Capital goods partial amount posting.

I hav one issue of client. requirement is, he has to pass 50% amt on capital goods to registers (RG23C) and 50% to hold account. Amount is going to respective accounts but only AED amount is not going properly. AED amt is going 100% of vendor invoice value to RG registers whereas it also have to go 50% as like other ( BED, or Ecess)
Plz give me some idea where we maintain such settings for partial amounts.
Regards
Inder Pal

Hi Inder
Check the following link
http://help.sap.com/saphelp_47x200/helpdata/en/48/71edea2cd411d4ae1900105a16d13d/frameset.htm
Thanks
G. Lakshmipathi

Similar Messages

Capital Goods partial Rejection

Dear Sir,
We have a scenario say , we place a PO for the purchase of Capital Nature for Item say Motor of 2 numbers . We did the GR for 2 numbers . Subsequently during the Inspection , 1 number Motor got rejected . We want to do UD for 1 number accepted quantity and 1 number Rejected Motor need to be send back to the Supplier .
Kindly guide us as what steps we need to follow to complete the cycle .
We assure to give full points for the suggested solution pl
Regards
B Mittal

we solve this by movement type 350 then 122.
while u r doing UD out one mat. to blocked stock. on that you can post 122 movement by using migo.
regds
S

AED Posting for Capital Goods

Hi
For Capital Goods, excise availed will be 50% for this financial year and 50% for next financial year. Is it applicable for AED/CVD for imported goods also.
Rgds
Srini

Businesses are allowed to set off excise duty on purchases of capital goods against excise duty on outputs. However, unlike with raw materials, you can only set off half of the duty in the first year, and the rest in any year after that.
Prerequisites
In the material master, you have classified the capital goods as such.
Because duty on capital goods is handled using excise transaction type CAPE, you must also have specified that you want this transaction to credit the excise duty to the CENVAT on hold account. You make this setting in Customizing for Logistics u2013 General, by choosing Taxes on Goods Movements ® India ® Account Determination ® Specify Excise Accounts Per Excise Transaction.
You must then have specified which G/L account is the CENVAT on hold account, again in Customizing for Logistics u2013 General, by choosing Taxes on Goods Movements ® India ® Account Determination ® Specify G/L Accounts per Excise Transaction.
Features
When you post an excise invoice that contains capital goods, the system posts half of the excise duty to your CENVAT account and posts the rest to a G/L account for CENVAT on hold.
In following years, you can use a report to identify the capital goods with excise duty on hold and transfer the duty to the CENVAT account (see Transfer of CENVAT Credit on Capital Goods).
Activities
When working with excise invoices that include capital goods, note the following:
Capturing vendor excise invoices
When you create an excise invoice with capital goods, you have to set the material type to A (assets), C (consumables), or T (tools).
Posting excise invoices
When you come to post the excise invoice, the system posts only half of the excise duty to the CENVAT account. The system does not round the amount off.
Transfer of CENVAT Credit on Capital Goods
You use this report to display a list of the vendor excise invoices where the vendor has levied excise duty but you have not posted it (in full) to your CENVAT account.
This is particularly useful in the case of capital goods, in order to find out how much credit remains from previous years.
Features
To access the report, from the SAP Easy Access screen, choose Indirect Taxes ® Procurement ® Excise Invoice ® Reports ® Balance Credit for Capital Goods.
Selection
On the selection screen, enter:
Organizational data
Data of the documents that you want
Output
The system displays a list of excise invoices with excise duty outstanding. It shows you:
The total amounts of the various types of excise duties levied on the excise invoice
How much duty has still to be posted to the CENVAT account
Select the excise invoices that you want and choose Transfer credit. If you want to transfer only a portion of the remaining amount, enter this amount as the amount to be credited.
The system creates an accounting document to post the duty to the CENVAT account and creates an entry in the Part II register.
Regards'
eswarmanu...

Capital goods purchase and return

Hi Sap guys,
Can anybody give me the steps of purchasing the capital goods and return of the same.Also give me the steps of debit and credit of cenvat
Best Regards.
Sandeep

List of Transaction Codes for Purchase of Capital Goods: -
1. ME21N u2013 Create Purchase Order (Acct assmt cat. - "A")
2. MIGO u2013 Goods Receipt against PO
3. J1IEX u2013 Post Excise Invoice
4. MIRO u2013 Enter Vendor Invoice
1. At the time of Goods Receipt of Capital Goods, Asset Account will get debited and GR/IR Clearing Account will get credited.
2. After posting the excise invoice that contains capital goods, the system posts half of the excise duty to u201CCENVAT Receivable accountu201D (Dr) and post the rest to a temporary offset A/c u201CCENVAT on holdu201D (Dr) and Credit CENVAT Clearing Account.
3. At the time of Invoice Verification, Vendor Account will get credited and Clearing Accounts (GR/IR and CENVAT) & VAT Accounts (if required) will get debited.
Vendor Return cycle of Capital Goods: -
1. MR8M - Cancel Vendor Invoice (If Payment is not done)
2. MIGO - Cancellation > Material Doc (GR Doc)
3. J1IEX - Post > Vendor Excise Invoice
4. J1IEX - Cancel > Vendor Excise Invoice
4. MIRO - Credit Memo to Vendor (If Payment is done)
1. At the time of Goods Return of Capital Goods, Asset Account will get credited and GR/IR Clearing Account will get debited.
2. After posting the excise invoice cancellation that contains capital goods, the system posts half of the excise duty to u201CCENVAT Receivable accountu201D (Cr) and post the rest to a temporary offset A/c u201CCENVAT on holdu201D (Cr) and debit CENVAT Clearing Account.
3. At the time of Invoice cancellation, Vendor Account will get debited and Clearing Accounts (GR/IR and CENVAT) & VAT Accounts (if required) will get credited.
In short Reverse all the entries
You can not show Return cycle as in case of RM since stock of Capital Goods are naot maintained.

Capital goods, during vendor return, Excise is getting post to RG23A instea

Hi SAP Guru,
I have very critical issue to be resolved immediately in the area of Excise for CAPITAL GOODS, please help! The things is....
1. At GR level using mvt 101, system is posting all BEDECSSECess to correct RG23C register, fine
Quality people have rejected goods, when Im trying to create vendor return delivery using......
1. GR (122) >J1IS>J1IV, using this process system is posting BED+ECS to RG23C but SECess to RG23A, I wanted to know why SECess is getting post in RG23A instead RG23C. plz suggest if any config. chages to be done.
Or
2. When I am trying GR (122) along with all Excise parameters using enjoy MIGO( Return Delivery), system is throwing error "RG23C-AT1 amount 1600.00 is greater than the available amount 0.00". When I checked the relevant register I found out enough balance.
Or
3. After GR (122), when Im using J1IH(JV) method, system is throwing error like " Balance in transaction currency 'Message no. F5702'.
Now plz suggest the correct answer!
Thanks & Regards
Manoj K Singh
+91 9777299580

Hi Gurus ,
I hope you must be doing greate, steps are as follow which i'm following for vendor return and subsequent delivery for capital goods.
1. PO -> MIGO (101) -> Excise capute & Posting using J1IEX -> MIRO.
For excise, part1 & 2 to relevent register posting has taken placed.
Now quality dept. has rejected the goods, for which vendor delivery should take place.
2. For Vendor return Delivery
MIGO 122 w.r.t GR of 101-> Excise capute & Posting using J1IS&V.
For excise, part1is getting created using J1IS, J1IV is creating part 2, in Acct. doc. RG23C BED/ECS/HEC is being Credit and "PLA On Hold" is being Debited for BED/ECS/HEC amount.
3. For Vendor subsequent delivery, I have done the excise config. for Movt. 123 .
MIGO 123 w.r.t. GR of 122.
While doing GR for 123, system is not generating Excise screen.
any way ,After GR of 123, I have Capture Excise Invoice after inputting all relevent data, but while Posting, System is generating message that Part 2 is does not exist for vendor excise invoice.
Now i thinks my requrement is visible for your understanding to suggest me some valuable idea to resolve this issue.
if possible can plz drop a test mail to hksiva.manoj at gmail dot com for further consultation.
Thanks & Regards
Manoj K Singh

Excise is getting post to RG23A instead RG23C for capital goods return del

Hi SAP Guru,
I have very critical issue to be resolved emmediatly in the area of Excise for CAPITAL GOODS, please help! the things is....
1. At GR level using mvt 101, system is posting all BEDECSSECess to correct RG23C register, fine
Quality people has rejected goods,When i'm trying to create vendor return delivery using......
GR(122)>J1IS>J1IV,, useing this process system is posting BED+ECS to RG23C but SECess to RG23A, i wanted to know why SECess is getting post in RG23A instead RG23C. plz suggest if any config. chages to be done.
or
2. when i am trying GR(122) along with all Excise parameter, system is throwing error "RG23C-AT1 amount 1600.00 is greater than the available amount 0.00". when is checked the relevent register i found out enough balance.
or
3. After GR (122), when i'm using J1IH(JV) method, system is thowing error like " Balance in transaction currency 'Message no. F5702'.
Now plz suggest the correct answer!
Thanks & Regards
Manoj K Singh
+91 9940216442

Hi Datta, thanks for the reply
according to SAP Note 1062872 (2005B version) it reads as
"The excise register for excisable items of type raw materials/finished goods is currently set to RG32A Part I. When you create an out going excise invoice with these type of items, the accumulator for RG32A Part I will be increased."
I thought the same is applicable with SAP Business One 2007B version. However what you said might be correct. But the problem with one of my manufacturing client is whenever they raising an Outgoing Excise invoice they have registered numbers automatically be created on the pre printed invoice paper. where the invoice will be printed only with the qty, rate , price and register numbers rest of the information on the document is pre-printed. So they have a column called RG23C Part I / II where register numbers are automatically printed. But RG23C Part I & II are for "Capital Goods"
If I consider these manufactured items as "capital goods" then it will raise register numbers automatically. but this will not acceptable. correct me if i am wrong. so all of these items should be cosidered as Finished Goods in the item master data. if i do that again there is a conflict with their RG23C Part I / II on the pre-printed column and i wont be raising any register numbers.
Please update me on how should I deal with this issue
SV Reddy

Posting of cenvat credit of 50% on capital goods through T.Code:J1IH

Hi
Please advise me the procedure for posting of cenvat credit of 50% on capital goods through T.Code:J1IH.
As a matter of fact, when i tried to post the last year credit of 50% cenvat credit on capital goods the system accepting 50% only.
For example, last year we got Rs.200000 as cenvat credit and out of that 50% credit of Rs.100000 got availed last year. In this year when i tried to avail of remaining of Rs.100000 through transaction code J1IH system is accepting 50% of Rs.100000 i.e only Rs.50000 is accepting.
I look forward for your reply
Thanks and Best Regards
Shekhar
Edited by: Shekhar Yecham on Sep 16, 2008 8:54 PM

Hello,
The settings before 01.04.2010 were same. However, after thorough checking of the GL A/cs, I have following observations -
1) Plant 1 - Balance as on 31.03.2010 in Cenvat on Hold A/c -Rs. 195080. It is upload balance & t.code used is FBVB
    There are some more transctions in this A/c which are reversed due to wrong entries.
    Balance in Excise Duty RG 23 C as on 31.03.2010 - NIL
2) Plant 2 - Balance in Cenvat on Hold A/c as on 31.03.2010 is Rs. 166701. Again this is an upload balance with FBVB
    Balance in Excise Duty RG 23 C as on 31.03.2010 - Rs. 56931.62
3) Plant 3 - No upload balance. All the transactions are routed through J1IEX except 1 from FB01
    Balance as on 31.03.2010 - Cenvat On Hold A/c - Rs. 86876.06
                                                 ED RG 23C - NIL
Hence, would like to know -
1) Any separate procedure to take the credit of upload entries?
2) If the Balance in ED RG 23C A/c is NIL, will it affect on taking credit?
Thanks & Regards,
Reshma

Import PO Secess dot get post (for capital goods)

1)     created import PO(capital goods material)
2)     capture excise
3)     Made GRN
4)     Post excise invoice
when post in J1IEX, and simulate, Secess dont come. remaining all comes
ex
CENVAT OH     S Debit     719.87
CENVAT on CG-ADC     S Debit     619.45
CENVAT on CG-BED     S Debit     698.75
CENVAT on CG-ECS     S Debit     13.98
Unappl cstm-CVD     H Credit     2,052.05

Hi
In following path check
SPRO-Logistic general-India-account determination-specify Excise account per excise transaction
here for CAPE RG23 AT1 account should be there for debit
Regards
Kailas Ugale

Net amount doubled when goods issue is posted

Hi guys,
A material was received against a PO. Issued to customer,customer found defect and returned . It was then returned to the vendor who corrected it and then forwarded back to us and received in. and is again issued to customer . Everything has gone fine but in the last transaction(mvt type 601), the amount posted is double the material amount. I have checked the price in the material master ,the moving average price got changed to double it's price. what might have caused this. price change? Is it related to a credit memo( i'm new to this). I've checked sales order. and the price is double for the item in there too.
I'd appreciate your help.
Thanks
Cheris T

Hi steve,
our process here is:
1) we received goods ( 101)
2) invoice verification is done
3) issued to customer.(601)
4) customer returned ( 651 and then 457)
5) we did 122 against first goods receipt.
6) we did subsequent delivery for receiving the material against the PO
7) then they looked at mr11 they've seen some GR/IR clearing against the same PO we used for the 101.they posted the GR/IR clearing .
{I think something is wrong in the return to vendor process here: 101>>122>>101)}
8)we created a new lin item in the same sales order we used for first delivery and issued the item.
((here occured the problem .the sales order item picked the price from material master which is now double it's price))
Can you help me findout what might have been the problem here
I have checked the PO (same for both goods receipts) and the price is correct here.
I'd really appreciate your help.
Thanks
Cheris T

Excice invoice captured as capital goods, but material is raw material

All SAP Gurus,
We have wrongly captured (and posted) the excise invoice as Capital goods (RG 23C), but material is Raw material (RG 23A).
Material document can not be reversed as material is already issued and consumed for production activities.
To get the effect in Rg 23 A, we have passed the Excise JV (J1IH - Other Adj.).
Due to this Excise JV, we are getting entry in RG 23A, but the same entry is also displayed in RG 23C.
Is there a way to delete/remove/reverse this entry from RG 23C.
Please suggest,
Regards,

Hi,
Use following functions to adjust the duties in RG23A and RG23C;
Go to J1IH - Excise JV
Use following method to reduce duties from RG23C Accounts
Making Adjustment Postings for Other Transactions
Use: - You follow this procedure if you want to make an adjustment posting that does not fall into any of the other categories of adjustment offered by this function. You can only use an external document as your reference document.
Procedure: -
1. J1IH > Excise JV > Other adj.
2. Enter data as required, including:
u2022 Document number
Enter the number of the external document that you want to refer to.
u2022 CENVAT account selection group box
Specify which account is affected by the adjustment posting is for. Here in your case select RG23C.
3. Click on u201CEnteru201D button.
The system displays the information from the material document.
4. Adjust the posting date as necessary and enter Vendor code as per requirement.
5. Enter the amount of excise duty in either of the following ways:
u2022 To enter line items for different materials and the excise duty accordingly, choose u201CDetailsu201D button and enter the line items in the table.
Here fill details like Material Code, Quantity as per Excise Invoice, Batch No, Reference (i.e. GRN Document), BED and Ed Cess Amount manually.
If you want system to propose the BED and Ed Cess Amount, Click on u201CGet Excise Invoiceu201D button and select the proper Excise Invoice from which the proportionate amount is to be copied.
Select the u201CExcise Invoiceu201D and click on u201CContinueu201D button.
It will copy BED and Ed Cess and SECess amount as per the quantity mentioned here. It will be proposed in proportion of selected Excise Invoice quantity and value.
u2022 To enter the excise duty only, choose u201CHeaderu201D button and enter the excise duty in the totals fields at the foot of the screen.
6. Specify which G/L accounts are to be posted to.
7. Save the adjustment posting.
System will post Excise JV Document; Accounting Document with Part2 Serial No has been successfully created.
Use following method to take duty credit in RG23A Accounts
Making Adjustment Postings for Additional Excise Paid by Vendors
Use: - You follow this procedure if a vendor has increased the amount of excise duty that it originally charged you and you want to debit the difference to your CENVAT account.
Procedure: -
1. J1IH > Excise JV > Additional excise.
2. Enter data as required.
In the Document number field, enter then number of the document sent to you by the vendor.
u2022 CENVAT account selection group box
Specify which account is affected by the adjustment posting is for. Here in your case select RG23A.
3. Click on u201CEnteru201D button.
4. Adjust the posting date as necessary and Enter Vendor Name.
5. Enter the amount of excise duty in either of the following ways:
u2022 To enter line items for different materials and the excise duty accordingly, choose u201CDetailsu201D button and enter the line items in the table.
Here Enter Material code, quantity as per excise invoice, reference document (i.e. GRN Document), batch no., BED and Ed Cess Amount to be posted.
u2022 To enter the excise duty only, choose u201CHeaderu201D button and enter the excise duty in the totals fields at the foot of the screen.
6. If the duty qualifies as countervailing duty (CVD):
a. Select CVD applicable.
b. Enter the CVD amount in the BED amount field.
7. Specify which G/L accounts are to be posted to.
8. Save the adjustment posting.
System will post Excise JV Document; Accounting Document with Part2 Serial No has been successfully created.
Then do J2I5 - Extract and J2I6 - Print Excise Registers

Procurement of Capital Goods-Accounting entries error

Hi All
I processing procurement of Capital Goods scenario.
Qty - 1; Base Amount: 100; BED: 16%; AED: 8%; SED: 4%
When I posted Goods Receipt, I beleive the accounting entries are expected to be as follows:
Dr BED 16
Dr AED   8
Dr SED   4
Cr CENVAT Clg 14-
Cr CENVAT On Hold 14-
But the Part II entries are like as following after posting the GR:
Dr BED 8+
Dr AED   4+
Dr SED   2+
Cr CENVAT Clg 24-
Dr CENVAT On Hold 10 +
Could you please help in this regard
Best Regards
Rahul

for capital goods u can't claim the whole excise that u have paid, it will be only 50% u can claim for the first year..

CAPITAL GOODS credit.

Dear all,
A capital goods is sent to subcontractor for some Job work , it does not come within 180 days , resulting the duty is debited as per rule in transaction code J1IH . subsiquently the goods are received back. Now while making the JV to re credit the debited amount in J1IH the system by default credits 50% amount(since it is a capital goods) instead of 100% as this is not the purchase for the first time. (here the challans are maintained manually )What should be done to post the entry by 100% in this scenerio ?
Regards,
Ashish

Hi,
I did not understand the question fully, but still would try to answer it.
You say that the remaining credit of 50% was not taken in the opening balance. Does that mean that you want to take it over now?
If yes, then the procedure is like this:
Lets say that there is a credit of Rs.50 to be taken over to SAP. To pass this entry, you have to use the transaction J1IH - Additional excise tab (RG23C)
here fill the details and pass the entry for exactly the double of the credit to be taken. In this example, pass an entry for 100.
This ensures that Rs.50 goes to the Cenvat of hold account and the remaining Rs.50 goes to the normal excise accounts. This amount of the second Rs.50 is not required and so we have to reverse it using J1IH - Other Adj (RG23A).
With that you would have the opening balance of the Cenvat of hold in SAP and then you can utilize it.
If you say that you do not want to upload the opening balance and still want to take credit of the remaining 50%, then I feel that there is something fundamentally wrong in the upload of the opening balances as the opeining balance sheet would not tally.
Hope that answers your question
Thanks and Regards
Venkatesh A K

Excise reversal on Capital goods

I am facing a problem in Excise. The client has taken a wrong credit of asset in a dealers transaction.
MIGo Done
J1iex - Credit taken.
The client wants to reverse the transaction since the credit is taken more. 50% credit has gone to credit on hold.
We tried by reversing the 50% credit using J2I8 & then reverse the 100% credit taken in J1IH (Other Adjustment) & then take the credit in J1IH (Addational Excise) But at time of doing MIRO the Excise amt is the original amount of J1iex & system is not taking the new amt as taken in J1IH (Addational Excise).
Pls suggest how to reverse the original entry of excise & pass the entry for the correct amt of excise & also the same amount should appear at time of doing MIRO (For Capital Goods.)
Kindly revert...

Dear,
The reversal entry done by J2I8 and the adjustment entry done by J1IH would not impact the J1IEX document posted. Hence the MIRO would still be representing the values of the J1IEX posted values. The excise value can be adjusted in the inventory value in the MIRO line item or can be adjusted in the unplanned delivery cost under details tab in MIRO (depending on the sales tax/VAT implications).
Hope it works.

Cenvat credit of Capital goods

Hi,
From the last year 2011, I heard that the cenvat credit for capital goods can be taken 100 % in the first year itself.
How to the make the changes accordingly so that the 100 % tax amount goes to cenvat account instead of posting 50% to cenvat account & 50 % to cenvat on-hold account and then doing J2I8 to transfer of credits from cenvat on-hold account to cenvat account.
Regards
Madhusudan

Any solutions??
regards
Edited by: madhusnb4 on Jan 23, 2012 1:27 PM

ED Configuration for Capital goods

Hi Gurus,
I have a problem in calculation of Excise duty with respect to capital goods.
Our client wants to Create a new tax code ......though which they can claim the .....Input of 50% Excise duty this year and 50% next year,( for that he want to update two different GL accounts for these percentages) and 4% VAT on it.
EX:
The new tax code for 12.36% of excise duty + 4% VAT, required in a single tax code. (This 12.36% ED -- 50% this year and 50% next yr)
Required for the following scenario
Suppose Base AMC valve is          Rs.10000/-
12.36% of Excise duty which is     Rs.1236/-
4% of vat on Rs.11236/- which is    Rs.898.88/-
Total amount including taxes Rs.10000 + 1236 + 898.88 = 12134.88
As the client is not using CIN, how to configure this scenario. We are on ECC 6.0
Thanks in adv,
Sri SAP

Hi,
1. for Capital Goods, first in J1ID miantain in material and chapter id maintain that material code with Assets.
2. In Create PO with Account assigment as Assets.
3. In SPRO, while maintaing specify Excise accounts per Excise TT as
CAPE          CR Credit     ONHOLD CENVAT on hold account
CAPE          DR Debit     ONHOLD CENVAT on hold account
CAPE          DR Debit     RG23AT1 RG 23 AT1 Account
CAPE          DR Debit     RG23BED RG 23 BED account
CAPE          DR Debit     RG23ECS RG 23 ECS Account
4. Now in PART2, RG23C Register type is updated for Capital Goods
5. The Excise Posting Entries must be like
During Excise Invoice Credit
                                    Cenvat Account           Dr.       (50%)
                                    Cenvat On-hold           Dr.       (50%)
                                    Cenvat Clearing                      Cr.
6. Check the Balance Credit Capital Asset T Code J2I8
Hope help u !
Regards,
Pardeep Malik

Capital goods partial amount posting.

Similar Messages

Maybe you are looking for