Capacity Utilization Reports no data

Hi all, starting a new thread as none of the similar threads have been able to resolve my issue.
We have System Center 2012 SP1 on Server 2012, SCOM VMM, SM, Orchestrator, App Controller etc.
When I run the Capacity Utilization report I only have data returned for PIF, Net transfer, Capacity Utilization and Dick IO all return;
No data available. Possible causes include::
The performance rules for the report have not been enabled in the VMM Reports MP.
No computers match your selection criteria.
I am adding the Hyper-V host to the report, I have also added the Windows server objects to the report.
The SCOM host has the execution policy set to Unrestricted as per one post I have found. Pro Tips do work when tested.
I did find this blog :
http://blogs.technet.com/b/rexzh/archive/2013/08/20/scvmm-2012-sp1-capacity-utilization-report-missing-data.aspx
But where do we locate the stored procedures?
If I look at the monitoring views I see performance data against the Hosts.
Please assist

Hi,
Please run the following command on the management server.
set-executionpolicy Unrestricted
If the issue persists, I suggest you post in VMM forum to get more insights.
http://social.technet.microsoft.com/Forums/systemcenter/en-US/home?category=virtualmachinemanager
Niki Han
TechNet Community Support

Similar Messages

  • Capacity utilization report (Labour)

    Hi
    We are developing workcenter capacity utilization report.
    We have taken available capacity from KAKO table and function module.
    Actual finished set up hrs we are taking from AFRU -ISM01/ILE01
    My issue is for capturing confirmed set up hrs AFRU is the correct table or any other table is there.
    when i am testing some production orders set up time values are not flowing into the developed report.
    In which table we can see confirmed set up/processing times etc.
    regards,
    srihari.M

    Dear
    Check the Work Centre assingin in the operation overview screen -then double clcik on this -Goto Work Centre Basic data Tab -Check the Standrda Value Key -Stndard value drives the three Setup , labout , machine to be entre or must be entred or not .
    If Rule for maintainec is not for Set up , then this will not come up in Confirmation screen also and hence in  your customised report .Or you may be having Set up hrs which have not confirmed yet .Based on this SVK , you will choose the Formula key for Scehdule , capactiy and also Csoting tab to calcuate the same.
    Check this and come back
    regards
    JH

  • Resource capacity utilization report

    Hi,
    Is there any standard report for Resource capacity utilization after SNP run.
    Any standard extractor/data source is available to build the report?
    Regards,
    Krunal

    Hi Krunal,
    1) The report /N/sapapo/cdps_rept should be sufficient...use the selection restriction to 'restrict ' by Rosurce,Time period--In the output ofthe report,yuou would see 'bucket consumption',relatively on the Right side..
    2) I would urge you to read the note:1296446 too
    Thanks and Regards
    Suresh

  • Report for calculating capacity utilization and Efficency

    Hi,
    We are following REM in our company. The production line is defined in the production version. While backflushing the production line is called automatically and hence backflushing is done.
    We calculate the capacity utilization by using the formulae.
    Capacity Utilization = (Backflushed Qty/ Available capacity)*100.
    My queries are:
    1. Is there any standard report to determine the capacity utilization of a production line.
    2. Is there any standard report to calcualte the efficency of a production line.
    waiting for reply.
    With regards,
    Afzal

    Hi afzal
    1. you have mentioned ; Available capacity = Std.time per piece * no. of working hrs
    Let me explain with example
    suppose per piece if it takes 10 mins, now according to your formula
    A.C = 10* 24 * 60 = 14400 per day, but which is not correct
    normally if 10 mins/ peice means 6 peices/hr and for 24 hrs 24*6 = 144.
    so it must be A.C =  no. of working hrs / Std.time per piece.
    2. You have mentioned = capacity utlilised = total Backflushed qty per day., which means you are caluculating capacity utilization based on input material.
    3. Utilization = (Avaliable capacity/ Capacity utilised) * 100
    suppose let  us consider Available capacity per day =100
    capacity utilized = 50
    Utilization = (100/50) * 100 = 200%, which is not correct it should be only 50%
    Here my main doubt is why You are caluculating capacity based on input material.
    Please explanin  me you business process and whats the exact requirement so that I can help you out.
    Please check the formulae

  • Storage bin Capacity utilization is greater than 100%

    Hi,
    Via LS03N, I can found that some capacity utilization is greater than 100%, this must be incorrect, what's the reason? is there any report to update the capacity utilization for storage bin?
    Kindly please advise.
    Thanks

    For the capacity checks, the remaining capacities or the used weight in the storage bin master data are updated with every putaway or picking. If you change the inspection method in the current operations or you change capacity or weight data of materials or storage unit types, you then need to make a comparison of the data. You can make this comparison with report RLS10200. First read the documentation before you start the report.

  • CTM - 15454 reporting report utilization reports needed

    I have many Cisco ONS 15454's deployed, and I need a way (I presume from CTM) to
    run reports to show
    1 - Circuit utilization (how many STS-1's and for which clients are provisioned on all spans)
    2 - Capacity report (how much capactiy in STS-1's are available on all spans)
    It is too time consuming to manually export circuits provisioned from each span when the
    network changes constantly, and the number of nodes too.  This leads to constantly out
    dated spreadsheets and inacurate data on capacity, utilization.
    Basically I need to run reports against all things circuits on the ONS boxes.
    I would be willing to use 3rd party software too, which would talk with CTM I presume?
    Who else has this issue?
    --Scott

    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-parent:"";
    mso-padding-alt:0in 5.4pt 0in 5.4pt;
    mso-para-margin:0in;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:11.0pt;
    font-family:"Calibri","sans-serif";
    mso-ascii-font-family:Calibri;
    mso-ascii-theme-font:minor-latin;
    mso-hansi-font-family:Calibri;
    mso-hansi-theme-font:minor-latin;
    mso-bidi-font-family:"Times New Roman";
    mso-bidi-theme-font:minor-bidi;}
    Hello Scott,
    You may automate this by directly querying and parsing Oracle CTM database. I don’t have a ready to use script but here is an idea.
    For example link utilization is kept in Link_Utilization_View and links are kept in Link_Table.
    Database Schema Tables
    http://www.cisco.com/en/US/docs/net_mgmt/cisco_transport_manager/9.0/db_schema/developer/guide/90sctbl.html#wp2576140
    Database Schema Views
    http://www.cisco.com/en/US/docs/net_mgmt/cisco_transport_manager/9.0/db_schema/developer/guide/90scview.html
    Here is how to get this information is html formatted file:
    su – oracle
    sqlplus ctmanager/ctm123!
    SQL> spool /tmp/links.html
    SQL> set markup html on
    SQL> select * from link_table;
    SQL> select * from Link_Utilization_View;
    SQL> set markup html off
    SQL> spool off
    Now the information is in /tmp/links.html which you can parse.
    En example from my net. let’s take a span between Node 14 port 6/1 and node13 port13/1:
    bash-3.00# su – oracle
    Blowfish% sqlplus ctmanager/ctm123!
    SQL*Plus: Release 10.2.0.3.0 - Production on Thu Nov 4 14:33:51 2010
    Copyright (c) 1982, 2006, Oracle.  All Rights Reserved.
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
    With the Partitioning, OLAP and Data Mining options
    SQL>select LINKID from Link_Table where LINKNAME='Node14:6/1 - Node13:13/1';
        LINKID
            35
    SQL> select CKTTYPE,CKTSIZE,CKTUNIQUEID,CKTNAME from Link_Utilization_View where LINKID='35';
       CKTTYPE    CKTSIZE CKTUNIQUEID CKTNAME
             1          1          11 BRT
             1          1          11 BRT
             1          1         114 Link2
             1          1         114 Link2
    ======================
    CKTTYPE 1 is STS_CIRCUIT and CKTSIZE 1 is STS1 (from Database Schema Tables). Hence i have 2 STS1 circuits on that span.
    Regards,
    /A

  • Tcode for display of capacity utilization

    Gurus,
    can u please supply me with the t code for display of capacity utilization at all work centres at plant level. I also need scheduling reports.
    Thanks

    Hi
    In CM01 ,enter work center and plant.click on standard overview.You get week wise(you can change settings as per your wish day wise/month wise also)requirements,available capacity ,capacity load and remaining available capacity.
    select one period and click on capa details/ period .The report shows tha materials, scheduling dates and pegged requirement qty.
    Regards,
    Rajaram.K

  • Create a site utilization report for SharePoint Site with these conditions

    HI,
    How do we create a site utilization report for a SharePoint 2007 site. I want to include the following conditions in the report
    a) The list of users who are accessing the site
    b) The list of users who have not accessed the site ( Can we do some filtration based on some conditions )
    c) When was the last date the user has accessed the site

    Hi Kalpana,
    Sorry for delay in reply. I don't think this can be possible from front end without involving SQL dbo users table. If you found any other alternate please share here.
    You can get site collection / sub site user details via
    SP user manager tool and for last access date - time you can use SharePoint object model. - ref : http://blogs.msdn.com/b/varun_malhotra/archive/2010/05/12/moss-2007-get-last-accessed-date-for-a-site.aspx
    Let us know if this helps
    Regards,
    Pratik Vyas | SharePoint Consultant |
    http://sharepointpratik.blogspot.com
    Posting is provided AS IS with no warranties, and confers no rights
    Please remember to click Mark As Answer if a post solves your problem or
    Vote As Helpful if it was useful.

  • Resource Capacity Utilization Question

    Hi, Please let me know if the following scenario is a possibility.
    We currently maintain our capacity utilization at 90% for any resource and the same number is carried over to APO with CIF. The requrement we have is to set this utilization to 100% for the rolling current date+3 months and 90% outside the 3 month horizon. I know that the dates can be specified explicity but I don't know if the rolling 3 month is possible. Please let me know if this can be achieved via config.
    Thanks in advance.

    Dear ,
    I would request you to post the thead in  SDN APO forum  .
    I do not think so  there is a scope of this requirement  in SAP R/3 but APO PPDS  can give you a solution for the same .
    Regards
    JH

  • Changing Capacity Utilization for selected days before and after a CTM Run

    I have a number of resources with their respective capacity utilizations. I am running CTM which requires the resource utilizations for all the resources to be at 100%.
    Can I do that with 2 capacity variants for the resource with 100% and X% utilization and switch them as and when required. My Problem is that when i create a capacity variant from say date A to date B .. the period between these comes as blocked. Is there a way to correct this.

    Request you to go through help documents
    http://help.sap.com/saphelp_scm41/helpdata/en/92/a57337e68ac526e10000009b38f889/content.htm
    http://help.sap.com/saphelp_scm41/helpdata/en/2e/847337613fbc40e10000009b38f8cf/frameset.htm

  • Capacity utilization rate (percent)

    Experts,
    If I set up a shift 6:00:00 to 14:00:00:00, length of breaks 00:30:00, cap. util. 100% I get 7,5 hr Operation time / Capacity.
    If I reduce the cap. util. to 80% and leave the start-, end- & breaktimes as they are I get 6,0 hr Operation time / Capacity.
    My question is how does the reduced operating time influences the start and end times/dates in regard to scheduling ?
    I am Looking for the logic behind.
    Thanks in advance
    Jörg

    Jorg,
    Capacity utilization is more frequently used with referance to viewing available capacity against requirements on CM01 screen.
    It helps determine if there will be a capacity overload due to capacity inefficiency.
    For ex. On Cm01 screen for Work center say W1, if a production order requires 7.5 hours to complete an operation on W1
    & if Cap ultil=80% at W1, system will show that order with RED overload view as available cap is reduced to 6 hours.
    However if your using finite scheduling then this cap util rate would be cheked to determine scheduling.
    You control the capacity availability check and the finite scheduling with the help of the overall profile that you entered in Customizing for the availability check.
    Hope this gives you some insight on this concept.
    thanks,
    Ram

  • Capacity Utilization

    We are in Repetitive manufacturing scenario and looking for capacity utilization for past period.
    Please guide preferably with example.

    Hello
    In CM01 itself u can view capacity details of past. In the standard overview screen , goto settings->general -> put start date with negative sign (like 30 -) . Now u can able to see capacity in past.
    However some limitation is there to select the period in past.
    Pradeep

  • Capacity Utilization by network activity for each period

    Hi all,
    How do i find out the capacity utilization at the network activity level. My requirement is to findout the remaining requirement/capacity of a workcenter for each period, which will be the cumulative value of the non utilized resources/hours for the previous months, based on distribution key.
    The same functionality is there in CM07, but what is the exact functionality and how it can be reimplemented in a report?

    Hi,
    Check if table KAKO helps. You may have to calculate the remaining capacity from available and utilised.
    Regards

  • LMS 4.2.3 Query on Interface utilization report

    Hi All,
    Interface Utilization report displays the interface utilization data for each device polled for the Interface Utilization
    template. The information is presented using the percentage specifier.
    For eg its displayed % (Rx Max%,Rx Avg%,RxMin%,
    Tx Max%,Tx Avg%,TxMin%)
    I wants report should have the data(interface utilization In Bytes of data)
    Can we display the data instead of the percentage?? is it possible ???
    Regards,
    Channa

    Hi Channa,
    log into dbreader using the following::
    http://servername : 1741/dbreader/dbreader.html
    or
    https:// servername : 443/dbreader/dbreader.html
    user Id is DBA
    Database Name is upm
    password :: user defined (by default password is c2ky2k)
    1.       Here is the query to get the pollerwise managed MIBObjects:
    "select count (*), PollerName from Poller_Details_Table a,Poller_Definition_Table b where a.PollerId = b.PollerId and b.Poller_State NOT IN (1) Group by b.PollerName;"
    2.       Here is the query to get the total mibobject count for the active pollers
    “select count (*) from Poller_Details_Table a,Poller_Definition_Table b where a.PollerId =
    b.PollerId and b.Poller_State NOT IN (1);”
    Hope it will help
    Thanks-
    Afroz
    ***Ratings Encourages Contributors ***

  • Prime Infrastructure (2.0) utilization report on port group possible?

    Hello
    I want to create an interface utilization report for a specific port group in PI, but can't see how to do that in the report setting. You only seem to be able to select a specific device or site rather than port group. Is it possible? Also, is it possible to put that on a dashlet?
    thanks for your help

    Thanks for that Mahavir
    Yes, I worked that out a little while ago, and can now see interface utilization by port group on the Performance > Network Interface page. I do have another question however (well two)....
    I wanted to add graph over time for the utilization to the detail dashboard, but nothing shows up, even though I see the utilization in the network interface page, so I'm sure the monitoring is deployed. Why is the data missing from the graphs?
    Also, I wanted to see interface packets per second graphs, but see that is not part of any default template, so I created a customer SNMP template from the IF-MIB to do this, but I can only deploy that against sites/devices or a list of interfaces, and not port groups. Why can't I deploy a customer SNMP template against a port group?
    thanks for your help

Maybe you are looking for