Capitalization error for a WBS element

Hi Experts,
Our Customer is facing an issue while trying to settle WBS using CJ88. This has been occuring since quite sometime.
Issue is while trying to settle a WBS which has AUC link it displays an error message stating
"Asset Under Construction not completely credited."
What does this message mean and the suggest a solution for this..
Thanks,
Sasidhar

Hi Sasidhar,
For error 'KD574' please first of all see Note: 198931. In order to settle in different periods it is afforded to keep in mind
the functionality of settlement in CO:
- All costs up to the settlement period selected in CJ88 are summed up
- The selected costs are then settled to the receivers of the sender according to the settlement rule.
If You want to settle to different periods You may have to settle twice (first period N, afterwards period N+1).
In order to manage that the costs are selected correctly You may have to add a validity date to the settlement rule (field valid
from).
It may then occurr that error KD574 will pop up again. In this case please change it to a warning in transaction OBA5 and settle the order in the affected periods (CJ88 has to be run twice in the requested periods).
As long text of the error message says, the reason for the message can be because:
- There are no distribution rules with settlement type FUL
- The total percentage of the rules is greater than 100%
- Only amount rules were maintained
Note
When you settle an investment measure in full (FUL), the costs settled are those incurred on the asset under construction up until the settlement period but not yet settled to a completed asset or to another CO receiver.
When you partially capitalize an investment measure (settlement using processing type 3 if the measure has not yet reached the Technically completed status), single costs from the asset under construction can be settled to the completed asset. Alternatively, you can settle them to another CO receiver.
Furthermore, when you settle an investment measure in full or partially, origin data are transferred to the completed asset for data origin display.
Procedure
Maintain distribution rules or use partial settlement.
I hope this helps.
Best Regards,
Vanessa.

Similar Messages

Error in creating WBS element BAPI_BUS2054_CREATE_MULTI

Hi
I am calling BAPI_BUS2054_CREATE_MULTI for creating WBS elements for the blocked project . I am passing the detailed project definitiion with level ( like A5/01/01) . I am getting error that WBS element for the object could not be created error 076 that BAPI is not initialized .
Now to solve this I called BAPI_PS_INITIALIZATION first then am calling BAPI_BUS2054_CREATE_MULTI then its throwing dump and if I want to run thru se37 then still giving the same error mentioned above
Please let me know what should I need to do to remove the error .
Helpful answer will definetly ..
Thanks a lott in advance

Hi ,
I want to create a WBS element using the BAPI's BAPI_BUS2054_CREATE_MULTI .
I did this sequence of test :
BAPI_PS_INITIALIZATION
BAPI_BUS2054_CREATE_MULTI
And I have this return
S CNIF_PI 004 Individual check for creating the object WBS Element U008-F033-001 required
CAn you tell me what to do in order to resolve this problem ( calling a commit after this sequence leads to 'DUMP' bacause no precommit is called before )
can u send me a code Plz...
Thanks in advance

Vendor wise/Invoice wise consumption for each WBS element

Any standard report from SAP, which provide details of Vendor Purchase order / Contract, details of SES with WBS no. and details of Vendor invoice in columnar form.
SAP system can not generate standard reports giving vendor wise/Invoice wise consumption for each WBS element of particular asset.
Please help me to get this report.
Thanks in Advance.

Hi
Your starting point should be CJI3 report or any PS report... Here you get the FI Doc no
If this FI Doc No is generated from MM, check the Header segment of the document.. It would have MM Doc NO + Fisc Yr populated in the ref key... This gives you the link between FI & MM
From here on, you can take it forward... You can look up this doc no in MSEG Table and find the PO no... Then go to EKBE table for other PO details....
br, Ajay M

Reversing TECO status for Multiple WBS elements

Hi,
Question on setting and then reversing TECO status for a WBS element.
When a project is closed technically in project builder, all underlaying items (wbs, network/activity) are technically closed as well.
When you try to undo this, only the status of the top element is changed, not the underlaying items.
Is there any way in which we get the underlaying items changed as well (mass change is not an option)
Regards,
Jatinder Bansal

You can try two methods :-
1. Open project in project builder, Select project definition and then go to WBS Overview under project definition, now select all WBS Element and then undo TECO status. Now all the WBS status will be updated. But, this will not have any effect on network and its activities.
2. Open the project in planning board, now select all the objects, now undo the TECO status. This will change the status of all selected objects like WBS,Network and activites....

Tables for Budget allocated and spent for a WBS element

Dear experts,
I am new to PS domain, kindly tell me the table names where I can find the Budget allocated to a WBS element and Open budget for a WBS element.
Thanks & Regards,
Murthy.

Hi,
I think by conversion cost you mean Production cost of the turbine.
Since you do both the actvities Material procurement and production under the same WBS. The budget cannot be tracked separelty.
Have 2 different WBS strucute one for procurement and one for production. However you can add the existing Nwk activities to these WBS.
Regards,
Ramesh-

FM for standard WBS element change - CJ92

Hi all,
Is there any function module to make changes in standars WBS element/proj.def tocde- CJ92.
If any knows, please provide me the same.
Thanks much!
Chandra.
Edited by: Sekhar on Apr 7, 2010 1:10 PM

Thanks... Is this work for standard WBS elements ?

How to carry forward budget next year for single wbs element

Hi,
i want to carry forward budget next year for single wbs element.
pl suggest me.
Thanks & Regards
Purna.M

Hi,
Go to CJCO click on Dynamic Selection and in master data of WBS element select No of person responsible and give the person responsible and execute.before that maintain no of person responsible in that specific WBS element.
hope it will solve ur problem.
Regards
Avinash

Header WBS for two WBS elements

Dear All,
Is it is possible to create a Header WBS for two WBS elements which were
triggered by Two different line items in a sales document.Please detail the process
if a possibilty for the same exists.
Award points are assured for valuable replies.
thanking you
Best regards,
R.Srinivasan

Dear Sunil,
I am using the Standard project with same structures only.I am not able to get the header WBS for Two WBS elements triggered from the same sales order.what are other possibilities for this problem.
Can you please elobrate your reply
Thankingyou,
Best regards,
R.Srinivasan

How do we get complete hierarchy for a WBS element??

Hi All,
Is there any FM to get complete hierarchy for a WBS element??
Or any other method that would achieve this requirement ??
Eg:
C.00103.1
C.00103.1.1
C.00103.1.2.3
C.00103.2
C.00103.2.1 etc
If i give C.00103.1, all the WBS elements in the hierarchy should be displayed.
Any pointers are of great help.
Regards
Prathima

Hi,
Available Methods
Getinfo : Read detailed information about WBS [ BAPI_PROJECT_GETINFO ]
Maintain : BAPI: Project maintenance [ BAPI_PROJECT_MAINTAIN ]
SaveReplica : Replicate work breakdown structure (ALE) [ BAPI_PROJECT_SAVEREPLICA ]
The WBS hierarchy object type defines the hierarchy of the WBSelements. A project definition always has exactly one hierarchy. If theposition of a WBS element changes, the whole hierarchy has to berebuilt. Therefore, the WBS hierarchy object type has only one command:
Create. Every WBS element receives exactly one entry in the table parameter IWbsHierarchieTable with which it defines its position.
Command: Create
Use this command to create or change a WBS element hierarchy for aproject definition. Enter the WBS hierarchy object type and the Create
command in the table of the IMethodProject parameter. The commandrefers to all entries in the table of the IWbsHierarchieTable parameterthat contains the data for the data for the hierarchy. Each entry inthe IWbsHierarchieTable refers to a WBS element that describes its position relative to the other WBS elements.
Example
- Positioning WBS elements TRAINING , TRAINING.1 and TRAINING.2 . (WBS elements TRAINING.1 and TRAINING.2 are subordinate toWBS element TRAINING. WBS element TRAINING1 is positioned on the left of TRAINING.2.)
IMethodProject
OBJECTTYPE = WBS-Hierarchy
METHOD = Create
OBJECTKEY =
REFNUMBER =
OBJECTTYPE =
METHOD = Save
OBJECTKEY =
REFNUMBER = I
ProjectDefinition
PROJECT_DEFINITION = PD-TRAINING
IWbsHierarchieTable
WBS_ELEMENT = TRAINING
PROJECT_DEFINITION = PD-TRAINING
UP =
DOWN = TRAINING.1
LEFT =
RIGHT =
WBS_ELEMENT = TRAINING.1
PROJECT_DEFINITION = PD-TRAINING
UP = TRAINING
DOWN =
LEFT =
RIGHT = TRAINING.2
WBS_ELEMENT = TRAINING.2
PROJECT_DEFINITION = PD-TRAINING
UP = TRAINING
DOWN =
LEFT = TRAINING.1
RIGHT =
Notes
Further Information
For more information, see the R/3 Library under PS Project System -> Structures -> EPS Interface
Regards,
Vijetha.

How to find Annual Budget for a WBS element ?

Hi All ,
Is there any way by which i can find the annual budget for a WBS element ?
I have been working on this for a long time , but couldnt get the answer .
So getting back to this place .
Thanks in advance .
Regards,
Ambar .

Hi,
This link may help you.
how to get the budget amt and commited amt and available amt?
Regards,
Shamma

2 boms for same wbs element

hi all
is it possile to create 2 separate bom of same material for one wbs element ?
e.g.
i have material " M " and wbs element is " W "
so now i want to create 2 boms for this wbs .

Hi,
You can't create more than one WBSE BOM for a Unique conmination of WBS Element/Material/Plant/Usage.
Hope this clears you.
Regards,
Hari.

IDOC error u201CPlease enter WBS element for This Cost centeru201D

Hello SAP gurus,
While doing PGI through IDOC u2013 basic type u2013 DELVRY03. I am getting error message u201CPlease enter WBS element for This Cost centeru201D
Can some one please help me where I can check the settings?
Thanks
Sha

Hello Arakish,
That link is good one but not helpful for my issue and I have checked this forum then I posted my doubt. Still my issue is not resolved. Can someone please help me on this, I think only for this cost center I am getting this error.
Thanks again.
Sha

Error while Creating WBS element using BAPI 'BAPI_BUS2054_CREATE_MULTI'

Hi Expert,
I've a requirement to create WBS elements using BAPI. And I am using BAPIs in the following manner.
CALL FUNCTION 'BAPI_PS_INITIALIZATION'
CALL FUNCTION 'BAPI_BUS2054_CREATE_MULTI'
    EXPORTING
      i_project_definition = g_pdwbs
TABLES
    it_wbs_element             = it_wbs_element
   et_return                  = it_return
EXTENSIONIN                =
EXTENSIONOUT               =
    CALL FUNCTION 'BAPI_PS_PRECOMMIT'
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
When I do so I am getting the below errors. Please suggest.
"Individual check for creating the object WBS Element C-497082 required ".
"Individual check for creating the object WBS Element C-497082-0001 required".
Please suggest how to correct this error.
<REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
Edited by: Alvaro Tejada Galindo on Aug 18, 2008 5:25 PM

I am getting the same error, but I cannot figure it out how to detect it and fix it. Will you please share your solution?
Thanks,

Error while creating WBS element.. regarding source structure

I am creating a project and then a WBS element. Its a investment project. While creating WBS element XXX, it gives me error that "WBS element XXX: SOurce assignments for source structure A1 missing in Investment Profile ZZZZZ."
What shall I check? what could be the reason?
Thanks,
A

hi,
In this IMG activity, you define the source structures used when settling and costing joint products.
A source structure contains several source assignments, each of which contains the individual cost elements or cost element intervals to be settled using the same distribution rules
Just consult with your CO Consultant...
Venkatesh

Settlement to cost center posted for statistical WBS element

We have the following scenario
Statistical WBS elements with assigned Cost center posted for actual postings
Network assigned to statistical WBSE and settlement rule on the same WBSE
On settlement run CJ88 the network costs are transferred from network to Cost Center posted in the WBSE.
Issue:
While analysing the active availability control the assigned value is doubled. This happens only of the networks are settled. System considers the Actual values from network + Statistical value from WBSE to caculate the assigned values.
Simulation details as under.
SP-SET-02-3 (wbs element)
    COSS 2011 11 0007101000     0001240704 KOAO D INR                 100.00 INR
    NWA 500000002408 0010
        COSS 2011 04 0007101000     0001240704 KOAO O INR                 100.00- INR   S -- does not contribute to assigned value
        COSP 2011 04 0007101000     0001240704 COIN D INR                 100.00 INR
        COSP 2011 01 0007101000     0001240704 KPPP D INR                 100.00 INR   M   -- does not contribute to assigned value
Hence the assigned value gets doubled and eating up the budget.
Anyone encountered similar issues pls share the possible solutions.

Hi Mohit
It is against SCN's rules to post the same discussion thread twice. You have already posted a similar question in the below thread. Please refrain from doing this and close one of the threads.
Initial balance upload of revenue GL accounts with wbs
Regards
Sowmya

Capitalization error for a WBS element

Similar Messages

Maybe you are looking for