Cap 5: Can I speed up a text animation?

Hi Folks
I had a project that was looking really schmick and was just about ready to publish.
Then I resized it. All of the neat "typing text" started to play in the wrong part of the screen. Aparently this is what happens in Cap 5 and I have to suck it up.
So as work around I have replaced it with a text animations (which look erm ok).
The problem is this, I had squeezed my "typing text" down to 2 seconds for nice fast flowing presentation.
The text animation take 14 seconds to play the same bit of text.
Any thoughts?
Does anyone have a better work around for resizing projects. upgrade to Cap 6 is a no no.
Thanks
M

I think your current installation DEFINITELY has some issues.
If this is for the typing text animation object then THIS is what you should be seeing:
I suggest that the first thing you try is to regenerate your Preferences folder. Search this forum for other threads about how to do that. This might be the cause of some other issues you have too.

Similar Messages

Using Adobe Captivate 6, how can I replicate the PPt text animations wherein I can float in timed?

Using Adobe Captivate version 6.0, I want to be able to do what I always could in PowerPoint - in a bulleted list, cause each bullet to float (or other animation) into place, establish a timing for each line.

To do this in Captivate, you need each bullet to be a separate text caption. You can then apply fly-in effects and time them to coincide with the voiceover. There's no way to make the bullets fly separately in if they are all in the same text caption.

Pre 9 - Text Animation

In Timeline, sometimes the "apply" button is available when I want to apply text animation and other times it is not. How can I determine when a text animation option is available and when it is not. Sometime the "apply" button is available and some times it is not. Not sure when I can "apply" text animation to selected text.
Thanks

Ah, I see. It only works on one line of text. If I created two separate titles and group them together. Would the titler work on the group?
Thanks

I was in a Pages Doc and inadvertently had the Caps Lock on. How Can I change all the text I typed from Upper Case to Lower Case?

I was in a Pages Doc and inadvertently had the Caps Lock on. How Can I change all the text I typed from Upper Case to Lower Case?

Several protocols may be used.
Here I describe two of them.
(1) the one which I use : install and use the "Convert to Lowercase" service available in the free WordService
(2) copy your text, paste in TextEdit and enter the Edit menu.
I guess that you will recognize the items in your English menu.
I apologize but I don't know the English items.
Yvan KOENIG (VALLAURIS, France) jeudi 16 février 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.3
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k

After installing Cap 5 patch 5.0.2.630 can not insert a text animation

I installed the 5.0 patch yesterday and today I cannot insert a text animation in my project. I have tried both Insert > Text Animation and Shift+Ctrl+X and nothing happens in either case. I seem to be able to insert everything else (at least the appropriate dialog boxes display). I was apprehensive about an upgrade during a project but did it because I hoped it would resolve some of the audio issues I am seeing.
I do have a couple of text animations that were working fine since I started the project several months ago, now they work but in a halting sort of way. I thought maybe they had become corrupted and was going to delete and re-insert them but Captivate won't let me now that I have patched it.
I have seen a number of people indicate that they gave up on text animations because they are pretty unpredictable for the end user of the published project - anyone feel otherwise?

Following up regarding my bug report, in case this info is useful to others..
Adobe contacted me via phone and, after we spent a considerable amount of time troubleshooting, the rep determined that my project was corrupted. Since the problems began after the patch was applied, it seemed reasonable to think that it somehow precipitated the issues, but the rep did not feel that was an accurate conclusion. I was concerned that I had now lost a lot of work because, even when I opened older backed up versions of the project, I encountered the same issues. The rep explained that there would not be a lot of rework because I could, in small batches, copy slides from the corrupted project to a new project (except for the Quiz review slide, which I needed to allow Captivate to create automatically in the new project). I was glad to hear this but unfortunately discovered (and the rep did not seem to expect) that not all of the project features copied. Most significantly, Master pages, Advanced Actions, and object names did not copy over. Those all had to be recreated and reconfigured on the appropriate slides. So there was quite a lot of rework after all.
Once the substantial rework was completed, I was still having numerous problems working in and running the published project (65 slides total, 3 FLVs). After digging through the forums some more, I decided to break up the project and try the Aggregator, which was a failure. The project would not run. Then I turned to the post about daisy-chaining (#3445696) and I have been able to get things working. I definitely wished I had tried the multi-project route much sooner, but hadn't seen any indication that 65 slides with 3 FLVs was too big of a project.
Regarding the daisy-chaining: I was unable to get the projects to work by following the instructions to (1) use separate published project folders (2) use relative links to call the next project (3) ensure the folder was a trusted location in my Flash settings. Following these guidelines, the project did work when running on my C drive, but when I copied it to our network, it always threw up an error that it couldn't find the daisy-chained projects. I got it to work by scrapping the use of daisy chaining through the Publish End setting, putting all files in one folder, using a button on the last slide of each project to call the next project, and for the button action, using only the file name (not the relative path) of the project to launch.
I hope some of this info can help someone else avoid frustration.

How can I speed up the extract() function queries on XML

Hi,
Please I need some light on xml and indexes.
This is my case:
I use Oracle 9i R2.
I have a table with some rows containing some few xml documents (each row contains a big xml document).
Given a value for an attribute of a tag, I want to extract the entire section within the tags.
Example:
<MYTAG number="1">
.....big stuff here
</MYTAG>
<MYTAG number="2">
.....big stuff here
</MYTAG>
<MYTAG number="x">
.....big stuff here
</MYTAG>
So for number=2 I would like to extract from the document the xmltype
<MYTAG number="2">
.....big stuff here
</MYTAG>
I created an index and have followed all the steps from the XML Database Developers Kit manual. Then I would use extrac() as the document says.
Now some doubts arised:
Are these text/xml indexes only useful for getting the rowid of my document?
I mean, if I select 'x' from the table looking for some value, then the index is used. But when I use extract in the select to get the section I look for, the query gets really low, specially when xml documents are big. I think when I have only row with one document, getting the rowid is not the problem, but the extraction from the document is.
Is the extraction process faster because of the index?
For what I see, the index only helps me to find the rowid, but then Oracle has to deal with the very big document inside the row. At that point Its oracle against a big text processing and index has nothing to do.
How can I speed up the extraction of the section?
If there any other index or tool for help extraction to be faster?
I would appreciate to know what can I do. I need help on this.
Thanks in advance!

Well,
- What indexes, if any, already exist?
- What do the functions rl and nice do?
- What are the current query plans?
- How restrictive are the various predicates?
- What version of Oracle?
Justin

Q10 speed-dial and texting issues

Hi there,
I am setting up a q10 for my wife, and i also have one.
I cannot do speed dial on my q10. I have two brand new identical devices and one can do speed dials, and one cant.. I can set up the speed dials, but it doesnt activate when i do a longpress.
Also when i longpress a number in my call log it doesnt give me the option of sending a text, whereas my other devices does.
Also when i play a song it deosnt give me the choice to add that song as a ringtone whereas it gives me that choice and other choices on my other device.
My questions are:
Is there a way i can restore some defaults to have these features, or change options so i can have these same features that i have on my idetical device.
or is the second devices faulty> Seems odd that it would be as its brand new.

Hi Husam,
Thank you for your questio. However this community is for Cisco Small Business Products and the PLW400 is a Linksys product. Here is the area that may help you further with your question. http://support.linksys.com/en-us/support/powerline/PLW400
Regards,
Cindy Toy
Cisco Small Business Community Manager
for Cisco Small Business Products
www.cisco.com/go/smallbizsupport
twitter: CiscoSBsupport

HT1338 HOW CAN I SPEED UP MY MAC IT HAS A GRINDING SOUND AND THE COLOUR WHEEL SPIN AND FREEZES

MY IMAC HAS A GRINDING SOUND AND ITS SLOW, THE WHEEL START SPIINING AND IT FREEZES I HAVE TO TURN IT OFF AND ON AGAIN , WHAT IS THE PROBLEM AND HOW CAN I SPEED IT UP AND GET IT TO RUN FASTER?

Does the sound appear to be from the hard drive, such as when you do any work (which means the hard drive is being written to)?
Have you received an email from Apple about their Seagate hard drive recall (for certain iMac models)? Check to see if yours is affected here:
http://www.apple.com/support/imac-harddrive/
In any case, a grinding noise is what I had, followed by other very strange behavior and the diagnosis was hard drive failure. So, whether you are covered or not, I would strongly suggest that you backup all your data as quickly as you can and - if you're not covered by warranty or the recall - book an appointment at your nearest Genius Bar for a diagnosis.
Also, please do not use all caps - difficult to read and it's considering shouting on the internet.

HT5953 How can I speed up the "start speaking" feature in iBooks? (System Preferences Dictation and speech does not do anything to the speech speed.) The rate is a bit to slow.

How can I speed up the "start speaking" feature in iBooks? (System Preferences Dictation and speech does not do anything to the speech speed.) The rate is a bit to slow.

Hi, I had the same problem you described, and I noticed that there are two ways of activating text to speech on iBook for Mac, with different speed results (at least on my MacBook Pro Retina display)
On your iBook you can select the text and and then click on > More> Start speaking, and you will get a certain speed, which tends to be too slow.
But you will get the speed you had selected with "Go to System Preferences>Dictation and Speech>Text to speech. In there is a slider to adjust the speaking rate." if you use the TOP MENU (next to the black apple) under Edit>Speech>Start Speaking. I also learned that under System Preferences>Dictation and Speech>Text to speech, there is an option for a shortcut which is very helpful. And you can change Key. Hope this was helpful.

Why is my texting using data? When I have data turned off I can't send/receive. Texting is "unlimited" but it's using up all my data- help!

Why is my texting using data? When I have data turned off I can't send/receive. Texting is "unlimited" but it's using up all my data- help!

Texting longer text messages or any media (pictures/video/sound etc) being sent requires data to be active. However, it does not count against your data caps.
Since you have an iPhone, you must also be aware of the difference between iMessage and SMS Text messages. The iPhone, by default, will send an iMessage when sending another text message to anyone else with an iPhone, iTouch, or iPad. This does use your data if you are not connected to wifi. In Settings, you can turn iMessage off, and then all of your texts will go through Verizon.
Also understand- iMessage will use wifi when connected to wifi, but would need cellular data connection to work when not connected to wifi. Regular SMS text messages that are long or any media will always use the cellular data and not wifi, so will not send if cellular data is turned off, even if on wifi. However, this does not count against your cap.

Text Animation Speed in Executable

I am using Captivate 1. When I preview a slide with a text
animation object the animation runs beautifully, in the published
executable however it runs extremely lamely and the result is
unusuable. 'Delay (frames)' is set to 1. I was using the 'Feather'
animation, but have just tried 'Aimee Typing' and I get the same
problem. Is there any workaround for this?

Have you tried it?
I'm not here to lie to you or mislead you. The reason I
suggested more delay is because forcing the Flash animation to go
slower may actually improve it's performance, especially if you
have a video resources issue. One reason is because at a slower
rate, the immediate demand on resources will be lessened. Another
reason is because these are Flash animations, and playing them at a
very high speed can actually lock the animation. Or perhaps not.
My next suggestion was to require 100% preload prior to play,
but it is up to you ... that's probably a bad idea for a different
reason.
All we can do is offer suggestions based on our knowledge and
experience, and sometimes even our "hunches" - and hope it helps.
You don't have to take the advice, but if you are going to dismiss
it without a try I have to ask, why do you ask?
.

How can I speed up my MacBook Pro 5,1

I have a late 2008 MacBook Pro 5, 1
Processor:   Intel Core 2 Duo
Processor Speed:   2.4GHz
Number of Processors: 1
Total Number of Cores: 2
Memory 4 GB
SAT 320 Hard Drive
How can I speed this up.   I've updated to Maverick
I've read about adding an SSD - will this work?    Can a novice install???
Thanks, Linda

A model 5.1 MBP, late 15" 2008 can accommodate 8 GB RAM. That will help since you are using Mavericks. The best sources for Mac compatible RAM are OWC and Crucial.
linda66 wrote:
I've updated to Maverick
Snow Leopard is still the most efficient OSX from Apple. I use it on my 2010 MBP.
I've read about adding an SSD - will this work?    Can a novice install???
A SSD will enhance performance significantly in boot, shutdown and resource intensive applications. In all other aspects, performance will remain the same (such as e-mail, text edit, Internet browsing).
Installation is easy. Look at this video from OWC:
http://eshop.macsales.com/installvideos/macbookpro_15_unibody_hd/
Understand that SSDs are still expensive. Consider a hybrid drive, which I use. For a small premium in price compared to a conventional HDD you do get faster boot and shutoff times. The same in all other respects.
Ciao.

How can I get just the text to resize, rather than the entire web page?

I used to be able to re-size just text on a webpage by typing Ctrl + +. Today, the entire webpage re-sizes, and when I move to another page it reverts. (I see this mostly in Facebook.). Why did this change, and can I go back to having just the text re-size?

''How can I get just the text to resize -- zoom text only''
steps
#"Alt" if no menu bar, then
# View > Zoom > Zoom Text Only
Zoom text of web pages - MozillaZine Knowledge Base
:http://kb.mozillazine.org/Zoom_text_of_web_pages
<br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>

I can no longer read the text of my emails after I open them

All of a sudden I can no longer read the text of my incoming mail, however if I click to reply I can read text then

Go to Settings > General > Reset > Reset Network Settings; will not erase any data, just resets network connections such as wifi, and cellular data; Hope this helps.

HT4623 my iPhone can call out and receive text messages and emails but is not receiving any incoming calls

my Iphone can call ut and receive text/email messages but is not receiving incoming calls. What is your thought?

Hi Baileyfour,
Welcome to the Support Communities!
The articles below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
There are two places where vibrations can be set.
One is the Settings > Sounds
The other area is Settings > Notifications
If you have an app set to Alert, it may have a vibration set for it.
iOS: Understanding Notifications
http://support.apple.com/kb/ht3576
Information about Notifications settings can also be found in the iPhone User Guide (pages 131, 132)
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
I hope this information helps ....
Have a great day!
- Judy

Cap 5: Can I speed up a text animation?

Similar Messages

Maybe you are looking for