Capacity load as real routing works

Hi:
I have anther question about SFC capacity leveling..why capacity load is not the same as production scheduling?
for example:PO require 52 hours for producing 100kg finish material and it automatically schedule the start date based on the finished date entered..(order start and finished date from 2012-1-2 to 2012-1-5)..when I use CM22 to do capacity leveling,the capacity load is in 2012-1-2..If I change the distribution rule in the evaluation profile to SAP0060(standard),then the capacity load will split evenly on these three days...How can the capacity load as routing ?like first day 24 hours,second day 24 hours,third day 4 hours..I want SAP to consume all the capacity in the first day and then the second instead of split evenly or put in the first day...How to make it ?thanks..
Overall profile for CM22 is SAPSFCG002 and evaluation profile for this profile is SAP___A001.

Hi,
Distribution rule is used when capacity requirements are displayed by period. If you go to Extras->Individual Capacities or Extras->Evaluation->... from the tabular view, you will see requirements are distributed.
The business requirement you stated in the blog is different than the one here in the thread. Formulating the dsitribution function as follows might better suit the requirement in the blog. This way capacity is load is distributed at the start of each half of the operation time.
0 50
50 100
Regards.

Similar Messages

Displaying the Capacity Load in a Work Center

Dear Sir,
i would like to Displaying the Capacity Load in a Work Center for the previous periods . that is for the last two months i would like to know the capacity load in my work centre. in mc01 capacity load are displayed for the future but not in the past
thanking you
arun kumar

Hi,
In CM01 transaction Menu click on Settings -> General;
In the data area Interval to be evaluated start field will be blank by default. you can enter in -value so that start date would go in past.
click on Time periods button . check Period of database selection From date. You can get details only from the date for the Overall profile attached.
if this has not solved your purpose, you have to change OverallProfile.
Planning -> Profiles -> Overall Profiles.
Select another Overall profile.
Regards,
Krishna Mohan

Capacity Load in a Work Center

Dear Sir,
i would like to Displaying the Capacity Load in a Work Center for the previous periods . that is for the last two months i would like to know the capacity load in my work centre. in mc01 capacity load are displayed for the future but not in the past
thanking you
arun kumar

Hi,
In CM01 transaction Menu click on Settings -> General;
In the data area Interval to be evaluated start field will be blank by default. you can enter in -value so that start date would go in past.
click on Time periods button . check Period of database selection From date. You can get details only from the date for the Overall profile attached.
if this has not solved your purpose, you have to change OverallProfile.
Planning -> Profiles -> Overall Profiles.
Select another Overall profile.
Regards,
Krishna Mohan

When try to connect my iPod touch 4th gen to my house Wifi it won't connect, it used to work fine but now it dosen't work, but it does say that the internet is available, but when I tap on it it just loads. all other devices work fine.

When try to connect my iPod touch 4th gen to my house Wifi it won't connect, it used to work fine but now it dosen't work, but it does say that the internet is available, but when I tap on it it just loads. all other devices work fine.

Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Oracle Applications 11i Load Balancing does not work with RAC one Node

Hi all,
Could you help me to resolve this issue.
Architecture environment is :
- One APPS tier node
- Two nodes Oracle Database Appliance (Primary node 1 holds INSTANCE_1 et Secondary node is configurured to holds INSTANCE_2), i.e RAC one Node.
- The primary node have instance_name SIGM_1 and the secondary node have instance_name SIGM_2, but in RAC one node, the secondary instance is not alive.
We convert our EBS 11i environment to RAC following note ID Using Oracle 11g Release 2 Real Application Clusters with Oracle E-Business Suite Release 11i [ID 823586.1].
When testing Database failover, Oracle Applications 11i load balancing does not work anymore.
The root cause is that, when the primary node of the Rac one node is down, the INSTANCE_NAME_1 is automaically relocating to the surviving node,.
During test failover, we imagine that when the primary node goes down, the secondary node start or relocate database with instance_name SIGM_2, and in that case the Oracle Applications load balancing works.
Currently, when the primary node goes down, the instance_name SIGM_1 is relocated on the secondary node, which cause failure of Oracle Applications Load Balancing.
Thank you for your advice.
Moussa

This is something I observed a long time ago for Safari (ie: around version 1). I'm not sure this is Safari, per se, but OpenSSL that is responsible for the behavior. I'm pretty sure Chrome does this and I've seen some Linux browsers do it.
What I have done at the last two companies I've worked for is recommend that our clients do not use SSL SessionID as the way of tracking sticky sessions on web servers, but instead using IP address. This works in nearly all cases and has few downsides. The other solution is to use some sort of session sharing on your web servers to mitigate the issue (which also means that your web servers aren't a point of failure for your users' sessions). (One of the products I supported had no session information stored on the web servers, so we could safely round-robin requests, the other product could be implemented with a Session State Server... but in most cases we just used IP address to load balance with). The other solution is to configure your load balancer to terminate the SSL tunnel. You get some other benefits from this, such as allowing your load balancer to reduce the number of actual connections to the web servers. I've seen many devices setup this way.
One thing to consider through this is that - due to the way internet standards work - this really can't be termed a bug on anyone's part. There is no guarantee in the SSL/TLS standards that a client will return the same SSL Session ID for each request and there is not requirement that subsequent requests will even use the same tunnel. Remember, HTTP is a stateless protocol. Each request is considered a new request by the web server and everything else is just trickery to try and get it to work the way you want. You can be annoyed at Safari's behavior, but it's been this way for over 5 years by my count, so I don't expect it to change.

Capacity Load...

Hi there,
I want to know the load on the capacity on daily basis which should include the Process/Production order against work will be done , the start & end time for which the capacity is running......
Is there any T-code thru which the report can be generated...
Also in the T-code CM55 how the change time profile works.......(the logic)
Thanks
Kaushik
Message was edited by:
Kaushik Choudhury

The capacity load is determined from a comparison of capacity requirements (for a specific capacity category) and the capacity available. This value is always specified as a percentage of the available capacity.
Try using the transactions CM01, CM02, CM03, CM04..........
There are many such transactions which gives you details of loading like over loaded, under loaded.
There are reports for Resource/ Work Center load wise, Prodcution order wise, Material wise.
Hope this helps you.

Rough cut Capacity load in Standard SOP

Hi there,
I have created some sales & production plan syncronous to sales......but when I try to see the capacity load thru View- > Capacity Situation - > Rough Cut planning- > Show
It is showing me that No Resource load exists ...... please guide me how can I see the load for the same
Regards
Kaushik

Hi,
Please maintain the settings as mentioned below.Then you can see the load.
Before you can carry out resource leveling in SOP, you must:
1.) Create a PP task list (a routing, a rate routing, or a rough-cut planning profile) for the material, product group, or characteristic values combination whose resources you want to plan.
2).Configure resources planning in Customizing for Sales & Operations Planning.
3).If you use routings or rate routings to do resource leveling, define the key figure to which the resources are tied. Do this in Customizing for Sales & Operations Planning under Set parameters for info structures and key figures.
4).Define the planning plant of any information structure whose plant is not uniquely identifiable (that is, either your information structure does not contain the characteristic "plant" or your rough-cut planning profile covers more than one plant). Do this in Customizing for Sales & Operations Planning under Set parameters for info structures and key figures.
5).Set the default SOP plant for Sales & Operations Planning. Do this in Customizing for Sales & Operations Planning under Set planning plant for SOP.
Thanks,
DV

Why won't time capsule router work?

Why won't the time capsule's wireless router work to allow internet access? Just got it, new 2 tb! Lost the excitement of it all now! Help! Connecting to new MacBook pros (13" & 2X15"s) as well as a Toshiba laptop. Followed all the directions and backed up just fine, but have not been able to browse web at all with this crap!

You do not have to load the airport utility.. a newer version is already included on the computer.
Just go to the applications / utility directory and start airport utility.

Trying to get a 3rd Party Router working with BT I...

Hi,
I'm trying to move away from the HHub5 on our FTTC BT Infinity connection (40Mb/s). Eventually I settled on a TP-Link WDR 3600 N600 - the flavour which is happy to talk to cable modems and take an OpenWRT install.
So far I've hooked up a BT OpenReach "white box" modem using the HHub's RJ11 lead, going from the DSL filter into the OpenReach modem's DSL socket. The modem's DSL LED lights up solid green - which I presume is good? The TP-Link router is up & running fine with OpenWRT installed, I can connect to it over WiFi and I've hooked up its WAN connection to the OpenReach modem's LAN1 socket (LAN2 is blanked out).
But whatever I put in the router's PPPoE settings I just can't get an internet connection to come up. So far I've used '[email protected] (as it's set on the HHub) and a few other suggestions from the forums including 'anything you like' @btinternet.com and @btbroadband.com - nothing seems to get the connection going.
Is there something I've missed or can anyone suggest a solution?
Many thanks,
Steve
Solved!
Go to Solution.

Sorry to answer my own question, but in case it helps anyone in the future:
I had to put my username in the username AND password fields - same details in both. I've not seen this written anywhere online, everyone says to leave the password field blank as it's unused.
So to recap - this is what got my TP-LINK WDR3600 (OpenWRT based) router working with Infinity: stick [email protected] in the PPPoE usernamd AND password fields.
Steve

Error "cannot load request real time data targets" for new cube in BI 7.

Hi All,
WE have recently upgarded our SCM system from 4.1 to SCM 7.0 which incorporated BI 7.0.
I am using BI 7.0 for first time and ahve the following issue:
I ceated a new infocube and data source of flat file and succesfully created transformation, and Data Transfer Process. Everything looked fine. I added flat file and checked preview and could see data. Now when I start job to load data in infocube the follwing error is shown "cannot load request real time data targets".
I checked cube type in setting in infcune is shows as Standard. When I doube clicked on error the following message showed up
You are trying to load data into a real-time InfoCube using a DTP.
This is only possible if the correct load settings have been defined for the InfoCube.
Procedure
In the object tree of the Data Warehousing Workbench, call Load Behavior of Real-Time InfoCube from the context menu of the InfoCube. Switch load behavior to Transactional InfoCube can be loaded; planning not allowed.
I did not understand what it is meant and how to set changes. Can someone advice and follow me through.
Thanks
KV

Hi Kverma,
Real-time InfoCubes can be filled with data using two different methods: using the transaction for entering planning data, and using BI staging, whereby planning data cannot be loaded simultaneously. With Real time cube you can select the method you want to use for update as
Real Time data Target can be loaded With Data; Planning not allowed &
Real Time data Target can be Planned; Data loading not allowed
You can change this behaviour by right clicking on cube and selecting Change real time load behaviour and select first option. You will be able to load the data then
Regards,
Kams

I just got my cable company to switch my wireless router to a wired one considering now I have the wireless airport device (the newest one) but now I can't get a wireless signal. The router works when directlyplugged in,the aiport wireless device is green

I just got my cable company to switch my wireless router to a wired one considering now I have the wireless airport device (the newest one) but now I can't get a wireless signal. The router works when directlyplugged in,the aiport wireless device is green. I've tried going through my new MacBook Pro settings and it the diagnostics check, it says network changes detected, I tell it that it "yes" does connect to a cable modem, it tells me to restart it, after I do it asks if there are any other devices hooked up ( firewall) and when I say no it tells me that it can't fix the problem.
Now I know that I probably have a new IP address because of the cable company switching the boxes but it was working fine with the other box, now there isn't a signal to be had on it!
Please anybody out there that can help!!!??

Any time you change networking hardware it is always a good idea to perform a complete power recycle with the new equipment. Check out the following AirPort User Tip. Please post back your results.

RFC Sender (XI 3.0, SP14) Load Balancing doesn't work

Hi all,
We're "desperately" trying to use the Load Balancing option of RFC Sender Adapter (XI 3.0, SP14). It doesn't work.
The Adapter can not register to the sender SAP server. But when we do not use the "Load Balancing" option, everything works well.
We did follow the XI guidelines step-by-step. All necessary configurations in XI and in SAP sender system (TA: SM59) are "properly" done and reviewed by different experts several times.
Do you have, by chance any running scenario using "Load Balancing" within a RFC Adapter? If yes, I would appreciate if you can share it with me.
Thanks a lot!
Regards,
Khaled

Hello Khaled,
the RFC sender adapter registers a program at the SAP Gateway. Load Balancing for the Sender Adapter means, that you have at least two J2EE server nodes within your XI installation. On all these server nodes the same RFC sender adapter is started and register the same program at the same gateway. The load balancing is then handled by the gateway. That means, that for the sender adapter the settings are the same, even if you use load balancing or not.
The settings are, e.g.
- SID=ABC
- hostname=abchost (central instance, message server)
- hostname=xyzhost (additional dialog instance of ABC)
- instance nr=00
application server (gateway): xi1host
application server service (gw-service): sapgw00
programm id: could be freely choosen
The Metadata Repository could be connected using load balancing. Here a user need to log on to the system.
The settings here must be:
Message-Server: abchost
Message-Server-Service: sapmsABC
System-ID: ABC
Logon-Group: e.g. PUBLIC; this logon group need to be created in system ABC using transaction SMLG
For the RFC-Receiver Adapter the same settings as for the Metadata could be used.
Keep in mind, that for the RFC Sender Adapter a RFC connection of type T must be created in transaction SM59 in system ABC.
Rgds.,
Andreas

Trying to get a WRT54GX2 wireless router working with a W...

Trying to get a WRT54GX2 wireless router working with a WPC54G wireless card. The laptop and desktop both will access the Internet and work when hardwired through the router's Ethernet ports. When trying to access wireless, the Laptop shows to be connected to the router and also to Internet, but Internet Explorer can not access any websites. Suggestions? Thanks.

what ip address does the laptop get ?? ensure that the laptop is not set for a static ip add....and it gets an ip add from the router ..

Why will Adobe Acrobat not load PDF from my work website, but will load on other computers?

Why will Adobe Acrobat not load PDF from my work website, but will load on other computers? I have to log in to a website to get our orders, and we thought it was the website at first, but have since realized it is just my computer with this issue. I have tried uninstalling and reinstalling the software and still it does not work.

You ask "why", but don't provide any information...
What is your operating system?
What is your web browser?
Are you asking about Adobe Reader or Acrobat?
What is your Reader / Acrobat version?
What exactly means "will not load"?

When I attempt to open iphoto, I get the loading icon in the working space/picture area. If I try to reinstall ilife '11, will I lose any pictures? Where, on the hard drive, are all my pictures actually stored?

When I attempt to open iphoto, I get the loading icon in the working space/picture area. If I try to reinstall ilife '11, will I lose any pictures? Where, on the hard drive, are all my pictures actually stored?

You won't lose anything because you have a back up, right?
Most Simple Back Up
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex:
Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically. Examples of such apps: Chronosync or DejaVu . But are many others. Search on MacUpdate
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Capacity load as real routing works

Similar Messages

Maybe you are looking for