Capacity Leveling(CM25 Transaction)

Xperts,
could you please give us some documentation/online material on Capacity Leveling(CM25 Transaction)?
Rewards for your inputs.

hi
To Know about Capacity levelling, u can use this thread
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PPCRPLVL/PPCRP_LVL.pdf
http://help.sap.com/erp2005_ehp_02/helpdata/en/8a/a58eb24adc11d189740000e8322d00/frameset.htm
regards
Palaniappan

Similar Messages

Issue with Capacity Levelling-CM25

Hi Everyone,
We use CM25 for capacity levelling.
Issue:
Total Capacity req. = 186.8 Hr
Available Capacity on 01.01.2012 on the resource = 380.2 Hr
Now when I try to dispatch the capacity req. for a planned order manually on 01.01.2012, system distributes the capacity-
Distributed   Period
        5.0    31.12.2011
      23.8    01.01.2012
      23.8    02.01.2012
      23.8    03.01.2012
      23.8    04.01.2012
      23.8    05.01.2012
      23.8    06.01.2012
      23.8    07.01.2012
      15.6    08.01.2012
    186.8
But we want to dispatch capacity say on one particular day or split it onto two different days i.e. 90 Hrs on 01.01.2012 & 90 Hrs on 02.01.2012. Is it possible? If yes, how?
Additional Information-
Capacity Defination in resource-
No. of indiv. cap.   16
Operating time       23.76
Capacity             380.16
Relevant to finite scheduling
Thanks,
Parashar.

Hi Amol,
Thanks for your input.
As I have said I already have Capacity more than what is required.
Capacity Available per day: 380.2 Hr
Total Capacity Requirement: 186.8 Hr
I am trying to know that whether what issue has been raised is possible to solve in Capacity Levelling & How.
We are not maintaining shifts in SAP at present.
Thanks,
Parashar.

Work schedule display in capacity leveling cm25

Hello,
In our company we have created a work schedule (tcode OP4A) and have associated to a work center (tcode IR02).
However, capacity leveling (tcode CM25) doesn't display the work schedule associated to our workers in the graphical planning table.
Do you have any idea how to solve this problem?
Thank you very much,
Óscar

It could be issue with your over all profile..
Use - Over all profile SAPPM_G001
Overall prof: SAPPM_G001           PM: Ind.cap/tab/day/avail.lab./norm.schd
       Select.profile:                     SAPPM_S001      PM: Tab/work center/lab/
       Control profile:                    SAPPM_C004      PM: Capacity planning table individual
       Time prof:                          SAPPM_Z0T1      PM: Tab. short-term (1 month)
       Evaluation prof.:                   SAPPM_A001      PM: Plant maintenance
       Strategy prof.:                     SAPPM_T002      Lead time sched. backwards
       Capacity planning table (tab.form): SAPPM_R001      PM: Plant maintenance/Individual caps.
Note: Don't modify the Standard profile .

Capacity leveling, after Deallocate scheduling dates getting changed.

Dear Experts,
I have a issue in Capacity leveling using transaction CM25 - Online. I have created some production orders (using forwards/backwards scheduling) for overloading of WorkCentre's. When I dispatch orders it’s getting scheduled perfectly, but when I Deallocate same orders scheduled dates are getting changed.
Even after deallocation production orders schedule dates should be the same. Can you please help me in this regard?
Thanks in advance.
Prashanth

Hello Prashanth,
From SAP help Date Determination in Dispatching and Rescheduling - Capacity Leveling (PP-CRP-LVL) - SAP Library
The current dispatching data is cancelled. The status "dispatched" of the operation is reversed. The order is rescheduled.
If further operations exist for an order which has already been dispatched, the system automatically carries out midpoint scheduling. If no other dispatched operations exist, the system carries out lead time scheduling.
If order date is in past then it schedules to current date during de allocation if you do not have enter number of past days allowed to start date in scheduling parameters.
Br
KK

CM25 Capacity Leveling Functionality

Hello Guru,
i would like to know in CM25 transaction, is there "drag and drop" functionality will be able to do when dispatching orders? i mean from the Orders Pool, can i highlight one order there and drag it and drop it in the Order Dispatched part? is this possible already in CM25, since i tried it today got a message (Invalid Function) once i do it.
and also in CM25 how could i Freeze periods in the planning table?
Thanks

Dear,
Planning table: you can only dispatch operations within the planning period.
For that you need to change the time profile in CM25 Create a new overall profile with a time profile it with which the planning period is defined considerably larger than the evaluation period.
Also note you can define fixed periods via a user exit where only these areas should be planned, they are taken into account in the planning table. defined intervals are transferred in function module CY04_USER_EXIT_1
Regards,
R.Brahmanakar

Display the PO in the capacity leveling

Hi,
in the capacity leveling CM21 there is a table section.
In the table section I get Production order and planned order.
I just want to display the production order in this sections or in the oders pools.
How can I customize the system.
Thanks
Dede

Hi
Use CM25 and the selection profile you can select order.
Thanks
S.Murali

Capacity Leveling of Work Center

Hi all,
I have a problem with Capacity of Work center (WC).
I have a Internal Activity, and i assigned a WC for this Internal Activity. WC's capacity is 100H/day for 1 number of element.
Work of this WC is 250H, duration 5 days, number of element 1. Default capacity of this WC is distributed by Distribution Key define in Activity. . And they are divided equally between factory days in 5 day. That is capacity requirement is 50H/Day
So, i want to edit this WC's capacity following value:
Day 1: 100H/day
Day 2: 50H/day
day 3: 0H/day
day 4: 0H/day
day 5: 100H/day
How can i do it?? I try to use Dispatch Manually but i cant solve this problem.
Please help me for this case.
Thank all.
NLQ

Dear
Capacity leveling depends on some of the basic set up of Capacity Requirement Planning .You need to have proper CRP set up frist .
Couple of check points : -
Did you work centre is relevent for finitie scheduling in CR02-Capacity Header and wht is the over laod percentage for work centre ?
Did you have Capacity Requirement Related Set up like Over all profile , time profile , Startegy Profile -OPD0?
Did your Capacity Check -OPJK -Order Control at order level are active for availibilty Check 1 and 2 and assinged Over all Profile ?
Set up :
1.Please assing a operation control key like PP01 where Details Capacity Check and scheduling is active .
2.In CR02-Work centre -Capacity Header -You should have Follow check box marked
1.Releven for Finitie Scheduleing
2.Can be used for multiple Operation
3.
3.OPU3/OPU5 -Define Scheduling paramter -Mark Scheduling and Capcity Check for planned order or production Order
4.In SPRO -Shop Floor Control-Define Production Scheduling Profile -You need to matian the relevent Parameters like
1.Schedueling Automatically 2.Scheduling Log 3.Adjust Scheduling -Basic date , Depedent Requirement date 4.Scheduling Type -Backward etc .
These are all basic level set up beside CRP overall profile and other profile like strategy /time etc which may in place as you are analysing in CM01.
Please find below some of the useful CRP details : Refer this threads which are self explaintory :
http://help.sap.com/saphelp_47x200/helpdata/en/8a/a5a3154adc11d189740000e8322d00/frameset.htm
http://www.scribd.com/doc/17026521/SAP-ECC-60-PP-Capacity-Planning-httpsapdocsinfo
capacity planning
http://help.sap.com/printdocu/core/print46c/en/data/pdf/PPCRPSFC/PPCRP_SFC.pdf
Capacity Planning
capacity requirements planning
How to dispatch operation to do Capacity Leveling at Work Centre Level :
1.Frist Check the over load at work centre . Goto -CM07/CM05-give plant only -then hit the Stnadard view -You will find weekly or daily baiss load ( Requirement , Avaliable Capcity , Overlaod etc )
2.Check the week in which days you are tring to dipatch -if you selet the week check box and double clik it will show u all the dataiul load .Basde on the available capacity in other week-days u need to dipatch in CM22/CM31 or CM25/CM21
While dipatching in CM22/CM31-Select the Stragegy button on the top header -Mark Date entry when dispatching so that when you select the operation of any production order or planned order for certain work centre , it will pop with window having information of Date , Work Centre , Time .Onec you did this you will receive Scheduling log with certain information .
Hope this helps
regards
JH

Capacity Leveling Or Tabular Mettod

Hi Experts
Can any one tell me About the capacity leveling or tabular method And how we used it in our day to day scenario.
Rgds
Pankaj Agarwal

Hi Pankaj,
Normally in domestic projects very less usage has been seen for Capacity LVl. but by the Tcode CM25 you can use this form of levelling. CM25 is tabular capacity planning board where you can see the capacity requirements laid against the planned orders or work centers. After visualizing the plan you can better evaluate the capacity requirement. But it is mainly used to priortize the operations in std. practice.
There as the board you can select the plaaned order and via allcaote and Deallocate buttons you can take these operations. And finnaly you despatch it them to upper tab of the boards as yr firm capacity load.
Pls try it. It is a very good tool,
Rgds,
Umesh

Capacity Leveling error CM22

Hi,
   I get a problem when I do capacity leveling in CM22..I can perform the leveling in CM21 successfully while I get error msg in CM22..I search this forum but no answer for this similar question..
error msg:
   I try CM21 and it works..I didn't save the leveling result in CM21 and switch to CM22,but I get this error msg..
Capacity not availableMessage no. C7056
Diagnosis
The system could not find any remaining available capacity within the planning period.
things checked:
    I checked CM01 and I am sure there are enough capacity available ,the planning period in CM21 is also correct (2011/7/1 to 2012/3/31).I also check the strategy(finite schedule and planning direction checked)..

Hi,
Overall prof: SAPSFCG006           SFC: View work cntr/ind.cap. (tabular)
       Select.profile:                     SAPSFCS006      SFC: View center -> ind.cap. (tabular)
       Control profile:                    SAP___C001      Gen: Planning table (tabular form)
       Time prof:                          SAP___Z002      Gen: short-term (3 month)
       Evaluation prof.:                   SAP___A001      Gen: Standard evaluation profile
       Strategy prof.:                     SAP___T012      Gen: Finite sched.backw./alloc.& dispat.
       Capacity planning table (tab.form): SAPSFCR002      SFC: with indiv. capacities
           Layout ID                           SAPSFCLA04      SFC: Individual capacities (tabular)
           Ind. width
           FormulaRem.avail.capacity           2               Remaining av. cap. = Av. cap. - dispatch
           Dispatch time                       08:00:00
           Rqts to be displayed                3
I use CMCH to check the overall profile and I don't get any error msg..But I still get error msg"no available capacity" when do leveling in CM22/CM25...Pls help...thanks..
already fix it..it is due to the evaluation profile problem..
     still not fix..anyone can hep on it?thanks..
Edited by: Monst Yang on Nov 29, 2011 9:05 PM
Edited by: Monst Yang on Nov 30, 2011 8:00 PM

BAPI's for capacity Leveling (CM21)

Hello Friends,
Can anybody let me know the list of BAPI's available for the CM21 Transaction(CAPACITY LEVELING in PP Module).
Thanks
Naresh

Thanks Siddharth.
i got it

Capacity leveling procedure

Hi pp friends,
I have done all required settings and i can see periodrequirements in CM22 but don't know how to carryout lelling execution steps and how will it benefit in case of production order.
If possible send screen shots.
Thanks in advance

Hi,
Capacity levelling can be performed more easily from transaction CM21(graphical) rather than CM22(Tabular).
CM21 displays planning table with 4 separate parts. upper left part gives details of work center, lower left part gives corresponding planned order./production orders(you can restrict in selection screen only production orders/planned orders). lower right part gives Orders pool and load will be shown in red colour. Upper right part gives any changes mode to capaciry requirements.
Please go through Standard SAP documentation related to Capacity levelling for more details.
http://help.sap.com/saphelp_47x200/helpdata/en/49/e6f3340cdb8c44e10000009b38f844/frameset.htm
From this transaction you can see capacity Overlappings on each work centers clearly. By levelling the capacity of production orders from here will change the scheduling of the operations.
Regards,
Krishna Mohan

CM01/CM21 - Capacity Leveling Customization

Those who are still using R/3 for capacity leveling...
1. Have you had complaints from your users that these R/3 transaction aren't user-friendly at all?
2. Have they requested these to be customized?
3. Have you customized these transactions? To what extent?
The feel, look and config of these capacity transactions is very prehistoric (even before 4.0b)... nothing much has changed... then APO came in... the more leftout these transactions has become... users have resorted back to spreadsheets.. not good!
So folks who've been stuck in R/3 land and cannot stand these standard transactions, what have you done??? I'm interested to know what you did, what technologies (i.e. web dynpro) you've used and how your users embraced it.

Bryan,
I agree with you Cap. Levlling is not frinedly in R/3 or ECC.
However we use Capacity levelling for our collective order scheduling as it helps schedule parent & child orders as needed by planner.
For this I use cutomised profile ZSAPPSG001 copy of SAP standard SAPSFCG001 - SFC: View work center/capacity (2 graf.).The agreed capacity overall profile is then called in your prod. schduling profile tcode : OPKP.
You can customize user required Capacity levelling Overall profile in tcode : OPD0
From there you can select any subprofile that meets user needs or further customize subprofiles as needed.
Selection profile     SAPSFCS009 SFC: View Center -> Capacity (2 graf.) ( tcode : OPD1)
Control profile       SAP___C002 Gen: Planning table ( tcode : OPDE)
Time profile          SAPSFCZ002 SFC: graph. medium-term (3 months) ( tcode : OPD2)
Evaluation profile    SAP___A001 Gen: Standard evaluation profile ( tcode : OPD3)
Strategy prof.        SAP___T001 Finite scheduling forw./all functs.activ ( tcode : OPDB)
Period profile        SAP___P002 Gen: Daily period split ( tcode : OPD4)
Planning tab.profile ZSAPPSL001 SFC: only main caps. (2 graf.) ( tcode : OPG0)
List profile          SAPSFCI001 SFC: Production planning ( tcode : OPDH)
As you can see I just customised a few changes in my Planning tab.profile based on user requirement.
I am sure this gives you good insight to research this further & give your users some customised screen.
thanks,
Ram

Automatic dispatching in capacity levelling

HI All,
After MRP Run, I want to dispatch all orders in CM21 , Capacity levelling automatically with some predefined sequence.
Is it possible in std SAP ?
Amit

Hi
Yes, you can, the transaction CM40 can do that, please click the button 'Program documentation Shift+F1) to read the detail.
Please make sure that the field 'Dispatch' is ticked on in the section 'Action'.
Best Regards.
Leon.

Capacity Levelling - reg

Dear all,
1.I am having one work center say W.C-1(with capacity No:1 and duration-10hru2019s/day)
2.Now I have created two projects say PRJ-1 and PRJ-2.
3.For PRJ-1 I am planning one activity say Act-1 and for PRJ-2 one activity say Act-2.
4.Act-1 iam loading fully with W.C-1 on DAY-1
5.Act-2 also iam loading fully with W.C-1 on same DAY-1
6.Based on the above planning there is insufficient resource to execute Act-1 or Act-2.
7.Similarly in u2018nu2019 no of Projects for u2018nu2019 no. of activities same planning was done.
Now coming to capacity leveling, how can I do or system will do automatic capacity leveling in between multiple projects/activities.
pls help in this regard...
Regards,
Prakash.

Hi,
Check transactions CM32 / CM26 to do the capacity levelling for a project / WBSE.
Thanks & Regards
Sreekanth.P.S

Workcentre change in capacity levelling

Hi Guys,
In capacity levelling of planned orders i want to move planned orders from one workcentre to another workcentre , could any one explain me how to do this.
Thanks and regards
Thamizhchelvan G

Dear,
Yes you can dispatch planned orders in CM21, CM22, CM25, CM27, CM28
Usually the following std profiles are used.
SAPSFCG021 SFC: Standard overview in order view
SAPSFCG022 SFC: Standard overview in indiv.cap.view
Just need to select the order then click on Dispatch(press F5)
Or,
1. CM 25
2. Select multiple operations ( Edit> Select> objects that belong together
3. Press Shift button and simultaneously press mouse left/right button then drag and drop .
Please refer this link for capacity levelling,
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PPCRPLVL/PPCRP_LVL.pdf
Regards,
R.Brahmankar

Capacity Leveling(CM25 Transaction)

Similar Messages

Maybe you are looking for