Cap. 5 -- Shuffled Answers of varying lengths not vertically aligning

I created a question pool all mutiple choice and have the answers in each question slide set to shuffle. The answers on some slides are different lengths (some one line, some two). I have tried to make all of them the same size, align vertically, however, once published and the answers shuffle the vertical spacing between if far from attractive. Any advice would be appreciated.

Are all answer captions the same height in pixels? If not, select the largest answer text caption first, then select all the others (via holding down Ctrl as you select) then use the relevant Alignment toolbar icon to set all to the same size and the first caption selected.
You'll have a better chance of everything looking neater if all captions are the same size, and prefereably that they're all the same number of lines (e.g. one or two). You may need to reword some of your answers to achieve this.

Similar Messages

HT1477 I am trying to install a new iPod Shuffle and my pc does not pick it up. My pc is running windows 8.1 os. I do not see that os in the list of operating systems.

I am trying to install a new iPod Shuffle and my pc does not pick it up.
My operating system is Windows 8.1 and windows 8 does not appear
in the list of operating systems.

You are referring to OFFICE 2010, not Windows XP or 7.
And which version of Windows do you have?
NEVER begin before you have a backup, ideally one you have tested and know works.
You don't really install Boot Camp, the Assistant is a partition tool utility.
You may just want Office 2008 for Mac.
If you need Office for Windows, perhaps run Windows in a VM like Parallels or Fusion.
Buy some backup drives and start using TimeMachine for one backup, then weekly backup with SuperDuper.
IF there is now a partition for Windows, all you need is to buy Windows, and I would recommend Windows 7 Home Premium (retail) which is about US$149.
Has nothing to do with free space. Office 2010 isn't to boot from. In fact, you can copy the disc to a folder (1.25GB) and run SETUP from there.

RSPC Variant does not exist - Could not find or load print parameters

We are on BI 7.0 (support pack SAPKW70017). We recently freshed test system from production.   After the refresh, we have problems opening all the process chains.
1. When I go to RSPC to open a process chain, I get many messages like this:
Variant &0000000067180 does not exist (there are different variant numbers)
Message no. DB612
Diagnosis
You selected variant &0000000067180 for program RSPROCESS.
This variant does not exist.
2. When I go to SM21 to check the system log, it displays many entries like below:
EJ F Could not find or load print parameters for step 1, job BI_PROCESS_TRIGGER/09134500
Documentation for system log message EJ F :
An error occurred during loading of the print parameters for a
background job step.
The print parameter record may have been deleted even though there was
a still a step that needed that data. This is an error as the
reorganization of the print parameters should prevent this from
happening.
To fix the problem, edit the step and save it, copy the job, or
schedule a new job. The print parameters will be regenerated in all
these cases.
3. I applied the OSS note 1169659 - Correction: Process variants not entered by BDLS.   The Basis rerun BDLS. But it did not fix the problem.
Would appreciate if someone could provide any help.
Thank you.

Hi Rebecca.
1) Please verify if exist process types called 'unknown job'. If exist: delete process types called 'unknown job' in your process chain. To do that please remove the chain from scheduling (menu bar > process chain > remove from schedule), afterwards switch the detail view on (menu bar > view) > right mouse click on the process type "unknown job" > displaying scheduled jobs > delete that job. After deletion of the 'unknown jobs' activate and schedule your process chain again.
2) After the removal of the 'unknown jobs' please check if the error messages with the missing variants pop up when calling your process chain disappears. If not, please implement and execute the attached report Z_FIND_JOBS_WITHOUT_VARIANT which deletes the jobs without variants.
I have already attached report as Report Z_FIND_JOBS_WITHOUT_VARIANT, you can download and create the report accordingly.
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
REPORT Z_FIND_JOBS_WITHOUT_VARIANT.
data: l_t_job type table of tbtcp with header line,
      l_s_varsel    TYPE rsvar,
      l_t_variant   TYPE TABLE OF rsparams.
parameters: delete type rs_bool.
select * from tbtcp as job into table l_t_job
                    where progname = 'RSPROCESS'
                    and   exists ( select * from tbtco
                          where jobname = job~jobname
                          and   jobcount = job~jobcount
                          and   status = 'S' ).
loop at l_t_job.
l_s_varsel-report = l_t_job-progname.
l_s_varsel-variant = l_t_job-variant.
CALL FUNCTION 'RS_VARIANT_CONTENTS'
    EXPORTING
      report               = l_s_varsel-report
      variant              = l_s_varsel-variant
      execute_direct       = 'X'
    TABLES
      valutab              = l_t_variant
    EXCEPTIONS
      variant_non_existent = 1
      variant_obsolete     = 2
      OTHERS               = 3.
if sy-subrc <> 0.
    write: / l_t_job-jobname, l_t_job-jobcount.
    if delete = 'X'.
      CALL FUNCTION 'BP_JOB_DELETE'
        EXPORTING
          JOBCOUNT = l_t_job-jobcount
          JOBNAME = l_t_job-jobname
        EXCEPTIONS
          OTHERS   = 1.
      IF SY-SUBRC <> 0.
        write 'not deleted'.
      else.
        write 'successfully deleted'.
      ENDIF.
    endif.
endif.
endloop.
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
I hope I can be helpful.
Thanks,
Walter Oliveira.

Fiscal year variant is not maintained for calendar year 2009

Hi,
After upgrade to BI 7.0 we are getting error: "Fiscal year variant & is not maintained for calendar year 2009" while opening a query through Bex Analyzer.
Basically it is happening like when we open a particular query, the Variable selection screen comes up, then on clicking the exection button (after selection) it shows SYSTEM_FAILURE exception & clicking the details button, shows the message ""Fiscal year variant is not maintained for calendar year 2009"
Please provide some information/resolution to this.
Thanks,
Shantanu.

HI,
Please ensure that you have defined your fiscal year variant in OB29
correctly. It is necessary that:
1. the previous year has been maintained,
2. an entry for Dec 31 exists in each fiscal year,
3. the following fiscal year has been maintained.
Hope this helps.
Regards,
Nitin

Ipod shuffle appearing on desktop but not in itunes?

Hi I have a second generation ipod shuffle, which when connected appears on my imac desktop. It automatically opens itunes but does not appear in itunes. I have used the disk utility to repair it, checked for updates, reset the shuffle yet to no avail... any suggestions please would be greatly appreciated

OK, I restarted the powerbook with the ipod plugged into the computer. Previously I had been plugging the iPod into an active computer. And lo and behold it is now recognized by iTunes. I'm not marking the Question as answered, because it may not work next time.

IMR7 : Creation of a new Screen Variant does not save Layout

Hello,
In IMR7, if I create a new screen Variant with a modified the default Layout field, the next time I log-in to SAP, system does not recognize my Layout selection.
Do you have a suggestion?
Thanks
François

Hello,
Thanks for your support but it did not resolved my problem.
When I save Layout I have three fields:
-Layout name
-User-specific checkbox
-Description
Even though User-specific is not checked, next time I relog to SAP and choose my Variant, the layout I have chosen in this variant is not keeped in memory. A layout named 4_SAP_IM is always displayed.
Do you have the same behavior?
Thanks
François

Fiscal year "A3" Variant is not maintained for Financila year 2010

Hello All,
while creating asset master using AS01 T Code i am getting an error "Fiscal year "A3" Variant is not maintained for Financila year 2010 for Compnay Code 0600".
but i have configured Fical year variant and assigned to co code, i am able to post the transactions for all the periods i.e financial year 2010.
here my question is whether we need to maintain the Fiscal year variant separately for Asset accounting in ECC 6.0.
Please Suggest
Thanks
Shankar

Hi Murali and Christian,
Thanks for your reply..
now i have configured year dependent fiscal year to my co code, if i configure calender year i am able to create the Asset master
please help
Thanks
Shankar

HT1339 I hit shuffle but the songs are not responding to that. HELP?

I hit shuffle but the songs are not responding? It was fine but in the last week this started to happen.

What do you mean by "not responding"? They do not play at all? They play, but not in random order (shuffle)? Is the nano able to play songs, if you play them from an album or artist listing?

'Input data length not a multiple of blocksize' error in CUP

Hello All
I receive the error below when trying to configure CUP. I got this error whilst trying to define the password for the RFC user created in the Connector screen in CUP. CUP doesn't accept the SAP password maintained in SU01. CUP only allows a 4 character password but SU01 is configured to only accept 8 characters. Full error message below.
'com.virsa.ae.commons.utils.StringEncrypter$EncryptionException: Input data length not a multiple of blocksize.'
Can anyone shed any light on this?

Hi All,
This issue is in Version 5.3 SP 7.1 of CUP. It occurs when we are trying to change the password for the CUP connector.
Please note that testing the connectors within the Content Administrator --> Maintain JCO Connections screens works fine and the risk analysis from RAR also works without issue. However, whenever we attempt to enter the password for CUP connecotr setup, it returns an error saying "Action Failed" with the 'Input data length not a multiple of blocksize' error showing in the trace logs.
We seem to be able to store a password of 4 characters e.g. 1234 but this then naturally fails the connection test.
Can anyone suggest a parameter setting to check or a resolution for this particular issue?
Thanks,
Simon

SAP BW DTP error: Fiscal year variant is not maintained for calendar year

Hi experts,
Running DTP for loading 2LIS_12_VCITM results in following error "Fiscal year variant A2 is not maintained for calendar year 2012".
I have already done following checks:
- the fiscal variant A2 exists for the fiscal year 2012 in the BW system (T009 tables)
- the DTP does only give this error for 2 company codes, and works fine for other company codes
- in our R3 system, the fiscal year variant A2 is assigned to all the company codes, how or where can I check this assignment in the BW system ?
Kind regards, Guy Verschueren

Hi
Please check the following threads
"Fiscal year variant V3 is not maintained for calendar year 2011" (OAOB)
Error FGV002: Fiscal year variant & is not maintained for calendar year &
Hope it helps.
Thanks,
Rajesh.
Please assign points to answers if you find them heplful

Fiscal year variant V3 not defined or maintained for date 01.01.2011

Hi Team,
While doing "ABUMN" we are getting below error message"
Fiscal year variant V3 not defined or maintained for date 01.01.2011
Message no. GMMASTERDATA108
if we change asset value date 02.01.2011, there is no error message.
we are getting error message only when asset value date is 01.01.2011.
Please let us know is there any problem 01.01.?
Thanks and Regards,
Ram

Hi Ashwin,
Yes I have maintained 31 days for JAN in OB29. Even though I'm getting the same information.
Could you give some other solution.
Thanks & Regards
SK.

Ipod shuffle 4th gen device does not appear in latest version iTunes

ipod shuffle 4th gen device does not appear in latest version iTunes

Mine is not recognized by PC-Windows, nor Itunes, and not by the "Mass Storage Device" removal Icon. I've done all the diagnostic tests, Uninstalled Itunes then reinstalling, etc.etc to no avail. Yet never had a problem with old generation Ipod, (died of old age) and Gloria's Ipod after two plus years is going strong with never an issue. I belive Apple is having significant problems with the 3/8 inch shorter newest Ipod generation. If your Ipod is still under warranty you need to call Apple support.

Since upgrading to Lion, my time machine backups are failing - error message: The backup disk image "/Volumes/Jackie Scanlon's Time Caps/Jacqueline Drabczynska's MacBook.sparsebundle" could not be accessed (error -1). Any ideas?

Since upgrading my Macbook to Lion, the time machine backups are failing - error message: "The backup disk image “/Volumes/Jackie Scanlon's Time Caps/Jacqueline Drabczynska’s MacBook.sparsebundle” could not be accessed (error -1)." I have rebooted the TIme Capsule and it worked OK, but don't want to do that every time. Any suggestions? Thanks

Any new info on this?
I had the exact same problem and went crazy and spent a hecka lot of time trying to deal with my brand new 2TB Time Capsule and almost brand new MacBook Pro. Then I thought I fixed it...and I tried SO MANY things, I don't really know what did it...except taking out any apostrophe's in names of stuff that Apple puts in there...BUT...now it's back.
Grrr...

Javax.crypto.IllegalBlockSizeException: Input data length not a multiple

Hi All ,
M worknig with NWCE 7.1.1. I have written code for decryption for decryption. Earlier my web dynpro application was on CE7.1. We migrated it to CE 7.1.1 just week ago after migrating to CE 7.1.1 , on execution of decryption code m gtting as
javax.crypto.IllegalBlockSizeException: Input data length not a multiple of blocksize
i have written following code for decryption.
public String decrypt( String encryptedString, String encryptionKey )
     String UNICODE_FORMAT = "UTF8";
     try
          if ( encryptedString == null || encryptedString.trim().length() <= 0 )
               throw new IllegalArgumentException( "encrypted string was null or empty" );
            byte[] keyAsBytes = encryptionKey.getBytes(UNICODE_FORMAT);
            keySpec = new DESKeySpec(keyAsBytes);
            keyFactory = SecretKeyFactory.getInstance( "DES" );
            cipher = Cipher.getInstance( "DES" );
          SecretKey key = keyFactory.generateSecret( keySpec );
          cipher.init( Cipher.DECRYPT_MODE, key );
          BASE64Decoder base64decoder = new BASE64Decoder();
          byte[] cleartext = base64decoder.decodeBuffer( encryptedString );
          byte[] ciphertext = cipher.doFinal( cleartext );
          return new String( ciphertext );
     }catch (Exception e){
          IWDMessageManager messageManager = wdComponentAPI.getMessageManager();
          messageManager.reportException("Error while Decryption");
          e.printStackTrace();
          return "";
This code was working fine in CE 7.1 . After migrating to CE 7.1.1 it started giving this error.

Thank you for your answer
how the code is usedI have hardcoded key, example
byte[] key = "123456789abcdefg".getBytes();and String for crypt (Example, String in = "green";)
Then I encrypt string in with code above (in qwestion body) and get exception IllegalBlockSizeException: Input data length not a multiple of blocksize
String encrypt(String in) throws Exception{
String out="";
byte[] key = "123456789abcdefg".getBytes();
Cipher ecipher = Cipher.getInstance("AES");
ecipher.init(Cipher.ENCRYPT_MODE, new SecretKeySpec(key, "AES"));
byte[] utf8 = in.getBytes("UTF8");
byte[] enc = ecipher.doFinal(utf8);
out = (new sun.misc.BASE64Encoder().encode(enc)).toString();
return out;
}Clients use JRE1.4 or high. I have JRE1.4 and all work correctly. Also, many clients have 1.4, but only part of they get exception. Code is in the server (this is part of servlet)
This function run in one thread and doesn't use shared resources

ORA-02005: implicit (-1) length not valid for this bind or define datatype

Error received when attempting to login to Portal 3.0.8.9 using Internet Explorer 5.50.4522.1800CO (from Oracle OBI 5.0).
Error does not occur when using Netscape 4.75. However, Netscape pegs CPU between every Portal page. I must maximize/minimize the Windows Task Manager in order for Netscape to move to next Portal page.
Both browsers work with other sites.
ORA-02005: implicit (-1) length not valid for this bind or define datatype
DAD name: portal30
PROCEDURE : PORTAL30.home
URL : http://hostname:port/pls/portal30/portal30.home
PARAMETERS :
============
ENVIRONMENT:
============
PLSQL_GATEWAY=WebDb
GATEWAY_IVERSION=2
SERVER_SOFTWARE=Oracle HTTP Server Powered by Apache/1.3.12 (Win32)
ApacheJServ/1.1 mod_ssl/2.6.4 OpenSSL/0.9.5a mod_perl/1.24
GATEWAY_INTERFACE=CGI/1.1
SERVER_PORT=80
SERVER_NAME=host
REQUEST_METHOD=GET
QUERY_STRING=
PATH_INFO=/pls/portal30/PORTAL30.home
SCRIPT_NAME=/pls
REMOTE_HOST=
REMOTE_ADDR=127.0.0.1
SERVER_PROTOCOL=HTTP/1.1
REQUEST_PROTOCOL=HTTP
REMOTE_USER=
HTTP_CONTENT_LENGTH=
HTTP_CONTENT_TYPE=
HTTP_USER_AGENT=Mozilla/4.0 (compatible; MSIE 5.5; Windows NT 5.0)
HTTP_HOST=host
HTTP_ACCEPT=image/gif, image/x-xbitmap, image/jpeg, image/pjpeg,
application/vnd.ms-powerpoint, application/vnd.ms-excel, application/msword,
application/pdf, */*
HTTP_ACCEPT_ENCODING=gzip, deflate
HTTP_ACCEPT_LANGUAGE=en-us
HTTP_ACCEPT_CHARSET=
HTTP_COOKIE=ses= (removed due to length limitations)
Authorization=
HTTP_IF_MODIFIED_SINCE=
HTTP_REFERER=

Hi Matt
Thanks for your help. Here's some extracts from a NUnit test case that I made to show ArrayBinding bombing on VARCHAR2(4000).
private void SetupAdapterAndCommandForArrays()
OracleParameter p9 = new OracleParameter();
p9.OracleDbType = OracleDbType.Varchar2;
p9.ParameterName = ":p_instr_array";
p9.CollectionType = OracleCollectionType.PLSQLAssociativeArray;
p9.ArrayBindSize = new int[]{4000, 4000};
p9.Size = 2;
p9.Direction = ParameterDirection.Input;
p9.ArrayBindStatus = new OracleParameterStatus[]{OracleParameterStatus.Success,OracleParameterStatus.Success};
OracleCommand comm = new OracleCommand();
comm.Connection = new OracleConnection("Data Source=aboded12_local;user id=pcm_app;password=pcm_app");
comm.CommandText = "PCM_OWNER.PKG_DAC_JASON.InsertStringArray";
comm.CommandType = CommandType.StoredProcedure;
comm.Parameters.Add(p9);
da = new OracleDataAdapter();
da.InsertCommand = comm;
da.InsertCommand.Connection.Open();
[Test]
public void TestStringArrayOf4000()
SetupAdapterAndCommandForArrays();
da.InsertCommand.Parameters[0].Value = new string[]{new string(Convert.ToChar("3"),4000), new string(Convert.ToChar("4"), 4000)};
da.InsertCommand.ExecuteNonQuery();
So when I run TestStringArrayOf4000() i get the : Oracle.DataAccess.Client.OracleException : ORA-02005: implicit (-1) length not valid for this bind or define datatype error.
If i run another test i have that sets up an array with less than 4000 this works fine.
any help you can offer is greatly appreciated!
Message was edited by:
[email protected]
Message was edited by:
[email protected]

Cap. 5 -- Shuffled Answers of varying lengths not vertically aligning

Similar Messages

Maybe you are looking for