"Capacity in which acting" on the W-8BEN form

Hello, what should I fill in the "*Capacity in which acting*" on the W-8BEN form??
I am an individual developer, not company.
Thank you.
Raymond

Well, you almost answered your own query:
Just write "Individual" on that field.

Similar Messages

Add 2nd sharpening step which acts upon the results of the first step

Consider adding a 2nd sharpening step which acts upon the results of the first step. For artsy reasons, you might want normal sharpening, then enhance edges as a second step. For lower quality images, two sharpenings can be an effective form of noise reduction. For whatever reason I often run two sharpening steps in a row in CS5, where the second step would look bad without the first.

Scott T Martin wrote:
Lightroom already has 3 levels of sharpening: "capture" sharpening in the develop module (detail panel), "creative" sharpening with the localized adjustment brush and "print" sharpening in the print module.
Is there a problem with the current implementation that you think could be improved?
A good example is one I had yesterday: a raw camera file of a water action shot where it is desirable to have two sets of sharpen settings, --one finer radius (.8 to 1.2) for the normal sharpening of the shot, and then another step which is a coarse one (about 2.1 + separate detail/masking setting) to enhance water droplets. The second masking only applies to the second step, thereby preserving the desirable sharpened detail of the first step. This allows the water droplets to be targeted in a narrow bandwidth, and made spherical and sparkely, giving the photo depth. The same could apply to coarse animal hair, ice crystals, etc. The reason I want the sharpen steps in "capture" mode is so they can be copied separately and pasted to multiple photos.
The only way to do this now is to use CS5 to sharpen the water droplets after the normal sharpen which then severs the chain of Lightroom history. It's much harder to reverse a previous change once Photoshop is resorted to. And subsequent changes do not behave the same on a non-raw image.
What type of image content are you using that the current set of tools isn't satisfactory? (ie: are you talking about camera RAW files or film scans that were shot out of focus? More details would help.)
Actually both. Other uses I've had for a second sharpening step is to target, and enhance edges on lower quality scanned images. However I have less of a problem fixing these images in Photoshop because: they are usually one-of-a-kind, and they have no raw data to work with. I just make sure the scan is as accurate as possible and that becomes the starting point.
The brush sharpen is handy but not for the above purpose requiring a different radius. And of course copy/pasting brush strokes does not work on action photos.
I hope this helps to clarify my request

How to know which table in the database a form is accessing

Actually Im new to oracle applications,
Im getting an error when i open a form from system administrator responsibility saying that table doesnot exist.
My basic doubt is, how to know which table in the database a form is accessing.
Any response is higly appreciated.
Thanks,
Praveen
Edited by: user10239520 on Sep 10, 2008 7:07 AM

Take a look at the following thread:
Is there a query log in EBS?
Re: Is there a query log in EBS?

Delete blog in iweb which acts as index to whole website

Does anyone know if I can delete one of my blogs on my website which acts as the opening page of the site, in other words as the index?
My files got corrupted, and although I've gone to .mac and downloaded the whole site, I can't make iWeb see the full set. I'm at the end of my tether and just feel my only option is to delete the blog itself and try to create a new one and somehow make it the index again.
For reference the website is:
http://www.parkroadict.co.uk
Thanks for any help!

Hi jbrown,
The first My_Blog is actually a folder. The second My_Blog.html is the main blog page in that folder. All your blog entries will be put in the folder My_Blog.

1. I have an iPod which has purchases synced with I tunes with an apple ID. I now have an iPad with a new ID for cloud. I have cloud storage capacity of 5gb which came with the iPad. How can I use one ID and store my existing music in cloud?

1. I have an iPod which has purchases synced with I tunes with an apple ID. I now have an iPad with a new ID for cloud. I have cloud storage capacity of 5gb which came with the iPad. How can I use one ID and store my existing music in cloud?

HI Frostyfrog
CHeck out iTunes Match which has an annual fee of £21 or thereabouts. You can store a maximum of 25,000 songs there and they all become available on your other kit, iPhone, iPad and iPod. I know it works as I have over 23000 songs uploaded of which only a few we're bought through iTunes.
it works by comparing your music to the whole iTunes music dadata base so you access the same tunes that you could get from iTunes. If you have obscure stuff, it uploads your own music to the cloud as a copy.
I Find it incredible that on my iPhone with its 16gb memory I can view almost 200 gb of music (ie my 23000 songs) and play any of them. Anything I add to iTunes becomes available via the cloud fairly quickly from a few minutes or a little longer if adding a lot.
The first time you use it it will take quite a while to match your music if you have a lot, but after that it is all automatic. Read the stuff on the apple site. Your PC needs to be at least running Vista. I recommend it and at less than 50p a week it's good value.
Good luck

Hello there, I am creating a database of all our companies press contacts. I would like to create a form that would act as the front end and feed the database which is obviously the back end. The database is in Access 2013. My question is to whether this

Hello there, I am creating a database of all our companies press contacts. I would like to create a form that would act as the front end and feed the database which is obviously the back end. The database is in Access 2013. My question is to whether this is indeed possible?

This forum thread appears to point towards the problem.
Re: Unable to Switch Audio Sync Settings

Why am I unable to delete the default track (which seems to act as the master, right?) after making a rough mix? Is it possible to delete the default track after having rendered a mix?

Why am I unable to delete the default track (which seems to act as the master, right?) after making a rough mix? Is it possible to delete the default track after having rendered a mix? I did a rough mix and now cannot change the song as the tracks that were a part of the rough mix seem to remain in the song even though I mute the tracks for a new mix. For instance, I played and recorded a different bass line. Muted the original, but when trying to create the new mix I can hear the original bass line even though I have muted that track. It seems to remain in the previous master (default) track. Please send help. Thank you.

Before answering your question, you have to make sure you understand the difference between the different track types in GarageBand.
Tracks, you record your music on
There are three types of those Tracks.
MIDI Tracks (aka Software Instrument Tracks)
Audio Tracks (aka Real Instrument Tracks)
Drummer Track (only one per Project)
Global Tracks
These are the Tracks that can be shown/hidden at the top of the Tracks Area for specific purposes.
Arrangement Track
Movie Track
Transposition Track
Tempo Track
Master Track
This Track can also be shown/hidden in the Tracks Area. Please note, you cannot delete that Track, only hide it, similar to the Global Tracks
Regarding the Tracks you record your music on, you can delete any of those. It doesn't matter if you created them or there are part of a Template (maybe that is what you refer to as the default track). Once you delete the last Track, the "New Track Window" will pop up to add a new track.
I will explain all that in much more detail in my manual "GarageBand X - How it Works".
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

Is there a way to transfer all my old files in an USB hard drives to a larger thunderbolt connected hard drive through Aperture so it acts as the DAM?

I just got the 27" iMac but I don't want to burden it with all my photo files which are presently on 2 external HDs (USB 2.0 but one has FW800). I plan to transfer all these files to a new 4Tb HD via thunderbolt which will be my new working HD. Then I will put the old HDs in a an off site place for security. I want to access all the files by letting Aperture act as the digital asset manager. What is the fastest way to accomplish this?

I think the best place to ask this question would be in the Aperture forum, as they would know what you'd need to change in Aperture to deal with the moves.
Here's a link for you:
https://discussions.apple.com/community/professional_applications/aperture?view= discussions

When I look at my Ipod on Itunes on my laptop it is showing that I have a large amount of storage space taken up with Apps. (more than my music). In fact I only have the Apps which came with the ipod touch! How do I get my storage back?

I have an ipod touch 64GB. I have 3,146 songs, 3 videos, 106 photos and 1 app. The capacity of my ipod is 58 GB (I guess the remainder is the OS), It says I have 7.6GB remaining. When I look at my ipod on Itunes on my laptop the bar at the bottom shows a huge amount of storage space is taken up by Apps. I don't have any apps apart from the ones which came with the ipod touch which I cannot erase and wouldnt really want to. I am baffled why it says so much storage has been taken up by Apps! Please help me!!!

Connect the iPod to your computer and look at the storage used by the various categories as shown in the colored bargarph in iTunes.
Come back with the results.
An "other" larger than about 1 1/2 GB usually indicates that the "other" includes corrupted files. Usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
To restore from backup see:
iOS: How to back up
To restore to factory settings/new iPod see:
iTunes: Restoring iOS software

Which one is the best way to collect config and performance details in azure

Hi ,
I want to collect the information of both configuration and performance of cloud, virtual machine and web role .I am going to collect all these details using
java. so Please suggest which one is the best way.
1) REST API
2) Azure SDK for java
Regards
Rathidevi
rathidevi

Hi,
There are four main tasks to use Azure Diagnostics:
Setup WAD
Configuring data collection
Instrumenting your code
Viewing data
The original Azure SDK 1.0 included functionality to collect diagnostics and store them in Azure storage collectively known as Azure Diagnostics (WAD). This software, built upon the Event Tracing for Windows (ETW) framework, fulfills two design requirements
introduced by Azure scale-out architecture:
Save diagnostic data that would be lost during a reimaging of the instance..
Provide a central repository for diagnostics from multiple instances.
After including Azure Diagnostics in the role (ServiceConfiguration.cscfg and ServiceDefinition.csdef), WAD collects diagnostic data from all the instances of that particular role. The diagnostic data can be used for debugging and troubleshooting, measuring
performance, monitoring resource usage, traffic analysis and capacity planning, and auditing. Transfers to Azure storage account for persistence can either be scheduled or on-demand.
To know more about Azure Diagnostics, please refer to the below article ( Section : Designing More Supportable Azure Services > Azure Diagnostics )
https://msdn.microsoft.com/en-us/library/azure/hh771389.aspx?f=255&MSPPError=-2147217396
https://msdn.microsoft.com/en-us/library/azure/dn186185.aspx
https://msdn.microsoft.com/en-us/library/azure/gg433048.aspx
Hope this helps !
Regards,
Sowmya

Fn acting as the mute key

I use a T60 2007-4CG, which I love and decided to promote it to W7 because of its very decent screen and sufficient hardware capabilities.
I applied all BIOS patches and I now face one weird issue : I discovered in W7 that each time I pressed the Fn key, it was interpreted as if I pressed the mute key.
Initially, I found it was a problem related to W7, so I reinstalled it, with no luck. Still the same problem.
After several tests, I'm now sure it is related to the BIOS :
when booting and accessing the BIOS, I can no longer press Fn + Page Up to lit the keyboard. This means that even in the BIOS, the key is not correctly interpreted.
Moreover, if I activate the Fn lock in the BIOS, then, the behaviour is slightly different : the first hit on Fn acts like mute, but the second (if pressed fast enough) acts as the Fn key has been pressed, thus enabling me to lit the keyboard (for example). This trick works in the BIOS setup pages and in W7.
I tried to downgrade my BIOS, but it did not change anything.
Has anyone encountered the same issue ? Is there anything I can try to restore the normal behaviour of the Fn key ?
Thanks

A full symptom list can be found here (and in a couple of the posts above it) - http://h30434.www3.hp.com/t5/Other-Notebook-PC-Questions/Tapping-FN-key-acts-as-if-it-s-being-held-D...
I'm not a fan of reposting but I would really like to get an answer on this, it's been so long since I originally posted it and I am convinced that it is a firmware issue (see other post for reasons; it's OS-independent but only happens when actually *in* an OS, not in BIOS settings pages or the GRUB bootloader)

Which Distro has the fastest boot time?

As the title which Linux has the fastest boot time? Anything faster than 10 Sec is worth to mention.
However, I do want a few thing out of it. I would like some kind of GUI, Web browser, Music Player of some kind, and a good Text editor, along with some CLI software.
I am working on a project on my computer, which allow me dual boot directly from a CF card with a IDE to CF adapter or load it into my powerful OS(Arch Linux). For the most part, you just want to do a quick E mail check before you leave the house. And you don't want the computer on for like 8 hours sitting there doing nothing but waste energy. So I think it would be a good idea to do so. Due to the limitation of my case, I can only have one hard drive. And I don't want to use that one drive to dual boot my computer.
I am really looking in something that only need a few seconds.
hehe Thanks

Faunos has a nice "live" OS that boots to KDE with archlinux packages (600) and can boot in ~60 secs. It operates in ram which gives it a speedy performance.
I have it booting from a Compact flash UDMA device in an Intel based computer using either an IDE to CF or a sata to cf adapter, each powered by the normal FDD five volt connector.
The UDMA CF cards reach 45MB/sec read speed. When booting with the CF cards into a "live" system, there are no writes until the user desires to "save session" to an overlay. To avoid writing to the boot device, an alternate device can be used via USB, for example, to retain the desired packages in a repo.
Faster ram will speed the boot process. Also, if one uses a repo device(another CF for example) much of the boot package load can be placed in that repo for install as needed. This could reduce the boot time considerably.
In my system, I have a repo built from 2 CF cards in raid0 with 15+GB capacity and utilize bookmarks for loading packages from the repo. This repo has 80+ mb/s speed.
Perhaps this is of interest to you....Cfast is coming which will improve the read/write speed while in sataII to a probable 160MB/sec for a single Cfast card.
EDIT: If you boot to CLI, the boot time is reduced and e-mail is available.
Last edited by lilsirecho (2008-10-04 19:20:11)

I lost 3 GB storage capacity of my iPad mini2,the system says I have used 10.1 GB, I count it by myself, the actual usages of storage is 6.4 GB, I know the system it self count some space,I hate the iOS 7.1,I didn't encounter this kind of problem in ios6

I lost 3 GB storage capacity of my iPad mini2,the system says I have used 10.1 GB, I count it by myself, the actual usages of storage is 6.4 GB, I know the system it self count some space,I hate the iOS 7.1,I didn't encounter this kind of problem in ios6

How much space is used by your Other? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
How to Remove “Other” Data from iPhone, iPad and iPod Touch
http://www.igeeksblog.com/how-to-remove-other-data-from-iphone/
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6/7, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
What is “Other” and What Can I Do About It?
https://discussions.apple.com/docs/DOC-5142
iPhone or iPad Ran Out of Storage Space? Here’s How to Make Space Available Quickly
http://osxdaily.com/2012/06/02/iphone-ipad-ran-out-of-available-storage-space-ho w-to-fix-quick/
6 Tips to Free Up Tons of Storage Space on iPad, iPhone, and iPod Touch
http://osxdaily.com/2012/04/24/6-tips-free-up-storage-space-ipad-iphone-ipod-tou ch/
Also,
How to Clear Message/iMessage Cache on iPhone & iPad And Reclaim Lots of Free Space
http://www.igeeksblog.com/how-to-clear-message-imessage-cache-on-iphone-ipad/
 Cheers, Tom

Which is better the March 09 MBP 15 2.66ghz or the June 09 MBP 15 2.53??

I found a deal or I think I did 1699 for the 3/09 2.66 but I am not sure if spending that extra money on the mid range previous version will be a better choice than the lower end current 2.53 model. Will the 2.66 be a better buy? Faster etc.
Thanks to All

You are getting more bang for the buck with the 2.66GHz model. Although it's "old" there are a lot more pros than cons (in my opinion).
1) 2.66GHz Late 2008 has two graphics processors --> 2.53GHz Early 2009 does not
2) 2.66GHz Late 2008 has ExpressCard slot which you can put in an SD card reader adapter inside to act like the dedicated (and NO ExpressCard slot) SD slot on the Early 2009 2.53GHz model
3) The VRAM in the 2.66GHz Late 2008 is 512MB whereas in the 2.53GHz Early 2009 it's 256MB
4) The hard drive in the 2.66GHz Late 2008 is 320GB vs. the 250GB in the 2.53GHz Early 2009
5) The price is a steal for $1699 considering it used to be $2499 and it's on par with the price for the 2.53GHz Late 2009 which retails for $1699 but with less offerings as outlined above! Not to mention the "same" model 2.66GHz Late 2009 which costs more and still has "less" specs in a sense.
I say go for it!!
Here's my source (click on links 17 and 20-- you'll have to count it, sorry):
http://www.everymac.com/systems/apple/macbook_pro/index-macbookpro.html

I have files that have been on my computer for over a year and all of a sudden they wont open and an error message comes up saying they were improperly downloaded or came in an email attach which is not the case

I have files that have been on my computer for over a year and I have used them several times and all of a sudden they wont open. I received an error message saying they are improperly downloaded or came as an email attachement which is not the case. Please advise

They seem to be word files - they will open if I choose "open with" microsoft word, but if I double click they don't open they are appearing as PDF on my screen. I even opened one and then tried to "save as" making sure I chose .doc and they still appear as PDF
I just created a new document response.doc in word and when I saved to my desktop it appears as a PDF file and I absolutely did not create a PDF or save as PDF it was a simple word
doc.
The message says "Adobe reader could not open response.doc because it is either not a supported file type or because the file has been damaged (for example attached in an email and not properly decoded)
The reader version is I believe the most current, I always update when prompted. OS is Windows 8

"Capacity in which acting" on the W-8BEN form

Similar Messages

Maybe you are looking for