Capital Y not working with SHIFT

Shift y does not work on my OSX 10.7. I can do a Caps Lock Y, but not shift. Anyone else have the same problem? It seems to be my only letter having this problem.

Hey
I am having the same issue. Shift key works fine, Y key works fine normally. Together = nothing. How did you go resolving this? I am tempted to buy a new keyboard to see if that works

Similar Messages

Apple wired keyboard - certain keys not working with shift

I treated myself to a new Apple wired keyboard MB110B/A for my mac mini.
My previous keyboard worked fine, however the new keyboard causes the computer to enter the Hardware Test mode every time the computer is restarted. The computer only starts normally without the keyboard connected (or with my old keyboard connected).
Once the computer has started, if I plug the new keyboard in, it appears to work normally with the following exceptions. The following keys do not register when the "shift" key is pressed: 2, w, s, x. This fault does not occur with my old keyboard.
As these keys are in a line, I think there may be a wiring fault inside the keyboard. If so, would this explain the computer entering Hardware Test mode every time it is started with the keyboard connected?
Thanks in advance.

Definitely sounds like a hardware fault in the keyboard to me. I assume it's the same whichever USB port it's connected to? (and if you plug it into another Mac, too)?
Of course, as that keyboard is glued together in final assembly, it's completely unrepairable.
If it's a reproducible fault (and new anyway): take/send it back for replacement. You shouldn't have any trouble with Apple arguing.

Debit/Credit Shift not working with report painter

Dears,
We have defined debit/credit shift while defining financial
statement version. This functionality working well with F.01 however its not
working with report painter results. any help will be highly appreciated
Regards,
FR

Hi Dave,
I have gone back to the books (JP Terry's "Creating Dynamic Forms with Adobe LiveCycle Designer") and think we can improve on things...
var oFields = xfa.resolveNodes("ViolationsText[*].DebitVal"); // looks to resolve the repeating rows (I think)
var nNodesLength = oFields.length; // assigns the number of rows to a variable
var sumTotal = 0; // this is a temporary holding variable for the total, during the loop
for (var i = 0; i < nNodesLength; i++) // this loops through as previous example
     if (oFields.ViolationsText[i].resolveNode("DebitVal").rawValue == "C")
          sumTotal = "";
          i = nNodesLength; // stops the loop
     else
          sumTotal += oFields.ViolationsText[i].resolveNode("DebitVal").rawValue;
this.rawValue = sumTotal;
This would go in the calculate event of your Total Debit Points field. I would be amazed if it worked first time. I haven't run through LC. Give it a lash!! (a try!!)
Good luck,
Niall

Right shift key not working with middle row of letters

The right shift key on my Macbook Pro does not work with the middle row of letters. It works with all other letters and numbers, just not A-L. Nothing out of the ordinary happened, it just stopped capitalizing

Try resetting your SMC and PRAM.
Resetting the System Management Controller >>
If that does not work, test it using an external keyboard.
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Macsimum News Associate Editor  Creator of 'Mac611 - Mobile Mac Support'

Using shift key not working with bluetooth keyboard

Am I missing something here? Or does the shift key not work with the iphone using a bluetooth keyboard? I'm using the logitech K810 for reference on iphone 6 iOS 8.1

The shift key works just fine on my Bluetooth keyboard. So I would imagine this is an issue with your keyboard.

Modifer keys do not work with mouse in Illustrator

Below is a copy of a bug report I just submitted to Adobe. I don't suppose any users have run across this and found a solution or workaround?
I found someone else with this problem in an archived topic thread, but the only response that poor fellow got was an accusation of not following instructions (His problem wasn't user error, BTW).
Thanks
******BUG******
Concise problem statement:
Modifer keys do not work with mouse: For example, free transform or rotate behaviors that require "Click-Ctrl" .
Steps to reproduce bug:
1. select object
2. select free transform tool
3. left click (without releasing) a corner of the bounding box.
4. start dragging
5. press ctrl
Results:
object behaves as though the ctrl key was not pressed. i.e. the cursor does not change shape and the object scales rather than distorts.
Expected results: The cursor should change shape as the ctrl key is pressed and the object should distort rather than scale.
Additional information: This behavior is intermittent. Occasionally Illustrator recognizes the "Click-Ctrl" combination and behaves exactly as the help file predicts it will. The cursor changes shape and the object distorts rather than scales. I can offer no rhyme or reason for when Illustrator will behave as advertised and when it will ignore the modifier keys.
The example above involves the free transform tool, but the problem occurs just as often with other tool behaviors that require a modifier key + mouse combination.
Primarily using Wacom Intuos3 tablet. (with latest drivers), but have also tried combinations with microsoft mouse or both mice installed.
Also, immediately after an occurrence Illustrator bug, left AI open, went to a different app that uses mouse+modifier (Ctrl+Click). That different app recognizes Ctrl+Click with no problems whatsoever.

Thanks Guys,
Good to know it's working for you. I guess that's the nature of intermittent bugs. Of course, Adobe's bug report form has a field for version, which I, of course, filled in. Sorry I didn't add it to this post. I'm using the latest version CS3 v13.0.2.
Stephen,
Sorry I was not more clear when I said, "For example, ...". I was talking about the modifier keys not working with several different tools. The Free Transform tool advertises functionality that is supposed to work with a "Click (down, but don't release)then hold down Ctrl" combination. The Rotate tool advertises a behavior that is supposed to work with an "Alt-Click" combination. These are just 2 examples of the modifier keys not working. I focused primarily on one example in the bug report(ctrl after and in addition to click in the free transform tool, not alt-click in the rotate tool).
Here is what I expect(quoted from Adobe's CS3 help file)
(From the "Distort Objects with the Free transform tool" help topic)
"Select one or more objects.
Select the Free Transform tool .
Start dragging a corner handle on the bounding box (not a side handle), and then do one of the following:
Hold down Ctrl (Windows) or Command (Mac OS) until the selection is at the desired level of distortion.
Hold down Shift+Alt+Ctrl (Windows) or Shift+Option+Command (Mac OS) to distort in perspective."
(from the "Rotate an object by a specific angle" help topic:)
You can control the exact angle of rotation with the Rotate command.
Select one or more objects.
"Do one of the following:
To rotate around the center point, choose Object > Transform > Rotate, or double-click the Rotate tool.
To rotate around a different reference point, select the Rotate tool. Then Alt‑click (Windows) or Option‑click (Mac OS) where you want the reference point to be in the document window.
Enter the rotation angle in the Angle text box...."
These Tool based mouse-key combinations do occasionally work as they are supposed to, so I know what the expected results are supposed to look like, but whether they work or not appears to depend on the phase of the moon, the day of the week, and the color of the president's underwear.
Other non-tool based mouse-key combinations in Illustrator work consistently all the time - Ctrl-A for Select All as just one example that always works.
Thanks Again

I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries)

I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries).
Thank you for your help! - I did try looking for all available specs about Keynote on the Apple iTunes website, and found nothing that could help me. HELP!

1
Close all iWork applications
2
Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
3
empty the trash
4
shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
5
Reinstall Keynote by logging into the Mac App Store using download / install

I had an iphone 4s and it worked nice with facetime and imessage using my phone number but it was stolen on December so I buy a new iphone 4s using the same cellphone number but now imessage and facetime does not work with my number, it only works with

I had an iphone 4s and it worked nice with facetime and imessage using my phone number but it was stolen on December so I buy a new iphone 4s using the same cellphone number but now imessage and facetime does not work with my number, it only works with my apple ID. Please Help me I speak Spanish so if my English is not ok I´m sorry about it.
Do you think that apple has to reset in their database of the old serial number attached with my phone number and that’s why I can´t activate imessage and facetime with my number in the new iphone 4s??

I understand all of this Meg; that is why I bought an Iphone; but never expected my phone not even give a at least a 24 or even 12 hours....I work 12 hour shifts and also would expect to have to charge each night but not twice a day or more. I am not always somewhere I can charge my phone.
Your points are true; however it doesn't help me......

I just spent an hour composing a reply in a thread ("Firefox will not work with paypal"), only to see "You don't have permission" at Submit - total loss!

I was logged in to reply in the thread "Firefox will not work with paypal". I spent the better part of an hour carefully composing that reply, testing cases, providing links, etc... [Hint: Firefox, unlike other browsers, has a problem with scripts from server paypalobjects.com.] Because I had taken so long to compose the reply, it seemed like a good idea to check it via the Preview button, but I got a message that that function was not available. Of course I decided to submit it anyway, but when I hit "Submit" I got a message "You don't have permission ..." - at which point I was (stupidly) on a different page with that message, and everything I had composed was gone!

It might be too late for this, but it's what I use when this happens. Prepare for deep nerdom:
* Open the web console below the error page by pressing Ctrl+Shift+k
* Right-click the blank area and turn on logging of the request and response bodies
* Resubmit the request by clicking the reload button
* Click the new URL that appears to open the viewer showing the headers and bodies
There you may be able to copy out the content of your post from the Request Body. You can use a word processor or text editor to find/replace the + characters back to spaces.

Tascam US-428 not working with Lion

Tascam US-428 not working with Lion - Does anybody know why and what I can do to fix it?

The Tascam US-428 is a great unit, but like all businesses, Tascam desires to keep you purchasing their equipment and not stay with your old legacy items. If they would consider servicing legacy units, possibly most may stay with Tascam. But this keeps the machine moving when you "force" customers to upgrade their products when new technology shifts..
The "only" reason US-428 users need to upgrade and put aside the unit is if they need 64 bit functionality. I did not have crashing when I loaded Logic in 64 bit mode due to the ability to access my 8 gigs of memory...and is the "only" reason why I need to go 64 bit. 32 bit functionality is limited to 4 gigs of memory. Lion by default is 64 bit, so that is a plus.
But...if Tascam would continue to service some of the legacy units like the Tascam US 428, then some of us would not go to their competitors and may stay brand loyal. I think Alesis has something simular and along the same portability as the Tascam US 428, so some might have to jump ship with Tascam.
If enough people called up Tascam asking about the US 428 or surfs their website and looks for the US 428 (I am sure they keep track of where people are going on their site), they might reconsider....
I have been a Tascam user for may years, but "if" they would put out a driver for the US 428 for Lion, I may stay with them...but they leave us with little choice but to look for something else...they do not have something comparable to the unit right now.

I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

The sound seems very faint but can here static on playback.

My operating system windows XP not working with photoshop cloud, why not?

I need to add 2 more licences for photoshop cloud and I'm being told my operating system windows XP does not work with Photoshop cloud. We already have 2 pcs using it in our office so why not?
Please help
Roy

Do you have the latest version of iTunes? If not, get it at:
http://www.apple.com/itunes

Adobe creative cloud eea 1.5 is not working with our asus Eee box , celeron j1900 2.00 ghz, 4gb of ram, 64bit. can settings be changed in adobe?

adobe creative cloud eea 1.5 is not working with our asus Eee box , celeron j1900 2.00 ghz, 4gb of ram, 64bit. can settings be changed in adobe?

A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Application is not working with mouse

Dear All,
We have a strange issue in the our application (Oracle form) in the one of our client machine.
Some times the forms are not able to work with the mouse but is able to work with the keyboard. After one or two machine restart its again working. When the issue occur we can able to work in other applications using mouse.
Our Applications server is in Other country and client are accessing from India.
This occurs for some user and not for all.
Application server Version 10.1.2.0.2.
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit
Java Plug-in version 1.6.0_31 .
Please any info will help us lot.

Thank you for the quick replies Michael Ferrante and HamidHelal.
But since its occurring for some users (perticulary indian users) and some times. And also its occurring in production environment not in development environment.
Even the java control panel is not working with mouse.
For other country customers everything working fine.
So its difficult for me to apply the patch with these uncertainties.
Checking with fresh java installation and let you know the status.
Thanks.

Voice Memo is not working with iOS 8.2

Voice Memo Records is not working with iOS 8.2. how to fix it?

Voice Memo Records is not working with iOS 8.2. how to fix it?

Capital Y not working with SHIFT

Similar Messages

Maybe you are looking for