Capacity planning tables.

Hello everyone,
I have a requirement to extract Capacity Planning data from ECC into BW. I see that Capacity Planning report can be generated from CJ2B transaction. I also found that the structure for this is CYSTANDA. For extraction purposes I wanted to find out which tables are used to get this information and how CYSTANDA structure is populated.
Can someone please enlighten me?
Thanks in advance.

Welcome to SCN!
You can determine this very easily yourself by running a performance trace (transaction ST05) against the transaction you are interested in (CJ2B).
Rob

Similar Messages

Operations are not getting despatched in capacity planning table

Hi Experts,
I am using capacity planning table (Graphical) to level the capacities and sequence the process orders. The start date of my orders are very well in future and sufficient capacities also is available in resources. But when I go to CM25 and select one order and click on despatch, system is not despatching it. This is the case for almost all the overall profiles.
The surprising factor is, this function was working fine earlier without any issues. I havent done any changes in configs which will affect capacity planning.
What can be the reason for this? Any thoughts please?.
One more thing. Is there any option to avoid the capacity planning step if Iam using R/3 and manage it by some other way?
Appreciate your earlier reply
Thanks & Regards
Prathib

Most likely you didnt define the rowsource key properly. Please look under <install>/errors folder for any file there.
Also, please read the documentation. There is information there about how to troubleshoot a loading problem. Please always read the documentation and we would appreciate feedback on the documentation.
http://download.oracle.com/docs/cd/E17236_01/epm.1112/iop_user_guide/frameset.htm?launch.html

Error message in capacity planning table

Hi,
I am using REM planning table.I enter the planning table by giving the selection criteria of Plant and production line.
System is giving following error message,
the error message and dignosis of the error message is given here.
'No prod. dates for material MTI_FERT011, version 0001, production line 2279'
Message no. REMPT315
Diagnosis
The planned order has no production dates for the combination of material, production version and production line you specified.
This may be as a result of the following, for example:
The planned order was scheduled but not using the production line you selected. (The production line is determined by the production version you entered in a planned order.)
Procedure
One possibility of finding out what is causing the problem is:
To access the planned order from the detailed dialog box in the table via "Change" and reschedule the planned order. Check the scheduling log by choosing "Goto --> Scheduling log". More information is displayed in the log's warning or error messages.
But which master data to be corrected is not known.
Experts please guide me.
Regards,
Ravindra

Hello,
I had the same error while working with the REM planning table, despite the consistency of the data.
Another cause that can lead to the error message REMPT315 is that in the production version detailed screen, "Planning data" table you have entered the routing next to rate-based planning. You must enter the routing (number of the group and the group counter) on the line detailed planning.
After that, choose check again and try to introduce new quantities in the planning table. It worked for me!
Irina

Any std report in Capacity Planning showing only dispatched orders/opns ?

Hi CRP gurus:
Does SAP has any standard report/transaction in Capacity Planning that shows (or has a selection for showing) only "dispatched" orders/opns ?
- Chetan

Chetan,
Use transaction COOIS. In this choose Operations, System status as DSPT at operation level, enter plant and execute. You will get only orders and the operations which are dispatched in this plant.
You can navigate to the capacity planning table from the selected records through order change.
Hope this is ok with you,...reward points..and close.
Regards
Ram

Importance of Planning Table

hi! Gurus,
can you please expalin me the importance of Planning Table (MF50).
i can see the capacity data & material data, with a barchart (Capacity Planning Table). but, wht information i can get from that? how it is useful for planning? because, i felt MD04 can give better information than a planning table.
and moreover i am unable to interpret the barchart.....it is displaying all production orders in tat week or month. but, whats the use (who needs tat information & for what)?
i think i clearly explaind my agony....please help me
with regards,
SAP Friend

In MF50,
You will get many options,
Mainly you will get the requirement and after running MRP, you will get receipt element(planned orders), This planned orders can be scheduled alone the axis by distibuting the order qty considering the capcity so that you can see that wc is over loadded.
From here you can create production order or planned order directly.
See the link below
http://help.sap.com/saphelp_47x200/helpdata/en/5f/1faba54aee11d189740000e8322d00/frameset.htm

Planning Table MF50

Hello experts,
Can some one please explain the purpose of the planning table MF50 and how to use it for capacity levelling. I am in a REM environmnt.
Thanks
Raman

HI
1)In Repetitive Manufacturing, the master plan is represented by the planning table. The planning table is a tool for operative planning and is used to plan the production quantities:
2) In a repetitive manufacturing environment, planning and control is usually carried out in a period and quantity basis. The layout of the planning table has been designed to support this requirement and is also based on periods to provide a very clear, easy-to-interpret overview of materials and production lines.
3)The planning table is the planneru2019s/MRP controlleru2019s most important tool for planning the production quantities. At a glance the planner can check production quantities, monitor the available capacity of the production lines and check up on the availability situation of the products produced on each line.
4)You can directly enter and change production quantities in the planning table. You can assign u2018non-assignedu2019 production quantities to the production lines or you can reassign production quantities to alternative production lines.
5) You create the production quantities or assign them to the production line in the planning table.
6 )You can also use the planning table with capacity planning. Here, planning is based on lead time scheduling. The basis for lead time scheduling is the routing. You can access the capacity planning table directly from the REM planning table.
Regards
Anupam Sharma

CM27-CAPACITY PLANNING

Im working on a REM environment.
I have a problem in the Capacity Planning
1.Im using the CM21 for sequencing my planned orders.
2.I have created some individual capacity for one workcentre.
3.When itry to use the CM27 i dont find any planned orders in this levelling capacity planning table.
Your valuable inputs are required

Hi Sateesh,
I am unable to understand the reason why capacity planning is being used if REM is being used?
The transactions what you have mentioned is for Production order/Related planned orders.
To my knowledge for REM "MF50" will be used to analyse the load and also assign load to production line. "LAS2" is used for sequencing change.
Hope this helps..
Regards,
Prasobh
Reward your points if this was helpful.

Use of Planning Table (MF50) in Capacity Levelling with Production Order

Hello Experts
I wish to know that is it possible to perform Capacity Levelling in planning table (tcode MF50) with respect to a Production Order ? It is known that MF50 is used in Repetitive manufacuring to do the capacity levelling with respect to Planned orders. But in our discrete manufacturing scenario we want to use planning table to the capacity levelling with respect toa Production order.
Any clue or help pertaining to this will be highly appreciated.
Thanks in advance
Regards
Jayanta

Dear ,
MF50 is does the cacapcity leveling based on mateail -run schedule order (planned order ) where as in discrete manufacturing , when you run the MRP , MRP system assume Infinite Capacity and schedule the order as per your selection in MD02(2,1,3,3,2) and then you convert those planned order to Production order .Here you checkied the Capacity in Production Order level .
In stanadrd SAP , it is not possible to use MF50 for discrete production order.
In discrete order or process order , do the caapcity leveling , there are seperate planning table available based on Over all Capacity Profile and Schedule type .This can be done in following way :
1.CM31-Production Order Wise -Tabular
2.CM23-PO wise -Graphical
3.MC88: Ruf Cut Planning
Work Centre Wise : CM21 -Graphical , CM22-Tabular Planning Table .
Make sure the below set up before you carry on the Capacity leveling :
.Define time profile in OPD2.
Define the strategy profile in OPDB
Define the Overall profiles in OPD0.
In OPJK maintained check capacity with SAPSFCG013 profile for your production order type
In OPU3 , scheduleing parametre s: Generate Capacity , Scheduling Type , Automatic Log ,Start date in Past as per your req.
In OPJU , chekc the contol tab of the scheduleing as per OPU3
In OPKP- Production scheduling paranmeters assing the overall capacity profile -SAPSFCG013 with finte scheduling tick.
Master Data :
1.Materials Master define the Production scheduler and production scheduling profile
2.Work Center - Define the capcity planner group,activate checkbox Relevant for Finite sceduling,on the capacity header define the shift timings,break timings and unit of measure,no of individual capaity, enter formula for scheduling in capacity view.
3.Routing - enter the values for the standard values. Use control key with scheduling.
Hope this will help you .
Regards
JH

Any good table for Capacity Planning?

HI all,
Is there any table for capacity planning?
we want to do some development to get capacity requirements data for each work center, don't like using CM01.
Thanks!
Harvey

Dear
Please find below SAP tables for CRP :
CRHD         Workcenter Header Data
CRCA         Workcenter Capacity Allocation
CRCO         Workcenter Cost Center Assignment
CRHH          Hierarchy Header
CRHS           Hierarchy Structure
CRTX          Workcenter Text
KAKO         Capacity Header
KAZY          Intervals of Capacity
Regards
JH

Tables for capacity planning?

HI all,
Is there any table for capacity planning?
we want to do some development to get capacity requirements data for each work center, don't like using CM01.
Thanks!
Harvey

>
harvey wu wrote:
> HI all,
>
> Is there any table for capacity planning?
> we want to do some development to get capacity requirements data for each work center, don't like using CM01.
> Thanks!
>
> Harvey
Hi Harvey,
Kindly check if the Below tables satisfy ur requriement
KBED      Capacity Requirements Records
KBEZ      Add. data for table KBED (for indiv. capacities/sp
KBKO      Header Record for Capacity Requirements
Reg
Dsk

Activating capacity display in Planning table of MF50.

Hi Experts,
I intend to use the MF50 for Planning my FG. My scenario is a normal PP PI and not REM. I am using production version to distinguish the work centre (defined as production place). I want to display the Capacity of the Workcentre on the MF50 screen along with the Planning table. I am able to see the Prod Versions, planned ordes / requirements on the screen. My only concern is I want to display the capacity on the same screen, I found that the Activate graphic and set graphic settings in the Capacity reqt planning have got greyed out.
I request the experts to guide me in this case.
Regards,
A S K

Hi
Check the following settings :
1. In production Version whether work center is maintained as production line or not ? .Also make sure that same work center ins maintained in Routing or not .
2. In MF50 Initial selection screen Scheduling TAB check whether 'capacity requirement ' along with detailed planning is activated or not.It must be activated.
Regards,
Velmurugan S

REM Planning table - Capacity requirements and Levelling.

Hi i have few queries in REM planning table.
In REM planning table MF50 my selection is based on entire plant. Here in total capacity data tab for any particular plant it will show the list of work centers which are maintained in particular plant to know the capacity details as per our requirement.
1.When i select any WC line and click on change capacity display from CRP it is giving break up with required and available capacity hours for any particular WC available time is assume 22.5 hrs per day which is given in operating time in capacity header in WC but in MF50 it is showing 23hrs.I have defined shift sequence in OP4A and assigned in capacity header grouping which have 3 shift with 30 mins break in each shift which results in 22.5 hrs working for a day so in shift sequence and operating time it is mentioned as 22.5 hrs is the time available for day but in MF50 it is showing 23 hrs available for day?
2.What is due% in MF50 total capacity data for any work center and how required time would be calculated?
Appreciate if any one has any example.
Cheers
KK

Hi bump for any suggestions?
i have noticed one thing the time available is a round up value actual time available as per capacity header is 22.5 but in MF50 it is showing as 23..if i change to 21.5 then it is showing 22hrs available per day is this the standard behaviour?
can anyone tell me how the required time is calculated?
Cheers
KK

Machine capacity planning and efficency

Dear Guru,
I have number of machines and i want there individual capacity and efficency can we see that by any report or any tcode to see all capacity of machine.What is capacity leveling.
Is thee any configuration for capacity planning.
Thanks in advance

Hi, the following configuration steps involved in the capacity planning: SPRO --> IMG --> PRODUCTION --> CAPACITY REQUIREMENT PLANNING Capacity Requirements Planning: 1) Define time units 2) Define Capacity Category 3) Set up Capacity Planner. 4) Define parameters 5) Define Standard value key. 6) Define Move time matrix. 7) Define Setup matrix. 8) Define Control Key. 9) Define Shift Sequence. 10) Define Key for performance efficiency rate. 11) Define Formula parameters. 12) Specify Scheduling type. 13) Set up Production scheduler group 14) Select Automatically. 15) Define Scheduling parameters for Production orders 16) Define Scheduling parameters for networks. 17) Define Reduction Strategies planned/ production orders. 18) Define Reduction Strategies for network/process orders. 19) Define Control Profile. 20) Define Selection profile. 21) Define time profile. 22) Define Evaluation profile. 23) Define Strategy Profile. You can follow these above configuration steps in capacity planning Yes you need to active your all work center for the finite scheduling at the bottom of capacity view. Use all standard SAP configurations, Capacity Leveling Profile. Define time profile in OPD2. Define the strategy profile in OPDB Define the Overall profiles in OPD0. Then only you need to to active your all work center for the finite scheduling at the bottom of capacity view in work center.(CR02) Then run MRP with scheduling- 2 Lead time scheduling and capacity planning.(MD02) You will get your capacity requirement in CM01, or CM25/CM21. In rem you can use MF50. -
OR refer below steps Capacity Planning Evaluation: Use this procedure to Evaluate the Capacity of a Work Center (Resource). The same transaction will be used for finding out the Capacity Overload on the Work Center Select Logistics -> Production -> Capacity Planning -> Evaluation ->Work Center View ->Load and go to the Capacity Planning Selection screen (CM01) Through capacity planning : Standard overview :System will show week wise overload in Red Color. If there is no overload then system will show in the normal color. Date wise Capacity can be overviewed. If there were capacity overload, system would show with Red Color indication and Percentage overload can be viewed. Through capacity planning : Standard overview: Details: Date wise, planned process order wise capacity requirement. Through capacity planning : Standard overview: Graphical: Yellow Color indicates capacity lying un-used. Red Color Bars is the indication for Capacity Overload and Blue Color Bars indicate for Capacity available Use this procedure to Level / Schedule the Capacity of a Work Center Capacity Planning - Levelling/Scheduling: Select Logistics ->Production->Capacity Planning -> Levelling -> Work Center View and go to the Planning Table (Graphical) screen (CM21) Key Points u2022 This would be used for Shop floor production scheduling u2022 Capacity Scheduling is mandatory for correct results of Master Production Schedule and Material Requirement Planning For settings: Define formulas for resources: (OP54) IMG -> Production Planning For Process Industries -> Master Data ->Resource->Capacity requirements planning->Formulas for resources->Define formulas for resources. For formula parameters for Resource/workcentre:(OP51) IMG -> Production Planning For Process Industries -> Master Data ->Resource->Capacity requirements planning->Formulas for resources->Define formula parameters for resources-> Standard Value u2013 Define Parameters (OP7B) IMG -> Production Planning For Process Industries -> Master Data ->Resource-> General Data -> Standard value -> Define Parameters Define standard value key(OP19) IMG -> Production Planning For Process Industries -> Master Data ->Resource-> General Data -> Standard value -> Define Standard Value First configure the below settings in the capacity Planning. 1) Define time units Path : SPRO ->Production-> Capacity Requirements planning ->Master Data-> Define Time units (OPCF) 2) Define Capacity Category Path : SPRO ->Production ->Capacity Requirements planning->Master Data-> Capacity Data ->Define Capacity category. 3) Set up Capacity Planner. Path : SPRO ->Production ->Capacity Requirements planning -> Master Data->Capacity Data -> Set up Capacity Planner 4) Define parameters Path : SPRO->Production ->Capacity Requirements planning -> Master Data ->Work Center Data->Standard value ->Define Parameters (OP7B) 5)Define Move time matrix. Path : SPRO -> Production-> Capacity Requirements Planning -> Master Data-> Work Center Data -> Define Move time Matrix (OPCN) 6) Define Setup matrix. Path : SPRO -> Production ->Capacity Requirements Planning -> Master Data -> Routing data -> Define Setup Time Matrix 7)Define Control Key. Path : SPRO-> Production-> Capacity Requirements Planning -> Master Data ->Routing data -> Define Control Key(OPCG) 8) Define Shift Sequence. Path : SPRO -> Production-> Capacity Requirements Planning -> Operations -> Define Shift Sequences (OP4A) 9) Define Key for performance efficiency rate. Path : SPRO-> Production -> Capacity Requirements Planning -> Operations-> Available Capacity-> Define Key Performance Efficiency Rate (OPDU) 11) Specify Scheduling type. Path : SPRO ->Production ->Capacity requirements Planning->Operations->Scheduling ->Specify Scheduling Type (OPJN) 12) Set up Production scheduler group. Path : SPRO ->Production->Capacity requirements Planning -> Operations -> Scheduling -> Set up Production Scheduler Group (OPCH) 13) Select Automatically. Path : SPRO -> Production -> Capacity Requirements Planning ->Operations->Scheduling ->Task List Type-> Select Automatically (OPJF) 14) Define Scheduling parameters for Production orders. Path : SPRO -> Production ->Capacity Requirements Planning-> Operations->Scheduling -> Define Scheduling Parameters for Production orders (OPU3) 15) Define Reduction Strategies planned/ production orders. Spro-> Production->Capacity reqirements planning->operations->Scheduling->Reduction strategies->Define reduction strategies planned-/production order 16) Define Reduction Strategies for network/process orders. Spro-> Production->Capacity reqirements planning->operations->Scheduling->Reduction strategies-> Define reduction strategies for network/process order 17) Define Selection profile. Spro->Production->Capacity requirements Planning->Evalution->Profiles-> Define selection profiles Hope clear to u. Regards Alok

HR personnel availability as input to PM labor capacity planning

Good Day SAP Gurus!
I am looking at using HR's personnel availability as input to PM capacity planning.
I am planing to take this approach;
1.Reference HR in shift definition in IMG
2.Use the shift grouping in Work Ctr capacity header
3.Define Interval of Available Capacity using the shift defined
Appreciate your valuable inputs for the above steps to ensure it will work as well as the transactions/table to check personnel availability between HR and PM.
Also, I have read that I can use "Performing Work Center" in operations of capacity category "personnel" for the same purpose but I don't know how this works.
Anyone has better approach? Thanks a lot in advance!!

Hi
without knowing the answer:
i would first check the integration points of PErsonnel Time Management with other SAP Applications. As far as I remember is the "CATS" (Cross Application Time Services) function collecting data for cross company topics, like capacity leveling tasks.
regards,
Andreas R

EXtractor for Capacity planning

HI, I cant find any extractor for manufacturing capacity planning, data are stored in tables KBED + KBKO on R3 side. Have You any advice
Thanx

Hi,
Check with 2LIS_04_* datasources.
Thanks
Reddy

Capacity planning tables.

Similar Messages

Maybe you are looking for