Capacity Planning for all Sales Order Items

Sir,
A Sales Order have 4 different line items & need to produce on single work center.
In schedule line of sales order requirement dates are given priority wise.
After running the MRP I have observed that for all schedule lines, all planned ordered are starting on same date & time on the given capacity.
I need to level it manually.
Here I have few Question.
1) Can Capacities are Scheduled as per priority given in SO automatically.
2) Can revised availability dates will be reflected in SO.
3) Which reports will be useful for understanding consolidated availability date of material for given sales order/s.
Regards

Dear ,
To answer the question for Capacity requirement planning on sales order I would say that MRP does  only materials planning based on demand and reciept  but never does Capacity Requirement Plannig .MRP generates Planned Order  and susequently , production order can be genreted and farther you can carry out capacity requirement planning based on the work cente available capacity , requirement and load for those MTO orders .
But there are SAP business suit like APO-SNP APO PPDS which carriy our details scheduleing and caapcity check based on the demand situation : Sales Order ,Independent Order  and does capcaity vaialbality chek for those demands while planning .
Now , here is the answer of your question :
1) Can Capacities are Scheduled as per priority given in SO automatically. : Not possible  through  SAP MRP but in APO-PPDS, APO-SNP-CTM , Herustic model .
2) Can revised availability dates will be reflected in SO. : It can be reflected as per the ATP chekc , Replishmenet Lead  Time and re-scheduling horizon maintained in OPPQ-Carry all overall plant parametres.
3) Which reports will be useful for understanding consolidated availability date of material for given sales order/s. : You can check through MD04/MD05 or in sales order -Availaibility check -Schedule Line -Availaibility date .
Hope your are clear about the requirememt .
Regards
JH
Edited by: Jiaul Haque on Jun 5, 2010 1:59 PM
Edited by: Jiaul Haque on Jun 5, 2010 1:59 PM

Similar Messages

  • Select aentries from table Z-Table for all sales order line items

    Hi friends,
    can anyone please explain me about the "Select entries from table Z-Table for all sales order line items".
    Thanks.

    Moderator message - Welcome to SCN.
    But
    Moderator message - Please search before asking. Press F1 on SELECT and look at the FOR ALL ENTRIES addition. - post locked             
    Rob

  • How to set "Configuration Variant" for a sales order item using function

    Hello All,
    I use function module 'SD_SALES_DOCU_MAINTAIN'  to create Customer Indep. Requirements but how to set "Configuration Variant" for a sales order item.
    Is their any idea or sample code?

    Hi Zhijun zhang,
    <u>http://help.sap.com/saphelp_nw2004s/helpdata/en/c0/98038ce58611d194cc00a0c94260a5/content.htm</u>
    <u>http://help.sap.com/saphelp_nw04/helpdata/en/c0/980374e58611d194cc00a0c94260a5/content.htm</u>
    A variant is simply an SAP report where the parameters for running the report have been set by the user and then saved with unique name. This allows future retrieval and execution of the report faster without reentering the parameters. As a convention the variant name should start with with the digits 50 so searchs for LHU variants is easier and quicker.
    The first link will guide you by screen shot wise.
    Award points if it adds information.
    Thanks
    Mohan

  • Activites due for shipping :sales order items

    Hi All,
    while i was using T CODE VL10C (Activites due for shipping :sales order items) i found the field NAME1 does not retrive the names of the coustomers can any body told me why this problem happened and how can i solve it.
    thanks 4 all.

    Hello
    In the transaction code VL10c , go to the last tab "User Role'
    double click the role , you would get a list of all the profiles
    go to change mode
    click the check box with name of ship to party
    this would populate the name 1 field
    Hope this helps
    Thanks
    akasha

  • Net price calculation for a sales order item

    I am sending the input to BAPI_SALESORDER_CREATEFROMDAT2 for a sales order item with a customer expected price and the material number (pricing group is not being filled in). When the sales order is generated, I see that net price is different from the expected price and the price is being obtained based on the material number that is being given as input. I want to know at what point of code the net price is calculated?  I tried to debug and see but with the numerous userexits and BADIs in the calls I am not successful yet. Any input is appreciated.

    It goes through different pricing routines but the start will be in function module 'PRICING'. Put a break point and run your BAPI or go to tcode VOK0 - find the condition and routines.
    Pricing will be calculated based on customer and material.
    Previous answer is pretty good, you need to fill item conditions in table in bapi also header conditions if you are using header pricing.
    Anyways, first of all create your order from VA01 and see the netprice in conditions. again, the pricing will also depends upon region of customer and material.

  • MRP run for multiple sales order items

    Dear All !
    In our business, in one sales order there are at least 40 -90 items. for MRP execution we have to do it line item by line item. Can it be done colletively for the sales order for all items.
    please help.

    Govinder,
    There is no Sales order header level MRP, so the only option left is to run MD01 or MDBT background MRP.
    Regards,
    Prasobh

  • Idoc segment for updating Sales order item dates

    Hi All,
    I would ike to update the sales order item dates (loading date, Goods Issuance date etc) from an IDOC.
    please let me know the Idoc segment and fields that need to be filled in?
    Thanks in advance.
    Regards,
    Zeeshan.

    Hi,
    Here are some details of the segments in the idocs -
    SEGNAM Segment Name E1EDL20
    VBELN Sales and Distribution Documen 180001539
    SEGNAM Segment Name E1EDL18
    QUALF IDOC Qualifier: Control (Deliv PIC : Picking with flow records (inbound)
    SEGNAM Segment Name E1EDL18
    QUALF IDOC Qualifier: Control (Deliv PGI : Post delivery goods issue (inbound)
    SEGNAM Segment Name E1EDT13
    QUALF IDOC Qualifier: Date (Delivery 010 : Picking
    NTANF Constraint for activity start 20090808
    ISDD Actual start: Execution (date) 20090808
    SEGNAM Segment Name E1EDL24
    POSNR Item number of the SD document 10
    MATNR Material Number 1112
    WERKS Plant SG01
    KDMAT Material belonging to the cust 1112
    LFIMG Actual quantity delivered (in 55
    VRKME Sales unit EA
    POSEX External item number 10
    ORMNG Original Quantity of Delivery 55
    SEGNAM Segment Name E1EDL41
    QUALI Qualifier for Reference Data o 001 : Purchase order data of customer
    BSTNR Customer purchase order number 4500004668
    BSTDT Customer purchase order date 10
    POSEX Item Number of the Underlying 10
    SEGNAM Segment Name E1EDL37
    Regards,
    Shamma

  • RR Reversal for deleted sales order items

    The revenue has been recognised for a sales order. but somehow user deleted this sales order. it seems there was some problem in the deletion. i can still see the sales order in VBAP but not in VBAK.
    Is there a way to reverse the RR for this sales order? The sales order appears as open item in FBL3n.

    The revenue has been recognised for a sales order. but somehow user deleted this sales order. it seems there was some problem in the deletion. i can still see the sales order in VBAP but not in VBAK.
    Is there a way to reverse the RR for this sales order? The sales order appears as open item in FBL3n.

  • MRP not considering open purchase orders when planning for open sales order

    Dear Experts,
        1.I have open sales orders as well as planned Independent requirements for finished goods for the current month. Also I have open puchase orders for raw materials which is part of the Bill of material of the finished goods for the current month.
    Please what do i need to do to make MRP consider my open purchase orders when the system is planning for the open sales orders.
    2 what tcode can I use to delete all purchase reuisitions in the sytem

    There was no response to these questions so i had to close it to make space for another

  • Table names for blocked sales order item in GTS system

    Hi all.
    I want to get the blocked sales order line item, reason for blocking, product number & product description from GTS system, based on the sales order number from ECC system.
    I am thinking to create and RFC FM in GTS system and call that in ECC.
    Could you please tell me the table name in GTS system where I can see above mentioned data?
    Regards,
    Prajwala K.

    Hi Manish,
    Thanks for the valuable reply
    I have checked the table which you have mentioned in your earlier replay, am not able to see product number, reason for blocking  etc.
    My requirement is to create a trade report in ECC. I will be fetching data like sales order, ship to party, sold to party from system ECC using VBAK, VBAP & related tables.
    Now I have to get that blocked sales order line item, reason for blocking, product number & product description from GTS system.  My idea is to pass the sales order number from ECC to GTS using RFC and get the data.
    Issue is am not sure about the tables, I want know which tables contains the data from blocked sales order in GTS system and how to connect those tables.
    Regards,
    Prajwala

  • Capacity Plan for Partially Confirmed Order

    Hi Guys
    Can any one please guide me on Capacity Planning (CM29) how to:
    1. Plan to plan a partial order. Or in other terms: how to plan a part order in wk1 and rest in wk2
    2. If the process order is partially confirmed, then how should supervisor re-schedule it again for later date!
    3. Ideally what should be followed:
      a. Schedule the Planned Order on CM29 and then Convert them to Process Order , OR
      b. Convert the Planned Order and then Schedule the Process Order on the CM29 screen
    Thanks in advance
    -Rahul

    Hi Mehdi,
    Once order status is PCNF you cannot create lot with inspection type as 03. You need to reverse all the confirmations/Goods issue and activate 03 inspection type in material master, maintain MIC related data in routing and do Read Master data. Then system will create inspection lot.
    For 03 inspection type manually inspection lot cannot be created. Once order is released inspection lot will be automatically created by system.
    Thanks & Regards,
    Ramagiri

  • Can we take standard report for all sales orders based on the condition typ

    Hi all,
    Based on the condition type, we need to take a report for sales orders on the particular date.
    Thanks and Regards.....VM

    Hello again.
    Searching for a solution, I found a Logical Database for sales orders, that have all the information that you need.
    Using like reference the post of Bhagavatula, in the same transaction SQVI you can use, instead of the suggested join, you can select a logical database called VAV in Data source.
    This logical database links the tables, VBAK, VBAP, VBUK and KONV that is the central point of the question.
    You can list the information of logical database using the transaction SLDB.
    In 'Logical Database' inform VAV.
    Press F8 to list all the fields.
    More information about logical database in:
    Link: [SAP Logical Database|http://help.sap.com/saphelp_46C/helpdata/EN/9f/db9b5e35c111d1829f0000e829fbfe/content.htm]

  • MTO Plan for valuated sales order

    Hi
    i am planning for cut over activities data for fininsed stock
    for sales order we got 500 finshed product how can proceed further for it.
    thanks
    kareem

    I have updated stock for testing purpose through 561 move
    and updated price through mr21
    and issued to sales order through migo 413 e
    but confuse how i will get values during billing and actual setttlelemt of sales order.
    please if i am wrong.
    thanks
    kareem

  • FMS to Find total number of Quantity for all Sales Orders

    Hi Experts,
    I am trying to get the total number of quantities for the current document. Kindly help me out how to find it out for the current document.
    Currently I am giving the document no. to the query by modifying the query every time before executing it.  but how can i do this without giving the document numbers and executing the query directly.
    Kindly help ...
    Thanks and regards,
    Amit.

    Hi,
    Please follow below steps to get total quantity.
    1. Run below query first in query generator
    SELECT sum(T1.[Quantity]) FROM ORDR T0  INNER JOIN RDR1 T1 ON T0.DocEntry = T1.DocEntry WHERE t0.docnum = $[ORDR.docnum]
    2. After execute, save it under query manager with required name
    3. Open sales order and run saved query
    4. Total quantity will be displayed in query result.
    refer below screen shot:
    Thanks & Regards,
    Nagarajan

  • MTO - how to prevent a second planned order for a sales order?

    Dear friends,
    We are working on Make to Order process (Planning strategy group 20).
    No Production/process order is used
    Shop floor uses a different system --> details from planned order is passed to the shop floor system; and finished product is delivered/posted into SAP Sales order stock - through interfaces
    No QM in place
    A typical day-to-day scenario –
    Sales order Qty = 100
    MRP Run à Planned order qty = 100
    Raw materials posted to ‘Sales order stock’
    Planned order is firmed
    For example if Produced qty = 90
    sales order stock of the finished product = 90
    Balance 10 cannot be produced / delivered for various reasons
    Planner posts the raw material to cost center / rejections / own stock etc., and ensures that the ‘sales order stock’ of the raw materials are zero.
    Planner deletes the planned order
    Next MRP run triggers a new planned order for the balance qty 10
    Now, the requirement is to prevent the new planned order getting generated for the balance quantity, during the subsequent MRP run (despite the shortage in the Sales order stock of the finished product).
    The following options have been evaluated –
    Once the final good receipt is done & before deleting the planned order,
    o       Change the Sales order quantity to match the total produced quantity
    o       (or) Change the schedule line category for the Sales order item from CP to CN
    §         Since the Sales order and planned order are handled by different teams, considering the frequency of correspondence/coordination needed between these two teams to get the sales order items corrected, this idea is not accepted
    §         Additional authorization for the planner to change the sales order item is not acceptable
    Include Under delivery / Unlimited tolerances
    o       at the customer (master) level
    o       (or) Sales order level…
    §         In this case, System seems to consider the tolerances only when the  delivery for the Sales order is posted; and not when the sales order stock is received within the tolerance limits;
    §         Considering the time gap between the GR and Delivery of the finished product, this option is not accepted
    Kindly suggest the other options / settings / processes, to meet this requirement
    Thank you for your time and efforts.
    With Best Regards,
    Senthil

    Closing this thread
    Thanks
    Senthil

Maybe you are looking for