Capacity reservation in SCM 5.1

Hi Gurus,
We are trying to configure the capacity reservation functionality in SCM 5.1. We followed all the steps indicated in this link
http://help.sap.com/saphelp_scm2007/helpdata/en/6b/41fc3e9d3b6927e10000000a114084/frameset.htm
However, when we create PIR against a particular descriptive characteristics, eventhough the requirement is within the limits of reservation, the planned order created is consuming the Unreserved Capacity (Released).
Have anyone used this functionality or any thoughts on this issue?
Thanks,
Rajesh Manoharan
9740072537

This query is solved

Similar Messages

  • How can i use capacity reservation group

    I have a set of slow moving SKU which i want to plan in a specific week every month , I know i can use PPC calendars for that but how can i use capacity reservation group in SCM 7.0 to achive this through wave heuristic
    Please advise
    Prasanna NBaware

    Hi Ambrish,
    PPDS capacity reservation functionality available from version  SCM 5.1 onwards. for your requirement you can reserve the capacity  at resource level  for product.
    To archive this requirement, you need to do
    u2022Create Planning Object Structure (POS) with the required characteristics (Product & Location mandatory)
    u2022Create a planning area assigning the planning object structure
    u2022Create Characteristics Value Combination (CVC) in the POS
    u2022Maintain Capacity Reservation Group (resource)
    u2022In Product Master > Demand Tab> assign the consumption group
    Result: .     Planned order gets created for the demand based on the allocated quantity for the particular period
    please let me know if you have any further question
    bye
    Dhaiva

  • Planning with commercial capacity reservation

    Hello
    I saw in the SCM2007 enhancement that it is possible to plan with resource capacity reservation based on commercial charactéristics.
    Where can I find documentation about these settings and master data associated?
    Thanks in advance for your support
    regards
    patrice

    Refer SAP note 1084829/ 1155902/1158403 /1237623
    hope this gives you a clear picture of this funtionality.
    I have myself used this funtionality so if you have any query pls ask me
    Warm Regards
    Vaibhav Sareen

  • Capacity Reservation Table for a planned order

    Dear experts,
    When I look at MD13, I can see the capacity requirement for a planned order.  I can also see the requirements build up in my CM01 screen.  We would like to pull the data into our BW system, but we are having issues finding where the capacity reservation information resides.  When I look at table KBEZ, I can only find values that correspond to production orders.  Is there a similar table for planned orders?  Does SAP save the detailed scheduling infromation for planned orders in a table somewhere, or is this calculated at the time MD13 or CM01 is run?
    Thanks,
    Matthew Bruckner

    Have you tried with KBED? I can see with SE16 that you have a field for selection with the planned order number....

  • APO Capacity Reservation Characteristic is not valid

    Hello
    We are trying to setup a scenario for capacity reservation for customers wherein we want to reserve capacity for certain customers. We did the following setup as mentioned in help
    http://help.sap.com/saphelp_scm70/helpdata/EN/46/19bf1f8716424fe10000000a1553f6/frameset.htm
    1) Setup consumption group: Included our custom DP characteristics & assigned them to standard infoobjects MATNR, WERKS, KUNNR
    2) Setup forecast at material, location & customer level in DP planning area
    3) Maintained consumption group in release profile as well as product master with planning strategy.
    4) Released the data to order series & descriptive characteristics are correctly visible via green icon at material, plant & customer level.
    5) Created capacity reservation group via customising: Assigned consumption group & selected KUNNR as characteristic for maintaining reservations.
    6) Assigning capacity reservation group to resource via PPDS bucket tab: Here we took time continuous capacity in bucket definition field, bucket schema as day, finite capacity as bucket capacity.
    In next step clicking on capacity reservation & selecting characteristic, it gives error saying reservation characteristic is not valid & does not allow us to maintain reservations for the characteristic
    Please let us know if any setting has been missed. Thanks in advance
    P.S: The pre-requisite in sap help link above mentions assigning consumption group to resource. But was not able to find how to do this. Only the capacity reservation group is allowed to be added.
    Best Regards
    Satish

    Hello Manimaran
    Thanks for reply.
    The consumption group is maintained correctly with the correct planning area. The planning area is correctly initialised & we are checking the resource against the same version only.
    As mentioned, the forecast was correctly released from DP to order series with required descriptive characteristics.
    The issue is occuring while selecting the characteristic. As soon as we select characteristic from pop up, the error appears.
    mentioning  reservation characteristic is invalid.
    In the popup there are two columns (characteristic & descriptive characteristic), However onlky the characteristics column is shown which is picked from the capacity reservation group (i.e. if we remove the characteristic from capacity reservation group, it gets removed from popup as well). I guess the error is occuring due to the column descriptive characteristic which is missing.
    Please advice. Thanks in advance
    Best Regards
    Satish

  • Missing reservations in SCM, probably deleted CIF queue records

    Dear experts,
    Here's a very annoying problem... During initial CIF execution, someone probably deleted some queue records concerning reservations. At least that's what we suspect has happened.
    The initial CIF execution was done on 1 April, and the reservations for that day are partially missing in APO.
    In ERP, we have table RESB with a certain sum of withdrawal quantity for each product.
    In SCM, in product view, the withdrawal quantity in forecast should be exactly the same, but the records for 1 April are not considered in that quantity. For some other products, the allocated quantity differs from ERP as well.
    How this inconsistency was created isn't really important now... But has anyone here any idea how to quickly fix the quantities in APO forcast? Like any BAPI or programme or anything?
    Thanks a lot!
    Jan
    P.S: I forgot to mention: The documents in ERP are closed by now, so a new initial CIF execution wouldn't bring the old reservations to APO.
    Edited by: Jan Krohn on Apr 12, 2010 2:57 PM

    Hi Jan,
    Check the following whether this helps to your fix your scenaio.
    1) Enhancement APOCF028
    2) Badi  /SAPAPO/SMOY_PUB_APP
    3) Enhancement APOCFPRV
    4) Enhancement APOCF009
    Regards
    R. Senthil Mareeswaran.

  • SCM 2007 and SCM 5.0 difference and benefits

    Hello,
    We are planning to upgrade our APO solution to the next version.  I wanted to  know if anyone has done any analysis between SCM 5.0 and SCM 2007 which points outs it differences and it's benefits.
    Also SCM 2007 being the latest version, is it stable version to upgrade.
    Please advise.
    Regards,
    Sanju

    SCM 2007 Vs. SCM 5.1:
    Product name is SCM 2007. SCM 5.1 is component under SCM 2007. However it is noted that these names are typically used interactively.
    As product is newly introduced...unless you need critical functionality being newly provided, you could wait till initial stabilization happens.
    Benefits:
    Enterprise Service bundle
    DP: Flexible graph generation, usability for context menu, identify/delete obsolete CVCs, enhancements in <<
    Graphics, Selection Mgmt
    >>
    SNP: Profitability driven SCM, Optimization - prioritization, sequence dep. setup costs, quota arrangements , receipt bounds, BADIs for master data edit thru CIF, enhancements in <<
    Shelf-life, subcontracting, Prod. Interchangeability, graphics, CTM
    >>
    PP/DS: User maintained capacity reservations,  MRP based detailed scheduling, download SNP blocks, Enterprise Services, enhancements in <<
    Campaign Planning, CTP
    >>
    SCM 7.0: This is still in development by SAP.

  • Error-maintaing Reservation Characteristic in Resource (Capa Reservation)

    Hi All, we are trying to implement Capacity Resolution scenario on APO SCM7.0
    While maintaining Descriptive Characteristic in the Resource, we are getting error: u201CThe Reservation Characteristic is not validu201D (as mentioned in step 6). The related message number is u201C/SAPAPO/CAPREV003u201D.
    We have done following setup:
    1. Maintained the field catalog containing the required fields/characteristic (MATNR, WERKS, KUNNR)
    2. Maintained a consumption group.
    3. Maintained Capacity Reservation Group containing consumption group with all characteristic
    4. Assigned the consumption group to the product master. (Demand tab page of the location-product). Assigned requirements strategy = 20 (Planning with final assembly) u2026 u2026 suitable for descriptive characteristics.
    5. Maintained a (PP/DS) Time Continuous Resource
    6. Need to maintain Capacity Reservation Group & Characteristic for the resource. For that we followed: Tab-PP/DS Bucket Cap. --> Button-Capacity Reservation. But, while maintaining Descriptive Characteristic, we are getting error: u201CThe Reservation Characteristic is not validu201D.
    Query:
    (a) When we do F4 in Characteristic under Descriptive Characteristic, we can view two columns Char. & Descriptive Char. In the column Characteristic the 3 fields are present. But against these 3 fields no value is present in the column descriptive Characteristic. Is it the reason for issue, If yes, what can be the fix.
    Characteristic     Descriptive Characteristic
    KUNNR     
    MATNR     
    WERKS     
    (b) Is it required to assign Capacity Reservation Group to Resource? If yes, How/where?
    7. In Demand Planning created a master planning object structure containing the descriptive characteristics. (also Planning Area)
    8. Created characteristic value combinations that include the values of the descriptive characteristics
    9. Created a forecast for the product using Demand Planning functionality.
    10. Released the Forecast to SNP. The descriptive characteristic can be verified in product view (after clicking on the triangle).
    Thanks & Regards,
    Milind Joshi

    Hi Milind,
    Have you maintained number range intervals for capacity reservations?
    Please refer the SAP note 1073568 for more details.
    Also, please check the following,
    1. in consumption group creation you maintained the correct planning area.
    2. You have initiated planning version for your planning area.
    3. You have used the same planning version in your resource.
    Since the Characteristic values in MPOS are linked to Capacity reservation Group through Planning Area, there may be some inconsistency in these settings only.
    Also refer the SAP note 1368244 if it is helpful,
    Regards,
    Manimaran M.

  • Integration of customers and vendors- customer exit for renaming

    We are planning to use customers for capacity reservation functionality and vendors for subcontracting in APO.
    Due to this, we will need Vendors and Customers in APO.
    Currently some plants are using same number range for customers and vendors.
    So, we will have to rename either customer number or vendor number.
    In such situation, do you recommend renaming customer number or Vendor number?
    Do you see impact of renaming customer or vendor in above processes?
    Can you please e-mail me which customer exit  I should use and steps that should be followed for renaming?
    Thanks,
    Srini

    Your problem:
    Different location types with the same name or number in the external system. For example, a customer and a supplier both have the number 1000. This problem occurs especially with vendor and customer numbers.
    You can do the following:
    described in SAP Note 458914.
    Activate BAdI Implementation for Location Prefix
    Procedure
    1.     Access the activity using one of the following navigation options:
    SAP SCM Menu     Tools  Customizing  IMG  Execute Project  SAP Reference IMG  SAP Implementation Guide  SCM Basis  Integration  BAdIs for Specific Applications  Location and Business Partner  BAdI: Inbound Processing for Location
    Transaction Code     SPRO
    2.     In the Business Add-Ins: All Implementations for Definition SMOD_APOCF001 dialog box, go to the Defined filters table and select the suitable implementation for your problem situation, for example:
    Field Name     Entry Value
    Bus. add-in implementation name     APOCF001_TYPEDIF
    Implementation short text     Locations of different type with similar names
    3.     Choose Change.
    4.     Confirm the warning message.
    5.     On the Business Add-In Builder: Change Implementation APOCF001_TYPEDIF screen, choose Activate business add-in implementation.
    6.     In the Prompt for transportable Workbench request dialog box, enter a workbench request and press ENTER.
    7.     Choose the Back pushbutton (F3) twice.

  • When planned orders can reserve capacity

    hi experts.
    after MRP Run i had 3 planned orders, one of them for safety stoock and the others for PIR , and i converted one of Planned orders (For PIR) to Production order,,,,,,,,,,,,,when i made capacity evaluation for the work center using CM01........i found capacity requirements made for Production order and PIR Planned order but no requirements for safety stock order????  whyyyyyyyyyyy?
    I want to know when planned orders can reserve capacity and when they cant.
    thank you

    Abobakr,
    I believe you are talking about creation of capacity requirements, not reservation of capacity. 
    Planned orders will create capacity requirements when
    1.  They are configured to generate capacity requirements during Detailed scheduling (OPU5)
    2.  They have been Detailed scheduled (either manually, or using MRP Scheduling 2 ''Lead time scheduling and capacity planning')
    3.  They are scheduled using a valid Routing which contains a capacity consuming (finite) work center in one of their operations.
    A common reason to see planned orders that are not detailed scheduled is because of the way MRP is run, using Basic dates instead of lead time scheduling.  Another common reason is that the routing is invalid, particularly due to the planned order containing dates that are outside the routing's effectivity dates.
    Rgds,
    DB49

  • Reserve Capacity for rush orders

    Dear Gurus,
    How can I reserve work center capacity for rush orders?
    Whatt are the settings for the same?
    Thanks in advance.
    Regards,
    RG

    RG,
    This is a business question, not an SAP question.  I will assume that you have fully thought out all the implications of 'reserving' capacity.
    One standard way is to maintain the unreserved capacity in your work center as your actual capacity.  Then, when the rush order appears, create a capacity interval in your work center, that reflects the increased capacity required, for the duration required.
    Another traditional way is to create a dummy material which consumes the same capacities as regular materials.  Create and dispatch  a dummy production order for this material that consumes the amount of capacity you wish to reserve.  Keep moving the due date farther into the future as the days of capacity consumption approach "today'.  When you actually have to dispatch the rush order, move the dummy order into the future such that the capacity you want is freed.  Then, enter your new order and dispatch it to take the capacity.
    Rgds,
    DB49

  • Capacity Leveling in SNP SCM 5.0

    Hi,
    I want to use the SNP heuristic followed by capacity leveling in order to enable my customer to check capacity requirements in terms of machine and people resources. The particular requirements are:
    1. no backward/forward capacity leveling
    2. level the capacity across alternate resources
    I don't see how I can do 2 without doing 1. I haven't seen a parameter about the number of days allowed in backward/forward leveling (which I would set to zero or to a low number e.g. 2 days)
    Best Regards,
    JL

    I dont think you should be using the standard capacity levelling functionality at all if you are not going to level it forward or backward
    What you need to think of is planning using Aggregated resources.
    In a nutshell you creatae new header resources that are of capacity equivalent to your resources plus alternate resources
    Do SNP plannign on the aggregated ( header )resource
    Level or trim any excess capacity requirements (levelling wouldve done this for you but you got to specify the direction)
    Disaggregate to the member resources based on some disaggregation rules (or you can customize this)
    check help on :-
    http://help.sap.com/saphelp_scm50/helpdata/en/43/03b0b3dccd22f3e10000000a1553f7/content.htm

  • Battery Calibration and Charge Capacity?

    I am currently using a PB G4 15" (high res DL SD) and I've had it for about a month. I just read about calibrating the battery and went ahead and did it. Have I done any damage to the battery or shortened it's effectiveness by waiting a month to calibrate rather than when it was first out of the box?
    Also, i also just read about checking the battery charge capacity using the system profiler. My charge capacity prior to calibration was 2731 and after calibration it's 2930. However, it sounds like it should be in the 4400's based on the posts I've read. What do these numbers mean and do I have a faulty battery since it's so low?
    Thanks for your help.

    Hi Kevin --
    Yeah, I'm not loving those numbers you posted either. I'd try performing the calibration procedure once or twice more to make sure that that battery capacity number doesn't change.
    The other thing I would do if I were you is download Coconutbattery: http://www.versiontracker.com/dyn/moreinfo/macosx/27425
    It's a free app available at versiontracker and it will tell you your battery's original capacity as well as it's current capacity.
    I agree with you that a capacity of 2930 mAh after only a month of use and 16 cycles suggests that your battery is defective and should be replaced at no cost to you under the terms of the warranty.
    For a frame of reference, after 10 months of use and 166 load cycles, my battery's original capacity of 4400 mAh is now 4228 mAh. No way yours should be in the 2930 mAh range.
    When you call AppleCare to arrange for a replacement, if in fact that's what you end up needing to do, the agent you speak with, in addition to making sure that you've properly calibrated your battery a few times (as mentioned earlier) may also ask that you reset your PB's Power Management Unit (PMU). While I'm skeptical that a PMU reset will alter the outcome, you can find instructions on how to reset the PMU here (just in case you need to): http://docs.info.apple.com/article.html?artnum=14449
    Good luck and please post back how everything turns out.
    -- JDee
    PS. You probably know this, but the calibration procedure has been changed slightly for your DL hi-res version of the PB. Here it is below, just to make sure:
    PowerBook G4 (15-inch Double-Layer SD)
    The battery calibration for the PowerBook G4 (15-inch Double-Layer SD) has been updated because of a new battery released with this computer. With these computers, follow these steps to calibrate your battery:
    Plug in the power adapter and fully charge your PowerBook's battery until the light ring on the power adapter plug changes to green and the onscreen meter in the menu bar indicates that the battery is fully charged.
    Allow the battery to rest in the fully charged state for at least two hours. You may use your computer during this time as long as the adapter is plugged in.
    Disconnect the power adapter with the computer still on and start running the computer off battery power. You may use your computer during this time. When your battery gets low, you will see the low battery warning dialog on the screen.
    Continue to keep your computer on until it goes to sleep. Save all your work and close all applications when the battery gets very low, before the computer goes to sleep.
    Turn off the computer or allow it to sleep for five hours or more.
    Connect the power adapter and leave it connected until the battery is fully charged again.
    Tip: When the battery reaches "empty", the computer is forced into sleep mode. The battery actually keeps back a reserve beyond "empty", to maintain the computer in sleep for a period of time. Once the battery is truly exhausted, the computer is forced to shut down. At this point, with the safe sleep function introduced in the PowerBook G4 (15-inch Double-Layer SD) computers, the computer's memory contents have been saved to the hard drive. When power is restored, the computer returns itself to its pre-sleep state using the safe sleep image on the hard drive.
    Message was edited by: JDee

  • SNP Planned order not following resource bucket capacity/factory calendar

    Hi gurus,
    SCM 5.0
    I am running SNP heuristics for a product and expecting planned orders for it.  It has corresponding production data structure and multimixed resource.  The resource has an assignd factory calendar and SNP bucket capacity.  The bucket capactiy availablity dates of the resouce is consistent with the factory calendar workdays/holidays.  Using simple lot for lot strategy, I am expecting heuristics to schedule the planned orders on the dates of the demand in compliance with teh SNP bucket capacity availability of the resource.  APO does not schedule on holidays consistent with bucket capactiy.  This is true until...
    We have a public holiday in factory calendar that needs to become a workday. To remedy this, we put a special rule for the factory calendar and explicitly made that holiday into a workday.  The changes were synchronized with APO, and this is also reflected in the bucket capacity of the resourc: former holiday now has bucket capacity after the calendar change.  However, when running heuristics, it still does not create SNP planned order on that former holiday that has been changed into workday.  Even if it is a public holiday, there is already a special rule for the factory calendar and the resource bucket capacity reflects this correctly. But SNP heuristics seems not to follow this change.
    Any ideas on this? looks like a bug.

    Hi Edgar,
    Yes, when your resource reflects the addional capacity of the holiday turned working day, then it is expected to be considered for the SNP planned order.
    Instead of SNP heuristics, you may try to check interactively in SNP planning book, if manual order creation in the bucket works out.
    Since this is a mutlimix  resource , it can also be checked if in PPDS planned order can be created on the day.
    The above checking may not solve your problem , but will get to know if at least manully the bucket is being considered or not.
    regards
    Datta

  • SAP SCM Upgrade-Issue in STARTSAT_TRANS in execution phase

    Hi Experts,
    I am running sap upgrade of SCM 5.1 to SCM 7.0 EHP3.
    My Environment is
    OS : windows server 2008 R2
    Source Kernel :720_ext_rel
    DB: MS SQL server
    In Execution phase i have encountered issue with MAIN_SWITCH/STARTSAP_TRANS phase and below are the error details and log.
           Checks after phase MAIN_SWITCH/STARTSAP_TRANS were negative!
    Last error code set: Process C:\usr\sap\SCN\DVEBMGS51\exe/sapcontrol.exe exited with 2, see 'C:\usr\sap\SCN\SUM\abap\log\SAPup.ECO' for details<br/> System start failed    
    SAPup.ECo log details :
    30.05.2014 02:05:28
    StartWait
    FAIL: Timeout
    SAPup> Process with PID 15804 terminated with status 2 at 20140530020528!
    SAPup> Starting subprocess in phase 'STARTSAP_TRANS' at 20140530020528
        ENV: DBMS_TYPE=mss
        ENV: JAVA_HOME=C:\j2sdk1.4.2_26-x64
        ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.PSC1;.MSC
        ENV: PATH=C:\usr\sap\SCN\DVEBMGS51\exe;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\WINDOWS\system32\WindowsPowerShell\v1.0;C:\j2sdk1.4.2_26-x64\bin;C:\Program Files (x86)\Java\jre6\bin;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;C:\usr\sap\SCN\SYS\exe\nuc\NTAMD64
        ENV: SAPSYSTEMNAME=SCN
        ENV: dbs_mss_schema=scn
    EXECUTING C:\usr\sap\SCN\DVEBMGS51\exe\sapcontrol.exe -format script -prot PIPE -host SCM51NUN -nr 51 -function GetProcessList
    30.05.2014 02:05:28
    GetProcessList
    OK
    0 name: msg_server.EXE
    0 description: MessageServer
    0 dispstatus: GREEN
    0 textstatus: Running
    0 starttime: 2014 05 30 01:46:21
    0 elapsedtime: 0:19:07
    0 pid: 4640
    1 name: enserver.EXE
    1 description: EnqueueServer
    1 dispstatus: GREEN
    1 textstatus: Running
    1 starttime: 2014 05 30 01:46:21
    1 elapsedtime: 0:19:07
    1 pid: 5144
    2 name: disp+work.EXE
    2 description: Dispatcher
    2 dispstatus: YELLOW
    2 textstatus: Running but Dialog Queue info unavailable
    2 starttime: 2014 05 30 01:46:22
    2 elapsedtime: 0:19:06
    2 pid: 6872
    in MMC  Dispatcher status is Yellow with text " Running but Dialog Queue info unavailable".  Is this the cause of this issue?
    If so, how to resolve this issue?
    Please help me resolve this issue.
    Thanks,
    Krishna

    Hi Jaun,
    here is the DEV_W0 log
    trc file: "dev_w0", trc level: 1, release: "720"
    *  ACTIVE TRACE LEVEL           1
    *  ACTIVE TRACE COMPONENTS      all, MJ
    M sysno      51
    M sid        SCN
    M systemid   562 (PC with Windows NT)
    M relno      7200
    M patchlevel 0
    M patchno    500
    M intno      20020600
    M make       multithreaded, ASCII, 64 bit, optimized
    M profile    C:\usr\sap\SCN\SYS\profile\SCN_DVEBMGS51_SCM51NUN
    M pid        2840
    M
    M  kernel runs with dp version 139(ext=120) (@(#) DPLIB-INT-VERSION-139)
    M  length of sys_adm_ext is 376 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 2840) [dpxxdisp.c   1381]
    I  MtxInit: 30000 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    M  DpIPCInit2: read dp-profile-values from sys_adm_ext
    M  DpShMCreate: sizeof(wp_adm) 22880 (1760)
    M  DpShMCreate: sizeof(tm_adm) 4976768 (24760)
    M  DpShMCreate: sizeof(wp_ca_adm) 56000 (56)
    M  DpShMCreate: sizeof(appc_ca_adm) 56000 (56)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/16/776048/776064
    M  DpShMCreate: sizeof(comm_adm) 776064 (1528)
    M  DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    M  DpShMCreate: sizeof(slock_adm) 0 (232)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M  DpShMCreate: sizeof(file_adm) 0 (80)
    M  DpShMCreate: sizeof(vmc_adm) 0 (1864)
    M  DpShMCreate: sizeof(wall_adm) (25648/42880/64/104)
    M  DpShMCreate: sizeof(gw_adm) 48
    M  DpShMCreate: sizeof(j2ee_adm) 2032
    M  DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000FD20050, size: 5970896)
    M  DpShMCreate: allocated sys_adm at 000000000FD20060
    M  DpShMCreate: allocated wp_adm_list at 000000000FD22A20
    M  DpShMCreate: allocated wp_adm at 000000000FD22C10
    M  DpShMCreate: allocated tm_adm_list at 000000000FD28580
    M  DpShMCreate: allocated tm_adm at 000000000FD285D0
    M  DpShMCreate: allocated wp_ca_adm at 00000000101E7660
    M  DpShMCreate: allocated appc_ca_adm at 00000000101F5130
    M  DpShMCreate: allocated comm_adm at 0000000010202C00
    M  DpShMCreate: system runs without slock table
    M  DpShMCreate: system runs without file table
    M  DpShMCreate: allocated vmc_adm_list at 00000000102C0390
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated gw_adm at 00000000102C0440
    M  DpShMCreate: allocated j2ee_adm at 00000000102C0480
    M  DpShMCreate: allocated ca_info at 00000000102C0C80
    M  DpShMCreate: allocated wall_adm at 00000000102C0D00
    M  DpCommAttachTable: attached comm table (header=0000000010202C00/ft=0000000010202C10)
    M  DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
    M  rdisp/queue_size_check_value :  -> on,50,30,40,500,50,500,80
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  <ES> EsILock: use spinlock for locking
    X  Using implementation view
    X  <EsNT> Using memory model view.
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    X  mm.dump: set maximum dump mem to 192 MB
    X  mm.dump: set global maximum dump mem to 192 MB
    X  EsRegisterEmCheck: Register EmGetEsHandles at 0000000140D4F7D0
    M  DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
    M  ThStart: taskhandler started
    M  ThInit: initializing DIA work process W0
    M 
    M Fri May 30 05:23:47 2014
    M  ThInit: running on host SCM51NUN
    M 
    M Fri May 30 05:23:48 2014
    M  calling db_connect ...
    B  Loading DB library 'C:\usr\sap\SCN\DVEBMGS51\exe\dbmssslib.dll' ...
    B 
    B Fri May 30 05:23:49 2014
    B  Library 'C:\usr\sap\SCN\DVEBMGS51\exe\dbmssslib.dll' loaded
    B  Version of 'C:\usr\sap\SCN\DVEBMGS51\exe\dbmssslib.dll' is "720.00", patchlevel (0.442)
    C  Callback functions for dynamic profile parameter registered
    C  Thread ID:2040
    C  Thank You for using the SLODBC-interface
    C  Using dynamic link library 'C:\usr\sap\SCN\DVEBMGS51\exe\dbmssslib.dll'
    C  dbmssslib.dll patch info
    C    SAP patchlevel  0
    C    SAP patchno  500
    C    Last MSSQL DBSL patchlevel 0
    C    Last MSSQL DBSL patchno         442
    C    Last MSSQL DBSL patchcomment DBACOCKPIT Auto-injection fails (1901875)
    C  ODBC Driver chosen: SQL Server Native Client 10.0 native
    C  lpc:(local) connection used on SCM51NUN
    C  lpc:(local) connection used on SCM51NUN
    C  Driver: sqlncli10.dll Driver release: 10.50.4000
    C  GetDbRelease: 10.50.4000.00
    C  GetDbRelease: Got DB release numbers (10,50,4000,0)
    B  Connection 0 opened (DBSL handle 0)
    M  ThInit: db_connect o.k.
    M  ICT: exclude compression: *.zip,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif,*.png,*.swc,*.swf
    I 
    I Fri May 30 05:23:53 2014
    I  MtxInit: 0 0 0
    M  SHM_PRES_BUF (addr: 0000000018410050, size: 4400000)
    M  SHM_ROLL_AREA (addr: 000007FFCB7C0050, size: 61440000)
    M  SHM_PAGING_AREA (addr: 0000000018850050, size: 32768000)
    M  SHM_ROLL_ADM (addr: 00000000098C0050, size: 632336)
    M  SHM_PAGING_ADM (addr: 000000000BA50050, size: 787488)
    M  ThCreateNoBuffer allocated 328144 bytes for 1000 entries at 0000000005600050
    M  ThCreateNoBuffer index size: 3000 elems
    M  ThCreateVBAdm allocated 17104 bytes (50 server) at 0000000002600050
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation view
    X  ES initialized.
    X  mm.dump: set maximum dump mem to 192 MB
    X  mm.dump: set global maximum dump mem to 192 MB
    X  EsRegisterEmCheck: Register EmGetEsHandles at 0000000140D4F7D0
    B  db_con_shm_ini:  WP_ID = 0, WP_CNT = 13, CON_ID = -1
    B  Table statistics is switched off.
    B  dbtbxbuf: Buffer TABL  (addr: 00000000312B0160, size: 30000000, end: 0000000032F4C4E0)
    B  dbtbxbuf: Buffer TABLP (addr: 0000000032F50160, size: 10240000, end: 0000000033914160)
    B  dbsync[db_syinit]: successfully attached to shared memory, sync_adm_p = 0000000002620050
    B  dbsync[db_syinit]: Buffer synchronisation started with
    B    sync_concept      = SEQ_NR
    B    sendon            = 0
    B    bufreftime        = 120
    B    max_gap_wait_time = 60
    B    ddlog_del_time    = 60
    B    last_counter      = 228455
    B    oldest_gap        = (2147483647,00000000000000)
    B    time_of_last_sync = 20140530052350
    B    MySysId           = 'SCM51NUN            51'
    B  dbexpbuf[EXP_SHB]: buffer EIBUF installed with
    B    semkey             = 35
    B    shmkey             = 54
    B    wp_n               = 13
    B    sclass             = 0
    B    block_length       = 256
    B    max_objects        = 2000
    B    max_obj_size       = 1948608
    B    pref_obj_size      = 0
    B    est_large_obj_size = 512000
    B    free_vec_lg        = 2001
    B    hash_vec_size      = 4001
    B    buffer_l           = 8388608
    B    max_blocks         = 30450
    B    free_blocks        = 30450
    B    mutex_n            = 4001
    B    max_mtx_wait_time  = 17000
    B    recovery_delay     = 500000
    B    tracing            = 0
    B    force_checks       = 0
    B    protect_shm        = 0
    B  dbexpbuf[EXP_SHM]: buffer ESM   installed with
    B    semkey             = 56
    B    shmkey             = 65
    B    wp_n               = 13
    B    sclass             = 0
    B    block_length       = 256
    B    max_objects        = 2000
    B    max_obj_size       = 907904
    B    pref_obj_size      = 0
    B    est_large_obj_size = 8192
    B    free_vec_lg        = 33
    B    hash_vec_size      = 4001
    B    buffer_l           = 4194304
    B    max_blocks         = 14189
    B    free_blocks        = 14189
    B    mutex_n            = 4001
    B    max_mtx_wait_time  = 17000
    B    recovery_delay     = 500000
    B    tracing            = 0
    B    force_checks       = 0
    B    protect_shm        = 0
    B  dbexpbuf[EXP_CUA]: buffer CUA   installed with
    B    semkey             = 30
    B    shmkey             = 47
    B    wp_n               = 13
    B    sclass             = 10
    B    block_length       = 256
    B    max_objects        = 1500
    B    max_obj_size       = 661696
    B    pref_obj_size      = 0
    B    est_large_obj_size = 49152
    B    free_vec_lg        = 193
    B    hash_vec_size      = 3001
    B    buffer_l           = 3072000
    B    max_blocks         = 10342
    B    free_blocks        = 10342
    B    mutex_n            = 3001
    B    max_mtx_wait_time  = 17000
    B    recovery_delay     = 500000
    B    tracing            = 0
    B    force_checks       = 0
    B    protect_shm        = 0
    B  dbexpbuf[EXP_OTR]: buffer OTR   installed with
    B    semkey             = 55
    B    shmkey             = 64
    B    wp_n               = 13
    B    sclass             = 13
    B    block_length       = 128
    B    max_objects        = 2000
    B    max_obj_size       = 907744
    B    pref_obj_size      = 0
    B    est_large_obj_size = 10240
    B    free_vec_lg        = 81
    B    hash_vec_size      = 4001
    B    buffer_l           = 4194304
    B    max_blocks         = 28373
    B    free_blocks        = 28373
    B    mutex_n            = 4001
    B    max_mtx_wait_time  = 17000
    B    recovery_delay     = 500000
    B    tracing            = 0
    B    force_checks       = 0
    B    protect_shm        = 0
    I  MPI: dynamic quotas disabled.
    I  MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
    M  rdisp/thwpsf_critical_path : -1 -> 0
    M  Semaphore recovery: keep semaphore data.
    M  logoff_check: no check.
    M  CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
    M  CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
    G 
    G Fri May 30 05:23:54 2014
    G  RelWritePermissionForShm( pLocation = 120, pEnforce = 0 )
    G  GetWritePermissionForShm( pLocation =  99, pEnforce = 1 )
    G  RelWritePermissionForShm( pLocation = 100, pEnforce = 1 )
    S  *** init spool environment
    S  TSPEVJOB updates outside critical section: event_update_nocsec = 1
    S  initialize debug system
    T  Stack direction is downwards.
    T  debug control: prepare exclude for printer trace
    T  new memory block 00000000098696A0
    S 
    S Fri May 30 05:23:55 2014
    S  spool kernel/ddic check: Ok
    S  using table TSP02FX for frontend printing
    S  0 spool work process(es) found
    S  frontend print via spool service enabled
    S  printer list size is 150
    S  printer type list size is 50
    S  queue size (profile)   = 300
    S  hostspool list size = 3000
    S  option list size is 30
    S      found processing queue enabled
    S  found spool memory service RSPO-RCLOCKS at 0000000015F100C0
    S  doing lock recovery
    S  setting server cache root
    S  found spool memory service RSPO-SERVERCACHE at 0000000015F10460
    S    using messages for server info
    S  size of spec char cache entry: 165024 bytes (timeout 100 sec)
    S  size of open spool request entry: 1376 bytes
    S  immediate print option for implicitely closed spool requests is disabled
    A  ***GENER* Trace switched on ***
    A 
    A  ---PXA-------------------------------------------
    A  PXA INITIALIZATION
    A  PXA: Locked PXA-Semaphore.
    A  System page size: 4kb, total admin_size: 46436kb, dir_size: 45852kb.
    A  Attached to PXA (address 000007FFCF260050, size 800000K, 1 fragments of 753564K )
    A  PXA allocated (address 000007FFCF260050, size 800000K)
    A  abap/pxa = shared protect gen_local
    A  PXA: checking structure sizes: 752|216|16
    A  PXA INITIALIZATION FINISHED
    A  ---PXA-------------------------------------------
    A 
    A  ATRA: pfclock execution time = 1
    A  ABAP ShmAdm attached (addr=000007DFF8D7B000 leng=20955136 end=000007DFFA177000)
    A  >> Shm MMADM area (addr=000007DFF917BCD0 leng=257728 end=000007DFF91BAB90)
    A  >> Shm MMDAT area (addr=000007DFF91BB000 leng=16494592 end=000007DFFA176000)
    A  RFC Destination> destination SCM51NUN_SCN_51 host SCM51NUN system SCN systnr 51 (SCM51NUN_SCN_51)
    A  RFC Options> H=SCM51NUN,S=51,d=1,
    A  RFC FRFC> fallback activ but this is not a central instance.
    A   
    A  RFC rfc/signon_error_log = -1
    A  RFC rfc/dump_connection_info = 0
    A  RFC rfc/dump_client_info = 0
    A  RFC rfc/cp_convert/ignore_error = 1
    A  RFC rfc/cp_convert/conversion_char = 23
    A  RFC rfc/wan_compress/threshold = 251
    A  RFC rfc/recorder_pcs not set, use defaule value: 1
    A  RFC rfc/delta_trc_level not set, use default value: 0
    A  RFC rfc/no_uuid_check not set, use default value: 0
    H  HTTP> Parameter icf/ssocookie_mandatory set to 0
    A  Hotpackage version: 21
    B  dbtran INFO (init_connection '<DEFAULT>' [MSSQL:720.00]):
    B   max_blocking_factor       =  50,  min_blocking_factor         =   5,
    B   max_in_blocking_factor    = 255,  min_in_blocking_factor      =  10,
    B   max_union_blocking_factor =  50,  min_union_blocking_factor   =   5,
    B   prefer_union_all          =   1,  prefer_join                 =   1,
    B   prefer_fix_blocking       =   0,  prefer_in_itab_opt          =   0,
    B   convert AVG               =   1,  alias table FUPD            =   0,
    B   escape_as_literal         =   0,                                  
    B   select *                  =0x00,  character encoding          =SBCS / []:X,
    B   use_hints                 = abap->1, dbif->0x1, upto->0
    M 
    M Fri May 30 05:23:56 2014
    M  ThrCreateShObjects allocated 26878 bytes at 0000000002640050
    Y  dyWpInit
    Y    ztta/dynpro_ara 800000
    Y    ztta/cua_ara    250000
    Y    ztta/diag_ara   250000
    M  rdisp/thsend_order : -1 -> 1
    M  ThISend: set thsend_order to 1
    N  SsfSapSecin: putenv(SECUDIR=C:\usr\sap\SCN\DVEBMGS51\sec): ok
    N 
    N  =================================================
    N  === SSF INITIALIZATION:
    N  ===...SSF Security Toolkit name SAPSECULIB .
    N  ===...SSF library is C:\usr\sap\SCN\DVEBMGS51\exe\sapsecu.dll .
    N  ===...SSF default hash algorithm is SHA1 .
    N  ===...SSF default symmetric encryption algorithm is DES-CBC .
    N  ===...SECUDIR="C:\usr\sap\SCN\DVEBMGS51\sec"
    N  ===...loading of Security Toolkit completed with rc 5 (SSF_SUP_NOTALLFUNCTIONS).
    N  ===   SAPSECULIB Version 5.4.28M-6
    N  =================================================
    N 
    N Fri May 30 05:23:57 2014
    N  MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
    N  MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
    M  JrfcVmcRegisterNativesDriver o.k.
    W  =================================================
    W  === ipl_Init() called
    W    ITS Plugin: Path dw_gui
    W    ITS Plugin: Description ITS Plugin - ITS rendering DLL
    W    ITS Plugin: sizeof(SAP_UC) 1
    W    ITS Plugin: Release: 720, [7200.0.500.20020600]
    W    ITS Plugin: Int.version, [33]
    W    ITS Plugin: Feature set: [30]
    W    ===... Calling itsp_Init in external dll ===>
    W  === ipl_Init() returns 0, ITSPE_OK: OK
    W  =================================================
    N  SignInit: Security Session Management cannot be used (ABAP parts are missing, note 1477428)
    N  VSI: WP init in ABAP VM completed with rc=0
    E  EnqId_Initialize: local EnqId initialization o.k.
    M  MBUF info for hooks: MS component UP
    M  ThISetEnqname: enq name = >SCM51NUN_SCN_51                         <
    M  ThActivateServer: STARTING => ACTIVE
    L  BtcSysStartRaise: Begin
    L  Raise event SAP_SYSTEM_START with parameter <SCM51NUN_SCN_51     >
    L  BtcSysStartRaise: End
    S  server @>SSRV:SCM51NUN_SCN_51@< appears or changes (state 1)
    M 
    M Fri May 30 05:23:58 2014
    M  30.05.2014 09:23:58.245 PID=2840, TID=2040 SapTimer info. v1.119 SynchCount:0 , OwnerPid: 3868, ErrsCount: 0, SapTime-WindowsUtcTime=-17 millisec (max=-17), Nosync=23 sec, SynchsPerDay=0.000000, MaxQpcTimeMinusWindowsTimeMismatch:  +0 millisec, TotalTimeCorrection=+0 millisec, QpcTime-WindowsUtcTime=-17 millisec (*)
    A 
    A Fri May 30 05:24:03 2014
    A  UpdateProfile (new settings): off,krn_impl,(no dyn check),(no logging),(no stat err),(local generation),(no commit)
    A  UpdateProfile (new exceptions): (tmp_err),(home_err),(local_err)
    A  UpdateProfile (new version): 0
    A  ***GENER* Trace switched off ***
    B  dbdynpdb2: no VERSION column found in table DYNPSOURCE
    E 
    E Fri May 30 05:24:04 2014
    E  Enqueue Info: enque/use_pfclock2 = FALSE
    E  Enqueue Info: row condense enabled
    G  GetWritePermissionForShm( pLocation = 281, pEnforce = 0 )
    G 
    G Fri May 30 05:24:05 2014
    G  RelWritePermissionForShm( pLocation = 277, pEnforce = 0 )
    G  GetWritePermissionForShm( pLocation = 281, pEnforce = 0 )
    G  RelWritePermissionForShm( pLocation = 277, pEnforce = 0 )
    E  EnqId_EN_ObjShMem_Check: status = ENQID_API_INITIAL_VALUE
    E  EnqId inscribed into initial ObjShMem: (EnqId_EN_ObjShMem_Check)
    E  ---SHMEM--------------------------------------------------------------------------------
    E  EnqId:          EnqTabCreaTime/RandomNumber    = 30.05.2014 05:23:34  1401441814 / 3208
    E  ReqOrd at Srv:  TimeInSecs/ReqNumberThisSec    = 30.05.2014 05:24:05  1401441845 / 1
    E  ReqOrd at Cli:  TimeInSecs/ReqNumberThisSec    = 30.05.2014 05:24:05  1401441845 / 1
    E  Status:         STATUS_OK
    E  ----------------------------------------------------------------------------------------
    A  EXCP> Attribute IS_RESUMABLE not found in class CX_ROOT.
    B 
    B Fri May 30 05:24:06 2014
    B  table logging switched off for all clients
    Thanks,
    krishna

Maybe you are looking for

  • E Mail Account suspended, but everything else works

    I moved from an upstairs apartment to a downstairs apartment, had my service transferred, currently have my normal cable service and internet working, however my e-mail account is suspended.  I have called Verizon about 5 or six times and been transf

  • Apple doesnt send the email to confirm my identity

    I'm trying to add another email as a user ID for my Ipad. It ask me to send a confirmation. I tried about 20 Times in the last weekend and I never never received a confirmation email to assure it´s really me. What is the problem?. Thanks

  • Why can I not restore my iPod touch?

    I updated my iPod and now it won't turn on and it says to connect it to iTunes. I connected it to iTunes and it says that I must restore it because the iPod is in recovery mode. When I try to restore it, I get a message that says "iPod cannot be rest

  • Itunes no reconoce mi iphone desinstale e instale la nueva version pero no reconoce que puedo hacer?

    actualice itune a la ultima version y no reconoce mi iphone lo desinstale y volvi a instalar y nada probe en otra pc con itunes con version anterior y reconocio sin problemas que puedo hacer

  • How to partition internal hard drive

    I have a G5 Tower with 10.4.11 installed on an internal hard drive with a single partition. In order to partition the drive I have booted from the installation disk, opened Disk Utility, and was surprised to not see an option to partition the hard dr