Capacity confused plz help

Hello
i bought a new IPAD 2 64 GB 3G ios 4.3.3
when i bought it i notice that its capacity about 59GB then i got trouble in it so i use to restore it and i download the software again from itunes about 614 mb after that it works perfect but the ipad capacity 58.68 GB is this natural?
also i want to know what is ment by others i have 1.06 GB and i dont know what is this see the picture
i am help me asp

Read this for an explanation on disk capacity:
http://support.apple.com/kb/TS2419
and this for the "Other" category:
http://www.faqoverflow.com/apple/7853.html
Regards.

Similar Messages

N8 camera setting confusion.plz help!

i have notice that when taking photo at 9mp,it takes the whole screen whereas when taking photos at 12mp, there are to black band on both side of the screen.
please refer to my attached photos tfor better understanding.
is that normal??plz help me,am confuse.
Solved!
Go to Solution.
Attachments:
on 9mp.JPG ‏304 KB
on 12mp.JPG ‏184 KB

This is normal. Sony Ericsson Vivaz have the same thing. I noticed that the phone lacks auto focus similar to vivaz. You need to press the camera button to get a image focused. This works huh, less well. To get best "autofocus/picture" i noticed that you should press the take photo on the cell phone screen. It performs a better autofocus. I really hate that the phone dont autofocus all the time like my Logitech webbcam or old Vivaz phone... SE vivaz ran symbian also. In fact i hate it Nokia fix it!!!

My nano is confused plz help it

Hey all, earlier I had transfered a bunch of music over to my nano but didn't eject it correctly so all the songs do not appear. This is ok because I can just reload them, however now when I load itunes and go the my ipod, it says it is 2.36gb full - however when viewing my song list on the nano or on itunes no songs appear, I try to add songs but I can only fill up the remaining space of 1 gb ish. There must be a way to wipe it completely or some how make it realize that it actually has 4gb free? Or are the songs there but the pod doesnt know its there?? eeeeek lool please help!! thx

now I'm having issues with it claiming that it is out of batteries however its been on charge for about 3 hours and it hasn't been used in like 3 days. My ipod updater i've had to restart numerous times, it either crashes, says that it doesnt have an ipod connected, or that the ipod files are in use somewhere else. However it is in correct on all levels. I'm seriously becomming frustrated with this thing!

Confused plz help someone

Can i get ios 7 for ipod 4 because some of my friends have ios 4 on there ipod 4?

No
. As Apple said in June, iOS 7 is not compatible with the 4G iPod.
All the iOS devices compatible (iPhone 4 and later, iPad 2 and later, and 5G iPod touch) with iOS 7 have at least 512 MB of memory (RAM). The 4G iPod only has 256 MB

Which is the best for me?plz help me .I've more confusing about my Career.

I've done B.E Computer Science and Engineering year of 2013. Currently i'm doing IT-Support Engineer job. I've only 7 months experience. But i know how to install,Mounting of the blade server.but i don't know about windows servers.but i can install server
OS.i have lot of confusion and fear also,about my career.which is suitable for me?plz help me.frnds.

Hi, Ravi.
Based on your experience, you may want to start working your way to earning an MCSA for Windows Server 2012 R2. It requires you to pass three exams. The first exam you may want to take on is 70-410 which is on install Windows Server 2012.
Here is the MCSA: Windows Server 2012 certification title description:
http://www.microsoft.com/learning/en-us/mcsa-windows-server-certification.aspx
As you can see, it will require you to pass three exams. Here they are:
70-410 Installing and Configuring Windows Server 2012
http://www.microsoft.com/learning/en-us/exam-70-410.aspx
70-411 Administering Windows Server 2012
http://www.microsoft.com/learning/en-us/exam-70-411.aspx
70-412 Configuring Advanced Windows Server 2012 Services
http://www.microsoft.com/learning/en-us/exam-70-412.aspx
Microsoft offers free online training through different web sites. Consider these as a few of the many resources you can use to study for these exams.
TechNet
http://technet.microsoft.com/en-US/
Microsoft Virtual Academy
http://www.microsoftvirtualacademy.com/
By the way - if you are still in school and prefer a more entry-level certification, you can also consider the MTA certification track designed for college students:
http://www.microsoft.com/learning/en-us/mta-certification.aspx
Good luck!
Best wishes, Davin Mickelson

My hp v155w give I/0 error. its capacity is 8 gb but it cannot take more than 3 gb..plz help me

my hp v155w gives I/0 error. when i format it with hp format utility a quick format has succefully done.,,, but when i tries to full format.. it has not done and show the error as I/0 error, 0x1ac00000 error or autometicallly reject and write protected. another problem is that when i copy or transffer data from pc to it ,it takes ony l less than 4gb but it has a capacity of 8 gb... plz help me

arrgh, I've got the same issue when i open garageband: "File \U201Ccom.apple.garageband.cs\U201D is not a GarageBand †‰-†» File!"
then when I exit garageband, garageband locks up, and I have to force quit every time... anyone???

Hello, i designed a logo in RGB format,1600 X 900 pixel...i m using this logo in website and also i wanted to print it in broucher...i m cofused for the setting n size...plz help

i m confused about logo size and format plz help me out...@

You can design one logo for both purposes. But you cannot save just one file suitable for both. You need to make the design and then make a reduced size JPEG or PNG for your web site. You also need a version for print, but unless you know what is needed you cannot save it. Just keep the original PSD until you hear what your printer or designer needs for the brochure.

URGENT: Date format in Reports Giving me trouble...plz help me out

Hi guru's Can any one help me out
I
n the front end apps we are getting the date value as
BOM_SRS_DATETIME_STANDARD
Where we are entering the date value as MM/DD/RRRR HH24:MI:SS
The date format set in the company is like RRRR/MM/DD HH24:MI:SS
SO I format masked the date parameter in .RDF to RRRR/MM/DD HH24:MI:SS format.
While the actual date format in the data base is like DD/MM/RRRR HH24:MI:SS.
I checked all the old reports and the date format is like they masked the date format to company format and used the afterparameter trigger like bellow:
if :P_SENT_DATE_FROM is not null and :P_SENT_DATE_TO is null then
:P_SENT_DATE_TO := :P_SENT_DATE_FROM;
end if;
if (:P_SENT_DATE_FROM = :P_SENT_DATE_TO) and (:P_SENT_DATE_FROM is not null) then
:WHERE_SQL := :WHERE_SQL || ' AND CREATION_DATE = '||' to_date('''||:P_SENT_DATE_FROM||''''||','||'''DD-MON-RR'')';
else
if :P_SENT_DATE_FROM is not null then
:WHERE_SQL := :WHERE_SQL || ' AND CREATION_DATE >= '||' to_date('''||:P_SENT_DATE_FROM ||''''||','||'''DD-MON-RR'')';
end if;
if :P_SENT_DATE_TO is not null then
:WHERE_SQL := :WHERE_SQL || ' AND CREATION_DATE <= '||' to_date('''||:P_SENT_DATE_TO ||''''||','||'''DD-MON-RR'')';
end if;
end if;
I tried this but i couldnt get the output either.
I am pretty much confused.
Plz help me out...

If you want to use a dynamic where caluse in your report query you can use a Reference Cursor using REF CUR QUERY tool in your report like this :
function QR_1RefCurDS return DEF_CURSORS.CHARACT_REFCUR is
temp_CHARACT DEF_CURSORS.CHARACT_refcur;
begin
IF :FROM_NO IS NULL AND :TO_NO IS NULL THEN
open temp_CHARACT for SELECT ACCT_CODE, ACCT_NAME
FROM CHARACT
ORDER BY ACCT_CODE;
ELSIF :TO_NO IS NULL AND :FROM_NO IS NOT NULL THEN
open temp_CHARACT for select ACCT_CODE, ACCT_NAME
FROM CHARACT
WHERE ACCT_CODE=:FROM_NO
ORDER BY ACCT_CODE;
ELSIF :TO_NO IS NOT NULL AND :FROM_NO IS NOT NULL THEN
open temp_CHARACT for select ACCT_CODE, ACCT_NAME
FROM CHARACT
WHERE ACCT_CODE BETWEEN :FROM_NO AND :TO_NO
ORDER BY ACCT_CODE;
ELSIF :TO_NO IS NOT NULL AND :FROM_NO IS NULL THEN
open temp_CHARACT for select ACCT_CODE, ACCT_NAME
FROM CHARACT
WHERE ACCT_CODE<=:TO_NO
ORDER BY ACCT_CODE;
END IF;
return temp_CHARACT;
end;
But first you have to declare a cursor type in a package

After updating to iOS 6 my battery life of iPad 2 has reduced drastically..plz help..have tried all the standard solutions suggested in forums but doesn't help

After updating to iOS 6 my battery life of iPad 2 has reduced drastically..plz help..have tried all the standard solutions suggested in forums but doesn't help

The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

Plz help! Urgent!

I want to delete my windows partition, but the Boot Camp Assistant is showing up a dialogue that says that my startup disk is not able to add or delete any partitions. It tells me to go to disk utility and reformat my drive as MAC OS Extended (Journaled), but it already is plz help me fix this.

You may be confusing your drive with your Mac OS Volume. Your hard drive contains one or more volumes (or partitions), one of which is named "Macintosh HD". If you open Disk Utility, don't click on "Macintosh HD". Click on the hard drive brand just above "Macintosh HD". You will then see 5 tabs in the main pane. Click on "partition". Does it show both the Macintosh HD and a Windows volume? Does it say "this disk appears to be partitioned for Boot Camp"? When you tried to remove Windows, did you use Boot Camp Assistant from an administrative account?
Do not erase your disk without making a backup! Don't try to do anything without making a backup (using Time Machine, say). But if you see the Windows partition, you might try just dragging the bottom of the Macintosh HD partition down to take over the Windows partition, and then click "Apply". Make a backup first! This particular suggestion might not work unless you use Disk Utility by booting from the Leopard DVD, and it might erase your entire disk, and not just Windows.

Using InputMap and ActionMap to detect any key pressed...plz help

Hi,
I am quite new to Java. I have a tiny problem. I wanna put an actionlistener into a JTextField, so it printout something whenever a key is pressed (when the textField is selected).
I can only get it to print if I assign a specific key to pressed...example below (works):
JTextField searchBox = new JTextField();
InputMap imap = searchBox.getInputMap();
ActionMap amap = searchBox.getActionMap();
imap.put(KeyStroke.getKeyStroke(KeyEvent.VK_A, 0), "pressed");
amap.put("pressed", new AbstractAction() {
          public void actionPerformed(ActionEvent e) {
               System.out.println("TYPEEEEEEEEEEEEEEE");
HOWEVER, when i change keystroke to any key pressed, it doesn't work. Example below(doesn't work):
JTextField searchBox = new JTextField();
InputMap imap = searchBox.getInputMap();
ActionMap amap = searchBox.getActionMap();
imap.put(KeyStroke.getKeyStroke(KeyEvent.KEY_PRESSED, 0), "pressed");
amap.put("pressed", new AbstractAction() {
          public void actionPerformed(ActionEvent e) {
               System.out.println("TYPEEEEEEEEEEEEEEE");
Somebody plz helps me. I am really confused how to use KeyEvent.KEY_PRESSED. I thought it would work the same way as KeyEvent.VK_A...if i can't use KEY_PRESSED for that purpose, what KeyEvent do I use?
Thank you very much in advance.

Sounds like you want a KeyListener.
textField.addKeyListener(new KeyListener() {
    public void keyTyped(KeyEvent e) {
        System.out.println("Key typed.");
    public void keyPressed(KeyEvent e) {
        System.out.println("Key pressed.");
    public void keyReleased(KeyEvent e) {
        System.out.println("Key released.");
});See the API documentation for more information.

Plz help!! idempotent methods stateful session beans? (failover)

          plz help!! idempotent methods stateful session beans? (failover)
          Hi there,
          Im trying to failover my shopping cart implemented using stateful ejb, the replication
          is working but the failover is not (Object not found exception....).
          By design is hard to think on an stateful ejb using idempotent methods, but after
          checking the documentation in detail im completely confused, so im starting to
          wonder if i should use idempotent methods or manual retry in case one server is
          down.
          Plz take a loo at these explanations about faiolver in the WLS edocs.
          "....With clustered objects, automatic failover generally occurs only in cases
          where the object is idempotent.....Because of this, replica-aware stubs will not,
          by default, attempt to retry a method that fails after the request is sent but
          before it returns. This behavior can be overridden by marking a service idempotent..."
          BUT
          "By default, a stateful session bean's Home stub provides load balancing and failover
          for its method invocations to any clustered server where the bean is deployed...."
          So is possible to achieve automatic failover (not only load balancing) for stateful
          ejb without having to worry about state-changes or manual retry. (i know the retry
          is requiered if the server crashed just before finishing a transaction but this
          is not what im talking about).
          Any help will be highly appreciated
          Alan


          Ryan,
          Yes, im deploying using In-memory replication and clusterable elements, when try
          to invoke the method (after one of the nodes is down) i recieve an "java.rmi.NoSuchObjectException:
          Bean has been deleted".
          I believe all this could be related to some sort of issue with JNDI Lookup in
          the cluster, but haavent been able to get a clue to make it work....(almost desesperate
          by now)
          Alan
          "ryan upton" <[email protected]> wrote:
          >Alan,
          >
          >If the state isn't maintained during failover I would suspect a
          >configuration error. Have you set the <replication-type> element within
          ><stateful-session-clustering> tag in the bean's deployment descriptor?
          >
          >"Alan" <[email protected]> wrote in message
          >news:40e17cf7$1@mktnews1...
          >>
          >> Ryan,
          >>
          >>
          >> Maybe i didnt explain myself, in the scenario im dealing with I KNOW
          >the
          >method
          >> finished succesfully (example, the user succesfully added an item to
          >a
          >cart).
          >>
          >>
          >> Just after that one of the nodes goes down, and the user decides to
          >add a
          >new
          >> item (new invocation , not a retry of failed one) on the same session.
          >>
          >> This is the case in which failover should work automatically as you
          >say,
          >meaning
          >> the new method invokation should be able to retrieve the session state
          >info from
          >> the replica and switch the primary.....Well, this is the part wich
          >isnt
          >working
          >> :( as i understand it should transparently
          >>
          >> I believe could be a config issue , but have no way to make it work.
          >>
          >> Regards,
          >>
          >> Alan
          >> "ryan upton" <[email protected]> wrote:
          >> >
          >> >"Alan" <[email protected]> wrote in message
          >news:40e06296@mktnews1...
          >> >>
          >> >> Ryan,
          >> >>
          >> >> Thanks for clearing the both conditions a bit more, in this case
          >my
          >> >issue
          >> >has
          >> >> to do with the scenario #1 in which subsequent calls (invocations)
          >> >go to a
          >> >node
          >> >> which isnt avaliable(down), do you have any idea of in what conditions
          >> >the
          >> >"automnatic"
          >> >> failover would fail??? (meaning why the stub would try to dispatch
          >> >a call
          >> >to the
          >> >> same previous node)
          >> >>
          >> >> Thanks for the help again
          >> >>
          >> >
          >> >Subsequent calls won't go to a node that's down. That's the whole
          >> >point
          >> >;-). Failover is always automatic, what you are getting confused
          >on
          >> >is
          >> >automatic method re-execution upon failover which happens if the method
          >> >has
          >> >been marked as idempotent. The logic is this: if I failover to an
          >EJB
          >> >that
          >> >I know is still alive, I can't safely call the same method again.
          > Why?
          >> >Because I don't know how much of the method completed the last time
          >before
          >> >the previous bean's failure. So if the bean can yield multiple results
          >> >from
          >> >multiple invocations I had better play it safe and not re-execute
          >the
          >> >method
          >> >on the bean I failed over to (unless it's idempotent because in that
          >> >case it
          >> >doesn't matter how many times I call it, it always does the same thing).
          >> > In
          >> >scenario #1 and #2 failover is automatic and all new calls are executed
          >> >against the bean the client failed over to, but only idempotent methods
          >> >are
          >> >re-executed.
          >> >
          >> >
          >>
          >
          >

Plz Plz Help:

Hi all
i have posted a question before on Anonymous server as well. Can any one plz tell me , how can i implement Anonymous Server in java. Plzplz help its urgent..
Thanks in anticipation
regards
waqas

Hi ggainey
Thanks a lot for ur time and help , wud plz answer my following few questions
1- I've worked a bit in Socket programming,but i dont have a grip on it. My first question is can i build all of my server 's totally by using Sockets, i mean is it possible to build my servers with out using JSP's and Servlets...im askin u koz im new in network programming( Actaully i am thinking to build All of my Server's GUI on JBuilder and then communicate among them using Sockets..Is IT Possible??? if its not possible then what shud i do in order to build this Distributed System(Actually this is my undertgraduate project i.e. Secure Electronic Voting , and i have never use JAVA on such a large scale and im really confused what to do...so plz plz plz help me a little))
2-What is JSF? and what do u mean by " You need to understand javax.mail.* and SMTP to be a mailer." ..do u mean that i have to study thouroughly java.mail.* Package and SMTP Protocol i.e. may be u mean to study its RFC
3- Do you know any Java library besides Cryptix and IAIK which implement cryptographic protocols like "Bit Committment and Blind Signatures"
thanks a lot for taking some time from ur valuable time...plz try to mail at ur earlies....take care
regards
waqas

FI Part in Travel management --- Plz help me out!!!!!!

Hi Peers
Help me out!!!!!
basically i have doubts on how it the entries happen in FI. Will there be any entry when the Credit Card Company submits the Bills? there will be an entry for payment to credit card company ryt! so wat wld be that entry? will entry made while receiveing the invoice n the entry made during payment be cleared. like they do in GR/IR case.
My next doubt is, we receivce the invoice from credit card company n the payment is made, will this not reflect while preparing the expense reoprt per personnel no./ Travel Request. how will that look like when the expense eport is sent to accounting dept n they make a posting.
I'm basically very much confused abt this, if you can help me out then i owe you so much as i'm in a very difficult situation.
If you can sedn me step by step journal entries like, what happens and the entries when the credit card company send the bills, what happen and the entries when the payment is made to the credit card company, what happens and the entries when the expense report is submitted. If you ahve any docs related to this, it wld be of great help to me. IF you can send me ur phone no, i wld also call you. Plz help me out yaar.
If you have the list of entries related to Travel Management, plz send me as it wld be of great help to me. Expecting your reply ASAP

Expenses to the compnay are accrued teh moment the credit card compnay raises the Invoice on the company. Irrespective of whether you deduct any thing from employee or not, compnay need to pay to the card company.
After the receipt of card statement.
Employee a/c Dr
   Credit card company Cr.
Now employee submits his claim. This can be after or before the credit card statement.
Expenses a/c Dr
   Employee a/c with the approved amount.
When you pay credit card company
Credit card compnay account dr
Bank
   Employee
When you recover the balance amount from the employee on excess spending,
Bank a/c dr if paid in cash
To Employee account
or Salaries Payable a/c Dr (If recivered from Salary)
   Employee a/c
Hope you understood
Reward points if useful.
sarma

Got Noise in the Speaker after plugging external display. plz help.

Hi guys, i just bought the apple Mini DisplayPort to VGA Adapter, but as soon as i plug it in, i got annoying noise comes out from my speaker.
im using M box Mini as my audio interface.
at first i thought it might be the wiring noise, so i moved the M box away from the external display, and moved the usb cable to varies position, but didnt work..
guys plz help. the noise is just there constantly never give me a break!! really driving me crazy!! cant work with that noise,. plz help guys

sorry
i was getting confused with this rig i got here fsb should have been 166 for athlon 2600. as for the not display no boot i just had to wait a little longer as the capitors kept on for ages eventually reseting the bios settings allowing boot.
just tested the radeon seems to be running ok now - no crashes so far maybe 1.9 fixed it
cheers

Capacity confused plz help

Similar Messages

Maybe you are looking for