Caps lock on screen display after sleep or hibernatio​n?

Hello, I just got a lenovo carbon x1 and when the computer comes out of hibernation or sleep a symbol that says the caps lock is off appears on the screen for a few seconds. How do I stop it from telling me the caps lock is off after waking it up from sleep or hibernation? thanks

for example, under the chipset section there is a driver for the intel manegement engine that says:10.0.38.1036
in my device manager it says intel management engine driver is: 10.0.30.1054
my thinkvantage doesnt list this chipset as something that needs to be updated. why is it not telling me there are newer drivers to install?
Chipset
Intel Chipset Driver for Windows 8.1 (64-bit) - ThinkPad Helix (Types: 20CG, 20CH), T550,W550s, X1 C...
Windows 8.1 (64-bit)
Intel Chipset Driver
10.0.22
11/4/2014
README for Intel Chipset Driver
10.0.22
11/4/2014
Chipset
Intel Management Engine 10.0 Software for Windows 8.1 (64-bit) - ThinkPad
Windows 8.1 (64-bit)
Intel Management Engine 10.0 Software
10.0.38.1036
3/20/2015
README for Intel Management Engine 10.0 Software
10.0.38.1036
3/20/2015
Chipset
Intel Management Engine Firmware 10.0 for Windows 8.1 (64-bit) - ThinkPad
Windows 8.1 (64-bit)
Intel Management Engine Firmware 10.0
10.0.38.1000
3/20/2015
README for Intel Management Engine Firmware 10.0
10.0.38.1000
3/20/2015

Similar Messages

  • S205 caps lock on screen display

    The on screen display CAPS LOCK icon (C:\Program Files\CapsLK OSD\capsosd.   version 1.0.1.0)
    How do I stop the icon display permanently whilst caps lock is on?
    I have solved the problem on my Thinkpad (desktop right click/resolution/advanced/on screen display), but not on the S205 ideapad
    Solved!
    Go to Solution.

    Hello imp1971 and welcome to community,
    Kindly uninstall CapsLock App software from program and features.
    If you want it back then you can download from here
    Best Regards,
    Tanuj
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Avoid the Caps Lock On Screen indicator

    Hi,
    I have x240 lenvovo laptop with windows 8. Is there a way to 
    aAvoid the Caps Lock On Screen indicator from appearing when pressing the caps lock ?
    regards,
    Kevin
    Solved!
    Go to Solution.

    1.  Right-click on desktop -> Screen Resolution
    2.  click on Advanced Settings
    3.  click on On Screen Display tab
    this is where you can change the settings about on screen indicators like capslock

  • MBA not always recognizes external display after sleep

    Hi,
    I have a 2011 MBA and use it on a external display (Dell 2709w) with the lid open. The issue with this MBA is that after sleep it often (every second time I wake it up) doesn't show anything on my external monitor. In order that the external monitor works again I have to plug the DVI cord out and in or press recognize monitors under monitor settings.
    I also did a PMC and SMC reset but both did not help.
    I have also done a complete reinstall witch did not help as well.
    I also did a test with a MBA from a friend (exact same model) and his always works with the external display after sleep while mine only works every second time.
    Could this be a hardware defect? sound pretty strange to me, but who knows...

    I have managed to make the Apple Hardware test by just pressing "D" while restarting. The test, however, did not find any error - but this does not surprise me as I think it only tests the ram.

  • Email address hacked via iphone. iphone locked home screen displaying my email password! and has been reset. now unable to restore iphone, saying i do not have permission

    Email address hacked via iphone. iphone locked home screen displaying my email password! and has been reset. now unable to restore iphone, saying i do not have permission

    If you don't know your password, don't know your security questions and don't have a rescue address or don't receive a reset email, you should contact AppleCare who will initially try to assist you with a reset email or if unsuccessful will pass you to the security team to reset your security questions for you.
    If you are in a region that doesn't have international telephone support try contacting Apple through iTunes Store Support.

  • T440s: No on screen display of caps lock, volume, screen brightness, etc.

    Hello all-
    I updated the BIOS to 2.26 a while ago and ever since then there's no on-screen indication of caps lock on/off, screen brightness or volume when I change it. Since it seemed to be affected by BIOS, I updated again to 2.27 just now, but the problem persists. Any ideas? Thanks in advance for the help.
    EDIT: Just fixed my own problem. I needed to update the Hotkeys Feature Integration by downloading the utility thingy from this page. Probably wasn't a BIOS thing after all.
    Solved!
    Go to Solution.

    Hi Brightnsalty,
    Welcome to Lenovo Community!
    As per your query we understood that you were facing issue with On Screen Display earlier on ThinkPad T440s.
    And we glad to hear that the issue has been resolved after installing Hot key feature application.
    I also suggest you to update Lenovo power management application, if the OS is Windows 7, please update Lenovo Power Manager application.
    Cheers! 
    Hemanth Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • No display after sleep with macmini using DVI - S-video/composite under XP

    Hi guys, I have installed XP on my mini. I have CRT TV so I'm using
    DVI -> S-video/composite to output to my TV.
    The problem is after sleep - there is no display (it's woking only after reset).
    I installed the latest drivers from the mac os 10.5 DVD & updated the graphics driver from Intel.
    Please help

    Unfortunately, no answer, as I'm having the similar problem with a Samsung SyncMaster 215tw and a G4 Mini. It works with the DVI-VGA adapter and the VGA cable into the montor's VGA port. However, connecting with the G$ Mini's DVI port with the monitor's DVI port using a DVI cable doesn't work. I cannot figure out why this doesn't work.
    The DVI cable is good and the monitor's DVI port is good, as the connection does work using my friend's Intel Mini's DVI port connected to the monitor's DVI port using the DVI cable.
    The monitor is new, too, and otherwise works fine with my other Macs connected with the VGA port. (I've not tried the additional ports as yet.)
    Although the monitor is supposed to synchroize automatically, I also tried manually presetting the G4 Mini to different resolutions, but that didn't make any difference. The screen remains black when it should be showing the booting Apple icon.
    Any idea what is going wrong here, please, as it sounds as if this same thing occurs with various monitors?

  • Caps Lock Key not displayed when active on Key board for HP P7 1410

    How can I tell if my Caps Lock Key is active??

    Hello Again,
    If you click on the link below it shows you how to sync, and the instructions are pretty standard with other wireless devices we have. The little receiver that you have plugged into the computer might not have a button on it, but there should be a sync button on the bottom side of the keyboard.  
    Also after doing some research I was able to find out that less and less of our wireless keyboards are coming with the standard caps lock light. Also if the wording itself doesn't come up on the screen when you press the button and the keyboard is functioning as such then the keyboard doesn't provide that function.
    How To Sync
    Please respond at your earliest convenience.
    Thanks 
    Clicking the White Kudos star on the left is a way to say Thanks!
    Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

  • MacBook Pro (17-inch, Early 2011) doesn't wake the thunderbolt display after sleep

    for some reason the display when connected to clamshell macbook pro 17" doesn't wake up when i go to wake up the display from sleep mode.
    what is going on?

    The other day I got the blue screen, the fan going on high, and then when I disconnect my thunderbolt connection from my macbook pro - i get a shutdown.
    Today I got flickering followed by the fan on high and then again I disconneced my thunderbolt cable and after a minute or two a shudown.
    This never happened before.  Actually I was suprised to hear about a firmware update for flickering since that's never happened to me but since updating I now get the flicker.
    Any ideas??  Any help would be greatly appreciated as this is my work labtop.

  • Slow blinking caps lock, blank screen

    Only had this laptop for a week now, powered it up this morning, hard drive appears to run, fan is on but LCD screen stays dark and the caps lock is slow blinking (no apparent pattern).
    The model is: 2000-104CA
    Product: LV987UA#ABC
    Rev. : 3577-100
    Also, I tried removing the keyboard (after the fact) and the video instructions, located here: http://h20574.www2.hp.com/results.htm?SID=5059088&MEID=FAA31BDC-56B6-472D-BA7B-4295B0216628 seem incorrect.
    The instructions state to remove 1 5mm P1 screw, then press down with a probe tool in the hole indicated. All I ended up doing with pushing out the "insert" key. I can slightly lift that top side of the keyboard but there is definitely something locking down the keyboard around speaker mute/speaker + function keys.
    Can anyone enlighten me about these two problems?

    You will need to search Google or YouTube. Even then, you probably wont find the exact model you have. Most keyboard are lastly connected with a very fragile ribbon connector. Its usually 'locked' in with a sliding plastic piece right where the ribbon meets the motherboard.
    Again, search YouTube for a comparable video. It might help. Not sure what your inital issue is with the capslock-only blinking, but they do have a code search somewhere on this site. Search for 'laptop diagnostic codes' and you should find something that might explain what its doing.

  • Keyboard delete and caps lock keys not working after update

    Shortly after a windows update two keys, delete and caps lock do not work. I have tried the following
    1. system restore..it says it cannot restore as a file is missing. I have used this function before without any problem.
    2. Update key board driver (standard PS/2)..it says latest version is installed.
    3. Uninstall and reinstall.
    4. Reset using the remove batteryt hold down power key option.
    The caps lock and delete does not work in Notepad or MS Word.
    It seems unlikely that the two keys themselves are damaged as it is unlikely that they would both fail at the same time and the problem after the windows undate is suspicious.
    I am using Windows 7 Home premium on a 64 bit HP G62.
    help appreciated as ever
    thanks
    matyiii

    matyiii wrote:
    Thanks I am beginning to suspect the same thing. I will try keyboard replacement as a last resort.....no fun to buy a new key board and have the problem persist...
    regards
    Matyiii
    Here's another test...since your laptop has USB ports get or borrow a USB keyboard and try it and if all those keys work and test then the results would mean your laptop keyboard has stop functioning as least you narrow done the problem.
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • Selection screen display after role menu selection

    Hi,
    I have strange situation:
    - running a query on the WEB from Query Designer 3.5 first display a selection screen and then the data - what is OK or expected
    - but we created an application in WAD with just role menu - if we pick the same query, from the same role - the query is displayed without selection screen. After that the variable screen can be displayed, but we needed before the query is actually displayed (some variable are filled with user exit on selection screen, ...)
    Any idea?
    Thanks,
    Tomaz

    Tomaz,
    Have you checked the webtemplate properties in WAD where you can check - force selection screen display?
    Bob

  • CAPS LOCK on screen notification

    I have a Logitech (support no help) wireless keyboard (s530) for MAC, but I can find no provision for on screen notification of CAPS LOCK (none on keyboard) Is there some way that I can do this similar to the notification that the CAPS LOCK is on or off at log in?

    CAPS Warn was exactly what I was looking for...Macworld forum provide me that source also....
    This should do exactly what you're looking for:
    http://thewoodwards.us/sw/CAPSWarn/index.shtml
    Dan Frakes / Macworld Senior Editor / Playlist Reviews Editor

  • IMac locking up in Yosemite after sleep mode engaged

    iMac 27 locking up after sleep mode requiring full power shut down and rebooting in safe mode then shutting down and rebooting normally.. Permissions and this check show no errors, the only error sleep mode failure. Boot up is very slow as well as wake up when possible is slow. Yosemite seems to need a new release in order to correct the boot problems. System operates more like a Windows machine than Apple machine what's going on?

    In Ten (10) Crash logs it gives me the following reason:
    Process:               fontd [337]
    Path:                  /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/Support/fontd
    Identifier:            fontd
    Version:               375
    Code Type:             X86-64 (Native)
    Parent Process:        ??? [1]
    Responsible:           fontd [337]
    User ID:               501
    Date/Time:             2014-12-26 12:21:45.036 -0500
    OS Version:            Mac OS X 10.10.1 (14B25)
    Report Version:        11
    Anonymous UUID:        3D86DE4D-DF6F-C140-16F8-4F80DBCD6634
    Time Awake Since Boot: 250 seconds
    Crashed Thread:        2  Dispatch queue: Scanner Queue
    Exception Type:        EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes:       EXC_I386_GPFLT

  • PB 15" screen backlight after sleep problem

    I have an intermittent problem wherein my display backlight will not light sometimes upon waking up my PB from sleep. The backlight is totally out when this happens, not just dimmed. The laptop is on and the display itself is functioning (I can barely see the images on the dark screen) but the backlight is out. I have to press the power button for a second to get the "shut down" box, shut down the PB and restart it. During the boot process the screen backlight eventually relights. Anyone else having this problem?
    MB 17in, PB G4 15in, PB G4 12in, iMac G3, iBook G3, PB 1400c, PB 5300   Mac OS X (10.4.6)   Loyal to Apple since the Apple //+

    Try to replace inverter board.
    http://www.ifixit.com/cart/customer/product.php?productid=746&cat=&page=1
    Really easy to replace if yours is still under warranty then bring to nearest AASP or Apple store, If not then to replace inverter board you neew to use allen key to open 2 screws in the display open your display as wide as possible more than 90 degree and try to take the screws out.
    Then use plastic stick/nylon sticj to pry open the display along the light and dark grey plastic and after you open the display bezel you will see the inverter board located in the bottom of your display.
    Hope this help
    Flippo
    PS: I'm not responsible if you break anything during take apart. Just be carefull and take your time.

Maybe you are looking for