz, but you can also use 'Go to Next Slide' instead
of Continue. Sorry that I didn't point immediately to that video. It is
short but pretty clear.
2014-12-18 20:45 GMT+01:00 christellek <[email protected]>:
Cannot clear answers in quiz after returning from jump to slide.
created by christellek <https://forums.adobe.com/people/christellek> in *Adobe
Captivate* - View the full discussion
<https://forums.adobe.com/message/7027618#7027618> -
Pls advise how I can return to a previous version of FIREFOX so that my AVC security and SKYPE sites can be re-activated. Tx.
In some cases, the incompatibility is due to the new HTML5 parser in Firefox 4. You could disable that and test whether the bank site works again.
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''html5''' and pause while the list is filtered
(3) Double-click '''html5.parser.enable''' to toggle it to false (it should turn bold).
Then reload the bank page and see whether it works.
And if you need it, here's the process to roll back:
First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, download and save Firefox 3.6 to your desktop for future installation. http://www.mozilla.com/firefox/all-older
Close Firefox 4.
You could install Firefox 3.6 over it (many have reported success) or you could uninstall Firefox first. If you uninstall, do not remove your personal data and settings, just the program.
Unless you have installed an incompatible add-on, Firefox 3.6 should pick up where you left off. If there are serious issues, please post back with details.
Note: I haven't actually tried this myself! -
Whenever I open a Smart Object PSD file to adjust previous settings in RAW, I have noticed that the Amount slider in the Detail panel has reset to 0. Does this reduce the files sharpening? Is this a normal behavior? Can this be prevented?
I use a Mac running 10.6.8 and Photoshop CS6, version 13.0.5 x 64.This behavior happens only on Mac desktop computer, not on my Mac laptop running the same CS6.
After I've edited an ACR file (including sharpening in the Detail panel), I change the file into a PSD Smart Object to complete my edit by clicking on "Open Object". I immediately notice this PSD file is not sharp. If I click on the bottom right of the image icon to return to the RAW file, I find the Amount slider in the Detail Panel has changed from the sharpening amount I gave it, to 0.
If I do the exact same thing on my laptop (running a duplicate of the same Photoshop CS6), this behaviour does not happen. The image remains sharp as a PSD file, and if I check by returning to ACR, the Amount slider has maintained its setting.
Anything more you need? -
Please can you help....
I ordered an iPhone 5s in early September from the orange shop in Chamonix Mont-Blanc France.
I needed a new phone as i dropped my iPhone and broke it so it thought i would upgrade.
I was asked in the shop if I wanted a black or white one, I asked for a Black one, as all my iPhones have all been Black as I DON'T LIKE White ones. (sorry)
I was told my phone would arrive in a week so I waited with broken phone for new one. The following week I was told it would be the following week, the following week i was told the same but the assistant in the shop told me they would ring me when it arrived. Three days later i recieved a text from the shop to say the phone would be in tomorrow, when I went in they said it had not arrived and they would call me when it was in the shop.
They called me on Thursday the 17th of October to say the phone was in the shop.
I arrived at the shop at 6:00pm after my work, the shop closes at 7:00pm. I recieved the phone, signed for it and extra unwanted insurance with I was told I could only canceled in a month. I was then told they didn't have any sim cards in the shop, i said no problem the Phone i assume will need charging so i will take it home and charge it and return for the sim tomorrow.
So the Phone remained boxed.
When I returned home and opened the box I realised it was a white one, I replaced the lid put it back in the bag, and returned it to the shop first thing Friday 18th October, to point out the error, only to be told "to bad" ?? I was told I could have changed it the night before but not this morning? They said I had ordered a Black one but as I had signed for a White one nothing can be done. I was angry and left the shop. I returned later the same day with a French friend to try and resolve this problem, as I wasn't sure if something was being lost in translation. I didn't think I was being unreasonable, it is a very expensive piece of equipment and this wasn't what i wanted. They told my friend that the phone was not available in Black, that was the 5, and that the 5s was only available in silver and gold, and that mine was a silver one.
I then thought it was my mistake as it was a new phone. She put a sim in the phone put it in the box and I left for a business meeting only to arrive and see a Black iPhone 5s sitting on the table??
So I then returned back to the shop with the Black one and mine still all boxed and untouched to prove they had blatantly lied to me an hour ago, only to be told that there was nothing they were prepared to do.
Is this fair practice ? I am at a loss with this and am looking for help ?Welcome to the Support Communities. This Apple doc may be of interest:
Channel Member Code of Conduct
Kings74 wrote:
They told my friend that the phone was not available in Black, that was the 5, and that the 5s was only available in silver and gold..
A minor point, but it may avoid a little confusion if, instead of saying "black" in reference to the iPhone 5s, say "space gray":
"iPhone 5s — Available in silver, gold, and space gray" (Source) -
Hi all, this is my first post, i have been looking at these forums for ages, in anticipation of getting my N95.
I just got it this morning, but i think there might be a problem.
All down the right hand side of the phone, there seems to be loads of movement, the whole thing flexes up and down.
When the slide is up, its all down the right hand side of the phone, up until the part when the screen sticks out from the top of the phone.
Does anyone else have this problem, or is my phone not put together properly?Hello guys
just had to post this exact message on loads of forums i have been moaning on, lol
i have been posting all over different forums and the main Nokia site!
i just recieved my 3rd Nokia N95 from 02 Online Network and its 100% awesome !
the delivery driver turnt up a day early! result !
NO awful wobbling slider on the right hand side like the last 2 handsets, and NO high pitch whining noise!! i cant believe it!
to all of you that have these problems, be patient and just keep sending your phones back to your Networks until you recieve a decent one!
if it takes 10 attempts, it will be worth it!
dont give up!!
you will all get it sorted !
and if T-Mobile or ANY network say NO to a change of more than 2-3 handsets, that is WRONG !!
check with someone high up!
YOU ARE THE CUSTOMER !!
Cheers
MR HAPPY AT LAST !!! -
I recently returned from leading our annual week-long photo workshop in Umbria (www.GVRphoto.com), and happily found myself using my G12 as my primary shooting and teaching tool. I loved its compactness during long walks through Umbrian hill towns, and the fact that I could work so well with it in manual mode. BUT I also loved its articulated viewing screen for making Hail Mary and low-level shots with precision and ease.
This is something I definitely could NOT do with the new G16 since Canon has foolishly decided to eliminate this feature on this camera (and earlier on the G15) as a way, apparently, to make the camera slightly smaller and lighter, as well as to lower the cost.
As a professional photographer and photgraphy columnist, who in the past raved about the groundbreaking G9, I find this to be false economy and a simply boneheaded move that needlessly eliminates a key feature on a potentially great P&S camera. Here's my take on it: www.TalkingPhotography.com
When, if ever, will Canon come to its senses and restore the articulated viewing screen?
--Frank Van Riper
photography columnist
Washington, DCFrank,
I certainly agree with you about the G12. I love mine and have no interest in updating it with any of the new offerings in the G series either. The articulating screen was what sold me on it when I was deciding whether to get the G12 or Nikon's P7100 with longer focal length, bit with only a tilting screen. I don't use the viewfinder much, but when I need it, I really appreciate having it. I agree that larger sensors aren't always needed, unless you do a lot in low light. But the Photoshop Elements software really pulls a lot of detail from the G12 images (I shoot in RAW). I am always amazed at the capability of this camera, and hope that Canon will return to what made the G series so special. Like you, I love the layout of the G12 and the available buttons and dials make this an easy and quick camera to use and enjoy. Shooting in manual is a breeze with all the controls so readily available, yet the newer G16 seems to have moved some of the items back into menus.
I've even been on the lookout for lighty used G12's to get as a backup to mine if and when this one dies on me. The new models seemed really nice at first glance, but actually using them reveals a lack of the same control and feel I'm become accustomed to with the G12. Plus, I am not really happy with the overall image quality of the new G1X II and G7X and the lack of the articulating screen is mind boggling to put it mildly! I'm afraid that too many people subscribe to "smaller is better because I want to carry it in my pocket" theory, so somethings got to give to keep them happy. Hence, my summation that the G7X will replace the G and S series in the future. Too bad, since the G12 is one of the greatest cameras out there in my opinion!
Steve M. -
My/keyboard/green/light/goes/on/and/off./The/space/bar/and/caps/lock/keys/do/not /work/.I/have/100%/battery/life.I/show/connected/to/bluetooth.Anyone/know/the/ap proximate/life/of/a/keyboard?Mine/is/about/4/years/old.Using/an/iMac/about/4/yea rs/old,too.
Could be an early retirement problem. There is no fixed lifespan for anything, as you know. Find a friend with a keyboard and test that in your machine. That will show if it is your keyboard or your computer. We can progress from there.
-
Hello All,
I have a 15" i7 Macbook Pro from early 2011. The past few weeks, it has been getting increasingly difficult to get on my computer. It takes the mac laptop two or three tries to boot successfully. It would turn on, show gray screen, shut down, turn on again, show gray screen, shutdown, and then turn on, show gray screen, before it can finally get to the dark gray log-in screen. Even when I finally get logged in to start working, thinking it would be okay now, it shuts down randomly.
I've ruled out the possibility of a software problem because I've just done a clean re-install of Mac OS X Mavericks on my computer just yesterday.
I did upgrade the RAM recently, about a month and a half ago, from 4GB to 16GB, I went to the apple store four days after that upgrade to have them do a hardware test, and clean the inside of my laptop, which helped with previous heat issues. When they did the hardware test, the hardware was all registered as fine from their system.
I've tried resetting the SMC, PRAM, and doing the internet recovery hardware test, but to no avail. I thought I could at least find out what parts needed to be replaced from the hardware test but it seems that when the hardware test is almost finished, the computer just shuts down, So I am unable to see the results.
My computer is also having battery issues, under battery condition, it says "replace now," parts have been ordered, waiting for arrival. But if the battery health is low, it should still boot up fine, it would just hold a significantly less charge.
Could this be a hard drive issue?
Has anyone had similar symptoms and how was it resolved?
Does anyone know what I can do to alleviate this issue?
I haven't had time to take it to Apple because I'm currently taking a 21 credit semester academically. I'm an art and design student so my computer is basically the bane of my existence. Help! Any constructive advice is welcomed!
Thank you so much for your input!
-Christina C.Problem description:
The Hard Disk is failing.
EtreCheck version: 2.0.11 (98)
Report generated November 4, 2014 at 7:59:28 AM EST
Hardware Information: ℹ️
MacBook Pro (15-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,2
1 2.2 GHz Intel Core i7 CPU: 4-core
16 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1600 MHz ok
BANK 1/DIMM0
8 GB DDR3 1600 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
Color LCD 1440 x 900
AMD Radeon HD 6750M - VRAM: 1024 MB
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 0:3:43
Disk Information: ℹ️
TOSHIBA MK7559GSXF disk0 : (750.16 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
HDV4 (disk0s2) / [Startup]: 749.30 GB (712.10 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R UJ-898
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Application Support/Avast/components/fileshield/unsigned
[loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.9) Support
/Library/Application Support/Avast/components/proxy/unsigned
[loaded] com.avast.PacketForwarder (1.4 - SDK 10.9) Support
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.avast.userinit.plist Support
Launch Daemons: ℹ️
[invalid?] com.adobe.SwitchBoard.plist Support
[loaded] com.avast.init.plist Support
[loaded] com.avast.uninstall.plist Support
[loaded] com.avast.update.plist Support
[invalid?] com.perion.searchprotectd.plist Support
User Launch Agents: ℹ️
[invalid?] com.avast.home.userinit.plist Support
[loaded] com.google.keystone.agent.plist Support
[invalid?] com.jdibackup.ZipCloud.autostart.plist Support
User Login Items: ℹ️
None
Internet Plug-ins: ℹ️
AdobePDFViewer: Version: 10.1.1 Support
QuickTime Plugin: Version: 7.7.3
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Default Browser: Version: 537 - SDK 10.9
User Internet Plug-ins: ℹ️
TroviNPAPIPlugin: Version: 1.0 - SDK 10.9 Support
Google Earth Web Plug-in: Version: Unknown
Safari Extensions: ℹ️
Avast Online Security
Trovi Search for Safari
3rd Party Preference Panes: ℹ️
None
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
16% mds
7% WindowServer
1% loginwindow
1% fontd
1% com.avast.daemon
Top Processes by Memory: ℹ️
120 MB com.avast.daemon
86 MB Google Chrome
52 MB Finder
52 MB WindowServer
41 MB Google Chrome Helper
Virtual Memory Information: ℹ️
13.45 GB Free RAM
1.34 GB Active RAM
944 MB Inactive RAM
1.43 GB Wired RAM
1.11 GB Page-ins
0 B Page-outs
Maybe you are looking for
-
GuiXT for projects - to call application within transaction
Hi I'm using GuiXT for screen modifications and field layouts. I'm using Project Builder CJ20n. Everytime when i want to give a settlement rule to the WBS element within project i need to select the WBS element, g oto Edit --> Cost --> Settlement Rul
-
I have just purchased a new macbook pro running lion and indesign will not load just keeps crashing. Have restarted macbook but I don't know what else to do?
-
I would like to set a background image in a cell and have it not repeat. How do I do that?
-
HT4796 Change the transfer process while migrating?
I started to use the migration assistant from windows to mac, via wireless, now with 360 hours left, I want to know if I can connect a CAT cable to speed up the process
-
Use values of field members from different movies
Hi all, i'm using a different movie in each exercise i'm creating, e.g. exer1.dir, exer2.dir etc etc. I'm putting the same global variable for the students grade in each movie to a field member e.g. field member -> score1 for movie exer1.dir , field