Capitalisation process for AUC

Please explain the capitalisation process of AUC ?
Thanks
Kalyan

hi,
Create separate asset class for AUC and create asset under the assets and do purchase against this asset no. then you want to settle this asset to main asset class. so AUC asset will not have any depreciation key. but receiver of the asset number will have the depreciation key.
settle the AUC asset to main asset class through AIAB and AIBU. Main asset will capitalised once he got the value from sender asset.
reward points.
govind

Similar Messages

Best practice for AuC capitalization

HI All..
At present we are following the steps given below for AuC capitalisation.
1. Teco & close production orders.
2. AuC capitalization
While doing this i came across a issue of doing invoice payment after closing the production orders.
When trying to enter the invoice, system gives an error message saying that production order is closed.
1. Is it necessary to revoke the production order to do this?
2. Can I know the Best practice for AuC capitalization..
Thanks in advance.
Ava

You will have to revoke the TECO on the order to do an invoice transaction for the particular order.
Normally, we don't TECO unless all relevant transaction have been completed.
Regards,
Vishal.

Internal Order Process for Assets

Hi experts,
Can you please provide the process from internal order to settlement for assets.
And is the process is same for normal assets and AUC?.
Can we change the Order Status for AUC?
Thanks,
Ravi.

Dear Ravi,
1. first create an internal order through KO01. That internal order type should be for investment purpose.
2. Give the relevant detials and go to investment tab and give investment profile.
3 Then in toolbar go to extras and select "asset under construction". An asset under construction would be created and give the details of this asset.
4. Then release the internal order in KO02.
5. Then go to GB60 and post a invoice with this internal order as account assignment object.
6. GO to KO02 and in extras see the order balance. that amount would be reflected in the order.
7. now go to KO88 and execute the internal order through which your internal order will be credited and AUC which you created would be debited.
8. Now go to KO02 and see the order balance it would show 0 as it is moved to AUC.
9. Now to go to settement rule and give the asset to which u want to transfer this amount and take the category as FXA and give the detials.
9. now go to KO02 and change the status of internal order to "TECO complete".
10 Now go to KO88 and execute the order and now the AUC is credited and your asset is debited.
This is the exhaustive steps which i think wil solve your purpose.
But make sure the configuration about the order type and investment profile are properly maintained.
Thanks
sap firdo

Internal order settings for Auc

Dear Experts
An AuC can be directly distributed and settled to asset using AIAB & AIBU respectively.
But when I want Internal order for Auc my understanding is that i have to configure order type. Cretae an IO master under this order type and Iam not what other config steps are to be followed?
And in some threads I read that the order should be an investment order with investment profile. I am not clear with the actual process to be followed.
I worked on FI but these days looking into to Controlling. After relevant config how do I post auc postings to this IO i.e., using which tcode and how do I identify the postings belong to Auc under this Internal order. Please guide me.
Thanks & Regards
Komal

In your order type ( may ref - AC00 - std order type) , make Investment profile as input.
Create Investment profile thru Tcode - OITA ( ref std 000003)
While creating IO once you input Inv profile - 000003 , apop up will come & will ask to create AUC (asset) with asset class maintained in Inv Prof Config above.
Then whatever you post to the IO will be posted to AUC & data can be seen thru tcode - KOB1 or AS03 - Values
The Io will appear in Asset master of AUC.

Error in executing a process for compilation for jsp

We have an iView which has jsp pages in it. We deployed the par & try toaccess the iview & we get an exception. The issue is that the iview has a jsp page. At the run time, this jsp is converted into a .java file
without problem. But EP engine is having issues compiling this java fileinto .class file.
On the other hand this same iview works just fine on our windows installation. Only Solaris EP install is having problems. The version onwindows as well as on Solaris is EP6 SP9.
Here is the exact version on the solaris EP:
sap.com/SAP-JEECOR 6.40 SP9 (1000.6.40.9.0.20041119045253) 20041122132733
sap.com/SAP-JEE 6.40 SP9 (1000.6.40.9.0.20041119045409) 20041122132741
When I copy the .class file from windows to unix machine, the iView works fine. Here is the exception I am getting:
>>> JSPCompiler >>> error
[email protected]a188b
[EXCEPTION]
com.sapportals.portal.prt.servlets_jsp.server.compiler.CompilingException:
Error in executing a process for compilation
at
com.sapportals.portal.prt.servlets_jsp.server.compiler.impl.J2eeCompiler_6_30.launchCompilerProcess(J2eeCompiler_6_30.java:574)
at
com.sapportals.portal.prt.servlets_jsp.server.compiler.impl.J2eeCompiler_6_30.compileExternal(J2eeCompiler_6_30.java:370)
at
com.sapportals.portal.prt.servlets_jsp.server.compiler.impl.J2eeCompiler_6_30.compile(J2eeCompiler_6_30.java:672)
at
com.sapportals.portal.prt.servlets_jsp.server.jsp.JSPParser.parse(JSPParser.java:2143)
at
com.sapportals.portal.prt.servlets_jsp.server.jsp.JSPCompiler.compile(JSPCompiler.java:76)
at
com.sapportals.portal.prt.servlets_jsp.server.jsp.JSPCompiler.run(JSPCompiler.java:122)
at
com.sapportals.portal.prt.core.broker.JSPComponentItem.compileJSP(JSPComponentItem.java:279)
at
com.sapportals.portal.prt.core.broker.JSPComponentItem.getComponentInstance(JSPComponentItem.java:129)
at
com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.service(PortalComponentItemFacade.java:355)
at
com.sapportals.portal.prt.core.broker.PortalComponentItem.service(PortalComponentItem.java:934)
at
com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:435)
at
com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:527)
at
com.sapportals.portal.prt.component.AbstractComponentResponse.include(AbstractComponentResponse.java:89)
at
com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:232)
at com.sapportals.portal.htmlb.page.JSPDynPage.doOutput(JSPDynPage.java:76)
at
com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:129)
at
com.sapportals.portal.htmlb.page.PageProcessorComponent.doContent(PageProcessorComponent.java:134)
at
com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at
com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at
com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at
com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at
com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at
com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:646)
at
com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at
com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at
com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at
com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at
com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:232)
at
com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
at java.security.AccessController.doPrivileged(Native Method)
at
com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at
com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:153)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:385)
at
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:263)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:340)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:318)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:821)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:239)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at
com.sap.engine.services.httpserver.server.Processor.request(Processor.java:147)
at
com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
at
com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at
com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
I am having the same issue with another iview which has jsp page in it.
The web dynpro iview works fine.

Hi, seems like there's some typo in your jsp. Check the .java file listed with a java editor (like eclipse or devstudio.). Maybe you'll find the typo this way faster.
Most often, a multiline page import hampers jsp compilation,
e.g.
<%@page import="java.util.List,
java.util.Map"%>
needs to be
<%@page import="java.util.List,java.util.Map"%>
Regards,
Armin

Error in executing a process for compilation

Hi:
Our portal version is 6.0.2.28.0 (SAPJ2EE PL29)
we have the following problem:
1.- the developer upload a component in portal, but when he tries to run it, the following error appears:
Mar 28, 2005 4:22:06 PM # Client_Thread_8 Fatal >>> JSPCompiler >>> ERROR in Compiling :JSPFileInfo :4782283
JSP File : /usr/sap/J2EE_DP3/j2ee/j2ee_00/cluster/server/services/servlet_jsp/work/jspTemp/irj/root/WEB-INF/portal/portalapps/PRUEBA
_PCCLibragestMostrarPlantillas/pagelet/MostrarPlantillas.jsp
Class Name: sapportalsjspMostrarPlantillas
Java File : /usr/sap/J2EE_DP3/j2ee/j2ee_00/cluster/server/services/servlet_jsp/work/jspTemp/irj/root/WEB-INF/portal/portalapps/PRUEB
A_PCCLibragestMostrarPlantillas/work/pagelet/_sapportalsjsp_MostrarPlantillas.java
Package Name : pagelet
Class File : /usr/sap/J2EE_DP3/j2ee/j2ee_00/cluster/server/services/servlet_jsp/work/jspTemp/irj/root/WEB-INF/portal/portalapps/PRUE
BA_PCCLibragestMostrarPlantillas/work/pagelet/_sapportalsjsp_MostrarPlantillas.class
Is out dated : false
com.sapportals.portal.prt.servlets_jsp.server.compiler.CompilingException: Error in executing a process for compilation
2.- If I stop/start SAPJ2EE the component, which was uploaded before,can be run without problem, but if you upload it again,when you try to run it again, the compilation error appears
Any suggestion???
Thanks

Hi:
the problem was not resolved deleting/uploading the components, the problem was resolved increasing the memory in the host and tuning the JVM memory parameters.
In our host the memory was reduced and this was the origin of the problem
Thanks

Error in executing a process for Flex compilation ....exceeds 32K...

Hi,
deployin my model i get the following error-message.
"Error in executing a process for Flex compilation, Error: Branch between 64935 and 97770 around line 0 exceeds 32K span. If possible, please refactor this component.
Error: Branch between 64935 and 97770 around line 0 exceeds 32K span."
Do i delete a sort-element from my model it is deployed very well. So what does this message exactly mean and how can I locate where the error occurs and how can i fix that problem because i need this sort-element to be in my model.
Thanks for your help!
Tobias

Hi Tobias,
You are receiving this error due to a current limitation in the Flex server. How you can fix this is to split the iView you are currently working on into two iViews, and embed one within the other. This will decrease the size of the current iView you are receiving the error for and eliminate this problem.
Hope this helps
Cheers,
Scott

Regarding Goods Reversal and Goods Issue process for Production orders

Hi,
I have a issue regarding Goods Reversal and Goods Issue process for Production orders.
Actually I am having a Z - Function Module in that i am passing production order number other details to
make the Goods Reversal happen.
The code for the above is as below:
 i_mvtit-material = wa_mdfa-matnr.
 i_mvtit-plant = i_resb-werks.
 i_mvtit-spec_stock = 'Q'. "New
 i_mvtit-stge_loc = 'ZWIP'.
 i_mvtit-stge_type = i_resb-lgtyp. "New
 i_mvtit-batch = i_resb-charg. "New
 i_mvtit-orderid = i_resb-aufnr.
 i_mvtit-spec_stock = i_resb-sobkz.
 i_mvtit-entry_qnt = i_resb-enmng.
 i_mvtit-entry_uom = i_resb-erfme.
 i_mvtit-entry_uom_iso = i_resb-meins. "New
 i_mvtit-wbs_elem = v_frwbs.
 i_mvtit-move_type = '262'.
 i_mvtit-xstob = 'X'.
 i_mvtit-gr_rcpt = i_resb-aufnr. "New
 i_mvtit-reserv_no = i_resb-rsnum.
 i_mvtit-res_item = i_resb-rspos.
 APPEND i_mvtit.
* HEADER ELEMENTS
 k_gmvt_code-gm_code = '03'.
 k_gmvt_head-pstng_date = sy-datum.
 k_gmvt_head-doc_date = sy-datum.
* CREATE GOODS MOVEMENTS
 CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
 EXPORTING
 goodsmvt_header = k_gmvt_head
 goodsmvt_code = k_gmvt_code
 TABLES
 goodsmvt_item = i_mvtit
 return = i_return.
The Above code does the Goods Reversal but then i will update one Z Table with fields like
Production Order Number[AUFNR], Number of Reservation[RSNUM], Item Number of Reservation [RSPOS], Material Number [MATNR], Requirement Quantity [BDMNG], WBS element[PSPNR] etc. If Above BAPI runs sucessfully.
That is happening correctly.
But Then actual issue is i have do Goods Issue for those Z-Table records.
There i will give Production order Number's & Storage Location in Selection-Criteria.
Then i need to do Goods Issue for that order.
The code i had written as follows.
* POPULATE VALUES FOR BAPI CALL
 i_mvtit-material = i_zpsi7603_01-matnr.
 i_mvtit-plant = i_resb-werks.
 i_mvtit-spec_stock = 'Q'. "New
 i_mvtit-stge_loc = p_sloc.
 i_mvtit-stge_type = i_resb-lgtyp. "New
 i_mvtit-batch = i_resb-charg.
 i_mvtit-orderid = i_resb-aufnr.
 i_mvtit-spec_stock = i_resb-sobkz.
 i_mvtit-entry_qnt = i_resb-enmng.
 i_mvtit-entry_uom = i_resb-erfme.
 i_mvtit-entry_uom_iso = i_resb-meins. "New
 i_mvtit-wbs_elem = v_frwbs.
 i_mvtit-move_type = c_261.
 i_mvtit-mvt_ind = 'F'. "New
 i_mvtit-xstob = c_x.
 i_mvtit-gr_rcpt = i_resb-aufnr. "New
 i_mvtit-reserv_no = i_resb-rsnum.
 i_mvtit-res_item = i_resb-rspos.
 APPEND i_mvtit.
* HEADER ELEMENTS
 k_gmvt_code-gm_code = c_03.
 k_gmvt_head-pstng_date = sy-datum.
 k_gmvt_head-doc_date = sy-datum.
* CREATE GOODS MOVEMENTS
 CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
 EXPORTING
 goodsmvt_header = k_gmvt_head
 goodsmvt_code = k_gmvt_code
 TABLES
 goodsmvt_item = i_mvtit
 return = i_return.
 CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
 EXPORTING
 wait = c_x.
 READ TABLE i_return INDEX 1.
 IF i_return-type EQ c_s.
 DELETE FROM zpsi7603_01 WHERE aufnr = i_resb-aufnr AND
 rsnum = i_resb-rsnum AND
 rspos = i_resb-rspos.
 ENDIF.
If i run above code for Goods Issue it is giving error can anybody tell me what changes i need to do to make it work.
The Error Message i am getting is as below:
Qty and / or "delivery completed" ind. or final issue ind. are missing
Error Number for the above is : 264.
Can anybody solve my issue.
Any help will be appreciated.
Thanks in advance.
Thanks & Regards,
Rayeez.

Hi,
Thanks boss.
It is working now correctly.
The issue is the i_mvtit-XSTOB should be equal space in case of Goods issue while incase of Reversal it should be equal to X.
Thanks for ur efforts.
I had awarded you points.
Thanks a lot.
Thanks & Regards,
Rayeez.

Process for porting phone # to FIOS?

Can someone point me to instructions on how to port my # from Comcast/Xfinity to FIOS?
We had FIOS for years until five weeks ago, switched to Xfinity and ported the home # I've had for 10 years, then switched back to FIOS yesterday. During the ordering process with FIOS we were clear that we wanted to port in our #. During the last contact with FIOS before installation they told my husband to wait a week after switching to call to port the #, and the installer yesterday issued us a new # (which he said would be temporary). FIOS service was closed by the time the installation was done yesterday, and is closed today. What is the process for porting the #? Is there a place online we can do this when FIOS is closed? How long before Xfinity releases the #? If I lose this # that is connected to basically every other account I have, I will be furious.

In March I switched my phone from Vonage to VZ digital voice. I did this so I was able to get a better bundled price.
I informed the VZ CS that my intent is to move my phone from Vonage to VZ. They told me that it will take 5 days for this to occur and a truck roll would need to be scheduled. On the day of the appointment my number continued to work with vonage. The VZ tech arrived, wired up the home phone line to the ONT and the phone line was dead. She went to the truck and whatever magic occurred she returned 5 minutes later and told me to see if I had dial tone. Upon picking up the phone there was dial tone. I called my cell and it displayed the caller ID of my phone. I then called my home phone and it worked too.
Since you already have dial tone I'm sure no truck roll will be necessary. I do understand there is a 5 day porting process but once you call TS and tell them your intent it should be pretty straight forward. When I plaecd my original order it was documented on that order. Not sure if this helps but hope it does.
Jim

Increase the number of portions in process for each conversion object

I experts,
I configured SAP TDMS 3.0 with SP 14 to transfer test data from QAS to DEV (both is ECC 6.0) for the first test with TDMS TIM (Time Based Reduction).
The data transfer phase is still running (99% - 60hs running). We analyzed the Display Runtime Information report and see that objects of conversion with similar calc. records and calc. GBytes have very different the Net Runtime.
TMDS currently is working with four objects of conversion, processing a portion of each.
Conversion objects that are running are:
- Z_LTBP_002
- Z_TSEGE_002
- Z_VEVW_002
- Z_YST27_002
We check in the receiver system, and we see that is use only one DIA process to update the each table.
How can increase the performance of the update? Is correct that use only 1 DIA process for this??
Can I increase the number of portions in process for each conversion object?
Any help is greatly appreciated.
Regards,
Sergio

Hi,
Check SAP Note 916763 - TDMS performance composite SAP note
Note 890797 - SAP TDMS - required and recommended system settings
Thanks
Sunny

Standard Process for Credit Memo & Debit Memos in CRM

Dear all,
What is the standard process for Credit Memo and Credit Memo Creation within CRM Complaint Transaction?
We can successfully replicate Return Items and Replacement Items in ECC Return Order
But I don't know how to process Credit Memo and Debit Memo in ECC.
What are the Accounting Implications takes place once we create and release the credit memo / Debit memo in CRM Complaint Transaction?
How to see the entire document flow?
I can create Credit Memo for a Returned Line Item in CRM without any errors. But I could not see any follow-up transaction or process either in CRM or ECC.
Kindly educate me in this regard. Your suggestions are highly appreciated
Best regards
Raghu ram
Edited by: Raghu Ram on Jun 23, 2010 6:29 PM
Edited by: Raghu Ram on Jun 25, 2010 8:30 AM

Hi suchi,
The following would be very useful to you.
To reduce implementation time for print forms development, SAP has created a set of the most commonly used forms - Preconfigured Smart Forms:
SD: Invoice, Quotation, Contract, Delivery Note, Order Confirmation, Scheduling Agreement, Inquiry, Cash Sales, Picking List
MM: Purchase Order, Request for Quotation, Contract, Delivery Schedule, Good Issue (3 scenarios), Good Receipt (3 scenarios)
FI: Dunning Notice
All can easily adapt these forms to their requirements, saving time and money.
Hope this information has been useful to you.
if you would like to have a smartform of your own i.e a Z or a Y then there is an option to get a sap script copied onto a smartform.
the sap script for the same is -> F140_DOCU_EXC_01
Go to Txn SMARTFORMS and just put the required smart form name in FORM field and then go to the menu bar: Utilities-> Migrate SAPScriptForm and juts type in the Script name which is given above(i.e F140_DOCU_EXC_01 )
I hope this will be an amicable solution.
if helpful pls reward.
Thanks
Venugopal

Job getting cancelled for 'Chain not processed for date-2007031920070318' ?

Hi All,
We have 2 process chains running only on weekdays - one for sales and the other for billing. A cancelled job is created for one of the process chains with the job log message as 'Chain not processed for date-2007031920070318' for the not run days whereas the other does not have any issues though the same monitor job program runs for both. The difference is only in the variant but nothing much other than that its maintained for 2 different chains.
   We also debugged the monitor job program. It basically does nothing other than displaying messages depending on the status of the chain log.
Please let me know your suggestions as to why it happens.
Thanks,
krishna

it is also giving following error message:
Caution: Program has changed
Caution: At time of termination, Active source code no longer available and after above two statements its giving sign "?" before every statement in below manner:
024300 ?     lit_ekpo_dummy1[] = it_ekpo[].
024310 ?     DELETE lit_ekpo_dummy1 WHERE ebeln NE tab1-ebeln.
024320 ?     DESCRIBE TABLE lit_ekpo_dummy1 LINES count01.
024330 ?
024340 ?     REFRESH lit_ematn_dummy[].
024350 ?     lit_ematn_dummy[] = lit_ematn[].

Error: 1056603 Unable to spawn process for application [AppName]

Hi,
After a fresh installation of Essbase Server (11.1.1.4), I'm experiencing the following error when attempting to perform basically any action on any Application (Start, Stop, Delete) through EAS:
*Error: 1056603 Unable to spawn process for application [Demo]. Please ensure that adequate memory is available.*
System memory seems abundant at around 5% usage with all relevant services started, but I even doubled it (since it's a VM) to 16Gb just to make sure, the issue persists.
Having a look at the Essbase server log, I didn't find any additional info that could be helpful:
[Thu Oct 11 15:07:03 2012]Local/ESSBASE0///2412/Info(1051160)
Received Validate Login Session request
[Thu Oct 11 15:07:03 2012]Local/ESSBASE0///2380/Info(1051001)
Received client request: Get App and Database Status (from user [admin])
[Thu Oct 11 15:07:03 2012]Local/ESSBASE0///568/Info(1051001)
Received client request: MaxL: Execute (from user [admin])
[Thu Oct 11 15:07:03 2012]Local/ESSBASE0///568/Error(1056603)
Unable to spawn process for application [Demo]. Please ensure that adequate memory is available.
[Thu Oct 11 15:07:03 2012]Local/ESSBASE0///568/Error(1054001)
Cannot load application Demo with error number [1056603] - see server log file
[Thu Oct 11 15:07:03 2012]Local/ESSBASE0///568/Warning(1051003)
Error 1054001 processing request [MaxL: Execute] - disconnecting
And when the Essbase service is started, essbase.log also seems to be pretty normal:
[Thu Oct 11 15:18:13 2012]Local/ESSBASE0///2376/Info(1051001)
Received client request: Logout (from user [admin])
[Thu Oct 11 15:18:13 2012]Local/ESSBASE0///2376/Info(1051037)
Logging out user [admin], active for 29 minutes
[Thu Oct 11 15:18:19 2012]Local/ESSBASE0///1236/Info(1051243)
Exclusive operation security file compaction started. This may take a while
[Thu Oct 11 15:18:19 2012]Local/ESSBASE0///1236/Info(1051244)
Security file compaction completed
[Thu Oct 11 15:18:19 2012]Local/ESSBASE0///1236/Info(1051052)
Essbase Server - finished
[Thu Oct 11 15:18:23 2012]Local/ESSBASE0///2620/Info(1051283)
Retrieving License Information Please Wait...
[Thu Oct 11 15:18:23 2012]Local/ESSBASE0///2620/Info(1051286)
License information retrieved.
[Thu Oct 11 15:18:29 2012]Local/ESSBASE0///2620/Info(1051199)
Single Sign-On Initialization Succeeded !
[Thu Oct 11 15:18:29 2012]Local/ESSBASE0///2620/Info(1051232)
Using English_UnitedStates.Latin1@Binary as the Essbase Locale
[Thu Oct 11 15:18:34 2012]Local/ESSBASE0///2620/Info(1051134)
External Authentication Module: [Single Sign-On] enabled
[Thu Oct 11 15:18:34 2012]Local/ESSBASE0///2620/Info(1051051)
Essbase Server - started
[Thu Oct 11 15:18:34 2012]Local/ESSBASE0///2620/Info(1051243)
Exclusive operation security file compaction started. This may take a while
[Thu Oct 11 15:18:34 2012]Local/ESSBASE0///2620/Info(1051244)
Security file compaction completed
[Thu Oct 11 15:18:34 2012]Local/ESSBASE0///2620/Info(1051052)
Essbase Server - finished
[Thu Oct 11 15:18:34 2012]Local/ESSBASE0///2120/Info(1051283)
Retrieving License Information Please Wait...
[Thu Oct 11 15:18:34 2012]Local/ESSBASE0///2120/Info(1051286)
License information retrieved.
[Thu Oct 11 15:18:37 2012]Local/ESSBASE0///2120/Info(1051199)
Single Sign-On Initialization Succeeded !
[Thu Oct 11 15:18:37 2012]Local/ESSBASE0///2120/Info(1051232)
Using English_UnitedStates.Latin1@Binary as the Essbase Locale
Any ideas on what may be causing this?
Thanks in advance!
n

Hi Nelson,
Did you try increasing the Heap size for EAS ? Try the following and check if you still get the error -
increase the Java heap settings in the EAS script on a Unix platform that was configured using the automatic deployment method, do the following:
1. Navigate to the $HYPERION_HOME/deployments/{appserver}/bin directory.
2. Edit the setCustomParamseas.sh(.bat) script.
3. Modify or add the -Xms and -Xmx settings to the JAVA_OPTIONS variable. For example:
+JAVA_OPTIONS="-Xms256m -Xmx1024m -DComponentName=eas -DcomponentId=1e3bf92b2d9bb0493bcd3380127b0ca49ee7f50 -Dsun.net.inetaddr.ttl=0 -DHYPERION_HOME=/usr/local/oracle/hyperion -Dhyperion.home=/usr/local/oracle/hyperion -DEAS_HOME=/usr/local/oracle/hyperion/products/Essbase/eas -DESS_ES_HOME=/usr/local/oracle/hyperion/products/Essbase/eas/server -DEAS_LOG_LEVEL=5000 -DEAS_LOG_LOCATION=/usr/local/oracle/hyperion/logs/eas/easserver.log -DCLIENT_SERVER_DIFF_MC=true -Dweblogic.j2ee.application.tmpDir=/usr/local/oracle/hyperion/deployments/temp -Djava.io.tmpdir=/usr/local/oracle/hyperion/tmp ${JAVA_OPTIONS} "+
+*Note: For Tomcat deployments, the setting to modify is JAVA_OPTS:*+
+*JAVA_OPTS="-Xms256m -Xmx1024m*+
4. Stop and restart EAS for the setting to take effect.
Hope it helps....
KosuruS

Creating process for multiple Date fields for update or insert in APEX

hello there,
could someone please help me?
i have a form on Apex based on view that is based on three tables and updating and inserting ok using trigger instead of.
i have a problem now as in my form i have around 75 fileds (items) incuding 30 or more date fields which could be populated or left blank or update later.
so for each date field i have two boxs; one for date, input as dd/mm/yyyy (text field) and second for time, input as 23:45. All dates will be insert or update manually by user. so as i mentioned not all date fields could be poulated at one stage.
so i have created some process and validations and all of them work fine but i came accross if date left blank then (:) giving me problem so i have done following further process for each date field. In real table all the date fields have data type date.
declare
v_my_var date; -- for first date field
str_dy VARCHAR2(10);
dt_indx date;
str_tm VARCHAR2(20);
tm_indx date;
begin
str_dy := :p4_first_date
str_tm := str_dy||' '||substr(:p8_first_date_hh,1,2)||':'||substr(:p8_first_date_HH,4,2);
dt_indx := to_date(str_tm,'DD/MM/YYYY HH24:MI');
IF str_dy is not null then
v_my_var :=dt_indx;
ELSE
v_my_var := NULL;
END IF;
update table 1 set my_date = v_my_var where d_id= :p4_d_id;
end;
above code work fine but one date field of course therefore i have to do same code for each date field with changes and initialise variable again and again for each field.
so i like to ask is there any easy way that is more professional. i was thinking about the procedure and using collection or similar but honestly not much experience on that so could some one please help me?
I will be very thankful.
KRgds

Hi,
You can do the needful by re-using the code if you can give the item names as P8_DATE1, P8_DATE_hh1, P8_DATE2, P8_DATEhh2 etc..So your item name just differs by a sequence.
Now you write function which will return desired date value taking above items as input. Pass item names to this function, get session state using APEX_UTIL.GET_SESSION_STATE('item_name') API.
Now modify you code as
FOR i IN 1..30
LOOP
v_date_array[i] = f_get_date('P8_DATE'||i, 'P8_DATEhh'||i);
END LOOP;
....Now you have all date valus in array. Just write one update as follows
UPDATE TABLE1
SET date1 = my_date_array[1], date2 = my_date_array[2]..
WHERE ....Hope it helps :)
Cheers,
Hari

Return Process for Depot Excise Billing.

Hi,
We are following Depot Excise Billing Process. Where we are using Stock Transport Purchase Order Process for transferring the goods from Mfg.Plant to Depot.
Now, we require return process for returning the Goods from Depot to Mfg. Plant. Please also confirm Excise Register needs to be updated? If yes, please tell us the transaction for the same.
For satisfactory answer ful points will be rewarded.
Thanks and Regards,
Dilip Shende

Hi Murali,
I have followed the procedure given. However, in J1IEX transaction system gives me error message "Excise Invoice 9001000027 28.05.2008 of plant 410027 does not exist"
Where Excise Invoice 9001000027/28.05.2008 is the number generated in T.Code J1IJ. And 410027 is Vendor code.
Please give your valuable suggession to solve the issue.
Thanks and Regards
Dilip Shende

Capitalisation process for AUC

Similar Messages

Maybe you are looking for