Cap4 - LMS Completion Issues

I've successfully used Captivate 3 to create a series of courses for our LMS (Hummingbird), and have now moved on to Captivate 4. However, my learners are now finding that our LMS is not giving proper completion credit, regardless of how many times they access and run through the courses. This seems to be happening now for courses created in Captivate 3 & 4. I went so far as to set up our LCR so that credit is given upon access, instead of completion. Basically, these guys should be getting completion credit just for opening the course.
There is no trend with regard to operating system (some are XP, others Win7), browser (we've tested them all...IE7, IE8, Chrome, Opera, FireFox) or Flash version (everyone is on Flash 10). HOWEVER, it seems as if the only folks who can successfully get course credit have an earlier version of Java (Version 6, Update 21 or below). Everyone who has this issue seems to be on Java Version 6, Update 22.
Has anyone else run into a similar issue?

We don't use Hummingbird, but our LMS Settings include an option called 'Finish causes immediate commit'; this is needed when suerver traffic delays the information sent back to the LMS after the course is closed.  You might check your LMS Settings for something similar ... good luck!

Similar Messages

  • SABA LMS Completion Status is always "Successful" -- even if quiz skipped

    For a course I'm creating, the SABA LMS Completion Status is always “Successful” even if just 1 slide of the Scorm 1.2 compliant Adobe Presenter course is viewed – doesn’t even need to get into quiz.
    A failing grade is also always "Successful". How to get an "Unsuccessful" for skipping the quiz and/or failing the quiz?
    Settings:
    Reporting - Quiz Manager:
    Enable reporting for this project -- checked
    Learning Managemenet System (LMS) -- Scorm
    Choose Report Data -- Report Quiz results only
    Report Pass or Fail -- Report Pass/Fail (should this be Report staus as defined by report data?)
    Report Score to LMS as: Percent
    Reporting Level -- Report interactions and the score

    I have Presenter courses working properly in Saba.  Sometimes the issue is your Offering or Content settings in Saba.  Could be a combo of having Is Scoring checked and having a Mastery Score set on Course or Offering level.
    When you dig down into the Activity History for that transcript completion, what status is listed on the module level?  Saba will roll up to a status of Successful/Unsuccessful/Not Evaluated depending on how you have it setup.  What Status is your content actually passing back: Completed, Incomplete, Passed, Failed?
    Good Luck!

  • LMS Backup issue (related with re-install HUM)

    Since the HUM evaluation period expired, I want to reinstall HUM 1.2 (LMS 3.2) because my customer didn't had enough time for evaluation.
    I order to do this, I have uninstalled the HUM 1.2 and reinstalled HUM. However, during the re-installation the mandatory automatic backup failed.
    The backup.log file doesn't contain any errors (backup completed). A manual backup seems to work fine and the system is working properly.
    What is causing this issue? or is there a way to skip the backup performed during LMS 3.2 (HUM only) installation.
    thanks in advance for any help

    we have purchased a (promo) HUM license now, but it doesn't include the media. How to get a copy of the HUM software
    Since I can't use the originally shipped HUM evaluation copy (installation fails on the backup as described in my original post)

  • Waiting for the previously running task to complete issue

    I am running the full extract process , and one task SDE_ORA_InventoryProductDimension running for 18 hours and its status is "Waiting for the previously running task to complete"
    but all running tasked are completed and left tasks are queued by this task, so what make this issue happen?
    I restart the informatica server and the task running now!
    but for this task I run before it has ten million records , and it always make the dataware house server's cache full and server down,
    so how to handle this problem?
    Edited by: Yu Yang on Apr 16, 2013 4:58 AM

    Check if /*+ FULL(PER_ALL_PEOPLE_F) */ hint existed in the SDE_ORA_INVENTORYPRODUCTDIMENSION_FULL mapping Source qualifier?.
    I suggest you to raise an SR and check with your DBA's if they can do something to improve the Performance.
    Mark helpfull if it helps.
    Regards,
    Veeresh Rayan

  • 30EA4 : Code Completion issues

    1.
    Code Completion got better in 30EA4, still I need to do 3 retries with 5 second gap in between. (both explicit and implicit)
    See log below.
    And where is preference for code completion log and deadline thresholds, Vadim promised
    30EA2 : Code Completion not working . Are they in 30EA4 ?
    2.
    Another issue in Code Completion is when I continue typing code completion list just get cleared then get repopulated with filtered value. We need to see new list with filtered value, but I wish the list not get cleared completely, instead just hide those items in the list not matching new filter.
    3.
    I want the Code Completion to fill in at lower case, do I have option to do that?
    (or you can also automatically decide case of Code Completion, if I started typing with lowercase fill in with lower case)
    Vadim asked for output log, here is the one I got, first one explicit call using ctrl+space, second on implicit call
    Exception in thread "InsightThread" java.lang.NullPointerException
    at oracle.dbtools.raptor.insight.CompletionInsight.colNamesMatch(CompletionInsight.java:1189)
    at oracle.dbtools.raptor.insight.CompletionInsight.joinConditions(CompletionInsight.java:1170)
    at oracle.dbtools.raptor.insight.CompletionInsight.complete(CompletionInsight.java:809)
    at oracle.dbtools.raptor.insight.CompletionInsight$InsightThread.run(CompletionInsight.java:399)
    Exception in thread "InsightThread" java.lang.NullPointerException
    at oracle.dbtools.raptor.insight.CompletionInsight.colNamesMatch(CompletionInsight.java:1189)
    at oracle.dbtools.raptor.insight.CompletionInsight.joinConditions(CompletionInsight.java:1170)
    at oracle.dbtools.raptor.insight.CompletionInsight.complete(CompletionInsight.java:809)
    at oracle.dbtools.raptor.insight.CompletionInsight$InsightThread.run(CompletionInsight.java:399)

    Hi,
    When I press ctrl+space after typing partial name of table (while doing select * from X___) the context menu appears, and when I select select the table name (by hitting Enter key) it doesnt replace what I had typed with what I have selected form list.
    e.g.
    If table name is customer
    select * from cust (hit ctrl+space here and select 'customer' from list)
    Now the statement appears like this
    select * from custcustomer
    Where I expect is code completion should replace what I have typed once I select the right name from list.
    Am I missing some basic settings here
    My SQL Developer version is 3.0.04
    Regards,
    Bhupendra

  • Captivate 4 - LMS Completion Status Updating

    Hello,
    We recently published Captivate 4 assessments to our LMS (Learn.com LearnCenter) that have a 3 attempt limit and require a score of 80% or greater to pass.  We are finding that many will fail the first time, and when they pass the assessment on their second attempt the LMS gains the new higher % score but does not gain the "completed" status.  Any ideas on what could be causing this?
    Thank you,
    Connor

    Is the Captivate quiz set for multiple tries? I'd assume so...
    If it's sending the updated score, it is likely sending the updated status...
    But only way to be sure it to see what the Captivate lesson is actually sending.
    If your LMS does not offer any way to 'trace' or otherwise see the actual lesson communication, perhaps try something like 'SCORM Cloud' (websearch) or the Reload Editor. I know the first, and perhaps the second, offer ways to see the actual communication between the lesson and the LMS.
    (the official ADL Test Suite also offers this functionality but is more complicated to use, at least last time I tried it).
    IF you can validate that the CP lesson is indeed sending the updated status to the LMS, but the LMS is not showing that updated status, then it's something to take up with your LMS vendor.
    If CP is not sending that updated status...then it's a CP setting...somewhere...(I don't have any precise things to try, but the setting the quiz to allow retakes would be the first thing to look at).
    HTH
    Erik

  • Captivate 6 issue. Exits and says not complete/issues with videos too

    I use Captivate 6 on a Mac and I publish to SCORM 2.0. Previously we used Captivate 5.5 on a PC and had no problems at all.
    Our e-learning portal provider (World Manager) does not support questions when created in Captivate, so we have always added questions on at the end via the e-learning portal to register 'compete'. This has worked 98% of the time (mostly within 5.5), but occasionally seems to have the following issues:
    It can exit if there is a video inserted (this is sporadic at best - some modules are happy with vids, others are not)
    It exits and says 'not complete' rather than going into the questions - again this is sporadic, and works for some modules and not others.
    All modules have been created from ones that previously worked. Content activities and copy/images would be the only changes - no back end/exit commands have been changed. We seem to have the most problems with Cap 6. I previously installed a patch sent to me from Adobe to fix the issues I had previously with Flash files (this did not fix it either).
    I am utterly at a loss and seem to have tried everything. Please help!
    Thanks, Jen

    Hi Rod, thanks for the reply.  Like I say in the post because of the way the contract is set up (I'm arms-length subcontracting for the physical training provider) I'm not allowed on client site, nor to contact users directly, so am having to trouble shoot via email with single-point-of-contact middleman.)  The arrangement is every bit as frustrating as it sounds, but is what it is.
    So I am taking their word for it. 
    That said, I've no reason to doubt them as the same issue has been reported independently from different physical locations, and all the test users will have managed to find their way sucessfully through far more complex functionality before they get stuck at that point.
    I know that from time to time when you run flash locally you can have problems launching URLs unless local flash player settings are updated to allow it - is there any network level equivalent that a company (or even local machine) may have in place that could cause the same behaviour?   Or am I barking up the wrong tree?

  • LMS Completion Status Reporting Incorrectly

    We currently use Learn.com as our LMS solution. When we publish our Captivate projects to the LMS, users course completion status is marked as
    'Completed' after they have opened the course and viewed the first slide.  I've set our reporting settings from the Preferences>Quiz>Reporting to Complete/Incomplete and Slide Views only to 100%.  I don't understand why it's reporting completed when users have only viewed one slide.

    Hi,
    Which version of Captivate are you using?
    What are the Quiz Reporting Settings? Have you published to SCORM or AICC?
    Please let us know.
    Thanks,.
    Sushma

  • 3.1EA2/EA1 : Code completion issues

    Hi,
    OS Win 7, JDK 1.6_11 shipped with SQL Dev, againts Oracle 9iR2.
    I find lots of improvement on the new code completion feature.
    However I also find lots of defects on it, here are they :
    1. Code completion often offers long exhaustive list of possibility that cause the list to scroll pass the bottom part of SQL Dev instead of giving us a small window with vertical scroll bar in it.
    2. Code completion does not offer field list on the following :
       select *
       from   mytable1 t
       inner join mytable2 x on x.  -- does not show field list
       select *
       from   mytable1 t
       inner join mytable2 x on x.fi  -- does not show field list starting with 'fi'
       select *
          from   tmp_bow_data_aloy1 x
          inner join
            select *
            from   tmp_bow_data_aloy2 y
            where  y. <Ctrl + Space>  -- does not show field list
       select *
          from   tmp_bow_data_aloy1 x
          inner join
            select *
            from   tmp_bow_data_aloy2 y
            where  y.acct_card_no = x.   -- does not show field list
       update mytable1 t
       set    t.  -- does not show field list
       delete from mytable1 t
       where  t. -- does not show field list
       3. Code completion mix between statement although has been delimited with ';'
       select *
       from   mytable1 x;
       select *
       from   mytable2 y
       where  <Ctrl + Space>  -- shows all mytable1's fields as well as mytable2's fields
       Hope these would be fixed on next EA.
    Regards,
    Buntoro
    Edited by: Buntoro on Nov 18, 2011 3:52 AM
    Add EA2 to title

    Hi Vadim,
    I can confirm most of the issues have been fixed on 3.1EA2.
    Thank you for that.
    As for now, this 'challenging case' is the one that I work with most of the time.
    select *
    from   departments x
    inner join
      select *
      from   locations l
      where  l.location_id = x.
    )I am still hoping for the fixed.
    Btw, the 3rd problem on which code completion mix between statement although has been delimited with ';' is the one that bothers me a lot.
    It certainly a showstopper for using the code completion.
    You cannot hope anymore from the unreliable code completion since it will mess up with the query.
    I would like to give a more straightforward case just by adding another query on top of it :
    select *
    from   employees x
    inner join employees y on y.manager_id = x.employee_id;
    select *
    from   departments x  -- here I put the same alias as employees
    inner join
      select *
      from   locations l
      where  l.location_id = x.  -- <Ctrl + Space>, hm... why department table showing these field list ???
    )From the above example, you will notice that the 'challenging case' is displaying the fields from wrong tables.
    It suppose to be from departments table, instead of the employees one above it.
    Another problem also arise from above case.
    4. Code completion does not work if there is 'failed to be parsed' statement above the current within the same worksheet.
    select *
    from   employees
    where  department_id = ;  -- hm.... I forget what's id that department is. Okay, let me leave it here first, and query the department tables
    select *
    from   dep -- <Ctrl + Space>, wait.... why is it not working??FYI, 3.0 seems working nicely.
    Hopefully this will be fixed too.
    Regards,
    Buntoro

  • How solve Grey Loading screen when LMS completion is 100% done

    Hello,
    I've read quite a lot of threads on the "grey loading screen" in this forum but the content remains buggy when i plug the content on an LMS with 100% completion
    To reproduce the bug the user should :
    1-Complete the course
    2-Close the course
    3-Re Open it
    4-Move to a previous slide
    5-Close the content
    6-Use IE and syfadis as LMS
    When we try to relauch the course, the grey loading screen appears and never goes.
    I tried the hotfixes proposed but nothing happened.
    Do you have any idea ?

    1-Complete the course
    2-Close the course
    3-Re Open it
    4-Move to a previous slide
    5-Close the content
    6-Use IE and syfadis as LMS
    7The content should embed quizs

  • Name completion issue

    I have a weird one.
    I have a user who has an issue with Name completion. She types a name and the name completion pops up a name as it should. You press enter and this is where it gets weird. A window pops up with choices to choose from. I know is there are more than one email address for a person this will happen giving choices for the desired mail address. But in this case it lists anyone in the groupwise address book and frequent contacts that contain that particular group of letters to choose.
    It seems this setting, whatever that may be, is held in this particular users Windows user profile. I can log in as me to the workstation and the problem does not happen if I login to groupwise either as myself or as the user. If I login to the workstation as the user, This happens no matter if I am logged into Groupwise as me or as the user.
    Any ideas???
    Dave Burek

    Hi Dave,
    If I am understanding your situation correctly, this is a client side setting. On the affected workstation open the GroupWise client. Open a New Mail and then in the TO: box right-click your mouse and deselect "Search Mode"
    Let us know how it goes.
    Cheers,

  • SVN Tab Complete issues (space after each complete)

    Morning all,
    I've got a weird issue with my SVN tab complete using Bash, it adds a space after each item it completes - for example: Say there is a directory 'foobar' with a file 'zomg' within that, I'd type 'svn add fo' and then hit tab - however, this results in 'svn add foobar ' (note the space). This is highly annoying, as I can no longer hit 'z' then tab to complete it to 'foobar/zomg', I have to remove the space, then go again (it does it for everything, so adding something like 'foobar/zomg/wtf/bbq' is a nightmare.)
    So far it only does it with Bash, I've not been able to test it on other shells. Subversion 1.4.6-4 on an up-to-date Arch install with core, extra and community repos enabled (however it has done it from the very start of me using Arch, so it's not a recent update that killed it).
    Regards,
    Last edited by AlexC_ (2008-09-20 16:13:48)

    Hi AlexC_ :-)
    I suspect that it may be an issue with /etc/bash_completion. This is the relevant part from my /etc/bash_completion.
    # svn completion
    have svn &&
    _svn()
    local cur prev commands options command
    COMPREPLY=()
    cur=${COMP_WORDS[COMP_CWORD]}
    commands='add blame praise annotate ann cat checkout co cleanup commit \
    ci copy cp delete del remove rm diff di export help ? h import \
    info list ls lock log merge mkdir move mv rename ren \
    propdel pdel pd propedit pedit pe propget pget pg \
    proplist plist pl propset pset ps resolved revert \
    status stat st switch sw unlock update up'
    if [[ $COMP_CWORD -eq 1 ]] ; then
    if [[ "$cur" == -* ]]; then
    COMPREPLY=( $( compgen -W '--version' -- $cur ) )
    else
    COMPREPLY=( $( compgen -W "$commands" -- $cur ) )
    fi
    else
    prev=${COMP_WORDS[COMP_CWORD-1]}
    case $prev in
    --config-dir)
    _filedir -d
    return 0;
    -@(F|-file|-targets))
    _filedir
    return 0;
    --encoding)
    COMPREPLY=( $( compgen -W \
    '$( iconv --list | sed -e "s@//@@;" )' \
    -- "$cur" ) )
    return 0;
    --@(editor|diff|diff3)-cmd)
    COMP_WORDS=(COMP_WORDS[0] $cur)
    COMP_CWORD=1
    _command
    return 0;
    esac
    command=${COMP_WORDS[1]}
    if [[ "$cur" == -* ]]; then
    # possible options for the command
    case $command in
    add)
    options='--auto-props --no-auto-props \
    --force --targets --no-ignore \
    --non-recursive -N -q --quiet'
    @(blame|annotate|ann|praise))
    options='-r --revisions --username \
    --password --no-auth-cache \
    --non-interactive -v \
    --verbose --incremental --xml'
    cat)
    options='-r --revision --username \
    --password --no-auth-cache \
    --non-interactive'
    @(checkout|co))
    options='-r --revision -q --quiet -N \
    --non-recursive --username \
    --password --no-auth-cache \
    --non-interactive \
    --ignore-externals'
    cleanup)
    options='--diff3-cmd'
    @(commit|ci))
    options='-m --message -F --file \
    --encoding --force-log -q \
    --quiet --non-recursive -N \
    --targets --editor-cmd \
    --username --password \
    --no-auth-cache \
    --non-interactive --no-unlock'
    @(copy|cp))
    options='-m --message -F --file \
    --encoding --force-log -r \
    --revision -q --quiet \
    --editor-cmd -username \
    --password --no-auth-cache \
    --non-interactive'
    @(delete|del|remove|rm))
    options='--force -m --message -F \
    --file --encoding --force-log \
    -q --quiet --targets \
    --editor-cmd -username \
    --password --no-auth-cache \
    --non-interactive'
    @(diff|di))
    options='-r --revision -x --extensions \
    --diff-cmd --no-diff-deleted \
    -N --non-recursive --username \
    --password --no-auth-cache \
    --non-interactive --force \
    --old --new --notice-ancestry'
    export)
    options='-r --revision -q --quiet \
    --username --password \
    --no-auth-cache \
    --non-interactive -N \
    --non-recursive --force \
    --native-eol --ignore-externals'
    import)
    options='--auto-props --no-auto-props \
    -m --message -F --file \
    --encoding --force-log -q \
    --quiet --non-recursive \
    --no-ignore --editor-cmd \
    --username --password \
    --no-auth-cache \
    --non-interactive'
    info)
    options='--username --password \
    --no-auth-cache \
    --non-interactive -r \
    --revision --xml --targets \
    -R --recursive --incremental'
    @(list|ls))
    options='-r --revision -v --verbose -R \
    --recursive --username \
    --password --no-auth-cache \
    --non-interactive \
    --incremental --xml'
    lock)
    options='-m --message -F --file \
    --encoding --force-log \
    --targets --force --username \
    --password --no-auth-cache \
    --non-interactive'
    log)
    options='-r --revision -v --verbose \
    --targets --username \
    --password --no-auth-cache \
    --non-interactive \
    --stop-on-copy --incremental \
    --xml -q --quiet --limit'
    merge)
    options='-r --revision -N \
    --non-recursive -q --quiet \
    --force --dry-run --diff3-cmd \
    --username --password \
    --no-auth-cache \
    --non-interactive \
    --ignore-ancestry'
    mkdir)
    options='-m --message -F --file \
    --encoding --force-log -q \
    --quiet --editor-cmd \
    --username --password \
    --no-auth-cache \
    --non-interactive'
    @(move|mv|rename|ren))
    options='-m --message -F --file \
    --encoding --force-log -r \
    --revision -q --quiet \
    --force --editor-cmd \
    --username --password \
    --no-auth-cache \
    --non-interactive'
    @(propdel|pdel|pd))
    options='-q --quiet -R --recursive -r \
    --revision --revprop \
    --username --password \
    --no-auth-cache \
    --non-interactive'
    @(propedit|pedit|pe))
    options='-r --revision --revprop \
    --encoding --editor-cmd \
    --username --password \
    --no-auth-cache \
    --non-interactive --force'
    @(propget|pget|pg))
    options='-R --recursive -r --revision \
    --revprop --strict --username \
    --password --no-auth-cache \
    --non-interactive'
    @(proplist|plist|pl))
    options='-v --verbose -R --recursive \
    -r --revision --revprop -q \
    --quiet --username --password \
    --no-auth-cache \
    --non-interactive'
    @(propset|pset|ps))
    options='-F --file -q --quiet \
    --targets -R --recursive \
    --revprop --encoding \
    --username --password \
    --no-auth-cache \
    --non-interactive -r \
    --revision --force'
    resolved)
    options='--targets -R --recursive -q \
    --quiet'
    revert)
    options='--targets -R --recursive -q \
    --quiet'
    @(status|stat|st))
    options='-u --show-updates -v \
    --verbose -N --non-recursive \
    -q --quiet --username \
    --password --no-auth-cache \
    --non-interactive --no-ignore \
    --ignore-externals \
    --incremental --xml'
    @(switch|sw))
    options='--relocate -r --revision -N \
    --non-recursive -q --quiet \
    --username --password \
    --no-auth-cache \
    --non-interactive --diff3-cmd'
    unlock)
    options='--targets --force --username \
    --password --no-auth-cache \
    --non-interactive'
    @(update|up))
    options='-r --revision -N \
    --non-recursive -q --quiet \
    --username --password \
    --no-auth-cache \
    --non-interactive \
    --diff3-cmd --ignore-externals'
    esac
    options="$options --help -h --config-dir"
    COMPREPLY=( $( compgen -W "$options" -- $cur ) )
    else
    if [[ "$command" == @(help|h|\?) ]]; then
    COMPREPLY=( $( compgen -W "$commands" -- $cur ) )
    else
    _filedir
    fi
    fi
    fi
    return 0
    complete -F _svn $default svn
    _svnadmin()
    local cur prev commands options mode
    COMPREPLY=()
    cur=${COMP_WORDS[COMP_CWORD]}
    commands='create deltify dump help ? hotcopy list-dblogs \
    list-unused-dblogs load lslocks lstxns recover rmlocks \
    rmtxns setlog verify'
    if [[ $COMP_CWORD -eq 1 ]] ; then
    if [[ "$cur" == -* ]]; then
    COMPREPLY=( $( compgen -W '--version' -- $cur ) )
    else
    COMPREPLY=( $( compgen -W "$commands" -- $cur ) )
    fi
    else
    prev=${COMP_WORDS[COMP_CWORD-1]}
    case $prev in
    --config-dir)
    _filedir -d
    return 0;
    --fs-type)
    COMPREPLY=( $( compgen -W 'fsfs bdb' -- $cur ) )
    return 0;
    esac
    command=${COMP_WORDS[1]}
    if [[ "$cur" == -* ]]; then
    # possible options for the command
    case $command in
    create)
    options='--bdb-txn-nosync \
    --bdb-log-keep --config-dir \
    --fs-type'
    deltify)
    options='-r --revision -q --quiet'
    dump)
    options='-r --revision --incremental \
    -q --quiet --deltas'
    hotcopy)
    options='--clean-logs'
    load)
    options='--ignore-uuid --force-uuid \
    --parent-dir -q --quiet \
    --use-pre-commit-hook \
    --use-post-commit-hook'
    rmtxns)
    options='-q --quiet'
    setlog)
    options='-r --revision --bypass-hooks'
    esac
    options="$options --help -h"
    COMPREPLY=( $( compgen -W "$options" -- $cur ) )
    else
    if [[ "$command" == @(help|h|\?) ]]; then
    COMPREPLY=( $( compgen -W "$commands" -- $cur ) )
    else
    _filedir
    fi
    fi
    fi
    return 0
    complete -F _svnadmin $default svnadmin
    _svnlook()
    local cur prev commands options mode
    COMPREPLY=()
    cur=${COMP_WORDS[COMP_CWORD]}
    commands='author cat changed date diff dirs-changed help ? h history \
    info lock log propget pget pg proplist plist pl tree uuid \
    youngest'
    if [[ $COMP_CWORD -eq 1 ]] ; then
    if [[ "$cur" == -* ]]; then
    COMPREPLY=( $( compgen -W '--version' -- $cur ) )
    else
    COMPREPLY=( $( compgen -W "$commands" -- $cur ) )
    fi
    else
    command=${COMP_WORDS[1]}
    if [[ "$cur" == -* ]]; then
    # possible options for the command
    case $command in
    @(author|cat|date|dirs-changed|info|log))
    options='-r --revision -t \
    --transaction'
    changed)
    options='-r --revision -t \
    --transaction --copy-info'
    diff)
    options='-r --revision -t \
    --transaction \
    --no-diff-deleted \
    --no-diff-added \
    --diff-copy-from'
    history)
    options='-r --revision --show-ids'
    prop@(get|list))
    options='-r --revision -t \
    --transaction --revprop'
    tree)
    options='-r --revision -t \
    --transaction --show-ids \
    --full-paths'
    esac
    options="$options --help -h"
    COMPREPLY=( $( compgen -W "$options" -- $cur ) )
    else
    if [[ "$command" == @(help|h|\?) ]]; then
    COMPREPLY=( $( compgen -W "$commands" -- $cur ) )
    else
    _filedir
    fi
    fi
    fi
    return 0
    complete -F _svnlook $default svnlook
    Hope this helps.
    Last edited by alanhaggai (2008-09-21 02:08:12)

  • LMS Discovery Issue

    We have a customer with an issue with LMS discovery.
    It will discover new devices but will fail to update them to the  DCR, because it does not match the credential set policy when the  credential set is defined by Device name and an SNMP OID is used.
    They have different devices and depending on the type  they use different credentials, Wireless AP’s for example use different  credentials to Routers.
    They can match on other fields to get a large amount of devices discovered however are still missing the majority.
    With little knowledge of this product, can anyone tell me if this is supported?
    Thanks
    Colin

    Hi Colin,
    Credentials set policy has nothing to do with the devices getting updated in DCR.
    while configuring the device discovery settings do not select any DCR credentilas set.
    One thing that you need to make sure is that devices are SNMP reachable and the Community string that you are using in the device disocvery settings should be CORRECT.
    Thanks
    Afroz

  • Lms few issues

    Hi Netpro
    i have lms 4.2 runing on windows , i have the below issues:
    1)i cant open the topology service , using IE 8.0 with only java installed in my client that comes built in with lms even though i have applied the same setting mentioned on the configuration guide related to IE setting
    2)i have few devices mentioned unconnected even though the have cdp enable with with correct community string
    3)i heard that you can send one command to all devices managed by LMS at once , how and from where you can do that?
    thanks
    ibrahim

    LMS may not need a serial number. But still you can get a Contract that covers LMS to open a TAC case.
    If it is just a confirmation on that patch you are referring to, you can check that here in CSC as well. If that patch is available in CCO you can download and install and no need of a TAC guidance on it.
    -Thanks
    Vinod

  • Acrobat X Pro Auto Complete Issues

    Does anyone else find this feature unusable? Every time I try to type something new in a field on a fillable pdf form the auto-complete makes its suggestion and I can't override it. In 8 Pro you could just keep typing and the auto-complete would recognize the new value and allow you to complete the field yourself. I have tried both the basic and advanced auto-complete with the same results. I have also found that it you clear the edit entry list that it is only for that individual pdf. How can you delete the edit entry list throughout the whole program at once? Any help or comment would be apprieciated

    Hi there,
    Could you provide some more detail about your file(s)?  Are there any common elements between the files you've been converting to PDF via the PDFMaker Ribbon or the Adobe PDF printer that are disappearing?  Is the text that's disappearing all of a certain font?
    I'd like to try to help if you could upload a sample file or provide some additional detail!
    Thanks,
    David

Maybe you are looking for