Cap4 has gone insane with full motion recording

I'm using recording practices & settings that have been stable for years, but now when recording I'm getting hundreds of FMR slides when I should be getting about 5 or 6 still shots. Any ideas?
Thanks,
Jenny

I resorted to uninstall/reinstall--hopefully will not recur.

Similar Messages

Application & Runtime Error with Full Motion Recording

I keep encountering the following errors when trying to add
some full motion recording to an existing project in Cap2.
Application Error: Unknown software exception 0x0eedfade at
0x7c812a5b
Runtime Error: 217 at 01661812
After hitting end to stop recording project immediatly shows
these errors and closes. I am recording a web application using IE6
when this happens. Thoughts?

1) Upgrade to Captivate 3, which is better equipped to do
full-motion slides. If that isn't an option,
2) try planning your project without the need for
full-motion. If that isn't an option,
3) try another product which is better designed for
capturing "dynamic" actions. Captivate really isn't in its own
element doing full-motion captures of any length.
Sorry I don't have better news, tsumpter, but I hope the
thoughts are some help to you.
.

Cc text not displaying when using full motion recording

Hello everyone,
I wanted to find out if anyone has experienced a problem with
cc text not being displayed on slides with full motion recording.
I have added and sync'd the cc text on a slide that has full
motion recording. When publishing the file, no cc text appears in
the the published file.
Is there a workaround or a setting that I need to check to
ensure that the cctext shows up?
Any information which anyone can provide would be greatly
appreciated.
Sherry

Hi Sherry,
I'm having the same problem you were last year! Just wondered if you were able to find a workaround.
I have a full motion page with audio embedded in it (meaning that the audio does not show up as its own item in the timeline view). When I open the Advanced Audio Management dialog box, I'm not able to add a caption because CP4 doesn't think there's sound on this slide. (see attached screen grab -- the slide in question is slide 9. You see that the caption button is greyed out).
I've really hit a wall on this one today. I tried deleting the audio and re-adding it from the library, but it doesn't get added as an independent object in the timeline box; it just gloms onto the "captured animation" object.
Maybe it's simply not possible to have a closed caption on a FMR page? That doesn't seem right though.
Thanks, all.
Janet

Full motion recording in separated file then the main swf file . Why ?

Dear all,
When you publish your projet with
captivate 3 , now the full motion recording sequences are in
separated .swf files ...
I would have prefer to only have one .swf file with the
content and one with the skin as it was the case in
captivate 2 .
Is there an option I could change to only have the swf file
and the xx_skin.swf file
only ?
Imagine the mess I would have on my learning web site if I
had more then one swf file for each learning sequences (as I store
all .swf file in the same folder) :(

Hi all
What kiwikangaroo listed is John's method. Since the basic
process has already been outlined, I'll add some things that should
be considered as well as a caveat or two.
First, the existing project should be published to a
temporary folder. When publishing, it is rather critical that you
ensure that you are publishing for a Flash 7 target. I believe if
you choose Flash 8 or 9, the process will fall apart.
Once you have done this and are at the point where you are
inserting blank slides, make sure each blank slide is timed exactly
matching the slide with the Full Motion clip. Then you insert the
matching Full Motion clip from the temporary folder onto the blank
slide and delete the original. This will need to occur for all
slides containing full motion clips.
There are a few animations out in the gallery that if used,
will also cause additional .SWF files to be created. This is
because the animations that do this were published as Flash 8 or 9
and not 7 or earlier. I've sorted the ones that embed fine and the
ones that don't. So if you run into this issue, you either don't
use that particular animation, or you use something like SoThink
SWF decompiler (or open the .FLA) and recompile it using Flash 7 as
the target. That is, assuming you have Flash available and know how
to use it.
Cheers... Rick

Editing Full motion recording

Hi,
I have a full motion recording that is fine until I place a 100% solid highlight over some white thext that is on part of my desktop where I am recording, set it to arrange to back and or merge with background, but when a dialog box from the application I am recording comes up, it is partially hidden by my highlight box.
I have tried it with a smart shape too, but same problem comes up...and I cannot change the desktop background in my department at work.
Any help please, much appreciated.
Rossco

Rossco,
Are you talking about Video Demo recording? It is because you talk about 'merging with background', which is not possible when you are doing such a recording? The video editor allows only to put objects like highlight boxes on top of the video.
Lilybiri

'Ghost' lines on a PowerPoint presentation as Full Motion Recording in Captivate 5.5

I have created a PowerPoint presentation as Full Motion Recording with audio in Captivate 5.5. When I preview the resulting video or publish it the LMS there are 'ghost' lines on the slides, as if Captivate is picking up the PowerPoint textbox outlines or graphic placement guidelines. Is there any way I can remove these lines?
Alternatively, is there any other way to make a video of a PPT so that the animations work without any user interaction?

Thanks Lilybiri. I made a misyake about the version of Captivate - it should have read '5.5'.
I've started a new discussion.
Johnarmitage3

'Ghost' lines on a PowerPoint presentation as Full Motion Recording in Captivate 6.

I have created a PowerPoint presentation as Full Motion Recording with audio in Captivate 6. When I preview the resulting video or publish it the LMS there are 'ghost' lines on the slides, as if Captivate is picking up the PowerPoint textbox outlines or grahic placement guidelines. Is there any way I can remove these lines?

Thanks Lilybiri. I made a misyake about the version of Captivate - it should have read '5.5'.
I've started a new discussion.
Johnarmitage3

Updating my ipad and the screen has gone black with just the logo and update bar. I cant turn it on/off

Udating my ipa and the screen has gone black with just the apple logo and an updat bar. I cant turn it on/off.

TRY THIS TRICK.... IT HAS HELPED ME SO MANY TIMES!!!
hold down the power button and the home button for about 6-8 seconds or until the screen goes black....

My ipod touch screen has gone white with bright white spots, I have restored it but it is still white. It shows in ITunes but I cant do anything with it. Can anyone help please

My Ipod touch screen has gone white with bright white spots on it. I have restored it and it shows in ITunes but the screen is still white. Is there anything I can do? The warranty has run out so I will have to pay for any repairs (if it can be repaired). Any help would be much appreciated. Thank you in advance.

If you still have problems after restoring the iPod to factory defaults/new iPod then you very likely have a hardware problem. I would make an appointment at the Genius Bar of an Apple store.

What has gone wrong with the equalizer on the latest update, every single one is all distorted

what has gone wrong with the equalizer on the latest update, every single one is all distorted

I had a similar-sounding problem with version 11.1.2.31 x64. Every song I played sounded as if the speakers were being over-driven.
This problem was fixed after I installed the new verion: 11.1.2.32 x64. I am using Windows 7, too.

Something has gone wrong with my external hard drive after my macbook battery went off.. now i cannot paste or create new folder. Does anyone know how to fix this?

something has gone wrong with my external hard drive after my macbook battery went off.. now i cannot paste or create new folder. Does anyone know how to fix this?

Bus powered external drive?
Backups?
Does Disk Utility can see and repair the drive or not?
Also try here in future: MacBook Pro

Something has gone wrong with my version of pages since I did an update on 18th January

Something has gone wrong with my version of pages since I did an update on 18th January. I get an error message
"You need a newer version of Pages to open this document"

You have 2 versions of Pages on your Mac.
Pages 5 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You have a problem when opening a file with the wrong version.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Note: Apple has removed over 100 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
Peter

My ipad has gone black with only the Apple showing after I tried resetting , now nothing happens. Please help.

M y ipad has gone black with only the Apple logo showing afte I tried to reset. How can I restart.

First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
From Here
http://support.apple.com/kb/TS3281
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

My iphone screen has gone white with a few grey lines down the right hand side.. Has anyone any ideas how I can solve this and get my screen back to normal..? Thanks

my iphone screen has gone white with a few grey lines down the right hand side.. Has anyone any idea how I can solve this and get my screen back to normal..? Thanks

Hi tag71,
If you are having issues with the display on your iPhone, you may find the Display portion of the following article helpful:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Regards,
- Brenden

Condition has been found with out contition record.

Hi,
message 207(VE) is coming when in release invoice.
Condition has been found with out contition record(207VE)
please help.
Thanks,

Dear,
In pricing procedure for billing type there is one condition whose condition record has not been found so check that condition in transaction VK11 and check you have maintained any record. If not then maintain one.
System must tell you the condition type and if it does not then go to analyses in item condition screen and find one.
Regards,
Chintan Joshi

Cap4 has gone insane with full motion recording

Similar Messages

Maybe you are looking for