Capping changes in vm.cfg are not persistent

A customer tried to cap a VM
But when they do other changes in the GUI the vm.cfg file is overwritten so the capping info is gone
Is this a bug or a feature?

Hi,
I meant that both the added columns of Windows Server 2008 R2 and Windows Serve r2012 RC are persistent.
You may install a new Windows Serve r2012 RC to check the symptom.
Currently, you may perform a System File Checker (SFC /Scannow) to check the result.
Regards,
Arthur Li
TechNet Community Support
Arthur, I have the exact same problem as David Trounce.  The problem exists, as he described it, and I don't think you are understanding it.  Please pass this problem/bug/defect report to someone else so that it can be logged and fixed before
RTM.  Thanks! -Kent

Similar Messages

  • Changes made in BOM are not reflected in Configurator.

    Hi all,
    When i update minimum and maximum quantities in BOM, the new values are not reflected in the configurator.
    I have found a patch (patch# 4410573) for this issue in metalink and applying that patch did not resolve the issue.
    I have logged an SR with Oracle for this and Oracle support have asked me to run "Refresh Single Configuration Model" concurrent program and see if the changes are reflected.
    This program has 2 parameters one for folder and the other for Configuration Model Id.
    When i try to run the program, for any of the folders, the value set for the parameter Configuration Model Id does not show any values and hence i am unable to run the program.
    We don't have a separate instance for COnfigurator.
    Do i need to do any set up so that my Configuration model is reflected in the LOV?
    Can anyone please help me on this?
    Oracle Apps version: 11.5.10.2
    Configuration software build: 11.5.10.25.43A
    Regards,
    Sreekanth

    Hi Jason,
    Please see my comments below
    Jason said*
    Support is correct. If you haven't run the Refresh a Single Configuration Model concurrent program for your model, then the new BOM attributes will not be visible in your model. Changes to items/BOMs are not directly reflected in the configuration model. You must "refresh" the model to see the changes.*
    Even without running the "Refresh a Single Configuration Model" concurrent program, in some scenarios, changes are being reflected in Configurator.
    Ex:
    When i change only minimum and maximum quantities, the changes i.e. new minimum and maximum values are not reflected in Configurator.
    But, when i also change any of the following fields along with minimum and maximum quantities, new values are being updated in Configurator with out running the refresh program.
    effectivity_date, disable_date, component_quantity, planning_factor, component_yield_factor and optional class
    Can you please explain this?
    Also, i have already tried executing the query by commenting the enclosing_folder check. But still, the query is not retrieving any records.
    Basically, the sub-query that fetches devl_project_id itself is not retrieving any records.
    Jason said:+
    Based on the SQL above, the only criteria for importing a model is that the item under the folder must be:+
    a. A Model (PRJ = Project)+
    b. The Model cannot be deleted (Deleted_flag must be '0')+
    c. And the model must have been imported from Oracle apps, e.g. it cannot be a non-BOM model (orig_sys_ref is not null)+
    Can you please tell how can i check whether model is imported into configurator or not and if it is imported from where is it imported?
    Regards,
    Sreekanth
    Edited by: Sreekanth Munagala on May 12, 2011 8:52 AM

  • Changes to Excel files are not getting updated

    File updates not reflected. I modified content, added data validation and saved the file back - next day file is still the way it was before modification.
    Other file, another site but similar situation.
    Content changed - form added but next day the change is not reflected. File updates not reflected. I modified content, added data validation and saved the file back - next day file is still the way it was before modification.
    Other file, another site but similar situation.
    Content changed - form added but next day the change is not reflected.

    Hi,
    According to your post, my understanding is that changes to Excel files are not getting updated.
    I recommend to configure Excel Services data refresh by using Secure Store and an external Office Data Connection (ODC) file.
    For more information, you can refe to:
    Configure Excel Services data refresh by using external data connections in SharePoint Server 2013
    If you use PowerPivot, you can refer to:
    Refreshing PowerPivot Data in SharePoint 2013
    If you use Office Web Apps, you can use New-SPWOPISuppressionSetting -extension xlsx -action view to refresh data.
    You can refer to:
    PowerPivot for SharePoint - Browser Refresh Fails (Data Refresh not supported in Office Web Apps)
    In addition, here is a similar thread for your reference:
    http://social.technet.microsoft.com/Forums/office/en-US/2c4009f3-62bc-4af0-9e16-e40e9d418e3b/user-changes-to-sharepoint-documents-lost
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • Changes in backing bean are not considered for deployment

    hi,
    i'm not sure whether this is a jsf specific issue but..anyway, here's the case: I'm using eclipse ( lomboz) as ide and whenever i change something in my backing bean (let's say add a new method) it is not found after redeployment neither after clean command. after some startups the changes eventually are adopted. this is really annoying as just starting the server takes me half a minute. so if anybody ever had the same or similar problem or has any experience with hot deployment please sent me a clue.
    regards,
    jens

    >
    Elena Ainoulina wrote:
    > Anyone had this issue in CHARM before ?
    >
    > we have SLFN - SDCR - SDMJ open for a change.
    > Development complete and almost tested - transport of copies is in QA, but original transport is not released from DEV.
    > Business now wants to stop this change and close SLFN.
    >
    > How can I close/cancel SDMJ ?
    > When I try to cancel it, I get the message "Changes in development system are not excluded" and status is not changed.
    > Is there a way to force close SDMJ ?
    >
    > Thank you
    > Elena
    Elena, the system is giving you this message as a (cryptic) reminder that even though you want to close the SDMJ, you have made changes in DEV and QA that need to be reversed with another transport.  Depending on your audit requirements, you may want to add these reversing entries on the same transport as a new task, or on an additional transport and send the whole thing through the normal processing.  The other alternative is to execute CRM_SOCM_SERVICE_REPORT - just make sure you have reversed the changes already made to maintain the integrity of your landscape.

  • Changes in development system are not excluded

    Anyone had this issue in CHARM before ?
    we have SLFN - SDCR - SDMJ open for a change.
    Development complete and almost tested - transport of copies is in QA, but original transport is not released from DEV.
    Business now wants to stop this change and close SLFN.
    How can I close/cancel SDMJ ?
    When I try to cancel it, I get the message "Changes in development system are not excluded" and status is not changed.
    Is there a way to force close SDMJ ?
    Thank you
    Elena

    >
    Elena Ainoulina wrote:
    > Anyone had this issue in CHARM before ?
    >
    > we have SLFN - SDCR - SDMJ open for a change.
    > Development complete and almost tested - transport of copies is in QA, but original transport is not released from DEV.
    > Business now wants to stop this change and close SLFN.
    >
    > How can I close/cancel SDMJ ?
    > When I try to cancel it, I get the message "Changes in development system are not excluded" and status is not changed.
    > Is there a way to force close SDMJ ?
    >
    > Thank you
    > Elena
    Elena, the system is giving you this message as a (cryptic) reminder that even though you want to close the SDMJ, you have made changes in DEV and QA that need to be reversed with another transport.  Depending on your audit requirements, you may want to add these reversing entries on the same transport as a new task, or on an additional transport and send the whole thing through the normal processing.  The other alternative is to execute CRM_SOCM_SERVICE_REPORT - just make sure you have reversed the changes already made to maintain the integrity of your landscape.

  • Changes to my bookmarks are not saved when firefox is restarted. I already tried deleting places.sqlite, but it is still doing this.

    Since I downloaded Firefox 4, I have not been able to save changes to my bookmarks (this includes both adding new bookmarks or deleting old bookmarks). When I make a change, the changes are not saved the next time I restart Firefox. After doing a Google search I found a Mozilla help page that suggested deleting the place.sqlite file. After doing this, Firefox will save changes for a few days, but then go back to not saving the changes. I've done this twice already.

    Sounds that you have cleanup or other security software that cause corruption of the file places.sqlite
    You need to check the settings of your software and make sure that you exclude the Firefox Profile Folder to avoid such problems.
    * http://kb.mozillazine.org/Profile_folder_-_Firefox

  • Changes made in Lightroom are not displayed in Bridge.

    When I make changes to my jpeg or psd files in Lightroom 4.3, these changes are not displayed in Bridge.
    I'v checked the appropriate box in Lightroom's Catalog Settings "Auotmatically write changes to XMP".
    What am I doing that's incorrect?
    Digitalmac.

    With the box <Auotmatically write changes to XMP> checked, it may take a while until Lr "gets around" to writing the changes to xmp.
    To check directly do this: immediately after you made changes to an image (PSD or other) press Ctrl / Cmd + S (letter S on you  keyboard), wait until the progress bar has finished and then check your image in in Bridge.

  • Modified changes to ESS DC are not visible

    Hello Experts,
    I have imported the DC and checked out. I have modified essusfam~sap.com by adding a text field and input label. Saved all my changes and tried to deploy the code from the context menu in webdynpro explorer. NWDS prompts for SDM pasword and later I see the deployment sucessfull. But, the changes are not visible. Just want to know if I am missing any steps before deployment. or do I need to follow any more steps.
    I am trying not to use NWDI deployment process
    Thanks,
    Sharath.

    Hi Sharath,
    When building, choose project then right click and select build... from Development Component section.
    Regards,
    Raj

  • Changes in Crystal reports are not reflecting after publishing

    Dear SDN Mates,
    We are facing problem with Crystal reports. After making the changes in the crystal reports, it is not reflecting in the portal after publishing. Still it is showing the older version of the report.
    Can anyone please help me on this.
    Thanks and Regards
    Arun S

    Hello Prathamesh,
    After publishing the report, we require some changes in the report and doing some modifications in crystal report and again we are publishing this report. After publishing the report for second time, those changes are not reflecting in the BOE portal.
    This is happening for all reports. Can you please suggest me on this.
    Thanks and regards
    Arun S

  • PP & AE Dynamic link - changes made in AE are not showing up in PP

    Hello,
    I am doing the following:
    1. In Premiere Pro (CC 2014) I select a clip on the timeline --> right-click --> Replace with After Effects composition.
    2. In AE, I am doing some animation of text.
    3. Usually, any changes done in AE, are automatically shown in Premiere + the red line appears which means I have to render the clip.
    4. Once in a while and not vert often, for certain clips, it randomly stops working:
    I am making a change in AE, but the change is not seen in Premiere and the line above the clip doesn't change to red.
    Any idea what might be causing this and how to fix it ?
    Thanks,
    Tal

    Thanks for you responses WC. The changes I made to iPhoto did eventually show up, but it took over an hour. This is really the only 'issue' I've had with my ATV2, but it was extremely frustrating. I tried rebooting the ATV, my computer, and a number of other things, but nothing worked. Eventually I walked away from it, and when I came back everything had updated.

  • Userexit in VA41. Changes to field aufnr are not saved

    Hello,
    I have to fill the field xvbap-aufnr with the field vbeln during saving a order (contract) in VA41.
    I tried to use "userexit_save_document" and "userexit_save_document_prepare".
    The problem is that in userexit "userexit_save_document_prepare" the field vbeln is not field because we use an internal num range.
    In userexit "userexit_save_document" the vbeln is filled but I am not able to change the entry of xvbap-aufnr. I can change the field value but my changes are not written to the data base. Why ????
    Thanks

    If the number range for VBELN is internal, you cannot change it through user exit.  Changes made to structure fields in USEREXIT_SAVE_DOCUMENT will not have any effect.

  • Changes in custom.css are not displayed on iPad

    Dear all,
    I'm using a custom.css file in my Analysis Application.
    Changes in this CSS-file are immediately shown in my design in Design Studio and when executed on the BI Platform.
    However, these changes are not displayed when I run the application in SAP BusinessObjects Mobile on iPad.
    Thanks for sharing your ideas,
    Hans

    Hi Hans,
    If you make changes to your custom css file and reupload the file to your BIP and then open the report, does it help if your clear your browser's cache and reload the report again, do you see the css changes then?
    So instead of restarting the APS just clear the Browser Cache. The changes will be seen only in the browser and for the user who has cleared his browser cache.
    If you want to disable css caching there are different options available in general but with Design Studio only some of them can be implemented: you could configure your web server (for example Apache) to force refresh of cached data for example by setting some header parameters/values or with some other method.
    (just take into notice the performance implications of such a setting: the best option would be to force the reloading of the css file only when it changes and only for files that are changed, not for all css files all the time)
    There is a lot of information about overcoming caching techniques alone when you do a search on the stackoverflow site, for example this one has some good techniques:
    What is an elegant way to force browsers to reload cached CSS/JS files?
    Regards,
    David

  • Changes to the infoobject are not reflecting in the query Desinger level.

    Hi All,
    We removed some Attributes to one characteristic and transported into QA.
    The removed attributes are not getting in BEx query designer in Dev, But we are getting those removed attributes in the context menu of that particular Char in BEx Designer in QA.
    We checked in the Characteristic level, those removed Attributes are not there in Info object level but still those Attributes are displaying in BEx designer level in QA.
    And info object showing as gray color even though we activated the info object, We think this may be the cause to not reflect the changes to BEx Designer level.
    Can any one suggest us to resolve the issue.
    Thanks & Regards,
    Raju. E

    Hi Raju
    Go to transation RSRT enter one of the reports and click to Generate Report. If this solves your problem then you can go to Environment\generate queries directly to regenerate the impacted queries.
    Cheers
    Tansu

  • Screen changes made through JavaScript are not rendered

    Hello,
    What I have done first:
    1) Download <a href="http://www.adobe.com/devnet/livecycle/articles/AddingRemovingTableRows.pdf">http://www.adobe.com/devnet/livecycle/articles/AddingRemovingTableRows.pdf</a>
    2) Open it with Adobe Designer
    3) Save as xdp file
    4) Create simple WD component
    5) Insert InteraciveForm UI element and bound all reqiuired properties
    6) Move AddingRemovingTableRows.pdf to src\configuration\Components\<name of WD component>\ and rename to be the same like in UI elelemnts property "templateSource".
    7) Run application
    Now, the problem: <b>rows are not added</b>! I got the message about max limit BUT screen itself is not changed.
    I placed FileDownload UI elelement and bind it to the same context attribute as pdfSource and tried to download generated PDF. Then I opened it with Adobe Designer and saved as xdp file.
    The diference between initial and generated includes among others:
    Initial:
    <acrobat>
    <acrobat7>
      <dynamicRender>required</dynamicRender>
    </acrobat7>
    </acrobat>
    Generated:
    <acrobat>
    <acrobat7>
      <dynamicRender>forbidden</dynamicRender>
    </acrobat7>
    </acrobat>
    Could some one give me idea how make script (which adds rows to table) running?
    Thank you!
    Best regards, Maksim Rashchynski.

    Hello Maksim,
    You have to render a 'dynamic PDF' on the server. This can be achieved by using the <a href="https://media.sdn.sap.com/javadocs/NW04s/SPS7/wd/com/sap/tc/webdynpro/clientserver/adobe/pdfdocument/api/IWDPDFDocumentInteractiveFormContext.html#setDynamic(boolean)">setDynamic</a> method of the IWDPDFDocumentInteractiveFormContext interface.
    Regards,
    Philipp

  • Changes made in jsp are not reflected

    webpages are not reflected after modifying jsp pages
    what i need to do??
    thanks in advance

    Hi
    Thanks for your reply,
    I am using CQ 5.5 and was installed service pack 2.
    1. We make package from SVN or through maven build to the CQ dev server.
    2. JSP changes perfect but /var/classes java files contains old code(i.e new JSP file complitation is not happening )
    3. Only when we restart server, /var/classes reflecting with new code other /var/classes have old code only.
    What is best procedure to re-compile JSP with out Restart server.

Maybe you are looking for