Capital Management Services

I lost my job back in 2011 and was not able to pay some of my cards and 3 went into collections: 1. Capital one (limit 1200) with Portfolio Recovery Services2. Orchard (HSBC $300) with Portfolio Recovery Services3. Citi ($6800 with Capital Management Services) I could not get pay for delete with any of them, so I went ahead and paid almost the full amount with PRS and settled for around $3000 with Capital Management Services and paid it in 3 installments. The last one was June 1st and the credit reports have been updated yesterday. The card still doesn't report 0 balance, but reports balance minus 3 payments. I received the letter from CMS stating that I paid the settlement. I really need to have zero balance showing because I want to start rebuilding my credit. Right now, my FICO scores are around 550 and I am hoping to raise them to around 650 at least within the next 1 year. What should I do? Order all the reports and dispute? Contact CMS?

floweryu wrote:
I lost my job back in 2011 and was not able to pay some of my cards and 3 went into collections: 1. Capital one (limit 1200) with Portfolio Recovery Services2. Orchard (HSBC $300) with Portfolio Recovery Services3. Citi ($6800 with Capital Management Services) I could not get pay for delete with any of them, so I went ahead and paid almost the full amount with PRS and settled for around $3000 with Capital Management Services and paid it in 3 installments. The last one was June 1st and the credit reports have been updated yesterday. The card still doesn't report 0 balance, but reports balance minus 3 payments. I received the letter from CMS stating that I paid the settlement. I really need to have zero balance showing because I want to start rebuilding my credit. Right now, my FICO scores are around 550 and I am hoping to raise them to around 650 at least within the next 1 year. What should I do? Order all the reports and dispute? Contact CMS?They typically update first to the remaining balance and then update to 0 balance, they have to report 0 balance even if they settle for less. Allow 60 days for it to complete

Similar Messages

  • Production Manager - Service

    Production Manager (Service)-FLU000433
    OPCO Description
     Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. We are a dynamic market leader with sound financial health. Fluke has achieved the number one or number two position in every market in which it competes. The Fluke brand has a reputation for portability, ruggedness, safety, ease of use and rigid standards of quality. A wholly owned subsidiary of Danaher Corporation (www.danaher.com), Fluke is a multi-national corporation headquartered in the greater Seattle area. We offer an entrepreneurial environment that is team-centered, customer-driven, quality-focused, and growth-oriented. It is driven by the phenomenally successful Danaher Business System. Working at Fluke gives you access to a robust career development process and challenging, “stretch” opportunities.
    Description
    Supervise/Manage the day-to-day operations with responsibility for producing product at minimum cost consistent with quality specifications and production schedules.  
    Responsibilities:
    Responsible for all process within assigned area, including contributing to the development and implementation of new processes and to the continual improvement of existing processes.
    Interpret and execute policies affecting organizational units, recommend modification to operational policies and ensure compliance with Company policies.                                                                                                   
    Responsible for performance appraisals of assigned employees and recommend appropriate status changes and/or salary increases.
    Assure that proper records and reports are established and maintained for operations and results achieved.
    Depending upon level, may determine the need for labor, space, materials and capital equipment and provide cost analysis in justifying expense.
    Scope of supervisory responsibility is dependent upon management level.
    Depending upon level, may have increased budgetary responsibility.
    Manage daily workflow in multiple service cells
    Resolve day to day production issues
    Work with internal organizations to resolve parts delivery and product reliability and quality concerns
    Manage daily performance to meet quality, delivery, cost and revenue metrics
    Responsible for P&L performance in assign area
    Qualifications
    Prefer previous experience in a service environment
    Knowledge of and/or experience utilizing lean principles desired.
    Minimum of 3-5 year previous supervisory experience.
    Note: May require occasional travel, extended hours, and on-call duty.
    All external hiring is contingent upon the successful completion of a pre-employment drug screen and a criminal background check.
    Fluke is an equal opportunity employer.
    www.fluke.com
    www.danaher.com

    Thread of the Necro-Dancer:
    Regardless, the step Katie was apparently implying (but seems to be missing from her description) is the bit where you backup the database and restore it to a separate instance. after this is done, you can then install a new management server targeting this
    new instance, and then promote the new management server to the workflow server, and run the isolated database using the new management server. 
    i would recommend, however, that you use
    the supported method of producing a upgrade lab with production data, which is very similar to the method Katie implied, includes directions covering all of these steps involved, and allows you to periodically restore production data to the lab database
    with minimal overhead. 
    I didn't notice the date before now. I just look at the latest unanswered posts, so not sure how I got into this one. But technet has been acting weird lately. I get an internal server error far too often.
    http://codebeaver.blogspot.dk/

  • How to configure request manager service for multiple website in one web application

    I have set up sp 2013 as below:
     web application : wa1
    site collection : sc1
    sp site: site1, site2
    I used 2 WFE, 1 APP, how can I use request manager service to control  site1 to wfe1, site2 to wfe2?
    Awen

    That's not what i'd describe as load balancing.
    A better description would be load-isolation. In your description then if the load on site1 was large (and growing) but site2 was quiet then site1 would struggle and eventually become unable to handle the number of users but site2 would still be ok. That's
    fine from a QOS point of view but it's not the norm for load balancing. It would work in simple scenarios but the out of the box load balancing tools are much better suited than that sort of approach.
    This article shows how to configure the RMS and may help show how your request is difficult to configure:
    http://www.harbar.net/articles/sp2013rm2.aspx

  • Looking for help - Company is going to Mobile Asset Management service that does not support BB - especially BB 10.

    Hello,
    I am looking for ideas/help. I currently have a BB Z10 (10.1.0.2039) with Verizon Wireless.  The company has a BB Enterprise Server for older devices (I previously was on that).  I bought a Z10 several months ago and have been connecting to the corporate network through Lotus Traveler. They do not have and will not implement a BB 10 Enterprise Server. Some in IT informed that if the company used the BB software they could manage all devices..... not accepted.
    All my contacts, calendar, and company email is funneled to the BB Hub.....
    So my company is implementing a Mobile Asset Management Service that I have to sign up for (Airwatch?).  They only support Android and IPhone.
    Will future versions of the BB OS support Android Apps.... Soon (I have less than 2 weeks)
    I have read where it is possible to put the device in development mode to run Android Apps.  I don't know if that will work with this and have no idea how stable the phone is in that mode. I travel internationally so I don't know how a development mode would work overseas. Any thoughts?
    I like my Z10 but will need to switch to keep functionality if I can't find a work around 
    Any assistance ????
    Thanks for any help.

    Hi and Welcome to the Community!
    BB10 devices have the ability to run .apk apps via special methods. Development Mode is used only for installing the app...not for normal operation. So you install (side-load) the app in Development Mode, then go back to normal mode for normal operations.
    If a .bar file for the .apk app already exists somewhere, you can side load it to the BB10 device and see if it works or not. If there is not yet any .bar file, there is an app called SideSwype that can convert many .apk apps to .bar and install it to your device.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How do you resolve Financial Management service validation error in EPM ?

    Does anyone know how to resolve Financial Management service validation error from EPM Diagnostic Report?
    Environment:
    Quad-Core AMD Processor 2.2 GHz (Server Machine)
    5 GB RAM
    Server 2003 Standard 32-Bit SP2 (also tried in Enterprise)
    Application Server:
    WebLogic Server 9.2 Custom Installation (with Add-Ins)
    http://www.oracle.com/technology/software/products/ias/htdocs/wls_main.html
    Database:
    Oracle 10gR2 (Standard Installation per step-by-step guide from Oracle)
    http://www.oracle.com/technology/software/products/database/index.html
    Hyperion EMP System 11.1.1.3:
    Installer
    Foundation Services (4 Files )
    EMP Architect
    Financial Management, Planning, Financial Reporting and Web Analysis (primarily interested in FM)
    http://www.oracle.com/technology/software/products/bi/performance-management/index.html
    The following are the sequences of steps carried out during the Installation and Configuration of EPM:
    1)     Installed the Server along with its respective SP2 – Shutdown the machine
    2)     Assigned IP and DNS addresses
    3)     Installed Window components by ticking Application Server Console, Enable COM+ access, IIS and DNS
    4)     Run “dcpromo” to create a Domain Controller with default values and assigned a domain name – Shutdown the machine
    5)     Installed Weblogic Server 9.2 and configure it using Configuration Wizard – Selected “test environment” and ticked default “listening port” – Shutdown the machine
    6)     Basic installation of Oracle Database 10gR2 using Step-by-Step guide provided by Oracle and carried out Password Management steps. After installation, I then created a user “oracle” and assigned it to ora_dba User Group with the required Local Security Policies – “log on as a batch job” and “Act as part of operating system”
    7)     Logged into database and acknowledge the licensing window – Shutdown the machine
    8)     Restarted the machine and checked all relevant and newly installed Database and WebLogic services are running.
    9)     Started Installing EPM components by double clicking “InstallTool.cmd” and selected all relevant components at ONCE as per Installation Guide – Result: - All selected EPM components were successfully installed without errors or exceptions
    10)     At the end of installation window, I carried out the configuration in the following scearios:
    Scenario 1: Configuration all at Default settings
    Scenario 2: Configuration all, except “Application Server” I selected the WebLogic9.2
    Scenario 3: Configuration all, except “Application Server” and “Workspace Web Server” were being Welogic9.2 and IIS HTTP
    RESULT: After all numerous installations, all came down to ONE ERROR from “Diagnostic Report” stating the following:
    Financial Management:
    FAILED SVR: HFM Service Validation Check if HFM service in working state.
    Error: Error message: <03/11/2010 05:32:26 PM> CreateApplicationCAS... Failed at line: 2
    Recommended Action: Make sure HAT utility is working. 1 s
    I then simply ignored this error and tried to deploy an Application, all worked fine until you get to the point at “Job Console” where you need to press “Refresh” button. Progress remained at 12% until it got timedout after 300 seconds and force attempt of refreshing resulting in “aborted” job with the following error:
    Error Reference Number: {DB3940F5-2D4A-46AB-A370-77F82F121BBA}
    Num: 0x8000ffff;Type: 0;DTime: 4/12/2010 4:39:58 PM;Svr: PBAR;File: CHsvDataSourceImpl.cpp;Line: 196;Ver: 11.1.1.3.0.2413;
    Num: 0x8000ffff;Type: 0;DTime: 4/12/2010 4:40:07 PM;Svr: PBAR;File: CHsxServer.cpp;Line: 1276;Ver: 11.1.1.3.0.2413;
    Num: 0x8000ffff;Type: 0;DTime: 4/12/2010 4:40:07 PM;Svr: PBAR;File: CHsxServer.cpp;Line: 1190;Ver: 11.1.1.3.0.2413;
    Num: 0x8000ffff;Type: 0;DTime: 4/12/2010 4:40:07 PM;Svr: PBAR;File: AgentHelper.cpp;Line: 728;Ver: 11.1.1.3.0.2413;
    Num: 0x8000ffff;Type: 1;DTime: 4/12/2010 4:40:08 PM;Svr: PBAR;File: CHfmAwbAgent.cpp;Line: 744;Ver: 11.1.1.3.0.2413;
    This is, I believe preventing me from deploying Consolidation Apps, including Sample Application provided with EPM Downloads. I have tried installing and configuring by components. All failed with the same outcome.
    I have been working on this effortlessly in different combinations to get at least one Financial Management Application get deployed so I could enhance my learning adventure. As it stands, I am not sure where to get help and completely lost in the World of Oracle. I am also come to wonder whether “Free Downloads of EPM” are indeed, is “complete and is in working-state” or do I need a licence to use for personal learning experience? Are there different downloads for different needs or/users For example, eDelivery downloads are different from OTN Agreement downloads?
    I have downloaded the files from following URL:
    http://www.oracle.com/technology/software/products/bi/performance-management/index.html
    I am completely lost and all services are up and running and not sure what I am missing!! Any assistance will be greatly appreciated.
    Many Thanks
    BT
    Edited by: user8973921 on 13-Apr-2010 05:08
    Edited by: user8973921 on 13-Apr-2010 10:56
    Edited by: user8973921 on 14-Apr-2010 02:30

    I am having exactly the same problem using Windows 2003 Standard editions SP2. Is there anyone who knows a possible solution for this? The effect on HFM is that is not possible to create an application, since I always get an error that says "Server execution failed"
    Error Reference Number: {E68F87E6-588E-4665-862C-AAB02CB299DA}
    Num: 0x80080005;Type: 0;DTime: 12/3/2009 5:21:47 PM;Svr: KINGTUT;File: CHsxServerImpl.cpp;Line: 3522;Ver: 11.1.1.3.0.2413;
    Num: 0x80080005;Type: 0;DTime: 12/3/2009 5:21:47 PM;Svr: KINGTUT;File: CHsxServer.cpp;Line: 1115;Ver: 11.1.1.3.0.2413;
    Num: 0x80080005;Type: 0;DTime: 12/3/2009 5:21:47 PM;Svr: KINGTUT;File: CHsxServer.cpp;Line: 857;Ver: 11.1.1.3.0.2413;
    Num: 0x80080005;Type: 0;DTime: 12/3/2009 5:21:47 PM;Svr: KINGTUT;File: CHsxClient.cpp;Line: 2106;Ver: 11.1.1.3.0.2413;

  • Where do I find the "Node Manager" service?

    Can anyone tell me where to find the "Node Manager Service" In Call Manager 5.1.2 or IPCC 4.5?
    My db_CRA database in IPCC is not updating the real time ICD statistics table and Bug CSCsc09160 seems to indicate that stopping and starting the "Node Managers" may fix the issue.
    From the bug report:
    Symptom:
    Under the db_cra two tables (RtCSQsSummary and RtICDStatistics) are not updating. They stop updating concurrently with engine failovers and reboots. Only a hard reboot or a
    service failover brings them back into an active state.
    When the RtCSQsSummary and RtICDStatistics tables do update on the
    primary DB they do not update on the secondary DB and the data on them
    doesnt get refreshed.
    Conditions:
    stopping Node manager on node 1, data fails to be written to node 2. Then when we start NM back up on node 1 data is still not written to either data store
    Workaround:
    Not much as a workaround, because the solution requirs stop on both Node
    Managers and bring up node 1 first and the data starts writing to DB
    again.
    Thanks,
    Brian

    Post Author: jsanzone
    CA Forum: Authentication
    Sven,
    The reference to Session Manager is more of a concept of operations versus an entity.  The portion of code that you copied and pasted in your post is actually part of the verbiage used in an ASP script that BusinessObjects expects you to create in order for you to obtain your objective.  You can use this coding to create your own customized script or you might be able to search around on the web for a more complete solution.

  • How to configure solution manager service desk knowledge base for customer?

    Hi Expert,
    How to configure u201CSolution Manager Service Desk Knowledge Baseu201D to allow Customer to check on the solution?
    Can we make the Solution Database open for the key user? Can we add one link in the workcenter and the customer can search existing solutions before they create message to us?
    Please advice,
    Thanks
    regards,
    ng chong chuan

    >
    Chong Chuan Ng wrote:
    > How to configure u201CSolution Manager Service Desk Knowledge Baseu201D to allow Customer to check on the solution?
    >
    > Can we make the Solution Database open for the key user? Can we add one link in the workcenter and the customer can search existing solutions before they create message to us?
    Hi,
    It's a good idea, but currently it's not yet supported.
    In Work Center, there is no predefined (nor a hidden) link shipped by SAP to access the Solution Database for key users.
    With a future EhP for Solution Manager, you might get an integration of the Solution Database into the message processing Web UI.
    Best regards,
    Ruediger

  • Office 2013 Rights Management Services??

    I am trying to make a powerpoint file I have created in Office 2013 (on Windows 7 64 bit) a read-only file so that presenters cannot change content, but can still view and present the file normally. 
    This was very easy to do with previous versions of Office, but in 2013 I am asked to sign in to "Rights Management Services" using my live ID. I have no problem with that, but it has not worked for me yet - I get the following error:
    Any advice or help would be much appreciated!
    A couple notes: I can still encrypt with a password, but this would not allow presenters to open, view and present the file without the password. 

    Hi Dan,
    It seems that PowerPoint doesn't have Restrict Editing option available as described here: https://support.office.com/en-us/article/Protect-your-document-workbook-or-presentation-with-passwords-permission-and-other-restrictions-05084cc3-300d-4c1a-8416-38d3e37d6826?ui=en-US&rs=en-US&ad=US 
    So the only option I see to complete your scenario is to use RMS - Rights Management Servers. However RMS can be installed as on-premises service, so you have to deploy and configure AD RMS server (it is not easy as it requires certificates, SQL, designing,
    etc).
    You can other options as weel - for example use Office 365 E3 or E4 licences. Those include Azure RMS subscription. If you have such license assigned to your user account, once you get prompt for credentials - type your O365 user credentials.
    Another option is to use RMS for individuals. Go to the page http://aka.ms/rms and register your private account to use RMS and then you would be able to sign in to RMS Service with your private e-mail account. Be advised that not all private e-mail domains
    are supported. For example you will not be able to register your @gmail.com or @hotmail.com account...
    Did my post help you or make you laugh? Don't forget to click the Helpful vote :) If I answered your question please mark my post as an Answer.

  • In Apex 4.0.1 Security Option Missing Under Manage Services

    In Apex 4.0.1, I am trying to edit session timeouts and password policies. The online docs say to login as as an Administrator and navigate to:
    home->administration->manage services-> security
    I am unable to see the "security" option anywhere.
    Does anyone know how to get to this option?
    Thank you.
    Elie
    Edited by: EEG on Oct 2, 2010 10:00 PM

    Sorry. I just realized that I was logged-in as a "developer" not as the APEX Admin which, of course, is why I couldn't find the "security" option. I had too many windows open at once.
    Elie

  • Remote Desktop Management service not starting. service-specific error: %%2284126209 - Event ID: 7024

    Hi Forum members,
    We have a client that has intermittent issues with RDS on a 2012 R2 server.
    As an overview of the environment, the client has a single VMWare host support 2 x Windows 2012 R2 VMs one is the File/Print/Email server and the 2nd is the RDS server used to allow the client to run MYOB Enterprise. Both servers have the AD DS role and
    DNS roles amongst others.
    The 1st issue is that the RD Connection Broker shows the error: "The server pool does not match the RD Connection Brokers that are in it. and then "1. Cannot connect to any of the specified RD Connection Broker servers".
    The above issue seems to be caused by the RDMS service not starting. When you attempt to start it, the service stops and the error in the title is logged in the "System" event log. Full transcript below:
    Log Name:      System
    Source:        Service Control Manager
    Date:          21/01/2015 4:50:32 PM
    Event ID:      7024
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      intentionally removed.local
    Description:
    The Remote Desktop Management service terminated with the following service-specific error: %%2284126209
    Event Xml:
    <Event xmlns="
      <System>
        <Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
        <EventID Qualifiers="49152">7024</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8080000000000000</Keywords>
        <TimeCreated SystemTime="2015-01-21T05:50:32.129949400Z" />
        <EventRecordID>53721</EventRecordID>
        <Correlation />
        <Execution ProcessID="568" ThreadID="12436" />
        <Channel>System</Channel>
        <Computer> intentionally removed.local</Computer>
        <Security />
      </System>
      <EventData>
        <Data Name="param1">Remote Desktop Management</Data>
        <Data Name="param2">%%2284126209</Data>
        <Binary>520044004D0053000000</Binary>
      </EventData>
    </Event>
    In addition in the "Application" event log, the following error is logged:
    Log Name:      Application
    Source:        MSSQL$MICROSOFT##WID
    Date:          21/01/2015 5:24:47 PM
    Event ID:      18456
    Task Category: Logon
    Level:         Information
    Keywords:      Classic,Audit Failure
    User:          NETWORK SERVICE
    Computer:      intentionally removed.local
    Description:
    Login failed for user 'NT AUTHORITY\NETWORK SERVICE'. Reason: Could not find a login matching the name provided. [CLIENT: <named pipe>]
    Event Xml:
    <Event xmlns="
      <System>
        <Provider Name="MSSQL$MICROSOFT##WID" />
        <EventID Qualifiers="49152">18456</EventID>
        <Level>0</Level>
        <Task>4</Task>
        <Keywords>0x90000000000000</Keywords>
        <TimeCreated SystemTime="2015-01-21T06:24:47.000000000Z" />
        <EventRecordID>4228336</EventRecordID>
        <Channel>Application</Channel>
        <Computer>intentionally removed.local</Computer>
        <Security UserID="S-1-5-20" />
      </System>
      <EventData>
        <Data>NT AUTHORITY\NETWORK SERVICE</Data>
        <Data> Reason: Could not find a login matching the name provided.</Data>
        <Data> [CLIENT: &lt;named pipe&gt;]</Data>
        <Binary>184800000E0000001F00000055004E0047004500520045005200410055005300530056005200300033005C004D004900430052004F0053004F0046005400230023005700490044000000070000006D00610073007400650072000000</Binary>
      </EventData>
    </Event>
    I have been attempting to resolve these errors for some time, without success. I have read the many KBs and forum entries related to the above and applied a number of the suggested fixes, including the one which suggests to add the NT SERVICE\ALL SERVICES
    to the "Logon as a Service" in the "User Rights Assignment" of the "Default Domain Policy" which is linked to the domain level, that both servers are objects of.
    My question to the forum is, can anyone come up with a solution to resolve the above issues and all the RDMS service to start which will then hopefully resolve the broker error?
    Regards,
    David West.

    Hi David,
    If virtual machines on the server are Windows Server 2012, then it is not supported to install Remote Desktop Connection Broker on a Domain Controller.
    More information for you:
    Remote Desktop Services role cannot co-exist with AD DS role on Windows Server 2012
    http://support.microsoft.com/kb/2799605/de
    Guidelines for installing the Remote Desktop Session Host role service on a computer running Windows Server 2012 without the Remote Desktop Connection Broker role service
    http://support.microsoft.com/kb/2833839
    If the VMs are Windows Server 2012 R2, I suggest you install RDS on a separate machine to see if the issue persists.
    Best Regards,
    Amy
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Configuration Manager services stoping on regular basis.

    we have installed and configured WebCenter Interaction 10.3 on Windows 2003 (x86) and using JVM 1.5.0_09.
    Running all the component as windows services. Today our Configuration Manager services is stopping on regular basis.
    Error:
    ================================================================================================
    STATUS | wrapper | 2009/08/06 06:14:48 | --> Wrapper Started as Service
    WARN | wrapper | 2009/08/06 06:14:48 | The value of property 'wrapper.java.additional.2', '%JVM_2%' is not a valid argument to the jvm. Skipping.
    WARN | wrapper | 2009/08/06 06:14:48 | The value of property 'wrapper.java.additional.3', '%JVM_3%' is not a valid argument to the jvm. Skipping.
    WARN | wrapper | 2009/08/06 06:14:48 | The value of property 'wrapper.java.additional.4', '%JVM_4%' is not a valid argument to the jvm. Skipping.
    WARN | wrapper | 2009/08/06 06:14:48 | The value of property 'wrapper.java.additional.5', '%JVM_5%' is not a valid argument to the jvm. Skipping.
    WARN | wrapper | 2009/08/06 06:14:48 | The value of property 'wrapper.java.additional.6', '%JVM_6%' is not a valid argument to the jvm. Skipping.
    WARN | wrapper | 2009/08/06 06:14:48 | The value of property 'wrapper.java.additional.7', '%JVM_7%' is not a valid argument to the jvm. Skipping.
    WARN | wrapper | 2009/08/06 06:14:48 | The value of property 'wrapper.java.additional.8', '%JVM_8%' is not a valid argument to the jvm. Skipping.
    WARN | wrapper | 2009/08/06 06:14:48 | The value of property 'wrapper.java.additional.9', '%JVM_9%' is not a valid argument to the jvm. Skipping.
    WARN | wrapper | 2009/08/06 06:14:48 | The value of property 'wrapper.java.additional.10', '%BIT_MODE%' is not a valid argument to the jvm. Skipping.
    STATUS | wrapper | 2009/08/06 06:14:48 | Launching a JVM...
    INFO | jvm 1 | 2009/08/06 06:14:50 | Wrapper (Version 3.2.3) http://wrapper.tanukisoftware.org
    INFO | jvm 1 | 2009/08/06 06:14:50 | Copyright 1999-2006 Tanuki Software, Inc. All Rights Reserved.
    INFO | jvm 1 | 2009/08/06 06:14:50 |
    INFO | jvm 1 | 2009/08/06 06:14:50 |
    INFO | jvm 1 | 2009/08/06 06:14:50 | WARNING - Unable to load the Wrapper's native library 'wrapper.dll'.
    INFO | jvm 1 | 2009/08/06 06:14:50 | The file is located on the path at the following location but
    INFO | jvm 1 | 2009/08/06 06:14:50 | could not be loaded:
    INFO | jvm 1 | 2009/08/06 06:14:50 | C:\bea\alui\configmgr\2.0\bin\..\..\..\common\wrapper\3.2.3\lib\native\win32\wrapper.dll
    INFO | jvm 1 | 2009/08/06 06:14:50 | Please verify that the file is readable by the current user
    INFO | jvm 1 | 2009/08/06 06:14:50 | and that the file has not been corrupted in any way.
    INFO | jvm 1 | 2009/08/06 06:14:50 | One common cause of this problem is running a 32-bit version
    INFO | jvm 1 | 2009/08/06 06:14:50 | of the Wrapper with a 64-bit version of Java, or vica versa.
    INFO | jvm 1 | 2009/08/06 06:14:50 | This is a 64-bit JVM.
    INFO | jvm 1 | 2009/08/06 06:14:50 | Reported cause:
    INFO | jvm 1 | 2009/08/06 06:14:50 | no wrapper in java.library.path
    INFO | jvm 1 | 2009/08/06 06:14:50 | System signals will not be handled correctly.
    INFO | jvm 1 | 2009/08/06 06:14:50 |
    INFO | jvm 1 | 2009/08/06 06:14:50 | OpenLog: verbosity level = 2
    INFO | jvm 1 | 2009/08/06 06:14:50 | bid.bootstrap.loglevel=info+
    INFO | jvm 1 | 2009/08/06 06:14:50 | 8-6-2009     6:14:50.872     Info     OpenKernel.Config     Disabled-1249553690622     WrapperStartStopAppMain     com.plumtree.openkernel.impl.config.providers.ConfigXMLFileProvider     Loading config data from C:\bea\alui\configmgr\2.0\bin\../settings/config
    INFO | jvm 1 | 2009/08/06 06:14:51 | 8-6-2009     6:14:51.419     Info     OpenKernel.Config     Disabled-1249553690622     WrapperStartStopAppMain     com.plumtree.openkernel.impl.config.providers.ConfigXMLFileProvider     Setting subscription data.
    INFO | jvm 1 | 2009/08/06 06:14:51 | container config context:EAS:configurator
    INFO | jvm 1 | 2009/08/06 06:14:51 | OpenLog: Registered application name: ConfigInitialization (local machine only)
    INFO | jvm 1 | 2009/08/06 06:14:51 | OpenLog: Configuration component contained no logging settings. Creating disabled log service.
    INFO | jvm 1 | 2009/08/06 06:14:53 | Aug 6, 2009 6:14:53 AM org.apache.coyote.http11.Http11Protocol init
    INFO | jvm 1 | 2009/08/06 06:14:53 | INFO: Initializing Coyote HTTP/1.1 on http-12345
    INFO | jvm 1 | 2009/08/06 06:14:53 | Aug 6, 2009 6:14:53 AM org.apache.catalina.startup.Catalina load
    INFO | jvm 1 | 2009/08/06 06:14:53 | INFO: Initialization processed in 1157 ms
    INFO | jvm 1 | 2009/08/06 06:14:53 | Aug 6, 2009 6:14:53 AM org.apache.catalina.core.StandardService start
    INFO | jvm 1 | 2009/08/06 06:14:53 | INFO: Starting service cm
    INFO | jvm 1 | 2009/08/06 06:14:53 | Aug 6, 2009 6:14:53 AM org.apache.catalina.core.StandardEngine start
    INFO | jvm 1 | 2009/08/06 06:14:53 | INFO: Starting Servlet Engine: Apache Tomcat/6.0.14
    INFO | jvm 1 | 2009/08/06 06:14:53 | Aug 6, 2009 6:14:53 AM org.apache.catalina.startup.HostConfig deployWAR
    INFO | jvm 1 | 2009/08/06 06:14:53 | INFO: Deploying web application archive cm.war
    INFO | jvm 1 | 2009/08/06 06:14:55 | Aug 6, 2009 6:14:55 AM org.apache.catalina.realm.JAASRealm setContainer
    INFO | jvm 1 | 2009/08/06 06:14:55 | INFO: Set JAAS app name cm
    INFO | jvm 1 | 2009/08/06 06:14:55 | 06 Aug 2009 06:14:55,810 INFO - Reading standard config org/apache/myfaces/resource/standard-faces-config.xml [FacesConfigurator:151]
    INFO | jvm 1 | 2009/08/06 06:14:56 | 06 Aug 2009 06:14:56,200 INFO - Reading config jar:file:/C:/bea/alui/common/container/tomcat/6.0.14/work/cm/localhost/cm/WEB-INF/lib/jsf-facelets.jar!/META-INF/faces-config.xml [FacesConfigurator:250]
    INFO | jvm 1 | 2009/08/06 06:14:56 | 06 Aug 2009 06:14:56,200 INFO - Reading config jar:file:/C:/bea/alui/common/container/tomcat/6.0.14/work/cm/localhost/cm/WEB-INF/lib/opencontrols-framework.jar!/META-INF/faces-config.xml [FacesConfigurator:250]
    INFO | jvm 1 | 2009/08/06 06:14:56 | 06 Aug 2009 06:14:56,200 INFO - Reading config jar:file:/C:/bea/alui/common/container/tomcat/6.0.14/work/cm/localhost/cm/WEB-INF/lib/opencontrols.jar!/META-INF/faces-config.xml [FacesConfigurator:250]
    INFO | jvm 1 | 2009/08/06 06:14:56 | 06 Aug 2009 06:14:56,294 INFO - Reading config jar:file:/C:/bea/alui/common/container/tomcat/6.0.14/work/cm/localhost/cm/WEB-INF/lib/tomahawk-1.1.3.jar!/META-INF/faces-config.xml [FacesConfigurator:250]
    INFO | jvm 1 | 2009/08/06 06:14:56 | 06 Aug 2009 06:14:56,294 INFO - Reading config /WEB-INF/faces-config.xml [FacesConfigurator:411]
    INFO | jvm 1 | 2009/08/06 06:14:56 | 06 Aug 2009 06:14:56,341 WARN - Locale name in faces-config.xml null or empty, setting locale to default locale : en_US [LocaleUtils:52]
    INFO | jvm 1 | 2009/08/06 06:14:56 | OpenLog: verbosity level = 2
    INFO | jvm 1 | 2009/08/06 06:14:56 | OpenLog: Registered application name: OpenControls.winapaqlog4
    INFO | jvm 1 | 2009/08/06 06:14:56 | OpenControls.winapaqlog4
    INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,154 WARN - Ignored element 'dispatcher' as child of 'filter-mapping'. [WebXmlParser:347]
    INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,154 WARN - Ignored element 'dispatcher' as child of 'filter-mapping'. [WebXmlParser:347]
    INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,169 INFO - ServletContext 'null' initialized. [StartupServletContextListener:99]
    INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,169 INFO - Serialization provider : class org.apache.myfaces.shared_impl.util.serial.DefaultSerialFactory [StartupServletContextListener:140]
    INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,185 INFO - Root WebApplicationContext: initialization started [ContextLoader:174]
    INFO | jvm 1 | 2009/08/06 06:14:57 | Aug 6, 2009 6:14:57 AM org.apache.catalina.core.ApplicationContext log
    INFO | jvm 1 | 2009/08/06 06:14:57 | INFO: Loading Spring root WebApplicationContext
    INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,263 INFO - JDK 1.4+ collections available [CollectionFactory:76]
    INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,263 INFO - Commons Collections 3.x available [CollectionFactory:80]
    INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,294 INFO - Loading XML bean definitions from ServletContext resource [WEB-INF/applicationContext-acegi-security.xml] [XmlBeanDefinitionReader:347]
    INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,607 INFO - Bean factory for application context [Root WebApplicationContext]: org.springframework.beans.factory.support.DefaultListableBeanFactory defining beans [acegiFilterChainProxy,httpSessionContextIntegrationFilter,securityRequestFilter,exceptionTranslationFilter,filterSecurityInterceptor,authenticationManager,daoAuthenticationProvider,userDetailsService,authenticationBean]; root of BeanFactory hierarchy [XmlWebApplicationContext:100]
    INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,622 INFO - 9 beans defined in application context [Root WebApplicationContext] [XmlWebApplicationContext:322]
    INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,654 INFO - Unable to locate MessageSource with name 'messageSource': using default [[email protected]9d] [XmlWebApplicationContext:473]
    INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,654 INFO - Unable to locate ApplicationEventMulticaster with name 'applicationEventMulticaster': using default [org.springframework.context.event.SimpleApplicationEventMulticaster@f0f2f1e] [XmlWebApplicationContext:495]
    INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,654 INFO - Unable to locate ThemeSource with name 'themeSource': using default [[email protected]f0fdecd] [UiApplicationContextUtils:83]
    INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,654 INFO - Pre-instantiating singletons in factory [org.springframework.beans.factory.support.DefaultListableBeanFactory defining beans [acegiFilterChainProxy,httpSessionContextIntegrationFilter,securityRequestFilter,exceptionTranslationFilter,filterSecurityInterceptor,authenticationManager,daoAuthenticationProvider,userDetailsService,authenticationBean]; root of BeanFactory hierarchy] [DefaultListableBeanFactory:261]
    INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,888 INFO - Validated configuration attributes [AbstractSecurityInterceptor:220]
    INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,888 INFO - Using context class [org.springframework.web.context.support.XmlWebApplicationContext] for root WebApplicationContext [ContextLoader:189]
    INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,888 INFO - Root WebApplicationContext: initialization completed in 703 ms [ContextLoader:199]
    INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,904 INFO - Initializing filter 'RequestContextFilter' [RequestContextFilter:152]
    INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,904 INFO - Filter 'RequestContextFilter' configured successfully [RequestContextFilter:177]
    INFO | jvm 1 | 2009/08/06 06:14:58 | Aug 6, 2009 6:14:57 AM org.apache.catalina.startup.HostConfig deployWAR
    INFO | jvm 1 | 2009/08/06 06:14:58 | INFO: Deploying web application archive ROOT.war
    INFO | jvm 1 | 2009/08/06 06:14:58 | Aug 6, 2009 6:14:58 AM org.apache.coyote.http11.Http11Protocol start
    INFO | jvm 1 | 2009/08/06 06:14:58 | INFO: Starting Coyote HTTP/1.1 on http-12345
    INFO | jvm 1 | 2009/08/06 06:14:58 | Aug 6, 2009 6:14:58 AM org.apache.catalina.startup.Catalina start
    INFO | jvm 1 | 2009/08/06 06:14:58 | INFO: Server startup in 4531 ms
    INFO | wrapper | 2009/08/06 07:10:02 | User logged out. Ignored.
    INFO | wrapper | 2009/08/06 07:10:03 | User logged out. Ignored.
    INFO | jvm 1 | 2009/08/06 07:10:04 | OpenLog: verbosity level = 2
    INFO | jvm 1 | 2009/08/06 07:10:04 | bid.bootstrap.loglevel=info+
    INFO | jvm 1 | 2009/08/06 07:10:04 | 06 Aug 2009 07:10:04,279 INFO - Closing application context [Root WebApplicationContext] [XmlWebApplicationContext:599]
    INFO | jvm 1 | 2009/08/06 07:10:04 | 06 Aug 2009 07:10:04,279 INFO - Destroying singletons in {org.springframework.beans.factory.support.DefaultListableBeanFactory defining beans [acegiFilterChainProxy,httpSessionContextIntegrationFilter,securityRequestFilter,exceptionTranslationFilter,filterSecurityInterceptor,authenticationManager,daoAuthenticationProvider,userDetailsService,authenticationBean]; root of BeanFactory hierarchy} [DefaultListableBeanFactory:272]
    INFO | jvm 1 | 2009/08/06 07:10:04 | 8-6-2009     7:10:04.279     Info     OpenKernel.Config     Disabled-1249557004060     Wrapper-Shutdown-Hook     com.plumtree.openkernel.impl.config.providers.ConfigXMLFileProvider     Loading config data from C:\bea\alui\configmgr\2.0\bin\../settings/config
    INFO | jvm 1 | 2009/08/06 07:10:04 | OpenControls.winapaqlog4
    INFO | jvm 1 | 2009/08/06 07:10:04 | INFO: PmbApplication.run() exiting forcefully... Releasing one worker thread.
    INFO | jvm 1 | 2009/08/06 07:10:04 | 8-6-2009     7:10:04.810     Info     OpenKernel.Config     Disabled-1249557004060     Wrapper-Shutdown-Hook     com.plumtree.openkernel.impl.config.providers.ConfigXMLFileProvider     Setting subscription data.
    INFO | jvm 1 | 2009/08/06 07:10:04 | container config context:EAS:configurator
    INFO | jvm 1 | 2009/08/06 07:10:04 | OpenLog: Registered application name: ConfigInitialization (local machine only)
    INFO | jvm 1 | 2009/08/06 07:10:04 | OpenLog: Configuration component contained no logging settings. Creating disabled log service.
    STATUS | wrapper | 2009/08/06 07:10:06 | <-- Wrapper Stopped
    ============================================================================
    When we are starting , it stays for couple of mins say 10/15 mins then it stops.
    Can any body have any idea what should i do to get it resolved.

    The logs look odd to say the least on start up and there are couple items when the service gets the signal to shutdown that are suspicious.
    My suggestion is to troubleshoot top down. Clean up the discrepant messages upon startup.
    message : INFO
    Please verify that the file is readable by the current user
    and that the file has not been corrupted in any way.
    One common cause of this problem is running a 32-bit version
    of the Wrapper with a 64-bit version of Java, or vica versa.
    This is a 64-bit JVM.
    Are you attempting change the existing out of box JVM?
    You know it doesn't use sun jvm anymore. It's JROCKIT.
    Make sure your JVM Settings are as follows:
    C:\bea\alui\configmgr\2.0\settings\config\wrapper_base.conf
    # Java Application
    wrapper.java.command=%JRE_PATH%/bin/java
    THEN Verify:
    CMD
    cd C:\bea\alui\common\jre\1.5.0_32\
    java -versionYou should get something like.
    java version "1.5.0_12"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_12-b04)
    BEA JRockit(R) (build R27.4.0-90-89592-1.5.0_12-20070928-1715-windows-ia32, comp
    iled mode)
    In any case, your enviroment seems funky. Use the tips above to troubleshoot.
    Troubleshoot this error first and find out why it thinks your using a 64 bit JVM versus a 32 bit one.
    Last tip: Place Logging into Debug to see whether more logging will give you further insight into the problem.
    Hope this helps!
    Cheers!!!

  • Unable to refresh the schema of FIM MA.Getting an error in Event viewer ""the current version of database is not compatible with the one expected by Forefront Identity Manager service. The current version of database is : 1116. The expected version is :1"

    Hi,
    We have installed FIM MA with an account that have all the sufficient rights.It got created successfully and worked for Full Import and Full Sync. But, due to some version incompatabilities, we have installed a patch.PFB link for the patch.
    http://support.microsoft.com/en-us/kb/2969673/en-us
    Now, we are trying to refresh the schema of FIM MA. While doing that we are facing an error "Failed to connect to database". The user account with which we are connecting has read and write permissions on DB.In the event viewer some errors are
    logged like  "the current version of database is not compatible with the one expected by Forefront Identity Manager service. The current version of database is : 1116. The expected version is :1122" with event ID 3. PFB images for more detailed
    view.
    Please advice how to fix the issue.
    Thanks
    Prasanthi.

    Hello,
    seems to me that you maybe only updated the syncengine but not portal/webservice.
    I had that error once after an recovery from scratch and forgot one of the hotfixes to apply to all services.
    -Peter
    Peter Stapf - ExpertCircle GmbH - My blog:
    JustIDM.wordpress.com

  • Solution Manager Service Desk & ChaRM Integration

    Hi All,
    I have query on integration between Solution Manager Service Desk & ChaRM. As we know u2013 it is possible to create a change request from service desk if the incident requires a change in the satellite system. In this case even we can see the list of all change requests (if we raise more than one) as connected / reference documents.
    But we observe that it is possible to close the Service Desk request even if the ChaRM request is not closed / abandoned.
    Just want to know if there  is any configuration in Service desk, using which we can prevent the user from closing the incident in sevice desk till the time the ChaRM change request has not got closed.
    Any pointers in this regard are welcome. Thanks a lot.
    Best regards,
    vithal

    You can control using BADI development. Any Check or Save ( ORDER_SAVE ) badi you can write the condition based on the change document availablity.

  • Solution Manager Service Desk: BC sets

    Hi,
    While configuring the SolMan Service Desk Scenario (in IMG activities) "Basic BC Sets for Configuration" few doubts I have:
    1. This list of BC Sets need to be done on each Client (Devp / QA & Prd)? with reference to Note: 898614
    SOLMAN40_SDESK_BASICFUNC_000
    SOLMAN40_SDESK_ACT_ADVCLOSE_001
    SOLMAN40_SDESK_ACTIONLOG_001
    SOLMAN40_SDESK_TPI_ACT_AST_001
    2. Can I change the Production system role while activating BC Sets On that Client?
    3. Due to some reasons if i missed to change the role from Producation to XYZ and activated, is there will be any impact on the system?
    Please suggest me on the above points.
    Thanks & Regards,
    Jose

    Hi,
    refer to following notes.
    These BC sets actually carry out some standard setting across your system.
    Note 898614 - Solution Manager Service Desk: BC sets
    Note 931196 - New text types for Service Desk in SAP Solution Manager
    Pls assign pts.

  • Solution Manager Service Desk - Segregation and Customization of HR Tickets

    All -
    The Solution Manager Service Desk is a great tool for incident management in a system landscape that includes SAP, as well as other technologies.
    I wanted to find out whether tickets that contain sensitive information (HR-related) can be segregated and "hidden" from support team members that are not supporting any HR functions.
    Also, is there a way, assuming tickets can be segregated by function or support team, that the email message users receive upon the creation of the ticket can be custom tailored?
    Thank you in advance!
    Scott Watson

    Hi Scott,
    Yes it is possible and there are various ways to achieve it
    for e.g you can use the security concept below to hide from non relevant team members using
    authorization object CRM_ORD_LP
    check this link
    http://wiki.sdn.sap.com/wiki/display/SMAUTH/CRM_ORD_LP
    also this one
    http://wiki.sdn.sap.com/wiki/display/SMAUTH/UC00035
    hope this resolves issue
    Regards
    Prakhar

Maybe you are looking for