Capacity Planer Group --- Maintenance work center

Hi,
I have a query
1. like do we have to create capacity planner groups same as the planner groups in equipment master data....Do they have any link??
2. What would be the start time and end time in maintenance work center, for 24 hrs open manufacturing industry with 3 shifts???
thanks
DM

Hello Deepak,
There is no relation between capacity planner grp & Maintenance planner group...These are 2 different things..
Now the work centers can be defined for the technicians if HR module is not implemented...
To perform the capacity planning for the technicians, there daily working hrs must be maintained in the system..Though the maintenance is working for 24 hrs,Single technician cannot work for entire 24 hrs..
Hope this will help..
Thanks

Similar Messages

Varying Maintenance Work Center Capacity by Days of the Week

I had submiited a question a month or so ago about varying the capacity of a maintenance work center depending on the day of the week. I got an answer and it worked.
We've set up another work center (in staging) for the same scenario (the work center is half staffed on Fridays). Monday through Thursday the capacity is 36 hours, Friday the capacity is 18 hours, the validity from date is 04/05/2010. When we use CM34 to do some scheduling though, the capacity shown is 40 hours a day, Monday through Friday which is what the capacity was set up for prior to the validity from date. It's also the same capacity as shown in the 'Standard Available Capacity' section.
I looked back at the work center I had modified previously and it's showing the same thing. It's like it's ignoring the validity dates.
Any ideas?
David Macindoe

David,
I know for sure that this is reflected in the standard profile for Capacity Availability check as part of release of the order (SAPSFCG013). The Availability for the week does show the capacity for the interval dates of the week and not the standard available capacity.
I haven't checked this on CM24 and if the standard profiles don't reflect the change then the profile probably needs to be changed.I need to look into it to make sure. In the meantime if you aren't able to resolve the same, i would suggest to raise a note and see where that leads you.
Regards
Narasimhan

Maintenance Work Center : Capacity Planning CM01

Hello Gurus,
We are using T-code CM01 to determine the Requirements / RemAvailCap of the Maintenance Work Orders in a given Maintenance Work Center.
After executing CM01, the detail capacity list contains Not Scheduled orders( CRTD )and capacity of these not Released orders also taking into consider.
How to restrict CM01 Order selection based on the work order System status or User status ?
I found below discussions on SCN but couldn't get precise answere.
Plant Maintenance: Capacity planning CM01/ CM07
Configuring profiles in CAPACITY PLANNING (CM07)
Please help.
Thanks in Advance
Ashok M

There are a few ways:
Create a new status profile via BS42 and assign the REL status only (see image 1). Then in the CM01 display screen, use menu path: Planning->Selection->Order and enter the status profile created above (see image 2)
Create a new selection combination via OAP0. In the CM01 display screen, use menu path: Planning->Selection->Combination and enter the selection combination created above (see image 3)
The above settings can then be defaulted via the various capacity planning profiles.

Long-term planning: planning details of work center capacity

Hi,
we need to know what is the effect on planned production orders (generated by MPS, transaction MD40) of the flag “long-term planning” in planning details of work center capacity (table name: RC68K; field name: KAPLPL). We made a test analyzing planned orders scheduling details in Stock requirements list (MD04) and in the Planning table (CM21) in both cases: with "long-term planning" flag set and without this flag for the same work center.
The schedule of planned production order on that work center is the same in the two instance.
Could you suggest us something?
Thank you.

Hi Rudy,
Purpose for carrying out Long Term Planning to simulate impact of Future Demand Program on
u2022 Material Requirements
u2022 Capacity Requirements
u2022 Material Cost budgeting (activity by Accounts dept.)
T.Codes used -
u2022 Demand MD61, MD62, MD63
u2022 Scenario Creation MS31, MS32, MS33
u2022 LTP Variant Creation & Execution MSBT, SM37
u2022 LTP statistics Evaluation SM37, MS04
u2022 Data Set Up MS70, MSB&
u2022 Evaluation based on Set up data MCB), MCEA, MCEB, MCEC
u2022 Capacity Evaluation CM38
To Summarize -
u2022 In long-term planning, production plans for future demand programs are simulated using MRP runs with reference to the planning scenarios.
u2022 The parameters for the simulation in the simulation planning area are defined in the scenario.
u2022 The Evaluation of LTP Statistics enables identification of Material for which LTP processing was terminated.
u2022 The Data set for purchasing & Inventory Control enables reports for demand analysis
u2022 LTP run with setting for u201CLead time scheduling and capacity planningu201D enables simulation of capacity situation/overload on work centers.
Hope it is helpful to you.
Srini

Displaying the Capacity Load in a Work Center

Dear Sir,
i would like to Displaying the Capacity Load in a Work Center for the previous periods . that is for the last two months i would like to know the capacity load in my work centre. in mc01 capacity load are displayed for the future but not in the past
thanking you
arun kumar

Hi,
In CM01 transaction Menu click on Settings -> General;
In the data area Interval to be evaluated start field will be blank by default. you can enter in -value so that start date would go in past.
click on Time periods button . check Period of database selection From date. You can get details only from the date for the Overall profile attached.
if this has not solved your purpose, you have to change OverallProfile.
Planning -> Profiles -> Overall Profiles.
Select another Overall profile.
Regards,
Krishna Mohan

Capacity Load in a Work Center

Dear Sir,
i would like to Displaying the Capacity Load in a Work Center for the previous periods . that is for the last two months i would like to know the capacity load in my work centre. in mc01 capacity load are displayed for the future but not in the past
thanking you
arun kumar

Hi,
In CM01 transaction Menu click on Settings -> General;
In the data area Interval to be evaluated start field will be blank by default. you can enter in -value so that start date would go in past.
click on Time periods button . check Period of database selection From date. You can get details only from the date for the Overall profile attached.
if this has not solved your purpose, you have to change OverallProfile.
Planning -> Profiles -> Overall Profiles.
Select another Overall profile.
Regards,
Krishna Mohan

To find 'Maintenance Work Center' for Equipment (without Production order)

Hi,
I have a Report for - 'Equipment BOM' - IB03.
Problem: How to find the 'Maintenance work Center ' For Equipment ? (IE03--> Organization > Responsibility> Main. W.Cntr)
[ Note: For Client --> It's not necessary that each Equipment has Production Order, Few Equipments are taken only for Repair purpose, Equipment is there in table - EQUI,
So - Not possible to fetch from AUFK, HIKO or any other order tables. ]

I have a Report for - 'Equipment BOM' - IB03.
Problem: How to find the 'Maintenance work Center ' For Equipment ? (IE03--> Organization > Responsibility> Main. W.Cntr)
[ Note: For Client --> It's not necessary that each Equipment has Production Order, Few Equipments are taken only for Repair purpose, Equipment is there in table - EQUI,
So - Not possible to fetch from AUFK, HIKO or any other order tables. ]
EQUZ-GEWRK has the main work center. Pass the equipment number and valid-to date to get the main work center.
Cheers
Sujay

Assignment of activity group to work center

Hi,
We want to assign activity type to work center more than six,
how we can assign activity type more than six to work center?
i have created activity type group in klh1,
in activity group i have assigned activity type more than six,
How we can assign activity type group in work center?
Regards
Gajjen

HI
It is not possible to assign more tha six actvities to a cost center as per SVK defined in the WC.
Check with the business process field for assign with your CO guy in thw WC.
A business procedure within an enterprise that uses resources and can involve activities from a number of different cost centers in a controlling area.
When executing a business process, activities can be utilized for several cost centers of a controlling area.
Check and revert
Regards
Anupam Sharma

BAPI for reading capacity of a workplace/work center?

Hi,
I'm looking for a BAPI/RFC using SAP MII to read the capacity of a workplace/work center in a given time period (eg. one or more days/weeks/...). I would like to use the import parameters plant ( WERKS ), date from, date to, workplace/work center (eg. CRHD-ARBPL ) and capacity category (eg. KAKO-KAPAR ). As output I would like to get a list of (planed/used) capacities as the working time for the given time period at the specified workplace/work center.
In theory the BAPI CBP_EXC_WC_CAPACITY_REQUEST nearly does what I want. The only drawback is, that it outputs the "wrong" time.
Let me give an example: The work center uses at a given day a capacity from 6 to 22 clock, including one hour break. This gives us a working time of 15 hours for this workplace and day. And "15h" is the time I need. But as there are working 5 worker at this work center the BAPI CBP_EXC_WC_CAPACITY_REQUEST returns 75 hours (which is 5 * 15). But the result "75" is useless for me as long as I don't additonal get the number of workers.
I've searched in our SAP system and in this forum, but wasn't able to find another BAPI that gives me the correct time. As an alternative I would need another BAPI to get me the number of workers for a workplace/work center at a given time. But I also was out of luck finding one.
Looking out for help,
Simon

Thanks for your fast reply!
I have looked to both functions before. Beside that they are both not remote enabled (which is not such a big problem as I could copy them or build a custom BAPI around them) I'm not quite sure how they could solve my problem.
If I got it right, I would first use CR_CAPACITIES_OF_WORKCENTER to get the KAPID and using it as input for CLOI_WC_CAPACITY_READ. But I have problems to understand the output of CLOI_WC_CAPACITY_READ. The data type of the capacity is a float ( FLTP ) and the number seems to be to big, eg. 9.800000000000000E+01= 98h for one day.
Could you try to explain your solution once again?
Thanks,
Simon

Maintenance Work Center, user status, system s into notification print out.

I want to copy Maintenance Work Center(GEWRK), active user status and active system status to notification print out. I am not able to search from which table this field is coming. Can any body tell me the name of table ?
Regards,
VM
Edited by: V M on Oct 5, 2008 4:03 PM

VM,
It may not work with print programs, but try putting the following code in your ABAP program:
* get notification statuses
data: lt_jest      type standard table of jest.
    call function 'STATUS_READ_MULTI'
      exporting
        all_in_buffer = 'X'
      importing
        status         = lt_jest.
If that fails, then try this:
data: lt_jsto_pre type table of jsto_pre with header line.
data: lt_jest      type standard table of jest.
call function 'STATUS_READ_MULTI'
       exporting
            client      = sy-mandt
            only_active = 'X'
       tables
            objnr_tab   = lt_jsto_pre
            status      = lt_jest.

What will happen if a maitain both standard available capacity and grouping key ( shift definition and shift sequence) in the capacity header of a work center?

Hi all,
Im little confused with the capacity header in work center. In the capacity header there is one place to give start time, end time, length of break and number of individual capacity. And in grouping key i can define the shift and shift sequence. So if im maintaining both of these ( standard avilable capacity and grouping key), which will be considered to calaculate avilable capacity?

Hi
If you are running three shifts ,please maintain the data as given belwo
start :00:00:00
End:23:59:59
Break :03:00:00 ( 1 Hour per shift so 3 hrs for 3 shifts)
No.of individual capacity :1
System will understand that it is round the clock operation with total three hour brak and you will get 21 hour per capacity
Hope this helps
regards
Prakash

Pooled Capacity Not updating in Work center

Hi All, I want to update pooled capacity in Work center. But when i delete the existing capacity it is giving error that " Capacity still being used". Can any one suggest,how to tackle this problem? I want to give solution to Client. Thanks in Advance..!

HI,
Capacity Utilisation rate = Actual Capacity / Theoritical Capacity
Theoritical Capacity= Shift period * No. of machines available
= 8 hrs * 2 = 16 hrs
Actual Capacity value depends on how the company decides it. Say if the break 30 mins has to be considered, then the actual capacity will be 15 hrs for 2 capacities and hence,
Capacity Utilisation rate = 15 / 16 = 93.8%
So, decide the utilisation rate based on the Company's requiremnt.
Hope the above gives you an idea.
-Thaila Shree

Different activity type for different capacity category in a work center

Hello,
Multiple capacity categories can be created in a work center like
Engineer
Sr. Engineer
Architect
Rates for all of them will be different (obviously) , however we can only have 1 activity type as default in a work center . We intend to 'HR assignment' corresponding to each capacity category . how can we have multiple activity type for different capacities (Engineer , architect etc).
With regards,
Mrinal

Hi Paulo,
thanks for your quick reply.
Requirement is to assign all persons (Engineer, architect ) to 1 work center and to 1 activity , but to default different activity type (corresponding to capacity category) in worklist of time sheet .
With regards,
Mrinal

Plant Maintenance, work center & component.

Hi, I have some question as below:-
company code: 1000
Plant A: 1100
Plant B:1200
Component storage location under 1100
Q1: work center for plant B is under 1200, so if work center need the component for maintenance job, then they need do the STO to transfer component from plant 1100 to 1200?
Q2: work center for plant B is under 1100, so they NOT need do the STO to transfer component to do the job at 1200?

Hello Dear,
Can you please tell which is the Maintenance Plant,
if the maintenance Plant is different from the main Plant then you need to do the STO for the Main Plant(B),
if you have assigned both the Maintenance plants to the main plant then no need for the STO.
Hope it helps
Regards,
Yawar Khan

Plant Maintenance -- Work Center Tables

Hi,
I want to have a list of PM tables, where Work center data is stored.
Thnx,
Shivaa.

http://www.sap-img.com/plant/transparent-table-relate-with-pm-module.htm
http://www.erpgenie.com/abap/tables_pm.htm

Capacity Planer Group --- Maintenance work center

Similar Messages

Maybe you are looking for