Capacity utilisation for audio-only37%

Capacity utilisation: Capacity-976MB.Audio-356MB.”OTHERS__620MB.Iwonder whether the software alone would occupy as much as 63% of the totalcapacity. Pl let me know the reason and ways to bring it down.

Hi,
When IT0007 is created after IT0008 creation for a particular employee, these fields remain blank.
Please maintain them manually.
Regards,
Dilek

Similar Messages

PP-work centre view-Actual capacity utilisation

Hello Experts,
We have one requirement of report to compare total capacity of a resource and actual use of the capacity,
1. Available capacity we get from r/3 data source 0pp_wccp,
      for e.g For a machine xyz, operation time is 15hrs and we have 4 no. of resource hence the capacity for the day becomes
      60hrs.
2. Now the problem is how to get the the actual utilisation of capacity, in 2LIS_04_P_ARBPL we get PO wise start time and end   time,but one batch goes through series of operations hence is there any standard way(datasource) where we can get the operation wise eventually resource/Work center wise start time and end time data so that we can get resource utilisation for a day?
thanks & regards,
Suyog
Edited by: suyogpatil08 on Oct 11, 2010 5:53 PM

take a look at the code in include RMCS0UCO in the form AT_USER_COMMAND
and FM CY_FILL_KUBEL
and include    MC65AFL1
form         LIST_KAP_UEBERSICHT
include LSP00F20 FORM SEQUENCE_CHECKSELECTOPTIONS
Edited by: Soumyaprakash Mishra on Jan 16, 2012 6:12 AM

MP3 players with bookmarking for audio bo

I am trying to find an MP3 player that is very good at playing audio books. Most MP3 manufacturers do not really address the use of their players for audio books so features that apply to books are left out of their discussions. I've found a website that tests MP3 players for audio books, but it only lists a few players?and seems behind in their testing. They do have a list of criteria that they use to approve an MP3 player; their list follows:
?Device Feature Requirements
. Must be able to play secure or protected WMA files: Windows Media Audio (WMA) is an audio compression format similar to MP3, but with built-in digital rights management (DRM) for copy protection and usage restrictions. The DRM used by NetLibrary eAudiobooks controls expiration of your eAudiobook, so that they will expire at the end of the borrowing period.
. Must be able to play a WMA file with a minimum bit rate of 32 Kbps
. Must be Windows 2000, XP or Vista compatible
. Must be compatible with Windows Media Player version 9 (WMP v9) or higher: This is used for transferring or synchronizing files to the device.
. Must have [On/Off] resume, pause/resume functionality, or true bookmarking: These features enable you to return to your place in the book. The least desirable?alternati've is to fast-forward to find your place in the book each time you resume reading.
. Must have an LCD time display of either HH:MM:SS or MMMM:SS: These time display formats allow the device to play and handle long tracks or files. The time display is also important when returning to a designated place in the book.
. Must have a minimum of 52 MB of storage
. Must pass the NetLibrary Long Play Standard: The device must be able to play a track with duration of 8 hours or longer (file size usually 256 MB or larger).
I guess one of the key features is the [color="#ff0000"]bookmarking option so that you can continue a book where you left off. Can you recommend some MP3 players that meet the above requirements?One to?5 MByte should be plenty of memory, we don't need a lot of storage capacity because we only borrow (check out) the books from our local library. Thank you.
Message Edited by bookman on 2-9-200602:04 PM

but by taking away those features, the new creative players are now very similar to idiot pods. albeit more reliable. the one edge creative had was superior audio quality through eax. losing that is a big mistake in my opinion. the audio quality is probably?still better, but not by as much anymore.

Capacity indicator for iPod in iTunes:

With iTunes open and my iPod connected, when I select Devices: What in the world is the "Other" (Orange bar) showing in my iPod "Capacity" bar? I have a iPod nano 2GB software version 1.3.1. I have 135 songs (Blue bar for Audio) and 225 photos (Yellow bar for Photos). But what in the world is the Orange bar (671.4 MB) indicating??????????????????????????????
RSVP <edited by host>

The storage space taken up by "Other" can be made up of, notes or files of any kind you've added to the iPod whilst using it as a hard disk or album artwork. Or sometimes when the iPod data base has become corrupt.
There will always be a few MBs of used space under "other" but if it's in GBs it's unusually large. This often happens when the iPod data base becomes corrupt.
If the iPod is enabled for disk use, you can look at the folders on the iPod through Explorer or Finder and delete anything you don't want.
If it's a corruption it will probably need to be restored, see how to restore the iPod to factory settings which will erase the iPods contents and reclaim the used space.
Then reload the music from iTunes.

Unable to select 'Use Phone for audio calls' on Cisco Jabber Client 9.6 for Windows

Hi,
I have recently deployed Cisco Presence Server and integrated with Call Manager 9.1.2. I have successfully deplyed 6700 users on IM & Presence. Some of the users requested for Cisco Jabber with phone control.
I have added CFS client on the Call Manager and associated it with the same extension numbers from their desk phones. I am currently able to make audio and video calls for these specific users. I am currently using Cisco Jabber Client 9.6 for windows. I have users both daisy chained to their desk phones and who are not. Can you please confirm if it does make any difference.
Problem Faced -
I am not able to use to option use phone for audio calls. The phone comes down with a cross sign on it. At the same time Cisco Jabber by default uses the client and it works as expected.
Can you please let me know if any of you guys have faced a similar issue.
Please let me know if you need any information regading the configuration used.
Looking forward for your valuable comments.
Thank you.
Regards,
Joseph Chirayath.

Hi Will,
I am attaching the screen shot for the END USER on CUCM 9.X that has been configured on Cisco Jabber.
Please do let me know if you need any further information.
Thank you.

New macbook Pro setback for Audio Production.

the new macbook pro don't come with a Firewire 400 port anymore.
everybody knows that usb is too slow for audio transfer and Firewire 800 is usual.
audio interfaces that use firewire 400 can't be used and with only one firewire 800 port there's no room left 'cause we need that to connect the external drives with audio files.
most interfaces need to be connected directly to the computer.
Any Ideas????

I, too, have an issue with the port configuration on MBPs -- too many USB2.0 ports, not enough FW800 ports. Nevertheless, please note that:
1. Bilingual FW800 FW400 cables (really good ones) are available for less than $20.
2. You can daisy chain external FW HDDs (even heterogeneously, i.e. you can cable your computer to a FW800 device using a FW800 cable and then use a FW400 cable to connect the first drive to a FW400 HDD, etc.). This capability is dependent on having redundant or multi-protocol drive enclosures (that is, you will need drives that have at least two FW ports, such as two FW800 ports or a FW800 port plus a FW400 port, not just a single USB2.0 port).
3. You can go hog wild and purchase a full-on FW800 hub/repeater like the NitroAV Professional Firewire/1394b 8-Port device (google it). I use this device to connect five external HDDs to my MBP (four FW800 drives and one FW400 drive). This hub will set you back $150 -- not trivial, but an elegant solution if you use multiple drives, and it comes with the AC power adapter (believe it or not, some hub manufacturers require you to purchase the AC adapter separately). In my configuration, six ports are used -- five for the drives and the sixth to connect the MBP via a FW800 cable. The hub has the additional advantage of eliminating several of the cables that would otherwise connect directly to my computer, which is, after all, a laptop; the fewer things I have to connect/disconnect when I move my MBP around, the better. You can think of this as a do-it yourself version of the docking station that Apple forgot to give us, at least as far as drive connectivity is concerned!
As an aside, my MBP (see model notes below) does in fact have both a FW800 and a FW400 port. I wish Apple configured unibody MBPs to include two USB2.0 ports and two FW800 ports -- but the above tips make the world right.
Finally, I just don't get the gripe about cabling costs. The unibody MBPs are high end laptops -- most purchasers will have invested well over $3K in their machines. There are a thousand usage patterns; I would much rather buy what I need for my applications without incurring the expense of purchasing bundled stuff that I don't need and which winds up in a (bursting at the seams) cable/doodad drawer.

Changing Capacity Utilization for selected days before and after a CTM Run

I have a number of resources with their respective capacity utilizations. I am running CTM which requires the resource utilizations for all the resources to be at 100%.
Can I do that with 2 capacity variants for the resource with 100% and X% utilization and switch them as and when required. My Problem is that when i create a capacity variant from say date A to date B .. the period between these comes as blocked. Is there a way to correct this.

Request you to go through help documents
http://help.sap.com/saphelp_scm41/helpdata/en/92/a57337e68ac526e10000009b38f889/content.htm
http://help.sap.com/saphelp_scm41/helpdata/en/2e/847337613fbc40e10000009b38f8cf/frameset.htm

How can I make Apple Earphones be the Input and Output for Audio

I have some older headphones and they aren't compatible with a Mid 2010 (Intel Core i3) 21.5 Inch iMac
Is there some way to make Apple Earphones be the Input and Output for Audio in the iMac
This is a problem for me personally as when I am talking to someone on Skype the iMac picks up the In-built Microphone audio, and yes the headphones I'm using do work straight from the iMac as audio output
Any help is appreciated

you can connect the headset to something like this
http://www.ebay.com/itm/NEW-MaelineA-3-5mm-Female-to-2-Male-Gold-Plated-Headphon e-Mic-Audio-Y-Splitter-/381100440348
and then connect the mic to the input and the headset to the headset port

Can I use the new Apple TV without a display for audio streaming only?

Here's my situation...
I have an Airport Express in my living room connected to my DSL modem to create a wifi network. I also have a current model MacBook Pro and would like to add an Apple TV to my bedroom system for music and Netflix audio streaming. I do not own a TV to do any setup.
If I bought an ATV for my bedroom and connected the optical output to my DAC, would I be able to accomplish my goal or is there a setup procedure on the ATV which mandates a display?
I realize I could just buy another Airport Express for easy audio streaming, but then I wouldn't have the Netflix audio capability which I would like since I watch movies on my MBP. I'm hoping like an Airport Express, the ATV would configure itself for audio streaming once connected to my wifi network.
Thanks for any help or ideas.

If you're planning to stream from iTunes to the AppleTV controlling the material via iTunes, I suspect it may just appear as an Airtunes speaker option for iTunes without any setup needed.
No Netflix in UK so don't know much about it, but I suspect you'd need to control the AppleTV directly for this unless you were viewing on the MBP and used something like Rogue Amoeba's Airfoil to transmit audio.
If you have no desire for controlling AppleTV either on an TV or using Remote app for iPhone etc (and you'd need to set AppleTV up with a TV for Netflix or AppleTV controlled streaming anyway), you might want to consider using another Express upstairs and hook it's optical out to your DAC if you're just after stereo audio.
AC

With 10.2 I can only use system speaker output for audio, NOT my RME FF400 I used previously. The FF400 works fine with other apps. How can I set this device in FCP 10.2? (it is set in both system preferences and midi)

With 10.2 I can only use a system (e.g. speaker) output for audio, NOT my RME FF400 I used without any problems previously. The FF400 works fine with other apps (some like TwistedWave) setup in the program, and others (like Spotify) using system preferences & audio midi setup. How can I set the FF400 to be the sound output device in FCP 10.2? N.B. The FF400 is set as sound output device in both system preferences and audio midi setup.

From the fcp.co forum. See if this does anything for you.
simon_hutchings
OFFLINE
Junior Boarder
Posts: 24
Thank you received: 5
Karma: 1
I have the solution! Well it at least worked for me. This is the response I got from Apple, Can you please try the following steps towards fixing your audio issue, and report back with your results?
1. Open the application Audio Midi Setup (located in Applications : Utilities)
2. Select the Output Tab for the current output device
3. Select the Configure Speakers option
4. Select the Multichannel tab
5. Change the setting to Stereo Now mine was set to stereo but the left channel wasn't showing left. re-clicking on stereo reloaded the settings and after clicking apply it worked.

How to use a bluetooth cellphone for audio input and output

Hello, I was wondering how to set-up my Mac Book so that I can use my bluetooth cellphone for audio in and audio out. Ideally, I would like to use my handset for talking on iChat and Skype. Has anyone had any luck doing this? When I bond my cellphone these optiosn do not appear. I know that this is easy to do on a Windows machine but I am not sure about how to do it on my Mac Book.
Thanks!

Yes it should do what you want.
Go to "Audio Midi Setup", and go to the Audio menu and click "Open Aggregate Device Editor". The interface is pretty simple but if you do get stuck, just use the help function in Audio Midi Setup, as it has a step by step guide.
Then when you return to logic, go to the Preferences>Audio>Drivers section and select Aggregate Device as the new driver rather than either the built in sound or the tascam. Then the inputs and outputs will apply to BOTH devices.

Error while updating default media player for audio files??

Ever since I received a replacement iPod Nano for my original through the AppleCare program, I frequently get the following message while syncing podcasts:
"An error occurred while updating the default player for audio file types. You do not have enough access privileges for this operation."
How can I correct this problem?
HP Pavilion zv6000 Windows XP Athlon 64 Processor 4000+

Check out this thread for a possible resolution to your problem: http://discussions.apple.com/message.jspa?messageID=6825681

My remote cd says: The operation can't be completed because the original item for "Audio CD" can't be found.

I'm trying to access a cd (book) from my macbook air 10.7.8
using another macbook on the same network
In my System Pre. I don't see 'sharing cd or dvd'
when I tried to download the software it said
that I already have a newer version.
I see the remote cd on my finder but when I click on the cd it says:
"The operation can’t be completed because the original item for “Audio CD” can’t be found.

Hi,
I've started to get this problem too. The only place I can't create a folder is on the desktop - other folders/locations are fine.
When I do "new folder' it first asks for the password and then fails with the "you do not have the necessary permission" message. I'm using the only user account that has been created on the Macbook Pro since it was installed. It is defined as an Admin account.
I've tried reseting the Permissions and ACL using the Terminal program after interupting a re-boot. That didn't have any affect though. I also tried changing the privileges by right clicking on the desktop and going in via Get Info...again. either I'm doing it wrong, or its not working.
Apols if this is an easy Question - the Macbook is for my son and I'm an OSX numpty (having used Windows more ;-)
Thanks in advance.

My iphone4 recently stopped working in my car and no longer asks for audio sources. It is paired and turns off the radio when a call occurs but does not utilize the speakers or mic in the car.

My iPhone recently stopped asking for audio source in car and no longer works through the speakers. It pairs with the vehicles just fine, turns off music, but I must use the actual phone to communicate. What happened?

The same problem I have today afternoon.
My car audio system is compatible with iPod USB connector and worked fine for also 6 months.
When connecting my iPod nano 6rd gen via USB to car audio system, iPod displays on its screen a sucessfull connection, and music tracks is successfully displayed on the car audio system. But do not play. Switch forward or backward by playlist (by the buttons on the car audio system) works also, but still there is no start playback.
I tried plugged my iPhone 5 via USB to car audio system - it's works fine.
I plugged iPod to my mac computer - itunes says it's all Ok.
I am confused and do not understand what is happening.
May be restoring to default factory settings iPod....

Premiere and Media Encoder CC with Cineform(converted files have static for audio)

Hi there,
using Media Encoder CC to convert 7D and 5DMKIII video files to Cineform .avi and all I'm getting at the other end for audio is loud static. Video is fine but audio is corrupt. Anyone run into this with CC? I didn't have this problem before CC.

Do you have the same problem with other AVI codecs? What about non-AVI options?

Capacity utilisation for audio-only37%

Similar Messages

Maybe you are looking for