Capacity?

The capacity bar in iTunes consists of audio, video, other, and
free space areas. I have 5.11 GB of other and i do not know what it is. Does anyone know how to find out what all my other files are?

I am having this same probelms w/ itunes and an iPod nano. I have over a gig of "other" and I have no idea what it is or how to clear it.

Similar Messages

  • New to Fios: Schedules Recordings and DVR Capacity

    I just gave up on RCN in lieu or Verizon Fios and thus far - can't stand the dvr.
    1) The capacity is no where near what RCN's was. I had days worth of TV, movies, etc saved and never ran out of space. With Verizon, it's been less than a week and I`m already half full. I don't have a HD TV, but I`m wondering if my lack of space is caused by the recorder taping in HD. How do I check this setting to ensure that everything being recorded is standard definition?
    2) The Verizon DVR is really bad at only keeping two episodes of a show, and only recording new/first run shows. Is there any setting to make this work better? I tried to set it to record first runs only of the show scrubs, on any channel (i wasnt sure what channel the new ones are run on) and in two days it taped 10 episodes...

    The FiOS DVR has the same 160GB capacity as the RCN DVR.
    SD channels are 0-499 and HD channels are 500+.  All the SD local channels can be found under 50.
    Recordings from HD channels consume 3-6x the capacity of SD channels.
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.

  • Report for calculating capacity utilization and Efficency

    Hi,
    We are following REM in our company. The production line is defined in the production version. While backflushing the production line is called automatically and hence backflushing is done.
    We calculate the capacity utilization by using the formulae.
    Capacity Utilization = (Backflushed Qty/ Available capacity)*100.
    My queries are:
    1. Is there any standard report to determine the capacity utilization of a production line.
    2. Is there any standard report to calcualte the efficency of a production line.
    waiting for reply.
    With regards,
    Afzal

    Hi afzal
    1. you have mentioned ; Available capacity = Std.time per piece * no. of working hrs
    Let me explain with example
    suppose per piece if it takes 10 mins, now according to your formula
    A.C = 10* 24 * 60 = 14400 per day, but which is not correct
    normally if 10 mins/ peice means 6 peices/hr and for 24 hrs 24*6 = 144.
    so it must be A.C =  no. of working hrs / Std.time per piece.
    2. You have mentioned = capacity utlilised = total Backflushed qty per day., which means you are caluculating capacity utilization based on input material.
    3. Utilization = (Avaliable capacity/ Capacity utilised) * 100
    suppose let  us consider Available capacity per day =100
    capacity utilized = 50
    Utilization = (100/50) * 100 = 200%, which is not correct it should be only 50%
    Here my main doubt is why You are caluculating capacity based on input material.
    Please explanin  me you business process and whats the exact requirement so that I can help you out.
    Please check the formulae

  • Features I would like to see in Capacity IQ

    Hi all,
    I am currently implementing Capacity IQ in our virtual environment and I encounter some issue's. I know some probably will be solved by VCops however it is yet uncertain whether we will purchase that software.
    - I have 4 vCenters, so I need to log into Capacity IQ 4 times. This makes it hard to provide a Capacity Plan for over all my resources.
    - I have multiple hardware platforms in the same vCenter. Sometimes my managment would like to know what the remaining capacity is on a specific platform. I cannot select multiple clusters, so I need to provide a forecast myself.
    - Capacity IQ does not provide the intelligence for performing a what-if analysis on datacenter level.
    - Some of my clusters function as a DR test-cluster. Never running any machines only during the DR-test, which are scheduled frequently. I would like the option to exclude clusters in Capacity IQ's trend analysis. This way the DR-test does not mess up the trend analysis.
    - I cannot enter a custom account to schedule reports with(workaround logon to vCenter and schedule)
    - I need the reports to be written to a NFS/CIFS share somewhere, so I can serve them from there and anyone can go look for themselves.
    Any ideas with regards to these issue's are much appreciated!
    Regards,
    Ad

    have you follwed this link ?
    http://www.vmware.com/pdf/vmfs-best-practices-wp.pdf
    please award points if you see fit.Thanks

  • Since downloading ios5 on my iphone 4 the capacity guage in itunes shows other as over 21Gb and i can no longer fit any music on it. How do I get rid of the other stuff? other

    Since downloading ios5 on my iphone 4 a few days ago, the capacity guage in itunes shows "other" as over 21Gb and i can no longer fit any music on my iphone.
    How do I get rid of the other stuff?
    capacity available on 32 Gb iphone is 28.49Gb
    i previously had 21.97 Gb music, over 6 Gb photos, about 1Gb of apps, and minute amount of audio
    now i have no music, 5.4 Gb photos and similar (0.8Gb) for  apps and audio. i have deleted heaps of photos and unused apps to try to make space but obviosly this is a much bigger problem. I also created a smaller music folder on itunes to sync to but at present no music is selected for syncing due to the lack of available space.
    i have 15Gb icloud account now also which is about half full.
    Ive done a little research and heard similar tales but with much smaller other totals than this. Can you help?
    i cant update my apps as i get a message saying i do not have enough available space.

    I had the same problem today and was able to resolve it without having to do a restore or reset. The problem had something to do with my mail accounts. The upgrade reset my mail settings, switching both my gmail and my .mac mail to "archive all mail". I went into the General Settings, disabled that setting, and resynced the phone. The "other" storage allottment dropped back down to less than a gig.
    Before you restore or reset, I would try that first.

  • Suggestion for a new macbookair flash storage capacity for dual OS

    I'm planning to buy my first MBA. I'll work using logic pro and office for mac. But I also have one app that need run on win7. This app size is max 200mb.
    To keep my final working file, I plan to buy external storage.
    My question, looking at my work needs, pls advise what is the ideal flash storage size I should pick ? Is it 128, 256 or 512Gb ? Ideal for me means, not overcapacity flash storage.
    Tx all

    Hi Dikanug,
    Out of interest, so I can further select the best capacity of Flash Storage, how many document do you plan to save on the computer using Office and how often are you going to use Logic Pro?
    This will help determine the best capacity.
    Obviously the Logic Pro files will need to stay on the Mac however it is probably cheeper to have a Small Flash Storage and store any file that does not need to be on the actually Macintosh Drive, stored on a large external Hard Drive with files such as Office files.
    Obviously the Logic Pro files will be anywhere from 10mb -up and therefore this will be needed to be taken into consideration when purchasing the Flash.
    Just for your sake: 14 tracks of audio, 10 of which are drums and a song that is about 5 minutes long, could be at least 25mb in file capacity.
    Remember once you have bought the device you cannot make the capacity bigger and thereofre it is better to have more than not enough however do not waste your money if you do not need it.

  • Goods receipt Capacity check in PO creation- EHP2

    Hi
    I have activated business function LOG_MM_CI_1 in our ECC 6.0 system . I have also activated Goods receipt capacity check and subsequent settings in customization . I am able to view the GR capacity check icon in Purchase order creation (ME21N). When I click this icon by selecting the line item , system does not perform any function . I have read in SAP documentation that Vendor can be assigned to door . I am not able to find this assignment in the system . Not sure whether this function is only applicable to retail system and not to SAP R/3 . If some one worked on this functionality , kindly request you to throw some light on this functionality .
    with regards,
    Joseph Anand B

    Same thing is happening to me right now .. did you found out what the error was,, or what was missing ?
    Please reply soon as I have a demo on the same in two days..
    Regards
    Digant.

  • Product Group capacity can not be seen in MF50 output

    Dear All,
    I can not see the product group in 'total capacity' subscreen in output of planning table MF50.
    In MF50 the input parameter i am entering is product group and plant.
    In the scheduling tab of input parameters detailed scheduling and capacity planning is tick.
    For some product groups i can see in output as "Product Groups / Total Capacity" and also in the rows below it shows "Prod.Grp XYZ" then requirement and available quantity rows. After which the production line rows follows.
    For some product groups when enter in initial selection screen of MF50 with same input parameters in output i do not see Product group but i can see "Total Capacity Data" and then the rows starts with production lines. But no information on capacity of product group.
    The setup of all product group is same and are created with MM01.
    Regards,
    Vero.

    Hi Rupesh,
    Thanks for reply.
    In 'Control Tab' i am not selecting any parameter. So in output i can see all materials  in 'Material Data' section which are included in product group  irrespective of requirements.
    I have issue in upper half section of 'Total Capacity Data'. I can see the different production line rows with Requirement / Available rows with capacity values in each period. Unit is %.
    But i do not see 1st row for Product group row with 2 subsequent rows (requirement / available) with unit KG.
    I can see these rows only for some product groups but not for all.
    For the product groups for which i do not see these rows have capacity requirement in selected periods which can be seen in same output in production lines rows. (where selection in input screen is product group and plant)
    Regards,
    Vero

  • IMovie '08 Capacity Full and Cannot Transfter DVD's into Macbook

    I recently purchased a 13" Macbook Unibody off eBay. The unit is in good shape and the previous owner has installed a Zagg Invisible Shield over the entire Macbook and the battery holds a full charge. I bought the Macbook to use editing some old VHS footage I had converted to DVD.
    When I try to import a DVD to my desktop so I can edit it using iMovie '08, I get the error "Unable to create 'DVD Video Recording.dmg' (Input/Output Error). At the bottom of the screen it says DVD Video Recording Capacity 2.1 GB
    Avaiable 0 Bytes
    Used 2.1 GB
    Number of Files 4,293,886,887
    The Space Utilized indicates: 20.09 GB and Space Free: 277.69 GB. When I received the Macbook I inserted the Applications Install DVD and entered my personal info. I thought this was the clean install you are referring to?
    When I purchased the item, the previous owner stated the only blemish was a dead pixel at the bottom of the screen and he showed a picture of it in his add. After re-installing the applications DVD, this one dead pixel is no longer there. I don't know if this is a clue, but I am including all the info I can.
    I checked out System Memory in the Activity Monitor and it indicates
    Free:2.97GB ; VM Size: 31.57 GB
    Wired: 414.92 MB Page Ins: 167.48 MB
    Active: 322.36 MB Page Outs: 0 Bytes
    Inactive: 45.57 MB Swap Used: 0 Bytes
    Used: 782.80 MB
    When I click on Disk Activity in indicates:
    Reads In: 34065 Data Read: 1.4 GB
    Writes Out: 11885 Data Written 703.89 MB
    Read In/Read Out and Data Read/Data Written all say 0 Bytes
    When I double clicked on Activity Monitor it indicates:
    Real Memory Size: 18.43 MB (this fluctuates between 18.39 and 18.50 MB)
    Virtual Memory Size: 420.77 MB/421.00 MB
    Shared Memory Size: 0 Bytes
    Private Memory Size: 8.54 MB/8.71 MB
    Virtual Private Memory: 42.45MB/42.67MB
    Why do these numbers fluctuate every second or two?
    Why won't my Macbook Transfer DVD's into the hardrive so I can edit them with iMovie? Thank you for your help.
    Curtis Bradley, R.Ph.

    have you tried my workaround for importing from DVD?
    CLICK
    .. ok, works only in 95% .. some people complained not all files get converted with this method.. haven't found out why..

  • The normal value of battery capacity for macbook pro

    Hi there,
         I noticed my battery full charge capacity value is way below the technical specification from Apple.
    For macbook pro 15" early 2011 version a 77.5W battery is built-in.
    However, so far after 4 cycle, my full charge capacity is 6913mAh.
    It seems that I missed something. Though I didn't really notice the initial value when it's brandnew.
         Statistically what's the average value of the new battery will be ? around 75W or 7500mAh? Any idea?

    Best battery info resource is here:
    https://discussions.apple.com/thread/1764220?threadID=1764220

  • Operations are not getting despatched in capacity planning table

    Hi Experts,
    I am using capacity planning table (Graphical) to level the capacities and sequence the process orders. The start date of my orders are very well in future and sufficient capacities also is available in resources. But when I go to CM25 and select one order and click on despatch, system is not despatching it. This is the case for almost all the overall profiles.
    The surprising factor is, this function was working fine earlier without any issues. I havent done any changes in configs which will affect capacity planning.
    What can be the reason for this? Any thoughts please?.
    One more thing. Is there any option to avoid the capacity planning step if Iam using R/3 and manage it by some other way?
    Appreciate your earlier reply
    Thanks & Regards
    Prathib

    Most likely you didnt define the rowsource key properly. Please look under <install>/errors folder for any file there.
    Also, please read the documentation. There is information there about how to troubleshoot a loading problem. Please always read the documentation and we would appreciate feedback on the documentation.
    http://download.oracle.com/docs/cd/E17236_01/epm.1112/iop_user_guide/frameset.htm?launch.html

  • HT4623 why does my ipad kick me out of FB and sometimes to the 'settings' page or sometimes to the desk top, for what reason?     I have 50.8 GB of capacity available; it is version 5.1.1 and model MC497LL.   it is WIFI and internet via AT&T???  Can you h

    Can anyone help me?  Why does my ipad kick me out of FB?  Sometimes to the 'settings' page and sometimes to the desk top?  I would like to know why this happens and what I can check or change to make it stop.   I have 50.8 GB of capacity available; it is version IOS 5.1.1; model MC497LL.  It is WIFI and internet via AT&T?   Can anyone give me some clues on what to do; or change in settings???  Thank you very much! 

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Can I use an USB disc with my macbook pro bought in 2005.  What capacity will it take 2.00 or 3.00?

    can I use an USB disc with my macbook pro bought in 2005.  What capacity will it take 2.00 or 3.00?

    The first MacBook Pro's were not released until the beginning of 2006, and they had USB 2 ports.
    Anything available new in 2005 would have been a PowerBook G4 and they also had USB 2 ports.
    A USB 3 disk will just transfer data slower then it could do, if you plug it into a USB 2 port though, so you can buy either.

  • I have Movies on  my iMac that I want to share with Apple TV. How do I do that without also having them synch to my iPhone.  The movies exceed the capacity of the iPhone.

    I have Movies on  my iMac that I want to share with Apple TV. I have no problem getting the movies to show up and play on Apple TV. However, when I synch my iPhone to to my iMac all of the movies try to synch to the iPhone and this exceeds the available capacity (32) of the iPhone. So the question is, how do I make the movies available on Apple TV but not synch to my iPhone?

    I looked around some more on my iPhone and did find a video app. So all is well.
    Thanks so much for your help!!

  • Solution: Syncing with my iTunes library an endless headache: Songs don't transfer, or songs transfer and show up as "other," or I get double copies, or "Over Capacity," or stuck on "waiting for changes to be applied."

    iPod Touch 5g, 64GB, iOS 7.1. After my iPod data began showing up "Other," after an abrupt disconnection from iTunes during a sync I've spent the last week trying to fix it only to be thwarted at every attempt.  I've tried resetting and restoring 6 or 7 times now, and all goes well until it gets to copying my library of music over.  What I finally figured out is that 8,000+ songs is too many for iTunes to process all at once for some reason. 
    After several nights of leaving it connected all night I would find that the songs had physically copied and were occupying the ~45 gb of space on my iPod's storage, but were not showing up on my local library, instead listed as "Other" in iTunes and otherwise unusuable, or they would show up, but I'd have ~45 gigs of "Other," 45 gigs of "Audio," and would be "Over Capacity," by 30 gigs or so.  OR it would be "Waiting for Changes to be Applied," for 12+ hours.
    My work around:  In iTunes, under the "Music" / "Sync Music" tab, instead of syncing "Entire Music Library," select "Selected Playlists, Artists, Albums, and Genres."  You will have to indivually select the playlists, artists, albums, or genres and kept each bulk tansfer to <2000 songs at a time.  The easiest way for me to do this was by selecting one genre at a time and copying it over.  I had already taken the time to organize my library into 10 genres, you probably have more than 10.  This is irritating and time consuming, but it's better than resetting my iPod over and over and over again to no avail.
    Waiting for Changes? What iTunes is actually doing when it says it is "Waiting for Changes," or "Waiting for Items to Copy."  iTunes for whatever reason does not reveal the relevent data being processed during a sync (didn't it used to?), but there are a couple ways you can decipher what it is actually up to.  The first option is on the iPod; under Settings>General>iTunes Wi-Fi Sync it will tell you what it is up to during syncing.  The other way on the iPod; under Music>Songs, scroll all the way to the bottom to see where it is at in the process.  What iTunes, iTunes Wi-Fi Sync, and the bottom of the Songs library report are not always in agreement, but seeing all three will give you a better approximation of where you are in the syncing process and whether or not it is hanging.
    This for me was successful as a workaround, but this is not a solution.  Apple needs to fix this crap.  Maybe they just want to make it so difficult to have a physical library of music on the local storage of the iPod that we will just give up and sign up for their Match service.

    ALSO, on the iPod under Settings>General>iTunes Sync, you may need to back out of the "iTunes Wi-fi Sync," and reopen it to get it to update.
    (I use iTunes 11.1.5.5)

  • Mid 2010 MacBook Pro battery capacity at 89% with 64 cycles

    Hello everyone,
    I have a 13" mid 2010 MacBook Pro that I got around Christmas time. I downloaded coconutbattery a couple days ago and when i used it then My battery capacity had been 91%. So I thought that this was odd because of how new the computer is still (15 wks old with 64 battery cycles) so I read about how the battery needs to be recalibrated from time to time and after doing so (followed the directions perfectly) My capacity is now down to 89%. Should this be something to be concerned about or is this normal?

    It's quite normal and sometimes a recalibration can see things go up as well as down

Maybe you are looking for