Caps light does not work

I'm using an HP Pavilion dv6000 Notebook series.
I noticed that my Caps Lock LED is not working but its FUNCTION is working fine.. same goes with Scroll Lock. Here's the weird part.. when I press Num Lock ( function key + scroll lock ) the LED turns on!
I already tried a system recovery, it didn't solve the issue. Is there something wrong with my BIOS?
Any help from you guys will be highly appreciated.. thanks!

Hi all,
You can verify your warranty status here:
http://www13.itrc.hp.com/service/ewarranty/warrantyResults.do?admit=109447627+1286541891570+28353475
If your laptop is under warranty, have an HP Authorized Service Center fix it for you.  If not, read on..
Get the schematics for your laptop by searching for your specific model laptop and downloading the Service Manual PDF.  That will have screw listings, pictures, removal process, etc.  Grab a Phillips#1 and Torx#8 screwdriver and a magnet to hold the screws you remove.
Per schematics, remove the keyboard, and then take a look at the keyboard bezel (the plastic piece above the keyboard with all the lights).  Look for ribbon cables coming out from under the bezel going in to a ZIF connector.  Remove the ribbon cables from the ZIF, verify that the metal on the cable looks good, and re-seat it back in the ZIF and make sure it is flush and evenly in there.  Put the laptop back together and verify it now works right, if not you could try again, order a replacement part, or say screw it all together.  Hope this helps.
________________________________________________________________________________________________________ I Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly

Similar Messages

  • Caps Lock Does Not Work

    The caps lock key on my  4 yr old MacBook Pro (OS X 10.6.8) does not work. It did at one time. The Keyboard was replaced a long time ago but that did not solve it.
    If I log out and then back on as another user, it does work.
    Where do I start to look for the cause.
    Alexander

    Check in your keyboard settings on both accounts in System Preferences > Language and Text, and you may find a difference between the two regarding the behavior of the caps-lock key.
    Or your caps-lock may be a little capricious, too...

  • What's wrong with the built-in keyboard on my macbook? The caps button does not work rite, no matter what letter button i push they all come out capitals and the number keys when pushed display the special characters instead of the numbers!

    the built-in keyboard on my macbook is not functioning right, the number keys when pushed display the special characters instead of the numbers,
    the caps button doesn't work at all, the letter buttons display capitals when pushed whether the caps button is on or off, the shift keys are also out of whack!!
    It seems it somehow got relocated to the "0" button because if you push and hold the zero button down the keyboard seems to operate normally, the number keys display numbers when pushed the letter keys display lower case when pushed but release the zero button and your back in the twilight zone!! Can anybody help me resolve this issue? one more thing im using an external usb keyboard right now and it seems to function properly if that helps any.

    You would do better in the actual macbook pro forums (this is not).

  • Macbook PRo will not boot, MagSafe adaptor light does not work !

    Okay... so i have this issue with my MBP where it will not power up.
    The light on the magsafe does not show up at all when connected to the MBP. I have tried another magsafe but failed. I have not tried another battery so im not sure if that is wheret the fault lies.
    Ive tried the SMC reset holding the power button down for long, but still no result. However, i left the MBP disconnected from the magsafe and went out for the whole day. Came back, connected the magsafe and thought id try again. I held the power button for 10 seconds and the MBP started booting. It wasnt the normal boot im not sure if it was performing some sort of safe boot, but it was doing something, the screen turned transparent white, restarted and i could finally log in. The battery was very low so i left it on charge with magsafe.
    One thing i have noticed is that sometimes i wont get the light showing on the magsafe but it may still be charging at that point.
    This morning i wake up and its the same issue all over again. It must have stopped charging or something as i left the MBP on with magsafe connected. Now it will not turn on no matter what i do.
    If i tilt the magsafe connector at an angle i can see a dim green light but then id have to hold it in that place to see that light.
    Please advise on what i should do next. Excuse the long story !

    Hi s.cheslik,
    It seems your MacBook Pro will not boot properly and it displaying an error message. Based on the information you have provided, it appears your MacBook Pro needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
    Apple - Support - Service Answer Center
    Thank you for contributing to Apple Support Communities.
    Take care,
    Bobby_D

  • My flash no longer works, the flash light does not work it is an iphone 5 about 15 months old

    My iphone 5 is a little over a year old, seems like after the update to IO7 the flash quit working as did the flashlight that comes with IO7. i have done the soft start, hard start, Reset and now the complete restore. any ideas?
    Thank You

    The iPhone 5 was first made available for sale on 21 September 2012. It is not physically possible for it to be 15 months old.

  • My phone lights does not work, everything is dark

    my phone fell into some water for half a milli second, now the phone works completely. However its dark, lights are very dim.

    This is due to the backlight of the LCD being out. This can be a LCD problem, which is fixed with a new LCD. Or this can be due to logic board damage, to the backlight controller chips, there are two of them I believe, usually one of them goes out.

  • Segoe UI Light font not working

    Segoe UI Light does not work in Firefox 8 when using it in CSS.

    Use this CSS:
    font-family: "Segoe UI";
    font-weight: lighter;

  • Caps lock key does not work...

    my caps lock key was working perfectly up until 10-15 minutes ago.
    when i press my caps lock key, the little light on the key does not turn on and all of my letters remain in lowercase.
    i thought perhaps something was stuck underneath the key, but when i took the key off - nothing was there. i placed it back on and still the caps lock key does not work.
    does anyone have any ideas as to why the problem could be and how to fix it?

    Finally found something that worked for me. See this thread and look for the post about removing the Hitoolbox plist files.
    http://discussions.apple.com/thread.jspa?messageID=10765093&#10765093
    I removed all of them. (Had multiples) Also make sure you empty the trash afterwards.
    Then restart.
    Then I used the modifier key trick in this thread. Turned off the caps lock key. Then restart.
    Then use the modifier key trick and turn the caps lock key back on. Test to see if your lights come back on for the caps lock key.
    If so, next time you restart it should still work. Finally. This thing has been dogging me for a long time.

  • HT1192 caps lock function does not work after latest update

    Hi there,
    I have a Macbook 13" Early 2011 and recently after updating my operating system to Mac OS X 10.7.4, i have found that the caps lock button isn't functioning.
    At present if i hold or press the button, it is failing to light up or function at all.
    Is there a fix for this issue, as i have read that there was an update by Apple to stop accidental pressing of this key, however not being able to access its function at all seems to be unusual.
    Your thoughts and opinions would be much appreciated,
    Thanks,
    Robsterhill101

    My Macbook Pro Early 2011 15"  (base model) did this to me last night.
    I did a PRAM Reset, the generic "Cure All Procedure" for Macs. It worked after, but I noticed that the button had to be pressed at just the right angle and with enough pressure. The light would come on and off and Caps Lock functions properly. Continued as normal.
    I put the computer to sleep by simply closing the lid, and then put myself to sleep as well.
    This morning, just before I came on here, my computer would NOT wake from sleep (a whole other issue). Would not wake up by pressing the power button. So I had to do a hard reset, hold the power button down, and press it again after...grrr I never feel good being forced to do this.
    Anyways long story a little bit shorter, I restarted my computer and low-and-behold the Cap Lock is not working again. No Bueno, Cupertino.
    No, sorry, no liquid damage on the keys, and I don't have kids, nor share my computer with anyone but myself.
    Its one of the few things that bug me about this computer. The other is the issue of the computer not being able to wake from sleep. Too often.
    SHOULDA BOUGHT THE APPLE CARE
    Simply Because, perfect timing after the years original warranty, you will experience problems. After all, they do want you to be a repeat customer. IYKWIM

  • Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work.

    Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work neither when chosen after pressing the button nor chosen in the apple menu..

    I have had the same problem but on another forum it was suggested that disabling internet sharing would solve this. This fix seems to work on my machine - why it works I do not understand

  • Apple TV does not work after trying to update software. Main light keeps blinking and on the screen shows itunes icon and a usb cable. What does that means?

    My Apple TV does not work after trying to install the new software update. The main light keeps blinking rapidly and on the screen it shows the itunes icon and a USB cable. What does that mean?

    The Apple TV is in recovery mode. Try to restore the Apple TV. Follow the link for instructions on the restore process.
    http://support.apple.com/kb/HT4367

  • Have just down loaded Yosemite over Mountain Lion, Indesign CS5 does not work ( Am dependant on it) although Bridge , Light Room and Elements operate OK How do I solve this rapidly. Can any one help on this issue. Thanks

    Have just down loaded Yosemite over Mountain Lion, Indesign CS5 does not work ( Am dependant on it) although Bridge , Light Room and Elements operate OK How do I solve this rapidly. Can any one help on this issue. Thanks

    Sorry to say it, but I think you can see from Bob's response that there's no way to solve this rapidly.
    Did you take an image of your Mountain Lion install before upgrading to Yosemite? Roll back to that. If you're not in the habit of taking a snapshot of your system before performing operating system upgrades - get in that habit. If you are dependent on anything at all on hour computer, having a reliable backup method in place is essential. If you don't have a Time Capsule, or some other way to run Time Machine onto a disk that's not in your computer, go set that up yesterday.
    If you can't just remove Yosemite and roll back to Mountain Lion for whatever reason, you can partition your drive so that you can install both Yosemite and Mountain Lion on the same drive, and then boot into Mountain Lion when you need to work in CS5. Or you can take your Mountain Lion disc (I assume you have one, no?) and then use it to create a virtual machine in something like VirtualBox to run Mountain Lion from inside Yosemite.

  • Wireless keyboard light on caps button does not come on

    wireless keyboard light on caps button does not come on

    Hello:
    That is some sort of anomaly that I have also noticed.  On the rare occasions when that happens, a restart corrects the issue.
    Barry

  • My iphone 6plus not working not charge but when i run it the first time working half an hour  when you attempt to run it again light up thr screen and showws the apple logo and after the pice screen illuminates red and does not work what do i do now

    My iphone 6plus not working not charge but when i run it the first time working half an hour  when you attempt to run it again light up thr screen and showws the apple logo and after the pice screen illuminates red and does not work what do i do now

    Hello Nadersalah,
    It seems you're experiencing multiple issue with your iPhone. Based on the information you have provided, it appears your iPhone needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
    iPhone Repair and Service - Apple Support
    Thank you for contributing to Apple Support Communities.
    Cheers,
    Bobby_D

  • Hp TrueVision HD web cam does not work. The light will come on but no image appears in the window.

    Hi.
     I have an HP Pavilion dv7 6178us Entertainment PC I just bought it last week. My operating system is Windows 7 Home Premium Service Pack 1 64 bits.
    The problem I have is that yesterday I install Skype in the computer and realized that the HP TrueVision HD web cam does not work. The light right next to the web cam will light up but no image will appear on the screen.
    I have checked the software that  I have in the computer for the webcam and the program is CyberLink YouCam BE version 3.5.
    But the web cam does not work. The light right next to it will turn on when I activate Cyberlink, Skype or Messenger but no actual image will come out in computer screen. The computer is fully updated BIOS, Windows 7 and HP.
    But the web cam is not working. Could you help me fix this problem?
    Best regards:
    JEIO71

    I have a pavilion dv6 notepad. it's about a year old.
    about a month ago internal webcam truevision hd stop working.
    Called hp tech. they sent a box for me to ship the laptop.
    they hp tech attempted to correct the problem via internet
    did not work.
    wanted me to do a restore to factory setting i stopped him there.
    Webcam detected in device manager.
    the webcam light come on but no image.
    I actually see the back drop through the image space.
    running windows 7, fully updated.
    I found many comments on the web about the webcam connector disconnecting.
    But if it was the case with my computer, the webcam would not be detected.
    Many other comments suggests to do a restore to factory setting but \i read also that
    does not work often.
    I read many comments where disappointed clients believe hp should update
    the software but the driver is actually microsoft dating back to june 2006.
    Is it possible it's  a hardware problem, ie webcam is burned out.
    I have received a box to sent it and know they will do a system restore.
    Don't feel to go that way.
    Many comments refers to hp making an effort to get a driver update.
    ps I decided to purchase a logitech webcam, works perfectly.
    What else can I do to fix this problem.
    Can hp send me another internal webcam.

Maybe you are looking for